/[thuban]/branches/WIP-pyshapelib-bramz/ChangeLog

Diff of /branches/WIP-pyshapelib-bramz/ChangeLog

Parent Directory | Revision Log | View Patch Patch

-revision 1069 by bh,
Tue May 27 15:02:48 2003 UTC
+revision 1582 by bh,
Tue Aug 12 15:08:40 2003 UTC
 Line 1
+-08-12  Bernhard Herzog  <[email protected]>
+         * po/de.po: New. German translations by Bjoern Broscheit
+-08-12  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UnknownProjPanel._DoLayout): Translated
+         strings have to be one string literal.
+-08-11  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin.assertPointListEquals):
+         New. This method was used in various derived classes, but it's
+         better to have it here.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertPointListEquals): Removed. It's now in
+         FloatComparisonMixin
+         * test/test_layer.py (TestLayer.assertPointListEquals): Removed.
+         It's now in FloatComparisonMixin
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertPointListEquals): Removed. It's now
+         in FloatComparisonMixin
+-08-11  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Add missing space to
+         error message
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Now use authorgroup. Added revhistory
+         with version number.
+         Changed title to reflect version number of Thuban.
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Reworked the hall of fame. Now
+         the list corresponds to the "About" web page.
+-08-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/proj4dialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Make sure
+         translated strings are recognized as one string literal.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): Make
+         sure translated strings are recognized as one string literal.
+-08-07  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.RawShapeFormat): New.
+         Simply delegates to the original shapestore.
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.test_raw_format): New. Test case for
+         DerivedShapeStore.RawShapeFormat
+-08-07  Bernhard Herzog  <[email protected]>
+         Add raw data interface to shape objects.
+         * Thuban/Model/data.py (ShapefileShape, Shape): Rname the shape
+         class to ShapefileShape which now holds shapefile specific
+         information.
+         (ShapefileShape.compute_bbox): Simplified to not cache any
+         information. The way this method is used that shouldn't matter
+         performance wise.
+         (ShapefileShape.RawData): New. Return the shapeid which is the raw
+         data format for shapes from shapefiles.
+         (ShapefileStore.RawShapeFormat): New. Return the raw datatype used
+         in the shape objects returned by a shapestore. For a
+         ShapefileStore this is always RAW_SHAPEFILE.
+         (RAW_PYTHON, RAW_SHAPEFILE): Constants for the RawShapeFormat
+         method.
+         * test/test_shapefilestore.py
+         (TestShapefileStore.test_raw_format): New test to test the raw
+         format feature of shapes.
+         * Thuban/Model/layer.py: Remove the unused import of Shape from
+         data. It was only there for interface compatibility but it's not
+         used inside of Thuban and the generic Shape class has gone away.
+         * Thuban/UI/renderer.py (MapRenderer.low_level_renderer): Check
+         the raw data format and only use an optimized version of its a
+         shapefile.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/test_baserenderer.py (SimpleShape): Shape class for the
+         tests.
+         (SimpleShapeStore.Shape): Use SimpleShape instead of
+         Thuban.Model.data.Shape to make the tests independed of the coming
+         changes.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/support.py (SkipTest, ThubanTestResult, ThubanTestRunner)
+         (ThubanTestProgram): New classes that extend the respective
+         classes from unittest. These new version support skipping tests
+         under certain expected conditions. In the Thuban test suite we
+         uses this for tests that require the optional gdal support.
+         (run_tests): Use ThubanTestProgram instead of the unittest.main()
+         * test/runtests.py (main): Use the new ThubanTestRunner instead of
+         the normal one from unittest
+         * test/test_layer.py (TestLayer.test_raster_layer): If this test
+         is not run because gdal support isn't available report this to the
+         runner.
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_raster_no_projection): Do not run this test
+         if gdal support isn't available and report this to the runner.
+-08-06  Bernhard Herzog  <[email protected]>
+         Rearrange the renderers a bit, partly in preparation for changes
+         required for the postgis merge, partly to make it more testable.
+         Also make the representation of coordinates in Shapes more
+         consistent.
+         * Thuban/UI/renderer.py (MapRenderer): Most of the code/methods in
+         this class is now in BaseRenderer. This class is now practically
+         only a specialization of BaseRenderer for rendering to an actual
+         wx DC.
+         (ScreenRenderer.draw_shape_layer): Use self.low_level_renderer()
+         to get the shapetype specific rendering functions.
+         * Thuban/UI/baserenderer.py: New file with the basic rendering
+         logic. The code in this file is completely independend of wx.
+         (BaseRenderer): Class with the basic rendering logic
+         * test/test_baserenderer.py: New. Test cases for BaseRenderer
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         error_on_redraw to guard agains endless loops and stack overflows
+         when there's a bug in the rendering code that raises exceptions.
+         (MapCanvas.OnIdle, MapCanvas._do_redraw): Split the actual
+         rendering into a separate method _do_redraw so that error handling
+         is a bit easier. When an exception occurs, set error_on_redraw to
+         true. When it's true on entry to OnIdle do nothing and return
+         immediately.
+         * Thuban/Model/data.py (ShapefileStore.Shape): For consistency, a
+         Shape object will always have the coordinates as a list of list of
+         coordinate pairs (tuples).
+         (Shape.compute_bbox): Adapt to new representation.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at)
+         (ViewPort.LabelShapeAt): Adapt to new coordinate representation in
+         Shape objects.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertFloatTuplesEqual)
+         (ShapefileStoreTests.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestShapefileStoreArc.test_shape)
+         (TestShapefileStorePolygon.test_shape)
+         (TestShapefileStorePoint.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+         * test/test_layer.py (TestLayer.assertFloatTuplesEqual)
+         (TestLayer.assertPointListEquals): Rename to assertPointListEquals
+         and change purpose to checking equality of the lists returned by
+         Shape.Points().
+         (TestLayer.test_arc_layer, TestLayer.test_arc_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_point_layer)
+         (TestLayer.test_derived_store): Use the new assertPointListEquals
+         instead of assertFloatTuplesEqual
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertFloatTuplesEqual)
+         (TestDerivedShapeStore.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestDerivedShapeStore.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+-08-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (UTMPanel._OnPropose): Added test for
+         a bounding box. A dialog is raised in case, no bounding box
+         is found. This fixes bug #2043:
+         https://intevation.de/rt/webrt?serial_num=2043
+-08-05  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/color.py (Color.__repr__): Make the repr of a color
+         object look like a Color instantiation. Formerly it looked like a
+         tuple.
+         * test/test_color.py (TestColor.test_repr)
+         (TestColor.test_equality, TestColor.test_inequality): New. test
+         some more apects of the Color class
+         (TestTransparent.test_repr, TestTransparent.test_hex)
+         (TestTransparent.test_equality): New. Test cases for the
+         Transparent object.
+-08-04  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: a number of small improvements.
+         The resulting file is the version submitted for GREAT-ER II.
+-08-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/resource.py, Thuban/UI/projdialog.py,
+         Thuban/UI/join.py, Thuban/UI/classgen.py, Thuban/UI/about.py,
+         Thuban/Model/resource.py: Insert cvs keywords and doc-strings.
+         * Thuban/UI/common.py: Insert cvs keywords and doc-strings.
+         (Color2wxColour, wxColour2Color, ThubanBeginBusyCursor)
+         (ThubanEndBusyCursor): Add doc-strings
+-08-01  Bernhard Herzog  <[email protected]>
+         First step towards PostGIS integration. More abstraction by movin
+         more code from the layer to the shapestore. More methods of the
+         layer are now simply delegated to the equivalent method of the
+         shapestore. The SHAPETYPE_* constants are now in data not in
+         layer.
+         * Thuban/Model/data.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Move these constants and classes from
+         layer.py to data.py
+         (ShapefileStore.__init__): More Initialization for the new methods
+         and functionality.
+         (ShapefileStore.ShapeType, ShapefileStore.NumShapes)
+         (ShapefileStore.BoundingBox, ShapefileStore.ShapesInRegion)
+         (ShapefileStore.Shape): New methods that were formerly implemented
+         in the layer.
+         (DerivedShapeStore.Shape, DerivedShapeStore.ShapesInRegion)
+         (DerivedShapeStore.ShapeType, DerivedShapeStore.NumShapes)
+         (DerivedShapeStore.BoundingBox): New. DerivedShapeStore
+         equivalents of the new shape methods. These versions are simply
+         delegated to the original shapstore.
+         * Thuban/Model/layer.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Removed. They're now in data.py
+         (Layer.SetShapeStore): Removed the initializatin of instance
+         variables that were needed for the stuff that's now in
+         ShapefileStore
+         (Layer.BoundingBox, Layer.NumShapes, Layer.ShapeType)
+         (Layer.Shape, Layer.ShapesInRegion): Simply delegate to the
+         shapestore.
+         * Thuban/UI/classifier.py, Thuban/UI/renderer.py,
+         Thuban/UI/viewport.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         * test/test_shapefilestore.py: New. Tests for ShapefileStore.
+         * test/test_derivedshapestore.py: New. Tests for DerivedShapeStore.
+         * test/test_layer.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         (TestLayer.test_derived_store): Remove the test for the exception
+         when instantiating the DerivedShapeStore with an incompatible
+         table which is now in test_derivedshapestore.py. Add some more
+         tests of the layer methods to determine whether they work for a
+         DerivedShapeStore as well.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the list of required packages
+         by just listing the name and where they can be found.
+-07-31  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml:
+         Changed the screenshot elements to figure.
+         Changed some variablelist elements to itemizedlist.
+         Added section on GDAL formats.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added a few sentences about
+         the Fix Border Color option when generating classes.
+-07-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Add docstrings. Rename specific
+         Ramp instances to use lower_case_style.
+         * Thuban/UI/classgen.py: Use renamed Ramp instances.
+         * Thuban/UI/classifier.py: Add docstrings.
+         * Thuban/UI/dock.py: Add docstrings.
+         * test/test_classgen.py: Use renamed Ramp instances.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (QueueingPublisher): Removed. This class
+         was never used in Thuban.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Use the table's Title()
+         method directly instead of going through the transient_table
+         method. This faster because transient_table may force the copy of
+         a DBF file into the transient database and setting a table's title
+         doesnm't affect the title of the associated transient table, so
+         this fixes RT #2042
+         * Thuban/UI/main.py (__version__): Don't import the already
+         removed show_exception_dialog.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Put back this method and remove the equivalent function since we
+         are setting the exception hook from within this class (OnInit).
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/5_2_custom_ramp.png,
+         Doc/manual/images/5_2_quantiles.png,
+         Doc/manual/images/5_2_uniform_dist.png,
+         Doc/manual/images/5_2_unique_values.png,
+         Doc/manual/images/8_int_error.png: New screen shots.
+         * Doc/manual/thuban-manual.xml: Fixed typos and wording, clarified
+         some points, and added more screen shots.
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py: Remove the now unused import of warnings
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (SimpleStore): Removed. This class has been
+         deprecated since before the 0.8 release and isn't used in Thuban
+         itself anymore.
+         * Thuban/Model/transientdb.py: Remove some unnecessary imports
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OnInit): set the
+         python exception hook here so that we are sure to catch any
+         Thuban exception that happen during initialization.
+         * Thuban/UI/main.py (main): Don't set the exception hook here,
+         it will get set in ThubanApplication.OnInit.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Removed and called it show_exception_dialog() so that the exception
+         handler can be set before the class is created.
+         * Thuban/UI/main.py (main): Install the exception handler before
+         a ThubanApplication is created.
+-07-29  Bernhard Herzog  <[email protected]>
+         * po/it.po: New. Italian translation by Maurizio Napolitano
+         * po/ru.po: New. Russian translation by Alex Shevlakov
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Extended section on supported
+         projections.
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: gaspell-checked.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/3_5_legend.png: Added border to improve look
+         on white background.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fixed grammar and typos. Added
+         descriptions for the legend toolbar.
+         * Doc/manual/images/4_2_raster_layer_properties.png: Removed
+         cursor from dialog box.
+-07-28  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: More screenshots and more chapters.
+         * Doc/manual/images/2_4_session_tree.png,
+         Doc/manual/images/3_5_legend.png, Doc/manual/images/3_rename_map.png,
+         Doc/manual/images/4_2_layer_properties.png,
+         Doc/manual/images/4_2_raster_layer_properties.png,
+         Doc/manual/images/5_3_genclass.png,
+         Doc/manual/images/5_classification.png,
+         Doc/manual/images/6_projection.png,
+         Doc/manual/images/7_1_table_view.png,
+         Doc/manual/images/7_2_5_join.png: New screenshots.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Chapter on Projection Management.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added EPS images and wrote
+         chapter on Layer Management.
+         * Doc/manual/Makefile: New. Makefile to generate all formats for the
+         manual and images.
+-07-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/range.py, Thuban/version.py: Remove the #! line as
+         it annoys lintian which warns about these files not being
+         executable. The #1 isn't necessary here since if you absolutely
+         must execute them you can always say "python <filename>".
+         * Thuban/UI/renderer.py (ScreenRenderer.draw_shape_layer): Remove
+         superfluous code to set brush and pen for point shapes
+         * Thuban/UI/viewport.py: Remove commented out code that wouldn't
+         belong in viewport anyway
+-07-24  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added section on table management.
+-07-24  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Recognize the long "verbose" option
+         correctly.
+-07-22  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Continue to write first revision
+         of the manual.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Wrap method
+         with Begin/EndDrawing() calls to ensure we aren't doing to
+         many updates to the dc during rendering.
+         (ScreenRenderer.draw_shape_layer): self.draw_point_shape takes
+         a pen and brush argument so they need to be passed to the function.
+         * Thuban/UI/viewport.py (ViewPort.calc_min_max_scales): New.
+         Calculates the minimum and maximum scale values. Factored out
+         of set_view_transform so that it could be used to zoom all the
+         way into a single point.
+         (ViewPort.set_view_transform): Call calc_min_max_scales().
+         (ViewPort.FitSelectedToWindow): Zoom to the maximum scale
+         if only a single point is selected.
+         * Doc/manual/images/1_2_legend_close.png,
+         Doc/manual/images/1_2_legend_dock.png,
+         Doc/manual/images/1_2_mainwindow.png,
+         Doc/manual/images/1_2_mainwindow.ps,
+         Doc/manual/images/1_2_mainwindow.sk,
+         Doc/manual/images/3_2_fullextent.png,
+         Doc/manual/images/3_2_fulllayerextent.png,
+         Doc/manual/images/3_2_fullshapeextent.png,
+         Doc/manual/images/3_2_pan.png,
+         Doc/manual/images/3_2_zoomin.png,
+         Doc/manual/images/3_2_zoomout.png,
+         Doc/manual/images/3_3_identify.png,
+         Doc/manual/images/3_3_label.png,
+         Doc/manual/images/3_5_invisible.png,
+         Doc/manual/images/3_5_movedown.png,
+         Doc/manual/images/3_5_moveup.png,
+         Doc/manual/images/3_5_props.png,
+         Doc/manual/images/3_5_tobottom.png,
+         Doc/manual/images/3_5_totop.png,
+         Doc/manual/images/3_5_visible.png: New. Images for the documentation.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/messages.py (MAP_REPLACED): New message.
+         * Thuban/UI/viewport.py (ViewPort.SetMap): Issue MAP_REPLACED
+         after the new map has been assigned
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages):
+         Delegate MAP_REPLACED to the canvas too
+         (MainWindow.prepare_new_session): Removed. Thanks to the new
+         MAP_REPLACED message it's no longer needed
+         (MainWindow.OpenSession, MainWindow.NewSession):
+         prepare_new_session has been removed.
+         * Thuban/UI/classifier.py (Classifier.__init__): Subscribe to
+         MAP_REPLACED so that we can close the dialog if a new map is set.
+         (Classifier.unsubscribe_messages): Unsubscribe from MAP_REPLACED
+         (Classifier.map_replaced): Handle MAP_REPLACED by closing the
+         dialog
+         * test/test_viewport.py (SimpleViewPortTest)
+         (SimpleViewPortTest.test_default_size): Add doc-strings
+         (ViewPortTest.setUp): Bind map to self.map so we can use it in
+         tests. Subscribe to MAP_REPLACED messages too.
+         (ViewPortTest.tearDown): No need to explicitly unsubscribe
+         (ViewPortTest.test_set_map): New test for the SetMap method.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (SimpleViewPortTest.test_default_size):
+         Move this test from ViewPortTest.setUp to this new separate test
+         case. setUp is not the place for the actual tests.
+         (ViewPortTest.test_inital_settings, ViewPortTest.setUp): Move some
+         more of the test from setUp to the new test test_inital_settings.
+         (ViewPortTest.test_win_to_proj, ViewPortTest.test_proj_to_win)
+         (ViewPortTest.test_proj_conv): Split test_proj_conv into
+         test_win_to_proj and test_proj_to_win and make the tests easier to
+         understand
+         (ViewPortTest.testFitRectToWindow, ViewPortTest.testZoomFactor)
+         (ViewPortTest.testZoomOutToRect, ViewPortTest.testTranslate)
+         (ViewPortTest.test_unprojected_rect_around_point)
+         (ViewPortTest.test_find_shape_at, ViewPortTest.testTools):
+         Reformat to increase readability.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnLeftDown): Capture the mouse.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/runtests.py: The test suite can now be run without an X
+         connection. To make sure this remains true, remove the DISPLAY
+         environment variable so that an error occurs if the wxGTK is
+         imported accidentally
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py: Remove unused imports
+         * Thuban/UI/view.py: Remove unused imports
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_export.py Remove unused imports. The OutputTransform
+         function is now in viewport.py and is called output_transform
+         (TestScalebar.test_output_transform)
+         (TestScalebar.test_OutputTransform): Renamed to
+         test_output_transform and updated to use output_transform instead
+         of OutputTransform
+         * Thuban/UI/view.py (OutputTransform): Moved to viewport.py and
+         renamed.
+         (MapCanvas.Export, MapPrintout.draw_on_dc): OutputTransform was
+         renamed to output_transform
+         * Thuban/UI/viewport.py (OutputTransform, output_transform):
+         Rename to output_transform
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.__init__): Rename
+         classificationField to classificatin_column and init it here so
+         that it can be used in SetClassificationColumn
+         (Layer.GetClassificationColumn, Layer.GetClassificationField):
+         Rename to GetClassificationColumn.
+         (Layer.SetClassificationColumn, Layer.SetClassificationField):
+         Rename to SetClassificationColumn and issue a LAYER_CHANGED
+         message if the column changes.
+         (Layer._classification_changed, Layer.ClassChanged): Rename to
+         _classification_changed. Update the callers.
+         (Layer.SetShapeStore): Further field->column renames.
+         * Thuban/Model/load.py (SessionLoader.start_classification)
+         (SessionLoader.start_clpoint): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/Model/save.py (SessionSaver.write_classification): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/classifier.py (Classifier.__init__)
+         (Classifier._OnTry, Classifier._OnRevert): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Updates because
+         of field->column method name changes in the Layer class
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.testClassifiedLayer): Update because of
+         field->column method name changes in the Layer class
+         * test/test_layer.py (SetShapeStoreTests.setUp)
+         (SetShapeStoreTests.test_sanity): Update because of field->column
+         method name changes in the Layer class
+         (TestLayerModification.setUp): Subscribe to LAYER_CHANGED as well
+         (TestLayerModification.test_sanity)
+         (TestLayerModification.test_initial_settings): remove unsued code
+         and rename to test_sanity.
+         (TestLayerModification.test_set_classification): New test for
+         SetClassification and SetClassificationField.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_classgen.py (TestFixedRamp.test): Extend test to check
+         the non-fixed values as well. The old test would have accepted a
+         fixed ramp that only returnes the fixed properties
+-07-17  Jonathan Coles   <[email protected]>
+         * Doc/manual/mainwindow.png, Doc/manual/mainwindow.xcf: Screen
+         shots for the manual. The XCF file is the source image and
+         has additional layers to support changes.
+         * Doc/manual/thuban-manual.xml: Wrote an initial Introduction.
+         * Thuban/UI/classifier.py (Classifier.__BuildClassification):
+         Return both the new class and the field name.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Don't
+         fit the map to the window as this changes any zoom level that
+         the user may have set.
+-07-16  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles): Remove
+         fixes parameter, but maintain the same functionality by having
+         the calling function pass a FixedRamp object for the ramp.
+         (FixedRamp): New. Adapts a ramp to have fixed property values.
+         * Thuban/Model/classification.py: Use new CLASS_CHANGED message.
+         (Classification): Inherit from Publisher.
+         (Classification.__init__): Remove the layer parameter.
+         Classifications no longer need to have a parent layer.
+         (Classification.GetField, Classification.GetFieldType,
+         Classification.SetFieldInfo): Removed. The field name is stored
+         in the layer, and the type can be retreived by calling
+         Layer.GetFieldType().
+         (Classification._set_layer, Classification.GetLayer): Removed.
+         Classifications no longer have a parent layer.
+         * Thuban/Model/layer.py (Layer.Destroy): Unsubscribe from the
+         classification.
+         (Layer.SetShapeStore): Reset the classification first while
+         we still have the old shape store to work with.
+         (Layer.GetClassificationField, Layer.SetClassificationField):
+         New. Method for getting/setting the field to classify on.
+         (Layer.SetClassification): Simplified now that the layer
+         simply has to hold a reference to the classification and not
+         tell the classification who owns it.
+         Fixes RTbug #2023.
+         * Thuban/Model/load.py (SessionLoader.start_classification):
+         Set the field name on the layer, not the classification.
+         * Thuban/Model/messages.py: Add CLASS_CHANGED for when a
+         classification is modified.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Get the field name and type from the layer.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Renamed
+         parameter records to rows and add docstring. Fixes RTbug #1997.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Use a fixed
+         ramp when we need to fix certain values of a ramp rather than
+         using the old fixes parameter. Fixes RTbug #2024.
+         * Thuban/UI/classifier.py (ClassGrid.CreateTable): Add fieldType
+         parameter.
+         (ClassTable.Reset): Add fieldType parameter and use it, rather
+         than asking the classification.
+         (Classifier.__init__): Remember the original class's field
+         and ask the layer for the field type, rather than the classification.
+         (Classifier.__SetGridTable): Retrieve the field and field type
+         for the table because they are not in the classification.
+         (Classifier._OnTry, Classifier._OnRevert): Set the classification
+         field on the layer in addition to the classification itself.
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Get the
+         classification field from layer.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Get the
+         classification field from layer. Split up tests and remove
+         *-imports. Fixes RTbug #1992.
+         * test/test_classgen.py (TestFixedRamp): Test for the FixedRamp class.
+         * test/test_classification.py
+         (TestClassification.test_classification): Remove tests for methods
+         that no longer exist.
+         * test/test_layer.py (SetShapeStoreTests.setUp): Classification
+         __init__ no longer has a field parameter, use SetClassificationField.
+         (SetShapeStoreTests.test_sanity): Use layer object to get class
+         field info.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Use
+         SetClassificationField on layer to set class field info.
+         * test/test_viewport.py: Renamed from test/test_view.py.
+-07-16  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added authors and an initial
+         coarse structure.
+-07-15  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin): This is a mix-in class
+         and therefore should not be derived from any other class.
+         * test/test_range.py (RangeTest): FloatComparisonMixin is a
+         mix-in, so derive from TestCase as well.
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Rework the
+         draw_func handling a bit to remove one layer of indirection. This
+         makes the renderer about 10% faster in the non-classifying case
+         and the code a bit cleaner
+         (MapRenderer.draw_point_shape): Add the pen and brush parameters
+         and set them in the dc. Now the draw_point_shape method and
+         wxproj's draw_polygon_shape function have basically the same
+         signature so that both can be directly used as draw_func
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/save.py (SessionSaver.write_classification): Encode
+         string values (in addition to the labels) as UTF 8
+         * Thuban/Model/load.py (SessionLoader.start_clpoint): Decode the
+         values if the field type is string
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Test
+         saving a session with non-ascii string classification values.
+         * test/test_load.py (TestClassification.file_contents)
+         (TestClassification.test): Check for non-ascii values in string
+         classifications
+-07-14  Jonathan Coles   <[email protected]>
+         * test/test_view.py: New. Tests for ViewPort.
+-07-14  Frank Koormann   <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.start_map): Encode map
+         title to latin1.  Fixes https://intevation.de/rt/webrt?serial_num=2013
+         * test/test_load_0_8.py (TestUnicodeStrings): New, test load of
+         unicode strings from session file: session title, map title and
+         projection name.
+-07-10  Jonathan Coles   <[email protected]>
+         * Thuban/UI/viewport.py (Tool.MouseUp): Should have called
+         drag_stop, not drag_move when the mouse is released.
+-07-10  Jonathan Coles   <[email protected]>
+         The most important part of this is the seperation of view.py into
+         two pieces. viewport.py now has a class called ViewPort which
+         contains all the non-wx parts of view.py and can therefore be
+         tested. view.py contains only the wx-specific parts and is fairly
+         simple.
+         * Thuban/UI/view.py: Stripped out all non-wx functionality. Fixes
+         RTTbug #1992.
+         * Thuban/UI/viewport.py: New. Contains non-wx view functionality.
+         RTTbug #1992.
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles):
+         Added 'fixes' parameter so that property attributes can
+         be held constant over the generated classification groups.
+         (CustomRamp.GetProperties): Remove unused variables.
+         * Thuban/Model/map.py (Map.SetProjection): Send the old
+         projection as an argument to listeners of the MAP_PROJECTION_CHANGED
+         event.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Added 'records'
+         parameter which is a list of records that restricts which
+         records are saved. Fixes RTbug #1997.
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Port exception dialog from GREAT-ER. Fixes RTbug #1993.
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__): Add controls
+         to allow the user to fix line color/width on generated groups.
+         (ClassGenDialog.OnOK): Use new 'fixes' parameter of the generate_*
+         functions to optionally fix group properties.
+         * Thuban/UI/main.py (main): Set exception hook to the
+         ShowExceptionDialog. Fixes RTbug #1993.
+         * Thuban/UI/mainwindow.py (MainWindow.ShowTableView): Raise
+         the table window when it is selectd to be shown.
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): Add an
+         Export Selection button and move the export buttons underneath
+         the table.
+         (QueryTableFrame.UpdateStatusText): Added event argument so
+         that it can respond to grid selection events. The status text
+         is now updated even when the table is not associated with a
+         layer as was previously assumed.
+         (QueryTableFrame.OnGridSelectRange, OnGridSelectCell): Removed.
+         UpdateStatusText responds to these events.
+         (QueryTableFrame.OnSaveAs): Renamed to doExport.
+         (QueryTableFrame.doExport): Helper function that saves the
+         entire table, or selected rows, to a file.
+         (QueryTableFrame.OnExport, QueryTableFrame.OnExportSel): New.
+         Respond to export button events and call doExport.
+         * extensions/thuban/gdalwarp.cpp (ProjectRasterFile): Make sure
+         the function doesn't return NULL without first setting a Python
+         Error.
+         * test/runtests.py (main): Only print "Unknown option" for
+         unsupported options.
+         * test/support.py (FloatComparisonMixin.assertFloatEqual): Take
+         optional epsilon argument to specify floating point accuracy.
+         (FloatComparisonMixin.assertFloatSeqEqual): Call assertFloatEqual
+         for each item test.
+         * test/test_csv_table.py (TestCSVTable.test_table_to_cvs): Add
+         tests for saving selected records.
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         tests for saving selected records.
+         * test/test_map.py (TestMapWithContents.test_set_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_session.py
+         (TestSessionWithContent.test_forward_map_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_table.py (TableTest): Update tests to use non-deprecated
+         functions.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientTableBase.Width): The type
+         constants in the column objects are the standard ones defined in
+         the table module.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transienttable_to_dbf): New. Test whether
+         exporting transient tables as DBF works. This should catch the bug
+         just fixed in TransientTableBase.Width.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classgen.py (CustomRamp.GetProperties): Compute the
+         interpolated colors correctly.
+         * test/test_classgen.py (TestCustomRamp.test_color_interpolation):
+         New. Test case for the fix in classgen.py
+-07-08  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Make the default output less verbose
+         and add a verbosity option (-v) to get the old output
+-07-08  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.9.dtd: New. This will become the DTD for
+.9.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.JoinType):
+         New. Return the join type
+         * Thuban/Model/save.py (SessionSaver.write_session): Use new 0.9
+         DTD
+         (SessionSaver.write_data_containers): Save the join type for
+         joined tables
+         * Thuban/Model/load.py (SessionLoader.__init__): Add the new 0.9
+         namespace
+         (SessionLoader.start_jointable): Handle the jointype attribute
+         * test/test_load_0_8.py: New. Effectively a copy of test_load.py
+         as of Thuban 0.8. These are now tests to determine whether Thuban
+         can still read files generated by Thuban 0.8
+         * test/test_load.py (LoadSessionTest.dtd)
+         (TestSingleLayer.file_contents)
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestJoinedTable.file_contents)
+         (TestLoadError.file_contents): Update for new DTD
+         (TestJoinedTable.file_contents, TestJoinedTable.setUp): Add test
+         for new join type attribute
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Update for new DTD
+         (SaveSessionTest.test_joined_table): Add test for new join type
+         attribute
+-07-04  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (_find_dbf_column_names): New. Helper
+         function for table_to_dbf
+         (table_to_dbf): Deal with names longer than the 10 character limit
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         doc-string
+         (TestTableToDBF.test_table_to_dbf_long_col_names): New test for
+         long column names
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the CVS Revision Tag syntax
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml, Doc/manual/README: New. Skeleton
+         for the Thuban manual and README with some basic information about
+         the manual
+-07-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__init__):
+         Update doc-string
+         (TransientJoinedTable.create): Do not modify the column objects of
+         the input tables in place and copy all columns of the input tables
+         into the joined table after all.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_name_collisions_dont_modify_in_place):
+         New test case for a bug which modified the column objects in place
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): Make sure maxValue isn't less than
+         one, otherwise we could divide by zero.
+         * test/test_classgen.py (ClassGenTest.doClassRangeTest,
+         ClassGenTest.doClassSingleTest): Call doBoundsTest to
+         check the end classification groups against the
+         proper property values.
+         (ClassGenTest.doBoundsTest): New. Checks the first and
+         last classification groups to make sure their properties
+         are the correct upper and lower bounds for a color ramp.
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): The denominator was one to high when
+         calculating the index for the ramp causing the index
+         to never to reach one.
+-07-02  Jonathan Coles   <[email protected]>
+         Changed the singature of ClassGroupRange.__init__ and
+         ClassGroupRange.SetRange() so that the min/max values are
+         passed as a tuple. This makes a better calling scheme for
+         when a Range object is passed instead.
+         * Thuban/Model/classgen.py: Fixed parameters to
+         ClassGroupRange constructor.
+         * Thuban/Model/classification.py (ClassGroupRange.__init__):
+         Consolidate the min/max parameters into a single _range which
+         can either be a tuple or a Range object.
+         (ClassGroupRange.SetRange): Consolidate the min/max parameters
+         into a single _range which can either be a tuple or a Range object.
+         * Thuban/Model/load.py (SessionLoader.start_clrange): Fix
+         call to ClassGroupRange constructor to use a tuple.
+         * Thuban/Model/layer.py (Layer.SetClassification): Switch
+         the classification instance variable to the new class
+         before calling _set_layer otherwise subscribers to a
+         LAYER_CHANGED event will not see any difference.
+         * test/test_classification.py: Fix tests of ClassGroupRange
+         so that they use the new signature.
+         * test/test_load.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_load_0_2.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_save.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+-07-01  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Fixes RTbug #1972, 1971.
+         Import used objects/class from color.
+         (generate_singletons): We don't
+         need the numGroups parameter anymore because we are using
+         the new ramps with GetProperties().
+         (generate_uniform_distribution): Use new ramp method
+         GetProperties().
+         (generate_quantiles, GenQuantiles0): Use new ramp method
+         GetProperties().
+         (CustomRamp.SetNumGroups): Removed. The ramps now map
+         a value from 0 to 1 to class properties so the number
+         of groups is not needed ahead of time.
+         (CustomRamp.next): Removed. CustomRamp does not support
+         interation anymore.
+         (CustomRamp.GetProperties): Returns a ClassGroupProperties
+         object based on the index value from 0 to 1 that is
+         passed to it.
+         (GreyRamp, RedRamp, GreenRamp, BlueRamp, GreenToRedRamp):
+         Made into instances of Monochromatic class instread of
+         deriving from it.
+         (HotToCold.SetNumGroups): Removed. See CustomRamp.
+         (HotToCold.next): Removed. See CustomRamp.
+         * Thuban/Model/classification.py: Fixes RTbug #1973, 1971.
+         (Classification.SetField, Classification.SetFieldType):
+         Replaced with SetFieldInfo.
+         (Classification.SetFieldInfo): New. Does a better job of
+         what SetField and SetFieldType used to do by combining
+         their function since they should really always be done
+         at the same time.
+         (Classification.SetLayer): Renamed to _set_layer.
+         (Classification._set_layer): Should only be called from
+         Layer's SetClassification. This does not cause a recursive
+         call as SetLayer did because we know that Layer knows about
+         the classification.
+         * Thuban/Model/color.py: Fixes RTbug #1971.
+         (_Transparent): Renamed from Transparent so it doesn't
+         conflict with the module variable.
+         (Transparent, Black): Renamed from Color.Transparent,
+         Color.Black so they are not class variables.
+         * Thuban/Model/layer.py: Fixes RTbug #1971, 1973.
+         (Layer.Destroy): We don't need to call SetClassification
+         anymore to clear out the back reference in the classifcation
+         to the layer. It's better to set it to None using _set_layer,
+         and we won't be creating another clas object too.
+         (Layer.SetClassification): Classification._set_layer is not
+         recursive so remove all the locking variables. Also clean
+         up the code so that it remains unchanged if something fails.
+         * Thuban/Model/load.py: Fixes RTbug #1971.
+         (SessionLoader.start_classification): Call
+         Classification.SetFieldInfo().
+         * Thuban/Model/save.py: Removed import of Color which wasn't
+         being used.
+         * Thuban/UI/classgen.py: Fixes RTbug #1972.
+         (ClassGenDialog.__init__): Color ramps are now instances
+         already so we don't need to create any new objects.
+         (ClassGenDialog.OnOK): Check for numGroups is no longer
+         necessary because we never use it.
+         * Thuban/UI/classifier.py: Fixes RTbug #1971.
+         (Classifier.__BuildClassification, Classifier.__SetGridTable):
+         Call Classification.SetFieldInfo() instead of SetFieldType.
+         * Thuban/UI/renderer.py: Fixes RTbug #1971.
+         * Thuban/UI/view.py: Fixes RTbug #1974, 1971.
+         (MapCanvas.__init__): Subscribe to the idle time event. Set
+         background color to white.
+         (MapCanvas.OnPaint): Set a flag indicating that we should
+         render the map during idle time. If we already have a bitmap
+         just draw it now.
+         (MapCanvas.OnIdle): New. Render the map only during idle time.
+         This also fixes a problem with the busy cursor under gtk.
+         * test/test_classgen.py (ClassGenTest.test_generate_singletons):
+         Fix calls to generate_singletons because the signature changed.
+         * test/test_classification.py: Fix color references and
+         change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+         * test/test_load.py: Fix color references.
+         * test/test_load_0_2.py: Fix color references.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer):
+         Change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+-07-01  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         New. Test join of two tables with partly equal column names.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create):
+         If duplicates in left and right tables column names are found,
+         append '_' (underscores) to the name until it is unique.
+         Create always new internal names for the resulting table and reference
+         columns in the join statement with <table>.<column>
+-07-01  Bernhard Herzog  <[email protected]>
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         New. Test whether joining on columns with the same names in both
+         tables works.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create): Make
+         sure to use the right internal names even when joining on field
+         with the same names in both tables. Also, detect duplicate names
+         in the joined table correctly.
+-07-01  Frank Koormann   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Reverse List of layers to render in same order as in desktop legend.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py (make_tuple): Takes a version string
+         and splits it into a tuple of at most three integers.
+         Used make_tuple() to make tuple versions of the version
+         numbers.
+         * Thuban/UI/about.py: Add Thuban email addresses.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: SQLite/PySQLite version dependencies
+         were too high.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: Update version to 0.8.1
+         * MANIFEST.in: Added Projections so that default.proj is
+         included.
+-06-26  Jonathan Coles   <[email protected]>
+         New About box with lots more information including library
+         versions and credits. More/better version checking before
+         Thuban starts.
+         * Thuban/UI/about.py: New. New About box that displays
+         library version information and credits.
+         * Thuban/version.py: Added new 'versions' dictionary which
+         contains the verions of various libraries which are checked
+         when the module loads.
+         (verify_versions): Check all version numbers and returns
+         a list of errors.
+         * Thuban/UI/classifier.py (Classifier.__EnableButtons):
+         Reset the status of the buttons as the situation warrants,
+         but in a better more reliable way by not relying on the
+         current status to determine what needs to change.
+         * Thuban/UI/main.py (wxCHECK_VERSION): Removed. Not needed.
+         (verify_versions): Remove most of the code since it is
+         now in Thuban.version.verify_versions.o
+         * Thuban/UI/mainwindow.py (MainWindow.About): Call new
+         About box in Thuban.UI.about.
+         * extensions/thuban/gdalwarp.cpp (get_gdal_version): New.
+         Returns the version of gdal library being used as a string.
+         * extensions/thuban/wxproj.cpp (check_version, check_version_gtk):
+         Removed.
+         (get_proj_version): Return the version of PROJ that the file
+         was compiled with.
+         (get_gtk_version): Return th version of GTK that the file
+         was compiled with.
+-06-25  Jonathan Coles   <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.EditSymbol): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         (ClassGroupPropertiesCtrl.DoEdit): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         * Thuban/UI/resource.py: Cleaned up how we determine file
+         extensions.
+         (GetImageResource): Return an wxImage from our Resources.
+-06-24  Jonathan Coles   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Check that a layer has a classification before trying
+         to get it. Raster layers don't have classifications.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.py: Add Resources/XML to resource list.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.cfg: Fix copyright dates
+-06-23  Jonathan Coles   <[email protected]>
+         * MANIFEST.in: Update with Resources/XML
+         * setup.py: Don't include Locale resources yet as we don't
+         have any and it causes problems building the distribution
+         for Windows. Update version to 0.8.0.
+         * Doc/thuban.dtd: Removed since it is now in Resources/XML.
+         * Thuban/UI/mainwindow.py: Add blank line at the end because
+         file was not being read correctly building the Windows
+         distribution.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.About): Fix text.
+         * Thuban/version.py: Temporarily update longversion for
+         the 0.8 release so that it doesn't have the cvs revision.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/common.py (ThubanBeginBusyCursor): Call wxSafeYield
+         to make sure that we don't create reentrant possibilities with
+         wxYield.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxBeginBusyCursor()
+         directly to avoid the wxSafeYield() call which generates an
+         OnPaint event causing infinite recursion. Don't try to catch
+         exception anymore. This was for before there were limits on map
+         scaling.
+-06-23  Bernhard Herzog  <[email protected]>
+         Bug fix for RT #1961:
+         * Thuban/Model/load.py (SessionLoader.start_derivedshapesource):
+         Register DerivedShapestores with the session
+         * Thuban/Model/session.py (Session.Tables): Make sure each table
+         is only listed once.
+         * test/test_load.py (TestJoinedTable.test): Add check_format call.
+         Update file contents to match the one written out.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/xmlsupport.py (SaxEventLister.startElementNS)
+         (SaxEventLister.endElementNS): Do not include the qname. Python
+.2.1 and 2.2.2 and 2.2.3 differ in this regard. In 2.2.1 qname it
+         is (presumably incorrectly) None, whereas it's a string with the
+         element name in the later versions.
+         * test/test_xmlsupport.py (TestEventList.test_even_list_simple)
+         (TestEventList.test_even_list_namespace): Update tests to reflect
+         the new behaviour
+         (TestEventList.test_even_list_id_normalization): Fix doc-string
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/layer.py (BaseLayer.HasShapes): New. Overridden
+         by deriving classes to determine if that layer supports shapes.
+         (Layer): Override HasShapes and return true.
+         * Thuban/UI/classgen.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (GenUniquePanel._OnRetrieve): Set busy cursor while retrieving
+         table data.
+         * Thuban/UI/common.py (ThubanBeginBusyCursor, ThubanEndBusyCursor):
+         New. Wrappers around the wxWindows functions that allow us to
+         make additional calls such as wxYield which gives the native
+         system a chance to update the cursor correctly.
+         * Thuban/UI/tableview.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         * Thuban/UI/view.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (MapCanvas.find_shape_at): Check if the current search layer
+         support shapes, otherwise go on to the next layer.
+         * test/test_layer.py: Add tests in each type of layer for
+         HasClassification() and HasShapes()
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxYield after
+         turning on the busy cursor to allow the system to change the
+         cursor before we begin painting. This fixes a problem that
+         was occuring only under GTK. Fixes RTbug #1840.
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.8.dtd: New DTD for the new file format
+         version.
+         * Thuban/Model/save.py (sort_data_stores): New. Make topological
+         sort of the data sources so they can be written with sources that
+         data sources that depend on other data sources come after the
+         sources they depend on.
+         (SessionSaver.__init__): Add idmap instance variable to map from
+         objects to the ids used in the file.
+         (SessionSaver.get_id, SessionSaver.define_id)
+         (SessionSaver.has_id): New. Methods to manage the idmap
+         (SessionSaver.write): Use thuban-0.8.dtd
+         (SessionSaver.write_session): Add a namespace on the session and
+         write out the data sources before the maps.
+         (SessionSaver.write_data_containers): New. Write the data
+         containers.
+         (SessionSaver.write_layer): Layer elements now refer to a
+         shapestore and don't contain filenames anymore.
+         * Thuban/Model/load.py (LoadError): Exception class to raise when
+         errors in the files are discovered
+         (SessionLoader.__init__): Define dispatchers for elements with a
+         thuban-0.8 namespace too.
+         (SessionLoader.check_attrs): New helper method to check and
+         convert attributes
+         (AttrDesc): New. Helper class for SessionLoader.check_attrs
+         (SessionLoader.start_fileshapesource)
+         (SessionLoader.start_derivedshapesource)
+         (SessionLoader.start_filetable, SessionLoader.start_jointable):
+         Handlers for the new elements in the new fileformat
+         (SessionLoader.start_layer): Handle the shapestore attribute in
+         addition to filename.
+         (SessionLoader.start_table, SessionLoader.end_table): Removed.
+         They were never used in the old formats and aren't needed for the
+         new.
+         * Thuban/Model/session.py (Session.DataContainers): New method to
+         return all "data containers", i.e. shapestores and tables
+         * test/xmlsupport.py (SaxEventLister.__init__)
+         (SaxEventLister.startElementNS, sax_eventlist): Add support to
+         normalize IDs.
+         * test/test_xmlsupport.py
+         (TestEventList.test_even_list_id_normalization): New test case for
+         id normalization
+         * test/test_load.py (LoadSessionTest.check_format): Use ID
+         normalization
+         (LoadSessionTest.thubanids, LoadSessionTest.thubanidrefs): New
+         class atrributes used for ID normalization
+         (TestSingleLayer, TestLayerVisibility, TestLabels.test)
+         (TestLayerProjection.test, TestRasterLayer.test): Adapt to new
+         file format
+         (TestJoinedTable): New test for loading sessions with joined
+         tables.
+         (TestLoadError): New. Test whether missing required attributes
+         cause a LoadError.
+         * test/test_save.py (SaveSessionTest.thubanids)
+         (SaveSessionTest.thubanidrefs): New class attributes for ID
+         normalization in .thuban files.
+         (SaveSessionTest.compare_xml): Use id-normalization.
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Adapt to new file format.
+         (SaveSessionTest.testLayerProjection): The filename used was the
+         same as for testSingleLayer. Use a different one.
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): New test cases for saving the
+         new data sources structures.
+         (TestStoreSort, MockDataStore): Classes to test the sorting of the
+         data stores for writing.
+         * test/runtests.py: Add CVS keywords
+-06-20  Jonathan Coles   <[email protected]>
+         * test/test_session.py
+         (UnreferencedTablesTests.test_unreferenced_tables_with_joins):
+         Use the cultural_landmark-point.dbf file for the store so that
+         the table rows and shape count match.
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.__init__): Raise
+         an exception if the number of shapes is different from the
+         number of rows in the table. Address RTbug #1933.
+         * test/test_layer.py (TestLayer.test_derived_store): Add
+         a test for the new exception in DerivedShapeStore.__init__.
+         * test/support.py (FloatTestCase): Removed since there is
+         already FloatComparisonMixin. Fixes RTbug #1954.
+         (FloatComparisonMixin.assertFloatEqual): Include test for
+         infinity that was part of FloatTestCase.
+         * test/test_range.py (RangeTest): Inherit from
+         support.FloatComparisonMixin now that we don't have
+         support.FloatTestCase.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_save.py (SaxEventLister, sax_eventlist): Removed. Use
+         the implementation in xmlsupport instead.
+         (SaveSessionTest.compare_xml): sax_eventlist is now in xmlsupport
+         * test/test_proj.py: Import sax_eventlist from xmlsupport instead
+         of test_save
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (LoadSessionTest.check_format): New helper
+         method to make sure the test files we load might have been written
+         by the current thuban version.
+         (ClassificationTest.TestLayers, TestSingleLayer.test)
+         (TestLayerVisibility.test, TestClassification.test)
+         (TestLabels.test, TestLayerProjection.test, TestRasterLayer.test):
+         Add check_format() calls and fix the thuban data to match the data
+         that would be written by saving the session loaded from it.
+         * test/xmlsupport.py (SaxEventLister, sax_eventlist): Copies of
+         the same class and function in test_save.
+         * test/test_xmlsupport.py (TestEventList): New. test cases for
+         sax_eventlist
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban.dtd: Add comment about which versions of
+         Thuban are covered by this DTD
+         (map): Fix content model for layers and raster layers. There can
+         be any number or layers and raster layers in any order.
+-06-20  Jonathan Coles   <[email protected]>
+         This is mainly about fixing RTbug #1949.
+         * Thuban/Model/classification.py: Remove "from __future__"
+         import statement since python 2.2 is the earliest supported
+         version.
+         * Thuban/Model/proj.py (Projection.GetProjectedUnits): New.
+         Currently returns PROJ_UNITS_METERS or PROJ_UNITS_DEGREES
+         depending on the units this projection *forwards* into.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Remove unnecessary use of lambdas and nested functions.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Do scale
+         adjustment here if the map projection uses degrees.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Remove
+         scale adjust code since it is now done before calling
+         this method. Don't do anything if the map projection
+         is None.
+-06-19  Bernhard Herzog  <[email protected]>
+         Move version specific load tests to their own file.
+         * test/test_load.py: Expand the doc-string to explain a bit how to
+         handle file format changes.
+         (TestClassification.test): Update the docstring as this test is
+         not about Thuban 0.2 anymore.
+         * test/test_load_0_2.py: New file with the load tests for thuban
+         files created with Thuban 0.2 and earlier.
+-06-19  Bernhard Herzog  <[email protected]>
+         Add XML validation to some of the tests. Validation will only be
+         done if pyRXP is installed (http://reportlab.com/xml/pyrxp.html).
+         To make the DTD available to the test cases it's moved into
+         Resources/XML
+         * Resources/XML/thuban.dtd: New. This is now the real Thuban DTD
+         for versions up to and including 0.2. Two slight changes: added an
+         encoding specification and fixed the comment which refered to
+         GRASS, not Thuban
+         * test/xmlsupport.py: New support module for tests involving XML.
+         Currently there's a mix-in class for XML validation.
+         * test/test_xmlsupport.py: New. Tests for the xmlsupport module
+         * test/test_save.py (SaveSessionTest): Derive from ValidationTest
+         so that we can validate the
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Validate the generated XML
+         * test/runtests.py (main): Call print_additional_summary instead
+         of print_garbage_information
+         * test/support.py (resource_dir): New function to return the
+         "Resource" subdirectory
+         (print_additional_summary): New function to combine several
+         summary functions
+         (run_tests): Use print_additional_summary instead of calling
+         print_garbage_information directly
+-06-19  Bernhard Herzog  <[email protected]>
+         * Doc/thuban.dtd (classification): Correct the content model of
+         the classification element.
+         (projection): Add the "name" attribute
+-06-19  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Apply conversion to
+         scale if projection is latlong to get better estimate.
+         Fix problem of hidden properties dialog under windows after double
+         click on layer tree:
+         The tree control always gets an Expanded / Collapsed event after
+         the ItemActivated  on double click, which raises the main window again.         We add a second ItemActivated event to the queue, which simply
+         raises the already displayed window.
+         * Thuban/UI/legend.py (LegendTree.__init__): Instance variable
+         raiseProperties initialized to prevent endless loops
+         (LegendTree._OnItemActivated): Depending on self.raiseProperties
+         simply raise the properties or open the dialog and issue a second
+         event.
+-06-18  Jonathan Coles   <[email protected]>
+         * setup.py: Fix a few problems that occured under Windows.
+-06-18  Jonathan Coles   <[email protected]>
+         When Thuban loaded the map was redrawn twice because the
+         legend was being opened after the mainwindow was created
+         and not during its creation. This meant the map was drawn
+         initially and then had to be redrawn when the legend
+         caused the display to change. Now the legend is opened
+         in the mainwindow constructor which resolves this issue.
+         Also, although we were checking for the existence of
+         gdal and gdalwarp modules, the gdalwarp extension was
+         still being compiled (which may fail if the system doesn't
+         have gdal installed). the build_ext command to setup.py
+         now accepts the flags --with-gdal and --without-gdal.
+         If --without-gdal is specified setup.py will try to
+         use the gdal parameters specified by gdal-config. Under
+         windows, those parameters have to be set in setup.py
+         as with proj4 an wxWindows.
+         * setup.py: Use a list instead of seperate variables for
+         extension parameters so we can create a generic function
+         that runs an appropriate *-config script.
+         (run_cs_script): Renamed from run_wx_script and modified
+         to accept a second argument which is a list of lists to
+         be filled in by the values returned from running the command.
+         (thuban_build_ext): New. Extends the build_ext command and
+         provides the options --with-gdal/--without-gdal which then
+         optionally includes the gdalwarp extension.
+         * Thuban/Model/resource.py: First check if we can import
+         the gdalwarp Thuban extension before checking for gdal.
+         Also added some comments.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Check if
+         the map is None which may be the case if none has been loaded
+         yet.
+         * Thuban/UI/main.py (main): Remove call to ShowLegend.
+         * Thuban/UI/mainwindow.py (MainWindow.__init__): Call ShowLegend().
+         * Thuban/UI/renderer.py: Check for gdal support before importing
+         gdalwarp.
+         (MapRenderer.render_map): Only try to optimize if we have gdal
+         support otherwise nothing will get drawn.
+         * Thuban/UI/view.py (MapCanvas.FitMapToWindow): This may be called
+         during startup before a map has been created. Check if map is None
+         before using it and do nothing if it is.
+-06-17  Jonathan Coles   <[email protected]>
+         Fix the problem with raster layers under Windows that caused
+         Thuban to crash. The view should respond to layer projection
+         changed events to update the display. Changes to a projection
+         should not cause the map to be set to full extent.
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         current_map_proj to remember the current map projection so that
+         when the projection changes we know what the previous projection
+         was.
+         (MapCanvas.SetMap): Unsubscribe and subscribe to
+         LAYER_PROJECTION_CHANGED events.
+         (MapCanvas.projection_changed): Split into two methods that respond
+         to map and layer projection changes.
+         (MapCanvas.map_projection_changed): New. Takes the current view and
+         projects it using the new projection. This does not cause the
+         map to be redrawn at full extent.
+         (MapCanvas.layer_projection_changed): New. Cause a redraw which
+         will draw each layer in its new projection.
+         * extensions/thuban/bmpdataset.cpp (BMPDataset::Open): Call
+         VSIFClose() not VSIFCloseL() to close the file. Fixes a crash
+         under Windows.
+         * extensions/thuban/gdalwarp.cpp (MFILENAME): Padding should be
+         to twice sizeof(void*) because there are two digits for each
+         hex byte.
+-06-16  Bernhard Herzog  <[email protected]>
+         Update to the layer interface: Direct access to the table,
+         shapetable, shapefile and filename attributes is now actively
+         deprecated by issuing deprecation warnings for all places where
+         this happens.
+         * Thuban/Model/layer.py (Layer.__getattr__): New. Implement access
+         to the instance variables table, shapetable, shapefile and
+         filename via __getattr__ so that we can issue a deprecation
+         warning.
+         (Layer.SetShapeStore): Don't set the deprecated instance variables
+         any more
+         (Layer.SetShapeStore): Don't use deprecated layer instance
+         variables
+         (Layer.Destroy): No need to explicitly remove the instance
+         variables any more
+         (Layer.GetFieldType, Layer.Shape): Don't use deprecated layer
+         instance variables
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__)
+         (GenUniformPanel._OnRetrieve, GenUniquePanel._OnRetrieve)
+         (GenQuantilesPanel.GetList, GenQuantilesPanel.OnRetrieve): Don't
+         use deprecated layer instance variables
+         * Thuban/UI/classifier.py (Classifier.__init__): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/identifyview.py (IdentifyListCtrl.selected_shape)
+         (IdentifyGridCtrl.selected_shape): Don't set the deprecated layer
+         instance variables
+         * Thuban/UI/tableview.py (LayerTableGrid.select_shapes): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Don't use
+         deprecated layer instance variables
+         * Thuban/Model/save.py (SessionSaver.write_layer): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer)
+         (MapRenderer.polygon_render_param): Don't use deprecated layer instance
+         variables
+         * test/runtests.py (main): Turn Thuban's deprecation warnings into
+         errors so that they're cought by the tests
+         * test/test_load.py (TestSingleLayer.test): Don't use deprecated
+         layer instance variables
+-06-16  Jonathan Coles   <[email protected]>
+         Fix a problem under Windows whereby if the user double-clicks on a
+         layer in the legend that tree item will expand or collapse as well
+         as open the layer properties dialog. The state of the tree item
+         should not be affected.
+         * Thuban/UI/legend.py (LegendTree.__init__): Add instance variable
+         preventExpandCollapse and subscribe to expanding and collapsing
+         events.
+         (LegendTree.OnItemExpandCollapse): New. Responds to expanding and
+         collapsing events and will veto the event if it has been triggered
+         by the user double clicking on a layer.
+         (LegendTree._OnItemActivated): Set preventExpandCollapse to indicate
+         that an expanding/collapsing event should be vetoed.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.OnClose)
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): Unsubscribe the messages
+         in OnClose and not in map_layers_removed or
+         layer_shapestore_replaced to make sure it always happens when the
+         dialog is closed
+-06-13  Jonathan Coles   <[email protected]>
+         This puts back a fix for Windows where a panel is needed so that
+         the background of the table view appears correctly.
+         * Thuban/UI/tableview.py (TableFrame.__init__): Add a panel
+         object that can be used by derived classes to place any
+         controls (including the grid) onto.
+         (QueryTableFrame.__init__): Use the panel as the parent window
+         for all the controls. Reparent the grid so that the panel is
+         the parent. Call UpdateStatusText() to correctly initialize
+         the status bar.
+-06-13  Jonathan Coles   <[email protected]>
+         * Thuban/UI/dialogs.py (ThubanFrame): New: a class that inherits
+         from wxFrame (as opposed to wxDialog like the other classes)
+         but otherwise behaves like the other classes. This is needed
+         for the TableView which isn't really a dialog and needs to
+         have a status bar and control buttons.
+         * Thuban/UI/tableview.py (TableGrid.__init__): Create an
+         instance variable to keep track of how many rows are selected.
+         Subscribe once to the the events we are interested in.
+         (ThubanGrid.OnRangeSelect): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.OnSelectCell): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.ToggleEventListeners): Rather than subscribe None
+         as an event listener (which changes the event handler stack)
+         simply set an instance variable to False. This is checked in
+         the event handlers.
+         (ThubanGrid.GetNumberSelected): Return the number of currently
+         selected rows.
+         (TableFrame): Inherit from ThubanFrame so we can have a
+         status bar and control buttons.
+         (QueryTableFrame.__init__): Create a status bar. Fixes RTbug #1942.
+         Explicitly set which items are selected in the operator choice and
+         action choice so there is always a valid selection. Fixes RTbug #1941.
+         Subscribe to grid cell selection events so we can update the
+         status bar.
+         (QueryTableFrame.UpdateStatusText): Update the status bar with
+         how many rows are in the grid, how many columns, and how many
+         rows are selected.
+         (QueryTableFrame.OnGridSelectRange, QueryTableFrame.OnGridSelectCell):
+         Call UpdateStatusText when cells are (de)selected.
+         (QueryTableFrame.OnQuery): Use the string value in the value
+         combo if either the selected item index is 0 or if the string
+         cannot be found in the predefined list (this happens if the
+         user changes the text). Fixes RTbug #1940.
+         Only turn off the grid event listeners if there a query comes
+         back with a none empty list of ids. in the case that the list
+         is empty this causes a grid.ClearSelection() call to actually
+         clear the grid selection which causes the selected items in
+         the map to be deselected. Fixes RTbug #1939.
+         * test/test_save.py (XMLWriterTest.Encode): Check return values.
+         Fixes RTbug #1851.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__): Call
+         self.selected_shape with the current selection to make sure the
+         contents of the dialog are up to date when it's shown for the
+         first time.
+         The dialog used to work without this by luck. The recent fix to
+         the connector module 'broke' a 'feature' the identify view was
+         relying on, i.e that subscribing to a message in response to
+         receiving a message of that type would mean that the new
+         subscriber would also be called for the same message.
+-06-12  Jonathan Coles   <[email protected]>
+         * extensions/thuban/gdalwarp.cpp: Removed debug printing as
+         the image is rendered. Fixes RTbug #1937.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Lib/fileutil.py: As is done under Windows, create the
+         user directory if it doesn't exist on a posix system.
+         Fixes RTbug #1815.
+         * Thuban/Model/resource.py (get_user_proj_files): Moved the
+         called to get_application_dir here, so that the directory
+         will only be called if this method is invoked.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Clear
+         the projfilepath if no projection is selected.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Don't draw
+         the scalebar if the current map has no projection set.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Set the
+         projfilepath label to just the basename of the projection file
+         rather than include the entire path.
+         * Thuban/Model/resource.py: Fix missed proj functions that
+         needed to be renamed.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classification.py: Removed assert statements that
+         tested if the variable was an instance of Color.
+         * Thuban/Model/color.py (Color): Remove commented code that isn't
+         used.
+         (Transparent): Renamed from NoColor. Doesn't inherit from Color.
+         Fixes RTbug #1835.
+         (Transparent.__eq__, Transparent.__ne, Transparent.__repr): New.
+         Needed now that the class doesn't inherit from Color.
+-06-12  Jonathan Coles   <[email protected]>
+         * test/test_save.py (XMLWriterTest.testEncode): Explicitly
+         check unicode strings.
+         * test/test_layer.py: Check for existence of gdal.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/xmlreader.py: New. Contains the XMLReader class
+         that was in load.py
+         * Thuban/Model/xmlwriter.py: New. Contains the XMLWriter class
+         that was in save.py
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+         * Thuban/Model/save.py (escape, XMLWriter): Moved into seperate
+         file xmlwriter.py.
+         * Thuban/Model/resource.py: Renamed functions to following the
+         function_names_with_underscores style.
+         (has_gdal_support): New function that returns true if the gdal
+         library is available. Addresses RTbug #1877.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession):
+         Display a message box if the gdal library is not available, but
+         only if there are any layers that would use it. Addresses RTbug #1877.
+         * Thuban/UI/classgen.py: Use renamed projection resource functions.
+         (GenUniformPanel.__CalcStepping): Fix a slight discrepency
+         when using integers versus floats.
+         * Thuban/UI/mainwindow.py (_has_gdal_support): New. Used to
+         determine if the "Add Image Layer" menu option should be
+         greyed out or not. Addresses RTbug #1877.
+         * Thuban/UI/projdialog.py: Use renamed projection resource functions.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Only try to
+         optimize if a raster layer is visible. Fixes RTbug #1931.
+         Only draw the raster layer if the gdal library is available.
+         Addresses RTbug #1877.
+         * test/test_classgen.py: Add tests for generate_singletons,
+         generate_uniform_distribution, generate_quantiles. Fixes RTbug #1903.
+         (test_calculate_quantiles): Fix some tests to catch the new
+         ValueError that is raised.
+         * test/test_proj.py: Use renamed projection resource functions.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): New
+         test for saving classified layers. Fixes RTbug #1902.
+         (XMLWriterTest): New. Tests the XMLWriter class. Fixes RTbug #1851.
+-06-12  Jan-Oliver Wagner <[email protected]>
+         Fix for http://intevation.de/rt/webrt?serial_num=1900.
+         * Thuban/UI/multiplechoicedialog.py: New. A multiple choice dialog.
+         * Thuban/UI/mainwindow.py: import wxMultipleChoiceDialog from
+         multiplechoicedialog.py rather than from the wxPython library.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): Minor stability
+         update.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): New function to
+         determine the absolute .thuban/thuban directory under
+         "posix" (os.expanduser) and "nt" (read AppData registry key).
+         * Thuban/Model/resource.py: Use get_application_dir
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Use get_application_dir.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Subscribe to
+         the messages MAP_LAYERS_REMOVED messages
+         (LayerTableFrame.OnClose): Unsubscribe from it.
+         (LayerTableFrame.map_layers_removed): New. Receiver for
+         MAP_LAYERS_REMOVED. Close the dialog when the layer whose the
+         dialog is showing is removed.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (Connector.Issue): Iterate over a copy
+         of the receivers list so that unsubscribing in a receiver doesn't
+         modify it while iterating over it.
+         * test/test_connector.py
+         (ConnectorTest.test_disconnect_in_receiver): New. Test whether
+         unsubscribing in a receiver works correctly. See docstring for
+         details
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (LAYER_SHAPESTORE_REPLACED): New
+         message.
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Send
+         LAYER_SHAPESTORE_REPLACED when the shapestore changes. A
+         LAYER_CHANGED will still be sent if the classification changes.
+         * Thuban/UI/classifier.py (Classifier.__init__): Add the map as
+         parameter so we can subscribe to some of its messages
+         (Classifier.__init__): Subscribe to the map's MAP_LAYERS_REMOVED
+         and the layer's LAYER_SHAPESTORE_REPLACED
+         (Classifier.unsubscribe_messages): New. Unsubscribe from message
+         subscribed to in __init__
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): receivers for the messages
+         subscribed to in __init__. Unsubscribe and close the dialog
+         * Thuban/UI/mainwindow.py (MainWindow.OpenLayerProperties): Pass
+         the map to the Classifier dialog
+         * test/test_layer.py (SetShapeStoreTests): Derive from
+         SubscriberMixin as well so we can test messages
+         (SetShapeStoreTests.setUp): Subscribe to some of the layer's
+         messages
+         (SetShapeStoreTests.tearDown): Clear the messages again
+         (SetShapeStoreTests.test_sanity): Expand the doc-string and check
+         for the modified flag too
+         (SetShapeStoreTests.test_set_shape_store_modified_flag): New test
+         to check whether SetShapeStore sets the modified flag
+         (SetShapeStoreTests.test_set_shape_store_different_field_name)
+         (SetShapeStoreTests.test_set_shape_store_same_field)
+         (SetShapeStoreTests.test_set_shape_store_same_field_different_type):
+         Add tests for the messages. This checks both the new
+         LAYER_SHAPESTORE_REPLACED and the older LAYER_CHANGED
+-06-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py: Improved and partly added help texts for
+         the menu items.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Layout reimplemented without panel. Make life easier to fit the list
+         in the dialog.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Fill the projchoice
+         once on initialisation (Former implementation resulted in multiple
+         entries for each projection).
+         (ProjFrame.__FillAvailList): selectProj as second optional parameter,
+         if set, select the projection found under the specified name. This
+         overwrites any other selection estimate.
+         Removed projchoice filling from this method.
+         (ProjFrame._OnSave, ProjFrame._OnAddToList):
+         Updated call of ProjFrame.__FillAvailList
+         (LCCPanel._DoLayout): Moved parameter controls in more common order.
+         * Resources/Projections/defaults.proj: Extended defaults representing
+         various common European projections.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Use ListCtrl instead of GridCtrl
+         * Thuban/Model/resource.py:
+         Guess location of .thuban directory from tempdir parent directory.
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Guess location of .thuban directory from tempdir parent directory.
+-06-04  Bernhard Herzog  <[email protected]>
+         Do not cache the values returned by the tree widget's
+         GetFirstChild and GetNextChild methods because it led to lots of
+         segfaults. The new way requires more brute force but is more
+         reliable.
+         * Thuban/UI/legend.py (LegendTree.__init__): Remove instance
+         variable layer2id
+         (LegendTree.find_layer): New method to do with brute force what
+         layer2id tried to accomplish
+         (LegendTree._OnMsgLayerChanged)
+         (LegendTree._OnMsgLayerTitleChanged, LegendTree.__ShowHideLayer):
+         Use find_layer instead of layer2id
+         (LegendTree.__RemoveLayer, LegendTree.__AddLayer): No need to
+         update layer2id anymore
+         (LegendTree._OnMsgMapLayersRemoved)
+         (LegendTree._OnMsgMapLayersAdded): Get by without layer2id.
+-06-03  Thomas Koester  <[email protected]>
+         * Thuban/Model/classgen.py (GenQuantiles0): New function.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (layer_rename command, table_rename command):
+         New commands.
+         (main_menu): Add the new commands.
+         (MainWindow.TableRename): New. Implementation of the table_rename
+         command.
+         (MainWindow.RenameLayer): New. Implementation of the layer_rename
+         command.
+         * Thuban/Model/session.py (Session.AddTable): call self.changed to
+         set the modified flag
+         * test/test_session.py (TestSessionSimple.test_add_table): Test
+         whether the modified flag is set properly
+         * Thuban/Model/base.py (TitledObject.SetTitle): Call changed
+         instead of issue so that the modified flags get updated.
+         * test/test_base.py (SomeTitledObject): Derive from Modifiable
+         instead of Publisher to reflect reality better and to accomodate
+         the fact that SetTitle now calls changed instead of issue
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.GetList): Resource
+         acquisition has to happen before the try in a try-finally.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree._OnMsgMapLayersRemoved): It's
+         possible that a layer is removed that is not currently selected in
+         the legend so don't check for this.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.Destroy): Set all instance
+         variables to None that have direct or indirect references to
+         shapefiles or dbf files to make sure that they do go away and the
+         files are closed.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.GetRootItem): Reset
+         availImgListIndices when a new image list is created
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.__init__): New instance variable
+         changing_selection to indicate whether the LegendTree code itself
+         is currently changing the selection
+         (LegendTree.normalize_selection): New method to normalize the
+         selection by selecting the layer item even if the user clicked on
+         the classification.
+         (LegendTree._OnSelChanged): normalize the selection. This works
+         around a bug in wx which doesn't keep track of the selection
+         properly when subtrees are deleted.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.set_view_transform): Limit the
+         maximum and minimum scale factors.
+         * test/test_classgen.py (ClassGenTest.test): Update to reflect the
+         changes in classgen.py
+-05-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Remove ClassGenerator class but make
+         all the methods functions. Fixes RTBug #1903.
+         * Thuban/Model/map.py (Map.TopLayer, Map.BottomLayer): Renamed
+         to MoveLayerToTop and MoveLayerToBottom respectively. Fixes
+         RTBug #1907.
+         * Thuban/UI/classgen.py: Use classgen functions that were part
+         of the ClassGenerator class. Put try/finally blocks around
+         code that uses wxBeginBusyCursor()/wxEndBusyCursor(). Fixes
+         RTBug #1904.
+         * Thuban/UI/classifier.py: Remove unused import of ClassGenerator.
+         * Thuban/UI/legend.py: The legend was cleared and repopulated any
+         time something changed which caused some state to be lost such
+         as which children were expanded or collapsed. Fixes RTBug #1901.
+         (LegendTree._OnMsgMapLayersAdded): Add only new layers.
+         (LegendTree.__OnMsgMapLayersRemoved): Remove layers that exist in
+         the legend but not in the map.
+         (LegendTree.__FillTree): Move main functionality out into smaller
+         methods that can be used by other methods.
+         (LegendTree.__FillTreeLayer): Reuse old slots in the image list
+         if they are available.
+         (LegendTree.DeleteAllItems): Renamed from __DeleteAllItems so
+         that we override the wxTreeCtrl method. Iterate over children
+         and call __RemoveLayer.
+         (LegendTree.__AddLayer): New. Add a new layer to the legend.
+         (LegendTree.__RemoveLayer): Remove a layer from the legend.
+         (LegendTree.DeleteChildren): New, overrides wxTreeCtrl method.
+         Should only be called with the id of a layer branch.
+         (LegendTree.GetRootItem): New, overrides wxTreeCtrl method.
+         Returns the root item or creates one if necessary.
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_layer): Call
+         ProjectRasterFile with tuple arguments instead of strings.
+         * Thuban/UI/tableview.py (QueryTableFrame.OnQuery): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         (MapCanvas.FitSelectedToWindow): If a single point is selected
+         simply center it on the display. Fixes RTBug #1849.
+         * extensions/thuban/gdalwarp.cpp: Removed code that allowed gdalwarp
+         to be compiled as a standalone app. Now the code can only be
+         called from Python which simplifies the parameter passing.
+         (ProjectRasterFile): Handle Python arguments. Remove code that
+         checks for a destination dataset. Add more clean up code.
+         * test/test_map.py (TestMapWithContents.test_raise_layer_top,
+         TestMapWithContents.test_lower_layer_bottom):
+         Test Map.MoveLayerToTop() and Map.MoveLayerToBottom() respectively.
+         Fixes RTBug #1907.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Apply a full
+         extent to the map when the legend is toggled. Fixes RTBug #1881.
+-05-29  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.OnClose): Bug-fix: Now
+         unsubscribes all that is subcribed in __init__.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.DuplicateLayer)
+         (MainWindow.CanDuplicateLayer): New methods to implement the
+         Layer/Duplicate command.
+         (layer_duplicate command): New.
+         (main_menu): Add layer_duplicate to the Layer menu.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (NullRenderer.Draw): New. Our own
+         renderer so that NULL/None values get displayed differently (by a
+         gray rectangle).
+         (TableGrid.__init__): Override the default renderers
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Set the
+         classification to "None" if the type of the field has changed.
+         * test/test_layer.py (SetShapeStoreTests): New. Class with a few
+         test for the Layer.SetShapeStore method
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/layer.py (Layer.TreeInfo): Fixed a bug (a layer
+         does not necessarily have a filename).
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableClose, MainWindow.TableShow):
+         sort the selection list for the dialog.
+-05-28  Frank Koormann  <[email protected]>
+         * extensions/thuban/wxproj.cpp
+         (project_point): Removed cast to int for projected point coordinates.
+         (shape_centroid): Return last point if all polygon vertices fall
+         to one point.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (_can_unjoin): Add doc-string and cope
+         with layers that don't have shapestores, i.e. raster layers.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (DBFTable.__init__): Omit the extension
+         when determining the title from the filename.
+         * test/test_dbf_table.py (TestDBFTable.test_title): Update to
+         reflect changes in the way the title is derived from the filename
+-05-28  Frank Koormann  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow):
+         Added wxDEFAULT_DIALOG_STYLE to show table dialog styles.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages): Also
+         delegate SelectedLayer.
+         (MainWindow.LayerUnjoinTable): Implement.
+         (_can_unjoin): New. Helper function for the sensitivity of the
+         layer/unjoin command.
+         * Thuban/Model/data.py (ShapefileStore.OrigShapeStore)
+         (DerivedShapeStore.OrigShapeStore): New. Return the original
+         shapestore. Used to figure out how to unjoin.
+         (DerivedShapeStore.Shapefile): Fix a typo.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog): Extend to handle layer joins as
+         well
+         (JoinDialog.__init__): Use the layer parameter and only build the
+         left choice when a layer is given
+         (JoinDialog.OnJoin): Handle layer joins as well
+         (JoinDialog.OnLeftTable, JoinDialog.OnRightTable): Handle the case
+         that the user selects the "Select..." item. The sensitivitly
+         updating is now in update_sensitivity
+         (JoinDialog.y): New method to refactor the sensitivity update of
+         the join button into its own method.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerJoinTable): Implement.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (table_close command): Make it sensitive
+         iff there are unreferenced tables in the session
 -05-27  Bernhard Herzog  <[email protected]>
          * Thuban/Model/messages.py (TABLE_REMOVED): New message.

 Legend:



Removed from v.1069
 


changed lines


 
Added in v.1582
 Legend:



Removed from v.1069
 


changed lines


 
Added in v.1582
-Removed from v.1069
+Added in v.1582

[email protected]	ViewVC Help
Powered by ViewVC 1.1.26