/[thuban]/branches/WIP-pyshapelib-bramz/ChangeLog

Diff of /branches/WIP-pyshapelib-bramz/ChangeLog

Parent Directory | Revision Log | View Patch Patch

-revision 924 by frank,
Mon May 19 09:12:42 2003 UTC
+revision 2003 by bh,
Mon Dec  1 19:45:17 2003 UTC
 Line 1
+-12-01  Bernhard Herzog  <[email protected]>
+         * setup.py (proj4_prefix, wx_prefix, gdal_prefix): Fix these for
+         nt to better match Intevation's current w32 setup
+         * HOWTO-Release: Add note about updating MANIFEST.in
+         * MANIFEST.in: Add the Extensions
+         * NEWS: Update for 1.0rc1
+-12-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Change the wild
+         cards for the dialog so that shapefiles ending in all uppercase
+         SHP are listed too
+-11-28  Bernhard Herzog  <[email protected]>
+         * Thuban/version.py (longversion): Update to 1.0rc1
+         * setup.py (setup call): Update version to 1.0rc1. Use the
+         [email protected] email address as author email instead of my
+         personal one.
+-11-28  Bernhard Herzog  <[email protected]>
+         * po/de.po: Update german translation.
+-11-28  Bernhard Herzog  <[email protected]>
+         Unify the filenames stored in .thuban files so that the .thuban
+         files are more platform independend
+         * Thuban/Model/save.py (unify_filename): New. Unify filenames so
+         that they can be used on both windows and unix
+         (SessionSaver.prepare_filename): New. Handle all filename
+         transformations for filenames stored in the thuban file
+         (SessionSaver.write_data_containers, SessionSaver.write_layer):
+         Use prepare_filename
+         * test/test_save.py (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Filenames are always stored
+         with slashes on all currently supported platforms so adapt all
+         tests to this
+         * test/test_load.py (LoadSessionTest.filenames): With the new
+         filename scheme the filenames in the tests should be
+         understandable on all currently supported platforms so we turn
+         this into an empty list because we don't have to normalize them
+         anymore
+-11-28  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.test_arc_layer_with_projection):
+         Add the ellipsoid to the projection since some Proj versions
+         complain if it's missing.
+-11-27  Bernhard Herzog  <[email protected]>
+         Corect some bounding box projection problems
+         * Thuban/Model/proj.py (Projection.InverseBBox): New. Inverse
+         version of ForwardBBox
+         (Projection._transform_bbox): New. common implementation of
+         ForwardBBox and InverseBBox
+         (Projection.ForwardBBox): Use _transform_bbox.
+         * test/test_proj.py (TestProjection.test): Add test for
+         InverseBBox
+         * Thuban/Model/layer.py (Layer.LatLongBoundingBox)
+         (Layer.ShapesBoundingBox, RasterLayer.LatLongBoundingBox): Use the
+         new InverseBBox method to determine the unprojected bounding box
+         (Layer.ShapesInRegion): Use the ForwardBBox method to project the
+         bbox.
+         * test/test_layer.py (TestLayer.test_point_layer_with_projection):
+         Removed.
+         (TestLayer.test_arc_layer_with_projection): New. This test is
+         better able to test whether bounding boxes are projected correctly
+         than test_point_layer_with_projection
+         * Thuban/UI/viewport.py (ViewPort.map_projection_changed): Use
+         InverseBBox to unproject bboxes
+-11-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Make sure we have ASCII
+         source code.
+-11-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.__getattr__): Removed. It was only
+         there for backwards compatibility and all code relying on that
+         should have been updated by now.
+-11-25  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (TestClassification.test): Add the missing
+         round trip test.
+         (TestClassification.file_contents): Update to the newest file
+         format
+-11-25  Bernhard Herzog  <[email protected]>
+         Add very experimental (and possibly dangerous) extension to draw
+         polygons:
+         * Extensions/drawshape/README: New. Brief installation
+         instructions
+         * Extensions/drawshape/drawshape.py: New. Implementation of the
+         drawshape extensions
+         * Extensions/drawshape/patch.diff: Patch to apply before the
+         extension can be used.
+-11-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (ShapefileStore._open_shapefile)
+         (ShapefileStore.__init__): Factor opening the shapefile into a
+         separate method (the new _open_shapefile). This makes the code a
+         bit more readable but the real reason is that it makes some evil
+         hacks easier. :-)
+-11-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.check_attrs): If no
+         converter is specified for an attribute assume it's a string
+         containing only Latin1 characters. Update doc-string accordingly.
+         This change should fix many places where unicode objects might
+         accidentally enter Thuban.
+         * test/test_load.py (TestNonAsciiColumnName): New test to check
+         what happens with column names in DBF files that contain non-ascii
+         characters
+-11-21  Bernhard Herzog  <[email protected]>
+         Enable the experimental attribute editing again and introduce a
+         command line switch to actually activate it
+         * Thuban/UI/main.py (options): New. Container for options set on
+         the commmand line
+         (main): Add the --enable-attribute-editing flag.
+         * Thuban/UI/identifyview.py (IdentifyView.__init__): If attribute
+         editing is enabled use the grid ctrl which allows editing of the
+         values
+         * Thuban/Model/transientdb.py (AutoTransientTable.write_record):
+         New. Just delegate this to the underlying table.
+-11-20  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (ProjFileReadTests.test_read_unreadable_file):
+         Skip this test if run under non-posix systems since it only works
+         there
+-11-19  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py: Rework the way gdal support is
+         determined so that we can give a reason in the about why gdal is
+         not supported.
+         (gdal_support_status): New. Variable holding a string with the
+         reason for no gdal support
+         * Thuban/UI/about.py (About.__init__): Add the reason why gdal is
+         not supported to the message
+-11-19  Bernhard Herzog  <[email protected]>
+         Remove the old table interface and its test cases
+         * Thuban/Model/table.py (OldTableInterfaceMixin): Removed.
+         (DBFTable, MemoryTable): Do not derive from OldTableInterfaceMixin
+         anymore
+         * Thuban/Model/transientdb.py (TransientTableBase)
+         (AutoTransientTable): Do not derive from OldTableInterfaceMixin
+         anymore
+         * test/test_table.py: Removed since the old interface it tests is
+         gone.
+         * test/runtests.py (main): The old table interface is gone and
+         with it the deprecation warnings so remove the code that turns
+         these warnings into errors
+-11-19  Bernhard Herzog  <[email protected]>
+         * test/test_table.py: Revert to revision 1.5 again. Changing the
+         tests to use the new table interface is completely wrong since the
+         whole purpose of the tests in this module is to test the old
+         interface.
+-11-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISConnection.MatchesParameters):
+         New. Test whether the connection matches a set of connection
+         parameters
+         * Thuban/UI/dbdialog.py (DBFrame.conns_changed): Fix doc-string
+         (DBFrame.OnAdd): Use the new MatchesParameters method when looking
+         for existing connections with the same parameters and break out of
+         the loop correctly.
+         * test/test_postgis_db.py (TestBriefDescription)
+         (TestPostGISSimple.test_brief_description): Rename
+         TestBriefDescription to TestPostGISSimple and the test method to
+         test_brief_description so that we can add more test methods.
+         (TestPostGISSimple.test_matches_parameters): New. Test the new
+         MatchesParameters method
+-11-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (Publisher): Introduce a new flag,
+         _was_destroyed, to indicate whether an publisher instance has
+         already been destroyed.
+         (Publisher.Unsubscribe): Only disconnect if the publisher has not
+         been destroyed yet.
+         (Publisher.Destroy): Set the _was_destroyed flag to true.
+         * test/test_connector.py
+         (TestPublisher.test_unsubscribe_after_destroy): New. Test that
+         calling Unsubscribe after Destroy doesn't raise an exception
+-11-14  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.selected_shape): Fix
+         typo in doc-string
+-11-13  Bernhard Herzog  <[email protected]>
+         Quote table and column names properly for postgis.
+         * Thuban/Model/postgisdb.py (quote_identifier): New. Function to
+         quote an identifier for use in an sql statement
+         (PostGISColumn.__init__): Add the quoted_name attribute
+         (PostGISTable.__init__): New instance variable quoted_tablename
+         (PostGISTable._fetch_table_information): Use the quoted table
+         name. New isntance variable quoted_geo_col with a quoted version
+         of geometry_column
+         (PostGISTable.NumRows, PostGISTable.RowIdToOrdinal)
+         (PostGISTable.RowOrdinalToId): Use the quoted table name
+         (PostGISTable.ReadValue, PostGISTable.ValueRange)
+         (PostGISTable.UniqueValues, PostGISTable.SimpleQuery)
+         (PostGISShapeStore.BoundingBox, PostGISShapeStore.Shape)
+         (PostGISShapeStore.AllShapes, PostGISShapeStore.ShapesInRegion):
+         Use quoted table and column names
+         * test/test_postgis_db.py (TestPostGISSpecialCases)
+         (TestPostGISIgnoredColumns): Rename the class to
+         TestPostGISSpecialCases because that better describes the new
+         cases
+         (TestPostGISSpecialCases.test_unsupported_types)
+         (TestPostGISSpecialCases.test): Rename the method to
+         test_unsupported_types because we need a more descriptive name now
+         that there are more methods
+         (TestPostGISSpecialCases.test_table_name_quoting)
+         (TestPostGISSpecialCases.test_column_name_quoting)
+         (TestPostGISSpecialCases.test_shapestore_name_quoting): New test
+         cases to test quoting of table and column names in PostGISTable
+         and PostGISShapeStore
+         * test/postgissupport.py
+         (skip_if_addgeometrycolumn_does_not_use_quote_ident): New. Skip if
+         AddGeometryColumn desn't support table or column names with sapces
+         or double quotes
+-11-12  Jan-Oliver Wagner <[email protected]>
+         * Extensions/wms/__init__.py: New: Init to make this
+         directory a package.
+         * Extensions/wms/wms.py: New: Provide layers via OGC WMS.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (EPSG_DEPRECATED_PROJ_FILE): New.
+         Constant for the file woth deprecated epsg projections
+         (get_system_proj_file): Update doc-string
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Add a space
+         above the EPS widgets, introduce a check box for the deprecated
+         eps projections and a label for the epsg widgets
+         (ProjFrame._OnShowEPSG): Handle the deprecated EPSG projections
+         too
+-11-11  Bernhard Herzog  <[email protected]>
+         Avoid warnings when run under Python 2.3
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_point_shape)
+         (BaseRenderer.draw_label_layer): Coordinates must be ints.
+         * Thuban/UI/renderer.py (MapRenderer.make_point): Turn this into a
+         real method so that we can convert to int.
+         (MapRenderer.label_font): The font size mist be an int.
+         * Thuban/UI/common.py (Color2wxColour): The color values must be
+         ints. Also, remove the unnecessary asserts.
+         * test/test_load_0_8.py (TestUnicodeStrings.file_contents)
+         (TestUnicodeStrings.test): Python source code should not contain
+         non-ascii characters unless an encoding is specified in the file.
+         Therefore use \x escapes in the string literals for non-ascii
+         characters.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (get_system_proj_file): Add a filename
+         parameter so that this function can be used for all proj files in
+         Resource/Projections
+         (DEFAULT_PROJ_FILE, EPSG_PROJ_FILE): New. Predefined filenames for
+         get_system_proj_file
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Instead of one
+         ProjFile self.__sysProjFile use a dictionary of system ProjFile
+         objects self._sys_proj_files
+         (ProjFrame.build_dialog): Adapt to the new changes in the
+         ProjectionList constructor. Add a check button to toggle whether
+         EPSG projections are shown
+         (ProjFrame._OnShowEPSG): New. Handler for the epsg check button
+         events.
+         (ProjFrame.load_user_proj, ProjFrame.load_system_proj): Only show
+         the busy cursor if the files have not yet been loaded by the
+         dialog.
+         (ProjFrame.load_system_proj): Add a parameter for the name of the
+         proj file. Maintain the dictionary of system projections
+         self._sys_proj_files
+         * Thuban/UI/projlist.py (ProjectionList): Merge the system_projs,
+         user_projs parameters into one parameter proj_files which is a
+         list of proj files.
+         (ProjectionList._subscribe_proj_files)
+         (ProjectionList._unsubscribe_proj_files): New. Move
+         subscription/unsubscription of projfile messages to separate
+         methods
+         (ProjectionList.Destroy): The unsubscribe is now done in
+         _unsubscribe_proj_files
+         (ProjectionList.update_projections): We now have a list of proj
+         file objects
+         (ProjectionList.SetProjFiles): New method to set a new list of
+         proj file objects
+         * test/test_proj.py (ProjFileReadTests.test_get_system_proj_file):
+         Specify explicitly which system proj file to load.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.Destroy): New. Clear all
+         instance variables to cut cyclic references. The GC would have
+         collected the loader eventually but it can happen that it doesn't
+         run at all until thuban is closed (2.3 but not 2.2 tries a bit
+         harder and forces a collection when the interpreter terminates)
+         (load_session): Call the handler's Destroy method to make sure
+         that it gets garbage collected early. Otherwise it will be
+         collected very late if at all and it holds some references to e.g.
+         shapestores and the session which can lead to leaks (of e.g. the
+         temporary files)
+         * test/test_load.py (TestSingleLayer.test_leak): New. test for the
+         resource leak in load_session
+-11-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py: Add a way to specify how layers in
+         extensions are to be rendered.
+         (_renderer_extensions): New. List with renderer for layers in
+         extensions
+         (add_renderer_extension): New. Add a renderer extension
+         (init_renderer_extensions): New. Init the renderer extensions
+         (BaseRenderer.render_map_incrementally): Search
+         _renderer_extensions for how to draw unknown layer types
+         (BaseRenderer.draw_raster_data): Add format parameter so that
+         formats other than BMP can be drawn
+         (BaseRenderer.draw_raster_layer): Pass an explicit format to
+         draw_raster_data
+         * Thuban/UI/renderer.py (raster_format_map): New. Mapping form the
+         strings of the format parameter of draw_raster_data method to wx
+         constants
+         (MapRenderer.draw_raster_data): Add the format parameter and use
+         raster_format_map to map it to the right wxwindows constant for
+         wxImageFromStream
+         * test/test_baserenderer.py (SimpleRenderer.draw_raster_data): Add
+         the format parameter and record it
+         (TestBaseRenderer.test_raster_no_projection): check the format
+         paramter of the draw_raster_data method
+         (TestBaseRenderer.test_renderer_extension): New. Test the renderer
+         extension facility
+-11-07  Bernhard Herzog  <[email protected]>
+         Tweak the usage of the sqlite database to make common use cases
+         more responsive. In most cases copying the data to the sqlite
+         database takes so long that using sqlite doesn't have enough
+         advantages.
+         * Thuban/Model/transientdb.py (TransientTableBase.ValueRange): Add
+         comments about performance and query the min and max in separate
+         statements because only that way will indexes be used.
+         (TransientTableBase.UniqueValues): Add some comments about
+         performance.
+         (AutoTransientTable.ValueRange, AutoTransientTable.UniqueValues):
+         Do not copy the data to the transient DB but use the transient
+         copy if it exists. See the new comments for the performance trade
+         offs
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table): Make sure that the
+         data is copied to the transient database at some point.
+-11-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (ShapefileStore.ShapesInRegion): Bind some
+         globals to locals so that it's a bit faster
+-11-03  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Use the ReadValue
+         method. ReadValue is faster than ReadRowAsDict since it only reads
+         one cell especially now that the dbf file objects actually
+         implement it.
+         * Thuban/Model/table.py (DBFTable.ReadValue): Use the new
+         read_attribute method of the dbf objects
+-11-03  Bernhard Herzog  <[email protected]>
+         * Extensions/profiling/profiling.py (popup_dialog_box): New config
+         variable to indicate whether the result should be shown in a
+         dialog box
+         (profile_screen_renderer, time_screen_renderer): Only show a
+         dialog box if popup_dialog_box is true.
+         (profile_screen_renderer): Flush stdout after the printing the
+         first part of the "profiling..." message
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Cache the pens and
+         brushes for the groups so that they're not created over and over
+         again
+         * Thuban/Model/classification.py (Classification.__getattr__)
+         (Classification._compile_classification)
+         (Classification._clear_compiled_classification): New. Methods to
+         manage a 'compiled' representation of the classification groups
+         which is created on demand
+         (Classification.InsertGroup, Classification.RemoveGroup)
+         (Classification.ReplaceGroup): reset the compiled representation
+         (Classification.FindGroup): Use the compiled representation to
+         find the matching group
+         (ClassGroupRange.GetRangeTuple): New. Return the range as a tuple
+-10-31  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classification.py (Classification.SetDefaultGroup):
+         Send a CLASS_CHANGED message
+         (Classification.RemoveGroup): Send a CLASS_CHANGED message and do
+         not return the removed group since it wasn't used.
+         * test/test_classification.py
+         (TestClassification.test_set_default_group): New. Test the
+         SetDefaultGroup method
+         (TestClassification.test_insert_group): New. Test the InsertGroup
+         method
+         (TestClassification.test_remove_group): New. Test the RemoveGroup
+         method
+         (TestClassification.test_replace_group): New. Test the
+         ReplaceGroup method
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (TestClassification.setUp):
+         Subscribe to the CLASS_CHANGED messages
+         (TestClassification.tearDown): New. Destroy the classification
+         properly
+         (TestClassification.test_defaults): Add tests for the default line
+         width and whether no messages were sent yet
+         (TestClassification.test_set_default_properties): Add tests for
+         messages and setting the default line width
+         (TestClassification.test_add_singleton)
+         (TestClassification.test_add_range)
+         (TestClassification.test_multiple_groups): Add tests for messages
+-10-31  Bernhard Herzog  <[email protected]>
+         Some more refactoring in preparation for new tests:
+         * test/test_classification.py (TestClassification.setUp): New.
+         Instantiate the classification here. Update the test methods
+         accordingly.
+         (TestClassification.test_multiple_groups): Make sure that the two
+         singletons matching 1 are considered different.
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (red, green, blue): New. These
+         constants were used in several cases. Update the relevant methods.
+         (TestClassification.test_defaults)
+         (TestClassification.test_set_default_properties)
+         (TestClassification.test_add_singleton)
+         (TestClassification.test_add_range)
+         (TestClassification.test_multiple_groups)
+         (TestClassification.test_deepcopy): New. These were formerly all
+         part of the single method test.
+         (TestClassification.test_deepcopy): Removed.
+         (TestClassIterator): Removed. The test case is now a method of
+         TestClassification since it tests part of the public interface of
+         Classification
+         (TestClassification.test_iterator): New. Used to be
+         TestClassIterator effectively
+-10-31  Jan-Oliver Wagner <[email protected]>
+         GUIfied the functions of the profiling extension.
+         * /Extensions/profiling/__init__.py: New: Init to make this
+         directory a package.
+         * Extensions/profiling/profiling.py: Moved menu entries to
+         the Extensions menu. Applied _() for strings.
+         (profile_screen_renderer): Catch the detailed printout and present
+         it in a dialog.
+         (time_screen_renderer): Raise a dialog to present the result instead
+         of printing it to stdout.
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (TestClassGroupProperties)
+         (TestClassGroup, TestClassGroupDefault, TestClassGroupRange)
+         (TestClassGroupSingleton, TestClassIterator, TestClassification):
+         Split TestClassification into several classes, one for each class
+         being tested. TestClassification itself now only tests
+         Classification. This split makes changes to the tests a bit easier
+-10-31  Bernhard Herzog  <[email protected]>
+         * Extensions/profiling/profiling.py: New. Extension to measure
+         Thuban performance
+-10-31  Frank Koormann <[email protected]>
+         Added two items to legend popup menu: Remove Layer and Show Layer Table
+         * Thuban/UI/legend.py (LegendPanel._OnRemoveLayer,
+         LegendPanel._OnShowTable): New event handlers, call the corresponding
+         mainwindow methods.
+         (LegendTree._OnRightClick): Added items to popup menu.
+-10-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dialogs.py (ThubanFrame.__init__): Handle
+         EVT_WINDOW_DESTROY
+         (ThubanFrame.OnDestroy): New. Handler for EVT_WINDOW_DESTROY. Does
+         nothing but is convenient for the derived classes.
+         * Thuban/UI/tableview.py
+         (TableFrame.OnDestroy, LayerTableFrame.OnDestroy): New.
+         Unsubscribe the messages here not in OnClose because that might
+         get called multiple times. Fixes RT #2196
+         (TableFrame.OnClose, LayerTableFrame.OnClose): Removed. Not needed
+         anymore.
+         * README: Update the minimum requirement for wxPython. Since we
+         now use the EVT_WINDOW_DESTROY event, we need at least 2.4.0.4,
+         the version in which that was introduced for all platforms
+-10-30  Frank Koormann <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Wrapped the major parts of
+         the join process in a ThubanBeginBusyCursor, ThubanEndBusyCursor
+         frame.
+-10-30  Jan-Oliver Wagner <[email protected]>
+         Improved APR import extension, added further EPSG definitions
+         and some cleanup regarding string class.
+         * test/test_proj.py (TestProjection.test_get_projection_units_geo):
+         Added test for alias 'longlat'.
+         * Resources/Projections/epsg-deprecated.proj: New. Contains
+         deprecated EPSG definitions.
+         * Extensions/importAPR/odb.py (ODBBaseObject.TreeInfo): Added
+         the variable names for objects.
+         * Extensions/importAPR/apr.py (APR_BLnSym, APR_BMkSym, APR_BShSym): New.
+         Copied from importAPR and provided with documentation.
+         * Extensions/importAPR/importAPR.py (APR_BLnSym, APR_BMkSym, APR_BShSym):
+         Moved to apr.py.
+         (APR_View): Added object ref 'ITheme'.
+         * Thuban/Lib/fileutil.py, Thuban/UI/proj4dialog.py: Replaced string
+         split function by corresponding use of the string class method.
+         * Thuban/Model/xmlwriter.py: Replaced string replace function by
+         corresponding string method.
+-10-29  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Speed up the
+         special case of a classification that only has the default group
+-10-27  Bernhard Herzog  <[email protected]>
+         * po/fr.po, po/es.po: Updated translations from Daniel Calvelo
+         * po/de.po: Update.
+         * Thuban/UI/application.py
+         (ThubanApplication.ShowExceptionDialog): Handle translation of the
+         dialog message properly
+-10-27  Bernhard Herzog  <[email protected]>
+         Rework how localization works so that we use wx's translation
+         functions when running Thuban as a normal application but not when
+         we don't need any UI, such as in the test suite. See the comment
+         in Thuban/__init__.py for details
+         * Thuban/__init__.py (_): Add one level of indirection to make the
+         translation handling more flexible and to make it possible to use
+         either wx's translation services or not.
+         (gettext_identity, translation_function_installed)
+         (install_translation_function): New function to help with this
+         * Thuban/UI/__init__.py: Install the wx specific translation
+         function if it's OK to do that
+         * test/support.py (initthuban): Install a dummy translation
+         function so that importing Thuban.UI doesn't install a wx specific
+         one for which would need to import wxPython
+-10-27  Bernhard Herzog  <[email protected]>
+         * HOWTO-Release: Source archives should be created first and the
+         binary packages should be created from the source archives.
+         There's an official debian package now so there's no need to test
+         the rpm on debian anymore
+-10-27  Bernhard Herzog  <[email protected]>
+         Several rendering changes:
+          - Render the selection into a separate bitmap so that only that
+            bitmap needs to be redrawn when the selection changes
+          - Render incrementally showing previews and allowing interaction
+            before rendering is complete
+          - Update the renderer interface a bit. Most parameters of
+            RenderMap are now parameters of the constructor
+         * Thuban/UI/baserenderer.py (BaseRenderer.__init__): Add the map
+         and the update region as parameters. Update the doc-string
+         (BaseRenderer.render_map_incrementally): New. Generator function
+         to renders the map incrementally
+         (BaseRenderer.render_map): Remove the map argument (it's now in
+         the constructor) and simply iterate over the
+         render_map_incrementally generator to draw the map.
+         (BaseRenderer.draw_shape_layer_incrementally)
+         (BaseRenderer.draw_shape_layer): Renamed to
+         draw_shape_layer_incrementally and changed into a generator that
+         yields True every 500 shapes. Used by render_map_incrementally to
+         render shape layers incrementally
+         * Thuban/UI/renderer.py (ScreenRenderer.RenderMap): Removed the
+         map and region parameters which are now in the constructor
+         (ScreenRenderer.RenderMapIncrementally): New. Public frontend for
+         the inherited render_map_incrementally.
+         (BaseRenderer.draw_shape_layer): Removed.
+         (ScreenRenderer.draw_selection_incrementally): New. The selection
+         drawing part of the removed draw_shape_layer as a generator
+         (ScreenRenderer.layer_shapes): Update because of the region
+         parameter change
+         (ExportRenderer.__init__): New. Extend the inherited constructor
+         with the destination region for the drawing
+         (ExportRenderer.RenderMap): Removed the map and region parameters
+         which are now in the constructor
+         * Thuban/UI/view.py (MapCanvas.PreviewBitmap): New. Return a
+         bitmap suitable for a preview in a tool
+         (CanvasPanTool.MouseMove): Use the PreviewBitmap method to get the
+         bitmap
+         (MapPrintout.draw_on_dc): Adapt to new renderer interface
+         (MapCanvas.OnPaint): Handle drawing the selection bitmap if it
+         exists
+         (MapCanvas.OnIdle): Update the logic to deal with incremental
+         rendering and the selection bitmap
+         (MapCanvas._do_redraw): Handle the instantiation of the render
+         iterator and the redraws during rendering
+         (MapCanvas._render_iterator): New. Generator to incrementally
+         redraw both bitmaps
+         (MapCanvas.Export): Adapt to new renderer interface.
+         (MapCanvas.full_redraw): Reset the selection bitmap and the
+         renderer iterator too
+         (MapCanvas.redraw_selection): New. Force a redraw of the selection
+         bitmap
+         (MapCanvas.shape_selected): Only redraw the selection bitmap
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_polygon_no_projection)
+         (TestBaseRenderer.test_raster_no_projection)
+         (TestBaseRenderer.test_point_map_projection)
+         (TestBaseRenderer.test_point_layer_and_map_projection)
+         (TestBaseRenderer.test_point_layer_projection)
+         (TestBaseRenderer.test_point_with_classification): Adapt to new
+         renderer interface
+-10-24  Bernhard Herzog  <[email protected]>
+         * libraries/thuban/wxproj.cpp (draw_polygon_shape)
+         (point_in_polygon_shape, shape_centroid): Raise an exception if
+         the shape can't be read. Previously invalid shape ids would lead
+         to a segfault.
+         * test/test_wxproj.py (TestShapeCentroid.test_invalid_shape_id):
+         New. test whether an exception is raised for invalid shape ids
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/proj.py (Projection.GetProjectedUnits): Added 'longlat'
+         as alias for 'latlong'.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Added 'longlat'
+         as alias for 'latlong'.
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.proj_selection_changed): Set
+         the projection even for the UnknownPanel.
+         (UnknownProjPanel.__init__): Define the text and create the textctrl
+         widget.
+         (UnknownProjPanel._DoLayout): Replaced static text widget by the
+         textctrl created in __init__.
+         (UnknownProjPanel.SetProjection): Set the text for the text ctrl
+         including the parameters of the projection.
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Resources/Projections/epsg.proj: New. This is a list of
+         EPSG codes with parameters for proj. The list has been
+         generated using devtools/create_epsg.py based on the
+         file nad/epsg of the proj 4.4.7 package. Four projection
+         definitions have been deleted as they are not accepted by proj:
+         "CH1903+ / LV95", "Bern 1898 (Bern) / LV03C", "CH1903 / LV03"
+         and "HD72 / EOV".
+-10-22  Bernhard Herzog  <[email protected]>
+         Some more tweaks to the projection dialog which should fix RT
+         #1886.
+         * Thuban/UI/projlist.py (ProjectionList.Destroy): Unsubscribe from
+         the ProjFile's messages and call the base class methods correctly
+         (ProjectionList.SelectProjection): Set the wxLIST_STATE_FOCUSED
+         flag on the newly selected item too. Otherwise some other item is
+         focused and the first time the focus is moved with the keyboard
+         the selection moves in unexpected ways.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Do not set the
+         focus on the OK button, only on the projection list. That way the
+         list really has the focus initially
+         (ProjFrame.OnClose): Call the projection list's Destroy method to
+         make it unsubscribe all messages
+-10-21  Bernhard Herzog  <[email protected]>
+         Rework the projection dialog to fix a few bugs, including RT 2166
+         and most of 2168
+         * Thuban/UI/projlist.py: New. The class ProjectionList is a
+         special wxListCtrl to show a list of projections in a more MVC
+         fashion
+         * Thuban/UI/projdialog.py (ProjFrame): Substantial changes
+         throughout the class. The main change is to use the ProjectionList
+         class instead of a normal wxListBox. Also, add an explicit
+         "Unknown" projection to the projection choice control.
+         (ProjPanel.__init__): Add an "unknown" ellipsoid
+         (TMPanel.__init__, LCCPanel.__init__): Tweak the order of
+         instantiation of the panel's controls to make the tab-order more
+         natural
+-10-21  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (TestSingleLayer.file_contents)
+         (TestSingleLayer.test): Add non-ascii characters to the titles of
+         session, map and layer. This is effectively a port of the
+         TestUnicodeStrings test in test_load_0_8.py which for some reason
+         was only added there.
+         * test/test_load_0_9.py (TestSingleLayer.file_contents)
+         (TestSingleLayer.test): Same as in test_load.py: add non-ascii
+         characters to the titles of session, map and layer,.
+-10-21  Bernhard Herzog  <[email protected]>
+         Add EPSG projection handling to .thuban files
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update to 1.0-dev namespace
+         (SaveSessionTest.testSingleLayer): Update to 1.0-dev namespace and
+         use a and epsg projection to test saving them
+         * test/test_load.py (LoadSessionTest.dtd): Update to 1.0-dev
+         namespace
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update to use
+.0-dev namespace
+         (TestSingleLayer.file_contents, TestSingleLayer.test): Update to
+         use 1.0-dev namespace and use an EPSG projection to test whether
+         loading it works
+         * test/test_load_0_9.py: New. Effectively a copy of test_load.py
+         as of Thuban 0.9. These are now tests to determine whether Thuban
+         can still read files generated by Thuban 0.9
+         * Thuban/Model/save.py (SessionSaver.write)
+         (SessionSaver.write_session): Use the 1.0 dtd and 1.0-dev
+         namespace
+         (SessionSaver.write_projection): Write the projection's epsg
+         attribute
+         * Thuban/Model/load.py (SessionLoader.__init__): Also accept the
+         thuban-1.0-dev.dtd namespace
+         (SessionLoader.check_attrs): Allow a callable object as conversion
+         too
+         (SessionLoader.start_projection, SessionLoader.end_projection)
+         (SessionLoader.start_parameter): Handle the epsg attribute and
+         rename a few instance variables to lower case
+         * Resources/XML/thuban-1.0.dtd: New. Only difference to
+         thuban-0.9.dtd is the epsg attribute for projections.
+-10-21  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Let the user specify which tests to run
+         on the command line
+         * test/support.py (ThubanTestResult.getDescription): Override to
+         give a better short description. The description can be used as a
+         parameter to run_tests to run that particular test in isolation.
+-10-21  Frank Koormann   <[email protected]>
+         Popup menu for legend. Scheduled for the 1.2 release this was too
+         simple to implement: The popup menu is bound to the legend tree, while
+         the events are hanlded by its anchestor, the legend panel. This
+         allows reuse of all the event handlers already implemented for the
+         legend toolbar buttons.
+         * Thuban/UI/legend.py (LegendPanel.__init__): EVT_MENU macros
+         to add handlers for the events issued by the popup menu.
+         (LegendPanel._OnToggleVisibility): Handler for toggling layer
+         visibility event
+         (LegendPanel._OnProjection): Handler for layer projection event.
+         (LegendTree.__init__): Added EVT_TREE_ITEM_RIGHT_CLICK
+         (LegendTree._OnRightClick): Event handler for right click, select item
+         and pop up menu.
+         (LegendTree.ToggleVisibility): Toggle layer visibility
+         (LegendTree.LayerProjection): Raise layer projection dialog for
+         current layer.
+-10-21  Bernhard Herzog  <[email protected]>
+         * Resources/Projections/defaults.proj: Use correct DOCTYPE
+         declaration. The top-level element is projectionlist not projfile
+-10-20  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.write_proj_file): New. helper
+         method to write a projfile and display a busy cursor and error
+         dialogs.
+         (ProjFrame._OnSave, ProjFrame._OnAddToList, ProjFrame._OnImport)
+         (ProjFrame._OnExport, ProjFrame._OnRemove): Use write_proj_file
+         (ProjFrame.__FillAvailList): Translate "<None>" too and display a
+         busy cursor while loading the user and system prj files.
+-10-16  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (projfile_cache): Introduce a cache for
+         ProjFile objects
+         (clear_proj_file_cache): New function to clear the cache. Mainly
+         useful for use by the test suite
+         (read_proj_file): Use the cache.
+         * test/test_proj.py (TestProjFile): Clarify the doc-string
+         (ProjFileReadTests): Update doc-string
+         (ProjFileReadTests.test_get_system_proj_file): Check whether the
+         system proj files is cached.
+         (ProjFileLoadTestCase): New base class for the proj file tests
+         derived from support.FileLoadTestCase to provide some common
+         behavior.
+         (TestLoadingProjFile)
+         (TestLoadingProjFileWithEmptyProjectionlist.file_contents)
+         (TestProjFileWithInvalidParameters.file_contents): Derive from
+         ProjFileLoadTestCase
+         (TestLoadingProjFile.test_caching): New. Test whether the cache
+         works
+-10-16      Silke Reimer    <[email protected]>
+         * debian/*: New directory with configuration files for building a thuban
+           deb-package.
+-10-14  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Execute support.run_tests when run as
+         __main__ so that missing unsubscribes are detected
+         (TestProjFile.tearDown): Destroy the proj_file properly
+-10-14  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (PROJECTION_ADDED)
+         (PROJECTION_REPLACED, PROJECTION_REMOVED): New message types for
+         the ProjFile objects
+         * Thuban/Model/proj.py (ProjFile): Derive from Publisher so we can
+         easily send messages when the projections change
+         (ProjFile.Add, ProjFile.Remove, ProjFile.Replace): Issue messages
+         when the change was successful
+         * test/test_proj.py (TestProjFile.setUp): Subscribe to some of the
+         proj file messages
+         (TestProjFile.test_add_remove)
+         (TestProjFile.test_remove_non_existing)
+         (TestProjFile.test_replace)
+         (TestProjFile.test_replace_non_existing): Test whether the right
+         messages are sent
+-10-14  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjFile.test): Refactor into several
+         tests
+         (TestProjFile.test_add_remove)
+         (TestProjFile.test_remove_non_existing)
+         (TestProjFile.test_replace)
+         (TestProjFile.test_replace_non_existing): Some of the new
+         individual test cases
+         (TestProjFileSimple): New class for the rest of the test cases
+         that came out of the refactoring
+         (ProjFileTest): Derive from xmlsupport.ValidationTest so that the
+         derived classes don't have to
+-10-13  Bernhard Herzog  <[email protected]>
+         Add an optional EPSG code to the projection objects and extend the
+         .proj file format accordingly.
+         * Resources/XML/projfile.dtd (element projection): Add epsg
+         attribute
+         * Thuban/Model/proj.py (Projection.__init__): New parameter and
+         instance variable epsg. Update doc-string
+         (Projection.EPSGCode, Projection.Label): New methods to provide
+         access to EPSG code and a label for use in dialogs
+         * Thuban/Model/resource.py (ProjFileReader.start_projection)
+         (ProjFileReader.end_projection, ProjFileSaver.write_projfile):
+         Handle the epsg code attribute when reading or writing proj files
+         * Thuban/UI/projdialog.py (ProjFrame._OnSave)
+         (ProjFrame._OnAddToList, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__FillAvailList): Use the projection's Label method to
+         get the string for the list box
+         * test/test_proj.py (TestProjection.test_label)
+         (TestProjection.test_label_epsg)
+         (TestProjection.test_epsgcode_for_non_epsg_projection)
+         (TestProjection.test_epsgcode_for_real_epsg_projection): New tests
+         for the label and EPSGCode methods
+         (WriteProjFileTests.doTestWrite, WriteProjFileTests.test_write)
+         (WriteProjFileTests.test_write_empty_file): Create the ProjFile
+         objects in the test cases and put the expected contents into the
+         test case methods too. Update doTestWrite accordingly
+         (TestLoadingProjFile)
+         (TestLoadingProjFileWithEmptyProjectionlist): New classes with the
+         read tests from TestProjFile.
+         (TestProjFile.doTestRead, TestProjFile.testRead): Removed. These
+         tests are now in the new classes.
+         (sample_projfile, sample_projfile_data)
+         (sample_projfile2, sample_projfile_data2): Removed. Not used
+         anymore.
+         (TestProjFile.test_read_unreadable_file): No need to reset the
+         permissions at the end anymore since we use a unique filename
+-10-13  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Some more refactoring of the test cases
+         (ProjFileTest): New base class for the proj file tests.
+         (TestProjFile): Derive from ProjFileTest
+         (TestProjFile.test_read_unreadable_file)
+         (TestProjFile.test_read_empty_file, TestProjFile.doTestRead): Use
+         the new filename method to get a unique filename
+         (TestProjFile.doTestWrite, TestProjFile.testWrite): Removed.
+         (WriteProjFileTests): New class for proj file write tests.
+         Contains the write test that were in TestProjFile originally.
+-10-13  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjFile.testRead)
+         (TestProjFile.test_read_non_existing_file)
+         (TestProjFile.test_read_unreadable_file)
+         (TestProjFile.test_read_empty_file): Split into several methods.
+-10-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/sizers.py: New file with custom sizers.
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Instantiate
+         all projection type specific panels and put them into a
+         NotebookLikeSizer. This way the dialog doesn't change its size
+         when a different projection is selected
+         (ProjFrame.__init__): Rename projection_panels
+         projection_panel_defs and reuse projection_panels for a list of
+         the instantiated panels.
+         (ProjFrame._show_proj_panel, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__DoOnProjChoice): Changes due to the new handling of
+         the panels
+         (UnknownProjPanel._DoLayout): Place the newlines in the message
+         differently to make the panel narrower.
+         (TMPanel._DoLayout): Layout the parameters in one column.
+-10-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): New method
+         that contains all the setup for the dialog's widgets, layout and
+         event handling.
+         (__): Call build_dialog to build the dialog.
+         (ProjFrame.__set_properties, ProjFrame.__do_layout): Removed.
+         Their functionality is now in build_dialog
+         (ProjFrame.__VerifyButtons, ProjFrame.__VerifyButtons)
+         (ProjFrame.__DoOnProjAvail, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__DoOnProjChoice): Small updates due to slightly
+         different widget names and hierarchy introduced with build_dialog.
+-10-10  Bernhard Herzog  <[email protected]>
+         * README: Fix typo.
+-10-09  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/proj.py (ProjFile.Add): Do not check whether the
+         projection is already in the list. This is *a lot* faster when
+         loading files with hundreds of projections since it saves a linear
+         search. OTOH this will allow adding the same projection to the
+         user.proj file multiple times in the projection dialog but we'll
+         deal with that later
+-10-09  Jan-Oliver Wagner <[email protected]>
+         * devtools: New. Directory for developer tools that are not intended
+         for the regular user.
+         * devtools/create_epsg.py: New. Convert the epsg file of proj into
+         a python .proj file.
+-10-09  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py
+         (TestProjection.test_get_parameter_without_equals_sign): New. Test
+         whether GetParameter handles parameters without "=" sign correctly
+         * Thuban/Model/proj.py (Projection.GetParameter): Handle
+         parameters that do not contain a "=". Update the doc-string
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__set_properties): Remove the
+         length limit on the projname text control
+-10-08  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjection.test_get_projection_units_geo)
+         (TestProjection.test_get_projection_units_normal): New. Tests for
+         the Projection.GetProjectedUnits method
+-10-08  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/resource.py (get_user_proj_file): small bug-fix:
+         Added missing 'val' parameter.
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): When the
+         projection type of the currently selected projection is not known,
+         i.e. there's no panel for it, use the UnknownProjPanel
+         (ProjFrame.__DoOnProjChoice, ProjFrame._show_proj_panel): Split
+         the actual replacing of the proj panel into the new method
+         _show_proj_panel.
+         (UnknownProjPanel): Add doc-string.
+         (UnknownProjPanel._DoLayout): Insert a newline into the text so
+         that the panel is not so wide.
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (read_proj_file): Return the warnings
+         too. Update the doc-string
+         (get_proj_files): Removed. It wasn't used anywhere
+         (get_system_proj_files, get_system_proj_file): Rename to
+         get_system_proj_file and return the ProjFile object and not a list
+         of ProjFile objects. Update the callers.
+         (get_user_proj_files, get_user_proj_file): Rename to
+         get_user_proj_file return the ProjFile object and not a list of
+         ProjFile objects. Update the callers.
+         (ProjFileReader.__init__): New instance variable for the warnings.
+         Rename the __pf ivar to projfile. Update the methods referring to
+         __pf
+         (ProjFileReader.end_projection): Catch any errors raised when
+         instantiating the projection and record that as an error. The
+         projection will not be in the final ProjFile object.
+         (ProjFileReader.GetWarnings): New method to return the warnings.
+         * Thuban/UI/projdialog.py (ProjFrame.show_warnings): New method to
+         show the warnings from the projfile reader
+         (ProjFrame._OnImport): Deal with any warnings returned by
+         read_proj_file
+         (ProjFrame.__FillAvailList): Deal with any warnings returned by
+         get_system_proj_file or get_user_proj_file.
+         * test/test_proj.py (TestProjFile.doTestRead): Check the warnings.
+         (TestProjFileWithInvalidParameters.file_contents): New test cases
+         to test whether read_proj_file handles invalid projection
+         parameters correctly
+         (TestProjFile.test_get_system_proj_file): New. Simple test for
+         resource.get_system_proj_file
+-10-07  Bernhard Herzog  <[email protected]>
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStoreExceptions.tearDown): Clear the session
+         properly so that the temporary directories get deleted correctly
+-10-06  Bernhard Herzog  <[email protected]>
+         Handle the title changes in a proper MVC way.
+         * Thuban/UI/mainwindow.py (MainWindow.__init__): Subscribe to the
+         canvas' TITLE_CHANGED messages
+         (MainWindow.update_title): New. Update the main window's title
+         (MainWindow.__SetTitle): Removed. Use update_title instead.
+         (MainWindow.SetMap): Use update_title instead of __SetTitle
+         (MainWindow.RenameMap): Do change the window title explicitly
+         here. That's handled in a proper MVC way now.
+         (MainWindow.title_changed): New. Subscriber for the TITLE_CHANGED
+         messages
+         * Thuban/Lib/connector.py (Conduit): New class to help classes
+         that forward messages
+         * Thuban/UI/viewport.py: Forward the map's TITLE_CHANGED messages
+         (ViewPort): Derive from Conduit instead of Publisher
+         (ViewPort.Subscribe, ViewPort.Unsubscribe): Use the new base class
+         when calling the inherited versions
+         (ViewPort._subscribe_map, ViewPort._unsubscribe_map): New helper
+         methods to subscribe and unsubscribe map messages
+         (ViewPort.SetMap, ViewPort.Destroy): Use the new helper methods to
+         handle the map subscriptions
+         (ViewPort.Map, ViewPort.map_projection_changed)
+         (ViewPort.layer_projection_changed): Add or update doc-strings
+         * test/test_connector.py (TestPublisher.test_issue_simple): Fix
+         typo
+         (MyConduit): Helper class for the Conduit test.
+         (TestConduit): Test cases for Conduit
+         * test/test_connector.py: Use support.run_tests as main.
+         * test/test_viewport.py (ViewPortTest.setUp): Also subscribe to
+         the TITLE_CHANGED messages
+         (ViewPortTest.test_forwarding_title_changed): New test to check
+         whether the viewport forwards the map's TITLE_CHANGED messages
+         (TestViewportWithPostGIS.tearDown): Call the map's Destroy method
+         after the port's because the latter may require a still functional
+         map.
+-10-06  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.maps_changed): Add
+         doc-string
+-10-06  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (ViewPortTest.setUp)
+         (SimpleViewPortTest.test_init_with_size): Move the test for the
+         initial size as a constructor parameter from ViewPortTest.setUp
+         method to a new separate test in SimpleViewPortTest.
+-10-06  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (MockView): New class derived from
+         ViewPort with a mock implementation of GetTextExtent to be used in
+         the test cases
+         (ViewPortTest.setUp): Use MockView instead of ViewPort
+         * Thuban/UI/viewport.py (ViewPort.GetTextExtent): Turn this method
+         into what would be a "pure virtual function" in C++: always raise
+         NotImplementedError. Mock implementations for test cases don't
+         belong into the real code
+-10-02  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.test_empty_layer): Explicitly
+         close the dbf file we create so that it's contents have been
+         written properly.
+         * libraries/shapelib/shptree.c, libraries/shapelib/shpopen.c,
+         libraries/shapelib/shapefil.h, libraries/shapelib/dbfopen.c:
+         Update to shapelib 1.2.10
+-10-01  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tree.py, Thuban/UI/main.py: Remove the #! line as
+         it annoys lintian which warns about these files not being
+         executable. The #! isn't necessary here since if you absolutely
+         must execute them you can always say "python <filename>".
+-09-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classgen.py (GenQuantiles0): Removed since it's
+         only used in GREAT-ER but not used in Thuban itself. When GREAT-ER
+         is ported to a newer the import will fail, so it should be noticed
+         immediately that this function is gone.
+         Fixes RT#1919
+-09-26  Bernhard Herzog  <[email protected]>
+         Add a DTD for the projection files and make thuban write valid
+         projection files
+         * Resources/XML/projfile.dtd: New. DTD for thuban's projection
+         files
+         * Thuban/Model/resource.py (ProjFileSaver.write): Use
+         'projectionlist' as the name in the document type declaration so
+         that it matches the element type of the root element.
+         * test/test_proj.py (sample_projfile, sample_projfile2): Use
+         'projectionlist' as the name in the document type declaration just
+         as it is done now in the files thuban would write
+         (sample_projfile, sample_projfile_data): Fix spelling of
+         "Mercator"
+         (TestProjFile.doTestWrite): Validate the written and the expected
+         XML data
+         (TestProjFile): Derive from ValidationTest so that we can run xml
+         validation tests
+-09-24  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend): Do not
+         modify the list returned by map.Layers() in place since it is the
+         actual list of layers used by the map.
+-09-23  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added subsection to chapter
+         Extensions to describe the extensions coming with the Thuban
+         standard package (gns2shp and importAPR).
+-09-23  Bernhard Herzog  <[email protected]>
+         * libraries/thuban/wxproj.cpp (project_point): if there's an
+         inverse but no forward projection, convert to degrees after
+         applying the inverse projection. Fixes RT#2096
+         * test/test_wxproj.py: New. Test cases for wxproj.so. One test
+         implicitly tests for the fix to RT#2096
+         * test/support.py (FloatComparisonMixin.assertFloatSeqEqual):
+         Check that the sequences have the same lengths
+         * Resources/Projections/defaults.proj (Geographic projection): Use
+         a much more precise value for the to_meter attribute.
+-09-22  Bernhard Herzog  <[email protected]>
+         * test/support.py (initthuban): Make sure to unset the LANG env.
+         var. so that tests that compare translated strings work. Solves RT
+         #2094
+-09-22  Jan-Oliver Wagner <[email protected]>
+         Small improvement of APR import.
+         * Extensions/importAPR/test/test_apr.py (aprTest.test_LClass):
+         Added tests for text-ranges.
+         * Extensions/importAPR/apr.py (APR_LClass.GetThubanRange): Now
+         returns a string object if the range is based on text.
+         * Extensions/importAPR/importAPR.py (import_apr_dialog): Unified
+         range retrieval.
+-09-22  Jan-Oliver Wagner <[email protected]>
+         Initial version of the importAPR extension which is in
+         experimental state.
+         * /Extensions/importAPR/, /Extensions/importAPR/samples/,
+         /Extensions/importAPR/test/: New directories.
+         * /Extensions/importAPR/samples/README: New: Howto load the samples.
+         * /Extensions/importAPR/samples/iceland.apr: New: A sample APR
+         file which refers to the Thuban Iceland demo data.
+         * /Extensions/importAPR/test/README: New: Howto execute the tests.
+         * /Extensions/importAPR/test/test_apr.py: New: Tests for APR classes.
+         * /Extensions/importAPR/apr.py: New: Classes for ArcView Objects
+         as in '.apr'-files.
+         * /Extensions/importAPR/odb.py: New: Classes for generic ArcView
+         ODB Objects as in '.apr', '.avl' and other files.
+         * /Extensions/importAPR/__init__.py: New: Init to make this
+         directory a package.
+         * /Extensions/importAPR/importAPR.py: New: Import a ArcView
+         project file (.apr) and convert it to Thuban.
+-09-22  Jan-Oliver Wagner <[email protected]>
+         * Extensions/gns2shp.gns2shp.py: The main module of gns2shp.
+-09-19  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Extended section 'Installation'
+         with description on RPM installation and RPM binary package
+         creation.
+-09-18  Bernhard Herzog  <[email protected]>
+         * setup.py (data_files): Only add the mo files if the Locales
+         directory actually exists, so that setup.py works with a fresh CVS
+         checkout
+-09-12  Jan-Oliver Wagner <[email protected]>
+         * Examples/simple_extensions/simple_tool.py: bugfix: Tool is now
+         in viewport, not anymore in view
+-09-04  Jan-Oliver Wagner <[email protected]>
+         Introducing first Extension (gns2shp).
+         * Extensions, Extensions/gns2shp, Extensions/gns2shp/test: New.
+         * Extensions/__init__.py: New. init to make this dir a package.
+         * Extensions/gns2shp/__init__.py: New. init to make this dir a package.
+         * Extensions/gns2shp/test/README: New. some info on this test directory.
+         * Extensions/gns2shp/test/ls.txt: New. test data set (Liechtenstein).
+         * Extensions/gns2shp/test/test_gns2shp.py: New. Test for correct creation
+         of Shapefile from GNS text file format
+-09-03  Jan-Oliver Wagner <[email protected]>
+         Fix/workaround for bug #2019:
+         https://intevation.de/rt/webrt?serial_num=2019
+         * Thuban/UI/identifyview.py (IdentifyView.ID_STOP): New.
+         (IdentifyView.__init__): Added another button that allows to
+         stop the identify mode.
+         (IdentifyView.OnStop): New. Stops the identify mode.
+-09-03  Jan-Oliver Wagner <[email protected]>
+         Introducing a new exception dialog that allows to exit the
+         application immediately.
+         This fixes bug #2060: https://intevation.de/rt/webrt?serial_num=2060
+         * Thuban/UI/exceptiondialog.py: New. A special exception dialog.
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Made strings available to translations. Exchanged the simple
+         ScrolledMessageDialog by the new ExceptionDialog.
+-09-01  Bernhard Herzog  <[email protected]>
+         * NEWS: New. Summary of changes and release notes.
+         * MANIFEST.in: Add NEWS
+-09-01  Bernhard Herzog  <[email protected]>
+         * MANIFEST.in: Correct the include statement for the mo-files and
+         include the documentation too.
+         * setup.py (data_files): Add the .mo files
+         (setup call): Up to version 0.9.0
+-09-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dbdialog.py (ChooseDBTableDialog.__init__): Change the
+         parameter list to just parent and session
+         (ChooseDBTableDialog.__set_properties): Removed. Setting the
+         selection of empty list boxes is not allowed (and produces C++
+         assertion errors) and the rest of the setup is better done in
+         __init__ anyway.
+         (ChooseDBTableDialog.OnCancel, ChooseDBTableDialog.OnOK)
+         (ChooseDBTableDialog.OnLBDClick, DBDialog.OnOK): Use the Python
+         builtins True/False for booleans to avoid warnings from wxPython
+         * Thuban/UI/mainwindow.py (MainWindow.AddDBLayer): Adapt to new
+         ChooseDBTableDialog constructor parameters.
+-09-01  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py
+         (PostGISTable): Extend doc-string
+         (PostGISTable._fetch_table_information): Set the column index
+         correctly, pretending ignored columns don't exist.
+         * test/test_postgis_db.py (TestPostGISIgnoredColumns): New tests
+         for postgis tables with data types not yet supported by thuban.
+-08-29  Bernhard Herzog  <[email protected]>
+         * HOWTO-Release: Tweak item about running the tests.
+-08-29  Jan-Oliver Wagner <[email protected]>
+         * /Doc/manual/thuban-manual.xml: updated to version 1.0pre2.
+-08-29  Bernhard Herzog  <[email protected]>
+         Add some missing parameters to projections. Proj complains about
+         them on windows but for some reason not on Linux.
+         * test/test_save.py (SaveSessionTest.testLayerProjection): Add
+         missing required projection parameters
+         * test/test_proj.py (TestProjFile.test): Add missing required
+         projection parameters
+         * test/test_load_0_8.py (TestLayerProjection.file_contents)
+         (TestLayerProjection.test): Add missing required projection
+         parameters and tests for them
+         * test/test_load.py (TestLayerProjection.file_contents)
+         (TestLayerProjection.test): Add missing required projection
+         parameters and tests for them
+         * test/test_layer.py (TestLayer.test_base_layer): Add missing
+         required projection parameters
+-08-29  Bernhard Herzog  <[email protected]>
+         * libraries/pyprojection/Projection.i: Use pj_get_errno_ref to
+         access the pj_errno because directly accessing pj_errno doesn't
+         work on windows if the proj library is in a DLL
+         * libraries/pyprojection/Projection_wrap.c: Update from Projection.i
+-08-28  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Import things from Thuban after calling
+         initthuban
+         * test/test_load.py (LoadSessionTest.filenames): New class
+         variable with the filename attributes to normalize
+         (LoadSessionTest.check_format): Pass self.filenames to
+         sax_eventlist to normalize the filename attributes
+         * test/xmlsupport.py: Add cvs keywords
+         (SaxEventLister.__init__): New parameter filenames which indicates
+         attributes that contain filenames
+         (SaxEventLister.startElementNS): Normalize the filename attributes
+         with os.path.normpath
+         (sax_eventlist): New parameter filenames to pass through to
+         SaxEventLister
+         * test/test_derivedshapestore.py: Make this file callable as a
+         program to execute the tests
+         (TestDerivedShapeStoreExceptions.test_table_with_wrong_size): Bind
+         the session to self.session so that it gets destroyed properly
+         * test/test_layer.py (TestLayer.tearDown): Call the session's
+         Destroy method
+         * test/test_map.py (TestMapBase.tearDown): Destroy self.session
+         too if it exists
+         (TestMapAddLayer.test_add_layer): Bind the session to self.session
+         so that it gets destroyed properly
+         * test/postgissupport.py (reason_for_not_running_tests): Add a
+         test for the existence of popen2.Popen4.
+         * test/test_save.py (SaveSessionTest.tearDown): New. Provide a
+         reliable way to destroy the sessions created in the test cases
+         (SaveSessionTest.test_dbf_table): Bind the session to self.session
+         so that it gets destroyed properly
+         (SaveSessionTest.testLayerProjection): Bind the session to
+         self.session so that it gets destroyed properly
+         * test/test_session.py (UnreferencedTablesTests.tearDown): Make
+         sure that the session is destroyed properly
+         * test/test_shapefilestore.py: Make this callable as a program to
+         execute the tests
+         * test/test_scalebar.py: Remove unnecessary import of _ from
+         Thuban
+         * test/support.py (print_garbage_information): Call initthuban
+         here because it may be called indirectly from test cases that test
+         test support modules which do not use anything from thuban itself
+         (ThubanTestProgram.runTests): Remove unnecessary debug print
+-08-28  Bernhard Herzog  <[email protected]>
+         * Thuban/version.py (longversion): Update to 0.9
+         * Thuban/UI/mainwindow.py: Remove some unused imports
+         * README: Add section about required additional software. Add date
+         and revision CVS keywords
+         * HOWTO-Release: Add item about the translations. Add date and
+         revision CVs keywords and change formatting to match README a bit
+         better
+         * po/de.po: Update for 0.9
+         * test/README: Tweak the wording a little because many tests are
+         not really unittest.
+-08-27  Bernhard Herzog  <[email protected]>
+         As preparation for the 0.9 release, switch thuban files to a
+         non-dev namespace
+         * Thuban/Model/save.py (SessionSaver.write_session): Write files
+         with the http://thuban.intevation.org/dtds/thuban-0.9.dtd
+         namespace
+         * Thuban/Model/load.py (SessionLoader.__init__): Accept the
+         http://thuban.intevation.org/dtds/thuban-0.9.dtd namespace too
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update for new namespace
+         * test/test_load.py (LoadSessionTest.dtd, TestSingleLayer)
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update for new
+         namespace
+-08-27  Bernhard Herzog  <[email protected]>
+         Make the table interface distinguish between row ids (an integer
+         that uniquely identifies a row) and row ordinals (a simple row
+         count from 0 to NumRows() - 1)
+         * Thuban/Model/postgisdb.py (PostGISTable.RowIdToOrdinal)
+         (PostGISTable.RowOrdinalToId): New methods to conver between row
+         ids and row ordinals
+         (PostGISTable.ReadRowAsDict, PostGISTable.ReadValue): New keyword
+         parameter row_is_ordinal to indicate whether the row parameter is
+         the row id or the ordinal
+         * Thuban/Model/transientdb.py (TransientTableBase.RowIdToOrdinal)
+         (TransientTableBase.RowOrdinalToId)
+         (AutoTransientTable.RowIdToOrdinal)
+         (AutoTransientTable.RowOrdinalToId): Same new methods as in
+         PostGISTable.
+         (TransientTableBase.ReadRowAsDict, TransientTableBase.ReadValue)
+         (AutoTransientTable.ReadRowAsDict, AutoTransientTable.ReadValue):
+         Same new parameter as in PostGISTable.
+         * Thuban/Model/table.py (DBFTable.RowIdToOrdinal)
+         (DBFTable.RowOrdinalToId, MemoryTable.RowIdToOrdinal)
+         (MemoryTable.RowOrdinalToId): Same new methods as in PostGISTable.
+         (DBFTable.ReadValue, DBFTable.ReadRowAsDict)
+         (MemoryTable.ReadValue, MemoryTable.ReadRowAsDict): Same new
+         parameter as in PostGISTable.
+         * Thuban/UI/tableview.py (DataTable.RowIdToOrdinal)
+         (DataTable.RowOrdinalToId): New methods to convert between row ids
+         and row ordinals.
+         (TableGrid.SelectRowById): New method to select a row based on its
+         ID as opposed to its ordinal
+         (DataTable.GetValue, TableGrid.OnRangeSelect)
+         (TableGrid.OnSelectCell, LayerTableGrid.select_shapes)
+         (QueryTableFrame.OnQuery, QueryTableFrame.get_selected)
+         (LayerTableFrame.__init__): Convert between row ids and row
+         ordinals as appropriate
+         * test/postgissupport.py (PostGISDatabase.__init__): Add
+         doc-string.
+         (PostGISDatabase.initdb): The optional third item in a tuple in
+         tables is now a (key, value) list with additional arguments to
+         pass to upload_shapefile
+         (upload_shapefile): New parameter gid_offset to allow gids that
+         are not the same as the shapeids in the shapefile
+         (PostgreSQLServer.get_default_static_data_db): Use the new
+         gid_offset to make the gids in landmarks 1000 higher than the
+         shapeids in the shapefile
+         * test/test_viewport.py
+         (TestViewportWithPostGIS.test_find_shape_at_point): Adapt to the
+         new shapeids in the landmarks table
+         * test/test_transientdb.py
+         (TestTransientTable.run_iceland_political_tests)
+         (TestTransientTable.test_transient_joined_table): Add tests for
+         the new table methods and new keywords arguments.
+         * test/test_postgis_db.py
+         (TestPostGISTable.test_read_row_as_dict_row_count_mode)
+         (TestPostGISTable.test_read_value_row_count_mode)
+         (TestPostGISTable.test_row_id_to_ordinal)
+         (TestPostGISTable.test_row_oridnal_to_id): New test for the new
+         table methods and the new arguments
+         (TestPostGISShapestorePoint.test_shapes_in_region)
+         (TestPostGISShapestorePoint.test_shape_raw_data)
+         (TestPostGISShapestorePoint.test_shape_points)
+         (TestPostGISShapestorePoint.test_shape_shapeid)
+         (TestPostGISShapestorePoint.test_all_shapes)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_read_value)
+         (TestPostGISTable.test_read_row_as_dict): Adapt to the new
+         shapeids in the landmarks table
+         * test/test_memory_table.py
+         (TestMemoryTable.test_read_row_as_dict_row_count_mode)
+         (TestMemoryTable.test_read_value_row_count_mode)
+         (TestMemoryTable.test_row_id_to_ordinal)
+         (TestMemoryTable.test_row_oridnal_to_id): New test for the new
+         table methods and the new arguments
+         * test/test_dbf_table.py
+         (TestDBFTable.test_read_row_as_dict_row_count_mode)
+         (TestDBFTable.test_read_value_row_count_mode)
+         (TestDBFTable.test_row_id_to_ordinal)
+         (TestDBFTable.test_row_oridnal_to_id): New test for the new table
+         methods and the new arguments
+-08-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISShapeStore.BoundingBox): Use a
+         more postgis specific but much faster method to get the bounding
+         box
+-08-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISTable.Title)
+         (PostGISShapeStore.AllShapes): Add these missing methods.
+         (PostGISShapeStore.ShapesInRegion): No need to raise
+         StopIteration. We can simply return
+         * test/test_postgis_db.py (TestPostGISTable.test_title)
+         (TestPostGISShapestorePoint.test_all_shapes): New tests for the
+         new methods
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (shapetype_map): Add MUTLIPOLYGON.
+         * test/test_postgis_db.py (PolygonTests): New class containing
+         those tests from TestPostGISShapestorePolygon that can also be
+         used to test MUTLIPOLYGON tables
+         (TestPostGISShapestorePolygon): Most tests are now in PolygonTests
+         so derive from that
+         (TestPostGISShapestoreMultiPolygon): New class with tests for
+         MUTLIPOLYGON tables
+         * test/postgissupport.py (PostGISDatabase.initdb): Allow the
+         tables argument to have tuples with three items to override the
+         WKT type used.
+         (PostgreSQLServer.get_default_static_data_db): Use the above to
+         create a polygon table with MUTLIPOLYGONs
+         (point_to_wkt, coords_to_point, polygon_to_wkt, coords_to_polygon)
+         (arc_to_wkt, coords_to_multilinestring): Rename from *_to_wkt to
+         coords_to*
+         (coords_to_multipolygon): New. Convert to MUTLIPOLYGON
+         (wkt_converter): New. Map WKT types to converters
+         (upload_shapefile): New parameter force_wkt_type to use a
+         different WKT type than the default
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py
+         (ThubanApplication.run_db_param_dialog): New. Suitable as a
+         db_connection_callback. Main difference is that the dialog run
+         from this method doesn't have a parent so it can be used even when
+         there is no main window
+         (ThubanApplication.OpenSession): Use self.run_db_param_dialog if
+         no db_connection_callback was given. This way the dialog pops up
+         even when the .thuban file was given as a command line parameter.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnLeftUp): Release the the mouse
+         before calling MouseLeftUp. MouseLeftUp may pop up modal dialogs
+         which leads to an effectively frozen X session because the user
+         can only interact with the dialog but the mouse is still grabbed
+         by the canvas.
+         Also, call the tool's Hide method before MouseLeftUp because
+         MouseLeftUp may change the tool's coordinates.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): Catch
+         LoadCancelled exceptions and handle them by returning immediately.
+-08-25  Bernhard Herzog  <[email protected]>
+         GUI part of loading sessions with postgis connections which may
+         require user interaction to get passwords or updated parameters
+         * Thuban/UI/dbdialog.py (DBDialog): Reimplement to make it look a
+         bit nucer and be more generic.
+         (DBFrame.OnAdd): Adapt to new DBDialog interface
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): New
+         optional parameter db_connection_callback which is passed to
+         load_session.
+         * Thuban/UI/mainwindow.py (MainWindow.run_db_param_dialog): New.
+         Suitable as a db_connection_callback
+         (MainWindow.OpenSession): Use self.run_db_param_dialog as the
+         db_connection_callback of the application's OpenSession method
+-08-25  Bernhard Herzog  <[email protected]>
+         Basic loading of sessions containing postgis connections:
+         * Thuban/Model/load.py (LoadError): Add doc-string
+         (LoadCancelled): New exception class to indicate a cancelled load
+         (SessionLoader.__init__): Add the db_connection_callback parameter
+         which will be used by the loader to get updated parameters and a
+         password for a database connection
+         (SessionLoader.__init__): Add the new XML elements to the
+         dispatchers dictionary
+         (SessionLoader.check_attrs): Two new conversions, ascii to convert
+         to a byte-string object and idref as a generic id reference
+         (SessionLoader.start_dbconnection)
+         (SessionLoader.start_dbshapesource): New. Handlers for the new XML
+         elements
+         (load_session): Add the db_connection_callback to pass through the
+         SessionLoader
+         * test/test_load.py (TestPostGISLayer, TestPostGISLayerPassword):
+         New classes to test loading of sessions with postgis database
+         connections.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (__ThubanVersion__): Remove this and
+         replace it and the comment with __BuildDate__ by the Source: and
+         Id: cvs keywords as used in the other files.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.check_attrs): Raise a
+         LoadError when a required attribute is missing. The code used to
+         be commented out for some reason, but probably should have been
+         active.
+         * test/test_load.py (TestLoadError.test): Test the message in the
+         LoadError too to make sure it really is about the missing
+         attribute
+-08-22  Bernhard Herzog  <[email protected]>
+         * test/test_save.py (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Add XML validation tests.
+-08-22  Bernhard Herzog  <[email protected]>
+         Implement saving a session with a postgis connection
+         * Resources/XML/thuban-0.9.dtd (dbconnection, dbshapesource) New
+         elements for database connections and shapestores using db
+         connections
+         (session): Add the dbconnections to the content model
+         * Thuban/Model/save.py (SessionSaver.write_db_connections): New.
+         Write the db connections
+         (SessionSaver.write_session): Call write_db_connections to write
+         the connection before the data sources
+         (SessionSaver.write_data_containers): Handle postgis shapestores
+         * test/test_save.py (SaveSessionTest.thubanids)
+         (SaveSessionTest.thubanidrefs): Update for new DTD
+         (SaveSessionTest.test_save_postgis): New. Test saving a session
+         with postgis connections
+         * Thuban/Model/postgisdb.py (PostGISTable.DBConnection)
+         (PostGISTable.TableName): New accessor methods for the connection
+         and table name
+         * test/test_postgis_db.py (TestPostGISTable.test_dbconn)
+         (TestPostGISTable.test_dbname): New methods to test the new
+         PostGISConnection methods
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (ConnectionError): New exception class
+         for exceptions occurring when establishing a Database connection
+         (PostGISConnection.connect): Catch psycopg.OperationalError during
+         connects and raise ConnectionError.
+         * test/test_postgis_db.py (TestPostgisDBExceptions): New class for
+         tests for database exceptions
+-08-22  Bernhard Herzog  <[email protected]>
+         Prepare the test suite for tests with required authentication
+         * test/postgissupport.py (PostgreSQLServer.__init__): Add instance
+         variables with two predefined users/passwords, one for the admin
+         and one for a non-privileged user.
+         (PostgreSQLServer.createdb): Pass the admin name to initdb and add
+         the non-privileged user to the database and set the admin password
+         (PostgreSQLServer.wait_for_postmaster): Use the admin user name.
+         Better error reporting
+         (PostgreSQLServer.connection_params)
+         (PostgreSQLServer.connection_string): New methods to return
+         information about how to connect to the server
+         (PostgreSQLServer.execute_sql): New. Convenience method to execute
+         SQL statements
+         (PostgreSQLServer.require_authentication): Toggle whether the
+         server requires authentication
+         (PostgreSQLServer.create_user, PostgreSQLServer.alter_user): New.
+         Add or alter users
+         (PostGISDatabase.initdb): Pass the admin name one the
+         subprocesses' command lines. Grant select rights on
+         geometry_columns to everybody.
+         (upload_shapefile): Use the admin name and password when
+         connecting. Grant select rights on the new table to everybody.
+         * test/test_viewport.py (TestViewportWithPostGIS.setUp): Use the
+         server's new methods to get the connection parameters.
+         * test/test_postgis_session.py (TestSessionWithPostGIS.setUp)
+         (TestSessionWithPostGIS.test_remove_dbconn_exception): Use the
+         server's new methods to get the connection parameters.
+         * test/test_postgis_db.py
+         (TestPostGISConnection.test_gis_tables_empty)
+         (TestPostGISConnection.test_gis_tables_non_empty)
+         (PostGISStaticTests.setUp): Use the server's new methods to get
+         the connection parameters.
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Add the psycopg version.
+         * Thuban/version.py: Add psycopg version
+         * Thuban/Model/postgisdb.py (psycopg_version): New. Return the
+         version of the psycopg module
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dbdialog.py (DBPwdDlg): Removed because it's not used.
+         (DBFrame.OnEdit): Removed because it's not used and wouldn't work
+         at the moment. The functionality should probably be implemented
+         some time, though.
+         (DBFrame.OnRemove): Display a message if the connection can't be
+         removed because it's still in use.
+-08-22  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): split up the huge about
+         text into elements/lists for easier translation. This fixes bug
+         https://intevation.de/rt/webrt?serial_num=2058
+         Also, made some forgotten string available for the i18n.
+-08-21  Bernhard Herzog  <[email protected]>
+         Make postgis support really optional including insensitive menu
+         items.
+         * Thuban/Model/postgisdb.py (has_postgis_support): New. Return
+         whether the postgis is supported.
+         * Thuban/UI/dbdialog.py: Put the psycopg import into try..except
+         to make postgis support optional
+         * Thuban/UI/mainwindow.py (_has_postgis_support): New. Context
+         version of Thuban.Model.postgisdb.has_postgis_support
+         (database_management command): Make it only sensitive if postgis
+         is supported.
+-08-21  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added CVS revision for rev-history.
+         (section Adding and Removing Layers): Added text and described
+         multi-selection.
+         (chapter Extensions): New.
+-08-21  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Changed dialog
+         settings to allow multiple files to load into the map.
+         Also reduced selection to *.shp as a default.
+-08-20  Bernhard Herzog  <[email protected]>
+         Add dialogs and commands to open database connections and add
+         database layers.
+         * Thuban/UI/mainwindow.py (MainWindow.DatabaseManagement): New
+         method to open the database connection management dialog
+         (MainWindow.AddDBLayer): New method to add a layer from a database
+         (_has_dbconnections): New helper function to use for sensitivity
+         (database_management command, layer_add_db command): New commands
+         that call the above new methods.
+         (main_menu): Add the new commands to the menu.
+         * Thuban/Model/postgisdb.py (PostGISConnection.__init__)
+         (PostGISConnection.connect): Establish the actual connection in a
+         separate method and call it in __init__. This makes it easier to
+         override the behavior in test cases
+         (PostGISConnection.BriefDescription): New method to return a brief
+         description for use in dialogs.
+         * test/test_postgis_db.py (NonConnection): DB connection that
+         doesn't actually connect
+         (TestBriefDescription): New class with tests for the new
+         BriefDescription method
+-08-19  Jan-Oliver Wagner <[email protected]>
+         Moved anything from extensions to libraries.
+         * libraries: New.
+         * libraries/ pyprojection, pyshapelib, shapelib, thuban: New.
+         * libraries/pyprojection/ LICENSE, MANIFEST.in, Projection.i,
+         Projection.py, Projection_wrap.c, setup.py, swighelp.txt: These files have
+         been moved here from thuban/extensions/pyprojection/
+         See there in the Attic for the older history.
+         * libraries/pyshapelib/ COPYING, ChangeLog, NEWS, README, dbflib.i,
+         dbflib.py, dbflib_wrap.c, pyshapelib_api.h, pytest.py, setup.py,
+         shapelib.i, shapelib.py, shapelib_wrap.c, shptreemodule.c: These files
+         have been moved here from thuban/extensions/pyshapelib/
+         See there in the Attic for the older history.
+         * libraries/shapelib/ dbfopen.c, shapefil.h, shpopen.c, shptree.c: These
+         files have been moved here from thuban/extensions/shapelib/
+         See there in the Attic for the older history.
+         * libraries/thuban/ bmpdataset.cpp, cpl_mfile.cpp, cpl_mfile.h,
+         gdalwarp.cpp, wxproj.cpp: These files have been moved here from
+         thuban/extensions/thuban/
+         See there in the Attic for the older history.
+         * MANIFEST.in, setup.cfg, setup.py: renamed extensions to libraries.
+         * extensions/thuban/ bmpdataset.cpp, cpl_mfile.cpp, cpl_mfile.h,
+         gdalwarp.cpp, wxproj.cpp: Moved to libraries/thuban.
+         * extensions/shapelib/ dbfopen.c, shapefil.h, shpopen.c, shptree.c:
+         Moved to libraries/shapelib.
+         * extensions/pyshapelib/ COPYING, NEWS, dbflib.py, pytest.py,
+         shapelib.py, README, dbflib_wrap.c, setup.py, shapelib_wrap.c,
+         ChangeLog, dbflib.i, pyshapelib_api.h, shapelib.i, shptreemodule.c:
+         Moved to libraries/pyshapelib.
+         * extensions/pyprojection/ MANIFEST.in, Projection.py, setup.py,
+         LICENSE, Projection.i, Projection_wrap.c, swighelp.txt:
+         Moved to libraries/pyprojection.
+         * extensions/ pyprojection, pyshapelib, shapelib, thuban: Removed.
+         * extensions: Removed.
+-08-19  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (ViewPortTest): We don't use the
+         facilities of FileTestMixin so don't derive from it.
+         (TestViewportWithPostGIS): New class with tests for using a
+         viewport on a map with postgis layers.
+-08-19  Bernhard Herzog  <[email protected]>
+         Add the db connection management to the session.
+         * Thuban/Model/session.py (Session.__init__): New instance
+         variable db_connections
+         (Session.AddDBConnection, Session.DBConnections)
+         (Session.HasDBConnections, Session.CanRemoveDBConnection)
+         (Session.RemoveDBConnection): New methods to manage and query the
+         db connections managed by the session
+         (Session.OpenDBShapeStore): New method to open a shapestore from a
+         db connection
+         * Thuban/Model/messages.py (DBCONN_REMOVED, DBCONN_ADDED): New
+         messages for the db connection handling in the session
+         * test/test_postgis_session.py: New. test cases for the session's
+         db connection handling with postgis connections
+-08-19  Bernhard Herzog  <[email protected]>
+         Add very basic postgis database support and the corresponding test
+         cases. The test cases require a PostgreSQL + postgis installation
+         but no existing database. The database will be created
+         automatically by the test cases
+         * test/README: Add note about skipped tests and the requirements
+         of the postgis tests.
+         * Thuban/Model/postgisdb.py: New. Basic postgis database support.
+         * test/test_postgis_db.py: New. Test cases for the postgis
+         support.
+         * Thuban/Model/wellknowntext.py: New. Parser for well-known-text
+         format
+         * test/test_wellknowntext.py: New. Test cases for the
+         wellknowntext parser
+         * test/postgissupport.py: New. Support module for tests involving
+         a postgis database.
+         * test/support.py (execute_as_testsuite): Shut down the postmaster
+         if it's still running after the tests
+         * Thuban/Model/data.py (RAW_WKT): New constant for raw data in
+         well known text format
+-08-19  Jan-Oliver Wagner <[email protected]>
+         * Examples/simple_extensions/hello_world.py: New. Raises a Hello World
+         message dialog.
+-08-18  Bernhard Herzog  <[email protected]>
+         * test/support.py (ThubanTestResult.printErrors): Indent the
+         reason for the skips in the output to make it a bit more readable.
+         (execute_as_testsuite): New helper function to run a test suite
+         and print some more information.
+         (run_tests): Use execute_as_testsuite to run the tests
+         * test/runtests.py (main): Use execute_as_testsuite to run the
+         tests
+-08-18  Bernhard Herzog  <[email protected]>
+         Fix some bugs in Thuban and the test suite that were uncovered by
+         changes introduced in Python 2.3:
+         * Thuban/Model/table.py (DBFTable.__init__): Make sure the
+         filename is an absolute name
+         * Thuban/Model/layer.py (RasterLayer.__init__): Make sure the
+         filename is an absolute name
+         * test/test_save.py (SaveSessionTest.testRasterLayer): Use a
+         unique filename to save to and use the correct relative filename
+         in the expected output.
+         (SaveSessionTest.test_dbf_table): Use the correct relative
+         filename in the expected output.
+         * test/test_layer.py (TestLayer.test_raster_layer): Update the
+         test to check whether the filename is absolute.
+-08-18  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Added Silke Reimer.
+-08-15  Bernhard Herzog  <[email protected]>
+         Change the way shapes are returned by a shape store. The
+         ShapesInRegion method returns an iterator over actual shape
+         objects instead of a list of shape ids.
+         * Thuban/Model/data.py (ShapefileShape.ShapeID): New. Return shape
+         id.
+         (ShapefileStore.ShapesInRegion): Return an iterator over the
+         shapes which yields shape objects instead of returning a list of
+         shape ids
+         (ShapefileStore.AllShapes): New. Return an iterator over all
+         shapes in the shape store
+         (DerivedShapeStore.AllShapes): New. Like in ShapefileStore
+         * Thuban/Model/layer.py (Layer.ShapesInRegion): Update
+         doc-string.
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.layer_ids, BaseRenderer.layer_shapes): Rename to
+         layer_shapes and make it return an iterator containg shapes
+         instead of a list of ids.
+         (BaseRenderer.draw_shape_layer): Update doc-string; Adapt to
+         layer_shapes() change
+         * Thuban/UI/renderer.py (ScreenRenderer.layer_ids)
+         (ScreenRenderer.layer_shapes): Rename as in BaseRenderer
+         * Thuban/UI/viewport.py (ViewPort._find_shape_in_layer): Adapt to
+         changes in the ShapesInRegion return value.
+         (ViewPort._get_hit_tester): Remove commented out code
+         * test/mockgeo.py (SimpleShapeStore.ShapesInRegion): Adapt to the
+         new return value.
+         (SimpleShapeStore.AllShapes): New. Implement this method too.
+         * test/test_layer.py (TestLayer.test_arc_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_point_layer)
+         (TestLayer.test_point_layer_with_projection)
+         (TestLayer.test_derived_store): Adapt to changes in the
+         ShapesInRegion return value.
+         * test/test_shapefilestore.py
+         (TestShapefileStoreArc.test_shapes_in_region)
+         (TestShapefileStorePolygon.test_shapes_in_region)
+         (TestShapefileStorePoint.test_shapes_in_region): Adapt to changes
+         in the ShapesInRegion return value.
+         (TestShapefileStorePoint.test_all_shapes)
+         (TestShapefileStoreArc.test_shape_shapeid): New tests for the new
+         methods
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.test_shapes_in_region): Adapt to changes in
+         the ShapesInRegion return value.
+         (TestDerivedShapeStore.test_all_shapes)
+         (TestDerivedShapeStore.test_shape_shapeid): New tests for the new
+         methods
+-08-15  Bernhard Herzog  <[email protected]>
+         Make the renderers deal correctly with raw vs. python level
+         representation of shape geometries
+         * Thuban/UI/baserenderer.py (BaseRenderer.low_level_renderer):
+         Return a flag useraw in addition to the callable and the parameter
+         to indicate whether the callable can deal with the raw shape data
+         or uses the higher level python lists of coordinates. The callable
+         now should accept either the raw data or the return value of the
+         shape's Points() method.
+         (BaseRenderer.draw_shape_layer): Adapt to the low_level_renderer
+         change
+         (BaseRenderer.projected_points): Instead of the shape id use the
+         points list as parameter.
+         (BaseRenderer.draw_polygon_shape, BaseRenderer.draw_arc_shape)
+         (BaseRenderer.draw_point_shape): Adapt to projected_points()
+         change and accept the points list as parameter instead of the
+         shape id.
+         * Thuban/UI/renderer.py (MapRenderer.low_level_renderer): Return
+         the useraw flag as required by the BaseRenderer
+         (ScreenRenderer.draw_shape_layer): Adapt to low-level renderer
+         changes.
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_point_with_classification): New test for
+         rendering a map with classifications.
+-08-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at)
+         (ViewPort._find_shape_in_layer, ViewPort._find_shape_in_layer)
+         (ViewPort._get_hit_tester, ViewPort.projected_points)
+         (ViewPort._hit_point, ViewPort._hit_arc, ViewPort._hit_polygon)
+         (ViewPort._find_label_at): Split the find_shape_at method into
+         several new methods and use the functions in the hit-test module.
+         * Thuban/UI/hittest.py: New module with Python-level hit-testing
+         functions
+         * test/test_hittest.py: New. Test for the new hittest module
+-08-15  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.ShapesInRegion): Apply the layer
+         projection to all corners of the bounding box to get a better
+         approximation of the projected bounding box
+         * test/test_layer.py (TestLayer.test_point_layer_with_projection):
+         New. Test coordinate handling of a layer with a projection.
+         Catches the bug fixed in Layer.ShapesInRegion
+-08-15  Bernhard Herzog  <[email protected]>
+         Move some of the mock objects in test_baserenderer into their own
+         module so they can easily be used from other tests
+         * test/mockgeo.py: New test helper module with some mock objects
+         for geometry related things like shapes, shapestores and
+         projections.
+         * test/test_mockgeo.py: New. Tests for the new helper module
+         * test/test_baserenderer.py: Some of the mock-objects are in
+         mockgeo now.
+-08-12  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Added Bj�rn Broscheit.
+-08-12  Bernhard Herzog  <[email protected]>
+         * po/de.po: New. German translations by Bjoern Broscheit
+-08-12  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UnknownProjPanel._DoLayout): Translated
+         strings have to be one string literal.
+-08-11  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin.assertPointListEquals):
+         New. This method was used in various derived classes, but it's
+         better to have it here.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertPointListEquals): Removed. It's now in
+         FloatComparisonMixin
+         * test/test_layer.py (TestLayer.assertPointListEquals): Removed.
+         It's now in FloatComparisonMixin
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertPointListEquals): Removed. It's now
+         in FloatComparisonMixin
+-08-11  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Add missing space to
+         error message
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Now use authorgroup. Added revhistory
+         with version number.
+         Changed title to reflect version number of Thuban.
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Reworked the hall of fame. Now
+         the list corresponds to the "About" web page.
+-08-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/proj4dialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Make sure
+         translated strings are recognized as one string literal.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): Make
+         sure translated strings are recognized as one string literal.
+-08-07  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.RawShapeFormat): New.
+         Simply delegates to the original shapestore.
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.test_raw_format): New. Test case for
+         DerivedShapeStore.RawShapeFormat
+-08-07  Bernhard Herzog  <[email protected]>
+         Add raw data interface to shape objects.
+         * Thuban/Model/data.py (ShapefileShape, Shape): Rname the shape
+         class to ShapefileShape which now holds shapefile specific
+         information.
+         (ShapefileShape.compute_bbox): Simplified to not cache any
+         information. The way this method is used that shouldn't matter
+         performance wise.
+         (ShapefileShape.RawData): New. Return the shapeid which is the raw
+         data format for shapes from shapefiles.
+         (ShapefileStore.RawShapeFormat): New. Return the raw datatype used
+         in the shape objects returned by a shapestore. For a
+         ShapefileStore this is always RAW_SHAPEFILE.
+         (RAW_PYTHON, RAW_SHAPEFILE): Constants for the RawShapeFormat
+         method.
+         * test/test_shapefilestore.py
+         (TestShapefileStore.test_raw_format): New test to test the raw
+         format feature of shapes.
+         * Thuban/Model/layer.py: Remove the unused import of Shape from
+         data. It was only there for interface compatibility but it's not
+         used inside of Thuban and the generic Shape class has gone away.
+         * Thuban/UI/renderer.py (MapRenderer.low_level_renderer): Check
+         the raw data format and only use an optimized version of its a
+         shapefile.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/test_baserenderer.py (SimpleShape): Shape class for the
+         tests.
+         (SimpleShapeStore.Shape): Use SimpleShape instead of
+         Thuban.Model.data.Shape to make the tests independed of the coming
+         changes.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/support.py (SkipTest, ThubanTestResult, ThubanTestRunner)
+         (ThubanTestProgram): New classes that extend the respective
+         classes from unittest. These new version support skipping tests
+         under certain expected conditions. In the Thuban test suite we
+         uses this for tests that require the optional gdal support.
+         (run_tests): Use ThubanTestProgram instead of the unittest.main()
+         * test/runtests.py (main): Use the new ThubanTestRunner instead of
+         the normal one from unittest
+         * test/test_layer.py (TestLayer.test_raster_layer): If this test
+         is not run because gdal support isn't available report this to the
+         runner.
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_raster_no_projection): Do not run this test
+         if gdal support isn't available and report this to the runner.
+-08-06  Bernhard Herzog  <[email protected]>
+         Rearrange the renderers a bit, partly in preparation for changes
+         required for the postgis merge, partly to make it more testable.
+         Also make the representation of coordinates in Shapes more
+         consistent.
+         * Thuban/UI/renderer.py (MapRenderer): Most of the code/methods in
+         this class is now in BaseRenderer. This class is now practically
+         only a specialization of BaseRenderer for rendering to an actual
+         wx DC.
+         (ScreenRenderer.draw_shape_layer): Use self.low_level_renderer()
+         to get the shapetype specific rendering functions.
+         * Thuban/UI/baserenderer.py: New file with the basic rendering
+         logic. The code in this file is completely independend of wx.
+         (BaseRenderer): Class with the basic rendering logic
+         * test/test_baserenderer.py: New. Test cases for BaseRenderer
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         error_on_redraw to guard agains endless loops and stack overflows
+         when there's a bug in the rendering code that raises exceptions.
+         (MapCanvas.OnIdle, MapCanvas._do_redraw): Split the actual
+         rendering into a separate method _do_redraw so that error handling
+         is a bit easier. When an exception occurs, set error_on_redraw to
+         true. When it's true on entry to OnIdle do nothing and return
+         immediately.
+         * Thuban/Model/data.py (ShapefileStore.Shape): For consistency, a
+         Shape object will always have the coordinates as a list of list of
+         coordinate pairs (tuples).
+         (Shape.compute_bbox): Adapt to new representation.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at)
+         (ViewPort.LabelShapeAt): Adapt to new coordinate representation in
+         Shape objects.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertFloatTuplesEqual)
+         (ShapefileStoreTests.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestShapefileStoreArc.test_shape)
+         (TestShapefileStorePolygon.test_shape)
+         (TestShapefileStorePoint.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+         * test/test_layer.py (TestLayer.assertFloatTuplesEqual)
+         (TestLayer.assertPointListEquals): Rename to assertPointListEquals
+         and change purpose to checking equality of the lists returned by
+         Shape.Points().
+         (TestLayer.test_arc_layer, TestLayer.test_arc_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_point_layer)
+         (TestLayer.test_derived_store): Use the new assertPointListEquals
+         instead of assertFloatTuplesEqual
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertFloatTuplesEqual)
+         (TestDerivedShapeStore.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestDerivedShapeStore.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+-08-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (UTMPanel._OnPropose): Added test for
+         a bounding box. A dialog is raised in case, no bounding box
+         is found. This fixes bug #2043:
+         https://intevation.de/rt/webrt?serial_num=2043
+-08-05  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/color.py (Color.__repr__): Make the repr of a color
+         object look like a Color instantiation. Formerly it looked like a
+         tuple.
+         * test/test_color.py (TestColor.test_repr)
+         (TestColor.test_equality, TestColor.test_inequality): New. test
+         some more apects of the Color class
+         (TestTransparent.test_repr, TestTransparent.test_hex)
+         (TestTransparent.test_equality): New. Test cases for the
+         Transparent object.
+-08-04  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: a number of small improvements.
+         The resulting file is the version submitted for GREAT-ER II.
+-08-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/resource.py, Thuban/UI/projdialog.py,
+         Thuban/UI/join.py, Thuban/UI/classgen.py, Thuban/UI/about.py,
+         Thuban/Model/resource.py: Insert cvs keywords and doc-strings.
+         * Thuban/UI/common.py: Insert cvs keywords and doc-strings.
+         (Color2wxColour, wxColour2Color, ThubanBeginBusyCursor)
+         (ThubanEndBusyCursor): Add doc-strings
+-08-01  Bernhard Herzog  <[email protected]>
+         First step towards PostGIS integration. More abstraction by movin
+         more code from the layer to the shapestore. More methods of the
+         layer are now simply delegated to the equivalent method of the
+         shapestore. The SHAPETYPE_* constants are now in data not in
+         layer.
+         * Thuban/Model/data.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Move these constants and classes from
+         layer.py to data.py
+         (ShapefileStore.__init__): More Initialization for the new methods
+         and functionality.
+         (ShapefileStore.ShapeType, ShapefileStore.NumShapes)
+         (ShapefileStore.BoundingBox, ShapefileStore.ShapesInRegion)
+         (ShapefileStore.Shape): New methods that were formerly implemented
+         in the layer.
+         (DerivedShapeStore.Shape, DerivedShapeStore.ShapesInRegion)
+         (DerivedShapeStore.ShapeType, DerivedShapeStore.NumShapes)
+         (DerivedShapeStore.BoundingBox): New. DerivedShapeStore
+         equivalents of the new shape methods. These versions are simply
+         delegated to the original shapstore.
+         * Thuban/Model/layer.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Removed. They're now in data.py
+         (Layer.SetShapeStore): Removed the initializatin of instance
+         variables that were needed for the stuff that's now in
+         ShapefileStore
+         (Layer.BoundingBox, Layer.NumShapes, Layer.ShapeType)
+         (Layer.Shape, Layer.ShapesInRegion): Simply delegate to the
+         shapestore.
+         * Thuban/UI/classifier.py, Thuban/UI/renderer.py,
+         Thuban/UI/viewport.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         * test/test_shapefilestore.py: New. Tests for ShapefileStore.
+         * test/test_derivedshapestore.py: New. Tests for DerivedShapeStore.
+         * test/test_layer.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         (TestLayer.test_derived_store): Remove the test for the exception
+         when instantiating the DerivedShapeStore with an incompatible
+         table which is now in test_derivedshapestore.py. Add some more
+         tests of the layer methods to determine whether they work for a
+         DerivedShapeStore as well.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the list of required packages
+         by just listing the name and where they can be found.
+-07-31  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml:
+         Changed the screenshot elements to figure.
+         Changed some variablelist elements to itemizedlist.
+         Added section on GDAL formats.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added a few sentences about
+         the Fix Border Color option when generating classes.
+-07-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Add docstrings. Rename specific
+         Ramp instances to use lower_case_style.
+         * Thuban/UI/classgen.py: Use renamed Ramp instances.
+         * Thuban/UI/classifier.py: Add docstrings.
+         * Thuban/UI/dock.py: Add docstrings.
+         * test/test_classgen.py: Use renamed Ramp instances.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (QueueingPublisher): Removed. This class
+         was never used in Thuban.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Use the table's Title()
+         method directly instead of going through the transient_table
+         method. This faster because transient_table may force the copy of
+         a DBF file into the transient database and setting a table's title
+         doesnm't affect the title of the associated transient table, so
+         this fixes RT #2042
+         * Thuban/UI/main.py (__version__): Don't import the already
+         removed show_exception_dialog.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Put back this method and remove the equivalent function since we
+         are setting the exception hook from within this class (OnInit).
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/5_2_custom_ramp.png,
+         Doc/manual/images/5_2_quantiles.png,
+         Doc/manual/images/5_2_uniform_dist.png,
+         Doc/manual/images/5_2_unique_values.png,
+         Doc/manual/images/8_int_error.png: New screen shots.
+         * Doc/manual/thuban-manual.xml: Fixed typos and wording, clarified
+         some points, and added more screen shots.
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py: Remove the now unused import of warnings
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (SimpleStore): Removed. This class has been
+         deprecated since before the 0.8 release and isn't used in Thuban
+         itself anymore.
+         * Thuban/Model/transientdb.py: Remove some unnecessary imports
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OnInit): set the
+         python exception hook here so that we are sure to catch any
+         Thuban exception that happen during initialization.
+         * Thuban/UI/main.py (main): Don't set the exception hook here,
+         it will get set in ThubanApplication.OnInit.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Removed and called it show_exception_dialog() so that the exception
+         handler can be set before the class is created.
+         * Thuban/UI/main.py (main): Install the exception handler before
+         a ThubanApplication is created.
+-07-29  Bernhard Herzog  <[email protected]>
+         * po/it.po: New. Italian translation by Maurizio Napolitano
+         * po/ru.po: New. Russian translation by Alex Shevlakov
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Extended section on supported
+         projections.
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: gaspell-checked.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/3_5_legend.png: Added border to improve look
+         on white background.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fixed grammar and typos. Added
+         descriptions for the legend toolbar.
+         * Doc/manual/images/4_2_raster_layer_properties.png: Removed
+         cursor from dialog box.
+-07-28  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: More screenshots and more chapters.
+         * Doc/manual/images/2_4_session_tree.png,
+         Doc/manual/images/3_5_legend.png, Doc/manual/images/3_rename_map.png,
+         Doc/manual/images/4_2_layer_properties.png,
+         Doc/manual/images/4_2_raster_layer_properties.png,
+         Doc/manual/images/5_3_genclass.png,
+         Doc/manual/images/5_classification.png,
+         Doc/manual/images/6_projection.png,
+         Doc/manual/images/7_1_table_view.png,
+         Doc/manual/images/7_2_5_join.png: New screenshots.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Chapter on Projection Management.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added EPS images and wrote
+         chapter on Layer Management.
+         * Doc/manual/Makefile: New. Makefile to generate all formats for the
+         manual and images.
+-07-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/range.py, Thuban/version.py: Remove the #! line as
+         it annoys lintian which warns about these files not being
+         executable. The #! isn't necessary here since if you absolutely
+         must execute them you can always say "python <filename>".
+         * Thuban/UI/renderer.py (ScreenRenderer.draw_shape_layer): Remove
+         superfluous code to set brush and pen for point shapes
+         * Thuban/UI/viewport.py: Remove commented out code that wouldn't
+         belong in viewport anyway
+-07-24  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added section on table management.
+-07-24  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Recognize the long "verbose" option
+         correctly.
+-07-22  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Continue to write first revision
+         of the manual.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Wrap method
+         with Begin/EndDrawing() calls to ensure we aren't doing to
+         many updates to the dc during rendering.
+         (ScreenRenderer.draw_shape_layer): self.draw_point_shape takes
+         a pen and brush argument so they need to be passed to the function.
+         * Thuban/UI/viewport.py (ViewPort.calc_min_max_scales): New.
+         Calculates the minimum and maximum scale values. Factored out
+         of set_view_transform so that it could be used to zoom all the
+         way into a single point.
+         (ViewPort.set_view_transform): Call calc_min_max_scales().
+         (ViewPort.FitSelectedToWindow): Zoom to the maximum scale
+         if only a single point is selected.
+         * Doc/manual/images/1_2_legend_close.png,
+         Doc/manual/images/1_2_legend_dock.png,
+         Doc/manual/images/1_2_mainwindow.png,
+         Doc/manual/images/1_2_mainwindow.ps,
+         Doc/manual/images/1_2_mainwindow.sk,
+         Doc/manual/images/3_2_fullextent.png,
+         Doc/manual/images/3_2_fulllayerextent.png,
+         Doc/manual/images/3_2_fullshapeextent.png,
+         Doc/manual/images/3_2_pan.png,
+         Doc/manual/images/3_2_zoomin.png,
+         Doc/manual/images/3_2_zoomout.png,
+         Doc/manual/images/3_3_identify.png,
+         Doc/manual/images/3_3_label.png,
+         Doc/manual/images/3_5_invisible.png,
+         Doc/manual/images/3_5_movedown.png,
+         Doc/manual/images/3_5_moveup.png,
+         Doc/manual/images/3_5_props.png,
+         Doc/manual/images/3_5_tobottom.png,
+         Doc/manual/images/3_5_totop.png,
+         Doc/manual/images/3_5_visible.png: New. Images for the documentation.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/messages.py (MAP_REPLACED): New message.
+         * Thuban/UI/viewport.py (ViewPort.SetMap): Issue MAP_REPLACED
+         after the new map has been assigned
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages):
+         Delegate MAP_REPLACED to the canvas too
+         (MainWindow.prepare_new_session): Removed. Thanks to the new
+         MAP_REPLACED message it's no longer needed
+         (MainWindow.OpenSession, MainWindow.NewSession):
+         prepare_new_session has been removed.
+         * Thuban/UI/classifier.py (Classifier.__init__): Subscribe to
+         MAP_REPLACED so that we can close the dialog if a new map is set.
+         (Classifier.unsubscribe_messages): Unsubscribe from MAP_REPLACED
+         (Classifier.map_replaced): Handle MAP_REPLACED by closing the
+         dialog
+         * test/test_viewport.py (SimpleViewPortTest)
+         (SimpleViewPortTest.test_default_size): Add doc-strings
+         (ViewPortTest.setUp): Bind map to self.map so we can use it in
+         tests. Subscribe to MAP_REPLACED messages too.
+         (ViewPortTest.tearDown): No need to explicitly unsubscribe
+         (ViewPortTest.test_set_map): New test for the SetMap method.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (SimpleViewPortTest.test_default_size):
+         Move this test from ViewPortTest.setUp to this new separate test
+         case. setUp is not the place for the actual tests.
+         (ViewPortTest.test_inital_settings, ViewPortTest.setUp): Move some
+         more of the test from setUp to the new test test_inital_settings.
+         (ViewPortTest.test_win_to_proj, ViewPortTest.test_proj_to_win)
+         (ViewPortTest.test_proj_conv): Split test_proj_conv into
+         test_win_to_proj and test_proj_to_win and make the tests easier to
+         understand
+         (ViewPortTest.testFitRectToWindow, ViewPortTest.testZoomFactor)
+         (ViewPortTest.testZoomOutToRect, ViewPortTest.testTranslate)
+         (ViewPortTest.test_unprojected_rect_around_point)
+         (ViewPortTest.test_find_shape_at, ViewPortTest.testTools):
+         Reformat to increase readability.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnLeftDown): Capture the mouse.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/runtests.py: The test suite can now be run without an X
+         connection. To make sure this remains true, remove the DISPLAY
+         environment variable so that an error occurs if the wxGTK is
+         imported accidentally
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py: Remove unused imports
+         * Thuban/UI/view.py: Remove unused imports
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_export.py Remove unused imports. The OutputTransform
+         function is now in viewport.py and is called output_transform
+         (TestScalebar.test_output_transform)
+         (TestScalebar.test_OutputTransform): Renamed to
+         test_output_transform and updated to use output_transform instead
+         of OutputTransform
+         * Thuban/UI/view.py (OutputTransform): Moved to viewport.py and
+         renamed.
+         (MapCanvas.Export, MapPrintout.draw_on_dc): OutputTransform was
+         renamed to output_transform
+         * Thuban/UI/viewport.py (OutputTransform, output_transform):
+         Rename to output_transform
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.__init__): Rename
+         classificationField to classificatin_column and init it here so
+         that it can be used in SetClassificationColumn
+         (Layer.GetClassificationColumn, Layer.GetClassificationField):
+         Rename to GetClassificationColumn.
+         (Layer.SetClassificationColumn, Layer.SetClassificationField):
+         Rename to SetClassificationColumn and issue a LAYER_CHANGED
+         message if the column changes.
+         (Layer._classification_changed, Layer.ClassChanged): Rename to
+         _classification_changed. Update the callers.
+         (Layer.SetShapeStore): Further field->column renames.
+         * Thuban/Model/load.py (SessionLoader.start_classification)
+         (SessionLoader.start_clpoint): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/Model/save.py (SessionSaver.write_classification): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/classifier.py (Classifier.__init__)
+         (Classifier._OnTry, Classifier._OnRevert): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Updates because
+         of field->column method name changes in the Layer class
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.testClassifiedLayer): Update because of
+         field->column method name changes in the Layer class
+         * test/test_layer.py (SetShapeStoreTests.setUp)
+         (SetShapeStoreTests.test_sanity): Update because of field->column
+         method name changes in the Layer class
+         (TestLayerModification.setUp): Subscribe to LAYER_CHANGED as well
+         (TestLayerModification.test_sanity)
+         (TestLayerModification.test_initial_settings): remove unsued code
+         and rename to test_sanity.
+         (TestLayerModification.test_set_classification): New test for
+         SetClassification and SetClassificationField.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_classgen.py (TestFixedRamp.test): Extend test to check
+         the non-fixed values as well. The old test would have accepted a
+         fixed ramp that only returnes the fixed properties
+-07-17  Jonathan Coles   <[email protected]>
+         * Doc/manual/mainwindow.png, Doc/manual/mainwindow.xcf: Screen
+         shots for the manual. The XCF file is the source image and
+         has additional layers to support changes.
+         * Doc/manual/thuban-manual.xml: Wrote an initial Introduction.
+         * Thuban/UI/classifier.py (Classifier.__BuildClassification):
+         Return both the new class and the field name.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Don't
+         fit the map to the window as this changes any zoom level that
+         the user may have set.
+-07-16  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles): Remove
+         fixes parameter, but maintain the same functionality by having
+         the calling function pass a FixedRamp object for the ramp.
+         (FixedRamp): New. Adapts a ramp to have fixed property values.
+         * Thuban/Model/classification.py: Use new CLASS_CHANGED message.
+         (Classification): Inherit from Publisher.
+         (Classification.__init__): Remove the layer parameter.
+         Classifications no longer need to have a parent layer.
+         (Classification.GetField, Classification.GetFieldType,
+         Classification.SetFieldInfo): Removed. The field name is stored
+         in the layer, and the type can be retreived by calling
+         Layer.GetFieldType().
+         (Classification._set_layer, Classification.GetLayer): Removed.
+         Classifications no longer have a parent layer.
+         * Thuban/Model/layer.py (Layer.Destroy): Unsubscribe from the
+         classification.
+         (Layer.SetShapeStore): Reset the classification first while
+         we still have the old shape store to work with.
+         (Layer.GetClassificationField, Layer.SetClassificationField):
+         New. Method for getting/setting the field to classify on.
+         (Layer.SetClassification): Simplified now that the layer
+         simply has to hold a reference to the classification and not
+         tell the classification who owns it.
+         Fixes RTbug #2023.
+         * Thuban/Model/load.py (SessionLoader.start_classification):
+         Set the field name on the layer, not the classification.
+         * Thuban/Model/messages.py: Add CLASS_CHANGED for when a
+         classification is modified.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Get the field name and type from the layer.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Renamed
+         parameter records to rows and add docstring. Fixes RTbug #1997.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Use a fixed
+         ramp when we need to fix certain values of a ramp rather than
+         using the old fixes parameter. Fixes RTbug #2024.
+         * Thuban/UI/classifier.py (ClassGrid.CreateTable): Add fieldType
+         parameter.
+         (ClassTable.Reset): Add fieldType parameter and use it, rather
+         than asking the classification.
+         (Classifier.__init__): Remember the original class's field
+         and ask the layer for the field type, rather than the classification.
+         (Classifier.__SetGridTable): Retrieve the field and field type
+         for the table because they are not in the classification.
+         (Classifier._OnTry, Classifier._OnRevert): Set the classification
+         field on the layer in addition to the classification itself.
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Get the
+         classification field from layer.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Get the
+         classification field from layer. Split up tests and remove
+         *-imports. Fixes RTbug #1992.
+         * test/test_classgen.py (TestFixedRamp): Test for the FixedRamp class.
+         * test/test_classification.py
+         (TestClassification.test_classification): Remove tests for methods
+         that no longer exist.
+         * test/test_layer.py (SetShapeStoreTests.setUp): Classification
+         __init__ no longer has a field parameter, use SetClassificationField.
+         (SetShapeStoreTests.test_sanity): Use layer object to get class
+         field info.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Use
+         SetClassificationField on layer to set class field info.
+         * test/test_viewport.py: Renamed from test/test_view.py.
+-07-16  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added authors and an initial
+         coarse structure.
+-07-15  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin): This is a mix-in class
+         and therefore should not be derived from any other class.
+         * test/test_range.py (RangeTest): FloatComparisonMixin is a
+         mix-in, so derive from TestCase as well.
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Rework the
+         draw_func handling a bit to remove one layer of indirection. This
+         makes the renderer about 10% faster in the non-classifying case
+         and the code a bit cleaner
+         (MapRenderer.draw_point_shape): Add the pen and brush parameters
+         and set them in the dc. Now the draw_point_shape method and
+         wxproj's draw_polygon_shape function have basically the same
+         signature so that both can be directly used as draw_func
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/save.py (SessionSaver.write_classification): Encode
+         string values (in addition to the labels) as UTF 8
+         * Thuban/Model/load.py (SessionLoader.start_clpoint): Decode the
+         values if the field type is string
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Test
+         saving a session with non-ascii string classification values.
+         * test/test_load.py (TestClassification.file_contents)
+         (TestClassification.test): Check for non-ascii values in string
+         classifications
+-07-14  Jonathan Coles   <[email protected]>
+         * test/test_view.py: New. Tests for ViewPort.
+-07-14  Frank Koormann   <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.start_map): Encode map
+         title to latin1.  Fixes https://intevation.de/rt/webrt?serial_num=2013
+         * test/test_load_0_8.py (TestUnicodeStrings): New, test load of
+         unicode strings from session file: session title, map title and
+         projection name.
+-07-10  Jonathan Coles   <[email protected]>
+         * Thuban/UI/viewport.py (Tool.MouseUp): Should have called
+         drag_stop, not drag_move when the mouse is released.
+-07-10  Jonathan Coles   <[email protected]>
+         The most important part of this is the seperation of view.py into
+         two pieces. viewport.py now has a class called ViewPort which
+         contains all the non-wx parts of view.py and can therefore be
+         tested. view.py contains only the wx-specific parts and is fairly
+         simple.
+         * Thuban/UI/view.py: Stripped out all non-wx functionality. Fixes
+         RTTbug #1992.
+         * Thuban/UI/viewport.py: New. Contains non-wx view functionality.
+         RTTbug #1992.
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles):
+         Added 'fixes' parameter so that property attributes can
+         be held constant over the generated classification groups.
+         (CustomRamp.GetProperties): Remove unused variables.
+         * Thuban/Model/map.py (Map.SetProjection): Send the old
+         projection as an argument to listeners of the MAP_PROJECTION_CHANGED
+         event.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Added 'records'
+         parameter which is a list of records that restricts which
+         records are saved. Fixes RTbug #1997.
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Port exception dialog from GREAT-ER. Fixes RTbug #1993.
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__): Add controls
+         to allow the user to fix line color/width on generated groups.
+         (ClassGenDialog.OnOK): Use new 'fixes' parameter of the generate_*
+         functions to optionally fix group properties.
+         * Thuban/UI/main.py (main): Set exception hook to the
+         ShowExceptionDialog. Fixes RTbug #1993.
+         * Thuban/UI/mainwindow.py (MainWindow.ShowTableView): Raise
+         the table window when it is selectd to be shown.
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): Add an
+         Export Selection button and move the export buttons underneath
+         the table.
+         (QueryTableFrame.UpdateStatusText): Added event argument so
+         that it can respond to grid selection events. The status text
+         is now updated even when the table is not associated with a
+         layer as was previously assumed.
+         (QueryTableFrame.OnGridSelectRange, OnGridSelectCell): Removed.
+         UpdateStatusText responds to these events.
+         (QueryTableFrame.OnSaveAs): Renamed to doExport.
+         (QueryTableFrame.doExport): Helper function that saves the
+         entire table, or selected rows, to a file.
+         (QueryTableFrame.OnExport, QueryTableFrame.OnExportSel): New.
+         Respond to export button events and call doExport.
+         * extensions/thuban/gdalwarp.cpp (ProjectRasterFile): Make sure
+         the function doesn't return NULL without first setting a Python
+         Error.
+         * test/runtests.py (main): Only print "Unknown option" for
+         unsupported options.
+         * test/support.py (FloatComparisonMixin.assertFloatEqual): Take
+         optional epsilon argument to specify floating point accuracy.
+         (FloatComparisonMixin.assertFloatSeqEqual): Call assertFloatEqual
+         for each item test.
+         * test/test_csv_table.py (TestCSVTable.test_table_to_cvs): Add
+         tests for saving selected records.
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         tests for saving selected records.
+         * test/test_map.py (TestMapWithContents.test_set_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_session.py
+         (TestSessionWithContent.test_forward_map_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_table.py (TableTest): Update tests to use non-deprecated
+         functions.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientTableBase.Width): The type
+         constants in the column objects are the standard ones defined in
+         the table module.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transienttable_to_dbf): New. Test whether
+         exporting transient tables as DBF works. This should catch the bug
+         just fixed in TransientTableBase.Width.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classgen.py (CustomRamp.GetProperties): Compute the
+         interpolated colors correctly.
+         * test/test_classgen.py (TestCustomRamp.test_color_interpolation):
+         New. Test case for the fix in classgen.py
+-07-08  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Make the default output less verbose
+         and add a verbosity option (-v) to get the old output
+-07-08  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.9.dtd: New. This will become the DTD for
+.9.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.JoinType):
+         New. Return the join type
+         * Thuban/Model/save.py (SessionSaver.write_session): Use new 0.9
+         DTD
+         (SessionSaver.write_data_containers): Save the join type for
+         joined tables
+         * Thuban/Model/load.py (SessionLoader.__init__): Add the new 0.9
+         namespace
+         (SessionLoader.start_jointable): Handle the jointype attribute
+         * test/test_load_0_8.py: New. Effectively a copy of test_load.py
+         as of Thuban 0.8. These are now tests to determine whether Thuban
+         can still read files generated by Thuban 0.8
+         * test/test_load.py (LoadSessionTest.dtd)
+         (TestSingleLayer.file_contents)
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestJoinedTable.file_contents)
+         (TestLoadError.file_contents): Update for new DTD
+         (TestJoinedTable.file_contents, TestJoinedTable.setUp): Add test
+         for new join type attribute
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Update for new DTD
+         (SaveSessionTest.test_joined_table): Add test for new join type
+         attribute
+-07-04  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (_find_dbf_column_names): New. Helper
+         function for table_to_dbf
+         (table_to_dbf): Deal with names longer than the 10 character limit
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         doc-string
+         (TestTableToDBF.test_table_to_dbf_long_col_names): New test for
+         long column names
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the CVS Revision Tag syntax
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml, Doc/manual/README: New. Skeleton
+         for the Thuban manual and README with some basic information about
+         the manual
+-07-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__init__):
+         Update doc-string
+         (TransientJoinedTable.create): Do not modify the column objects of
+         the input tables in place and copy all columns of the input tables
+         into the joined table after all.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_name_collisions_dont_modify_in_place):
+         New test case for a bug which modified the column objects in place
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): Make sure maxValue isn't less than
+         one, otherwise we could divide by zero.
+         * test/test_classgen.py (ClassGenTest.doClassRangeTest,
+         ClassGenTest.doClassSingleTest): Call doBoundsTest to
+         check the end classification groups against the
+         proper property values.
+         (ClassGenTest.doBoundsTest): New. Checks the first and
+         last classification groups to make sure their properties
+         are the correct upper and lower bounds for a color ramp.
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): The denominator was one to high when
+         calculating the index for the ramp causing the index
+         to never to reach one.
+-07-02  Jonathan Coles   <[email protected]>
+         Changed the singature of ClassGroupRange.__init__ and
+         ClassGroupRange.SetRange() so that the min/max values are
+         passed as a tuple. This makes a better calling scheme for
+         when a Range object is passed instead.
+         * Thuban/Model/classgen.py: Fixed parameters to
+         ClassGroupRange constructor.
+         * Thuban/Model/classification.py (ClassGroupRange.__init__):
+         Consolidate the min/max parameters into a single _range which
+         can either be a tuple or a Range object.
+         (ClassGroupRange.SetRange): Consolidate the min/max parameters
+         into a single _range which can either be a tuple or a Range object.
+         * Thuban/Model/load.py (SessionLoader.start_clrange): Fix
+         call to ClassGroupRange constructor to use a tuple.
+         * Thuban/Model/layer.py (Layer.SetClassification): Switch
+         the classification instance variable to the new class
+         before calling _set_layer otherwise subscribers to a
+         LAYER_CHANGED event will not see any difference.
+         * test/test_classification.py: Fix tests of ClassGroupRange
+         so that they use the new signature.
+         * test/test_load.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_load_0_2.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_save.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+-07-01  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Fixes RTbug #1972, 1971.
+         Import used objects/class from color.
+         (generate_singletons): We don't
+         need the numGroups parameter anymore because we are using
+         the new ramps with GetProperties().
+         (generate_uniform_distribution): Use new ramp method
+         GetProperties().
+         (generate_quantiles, GenQuantiles0): Use new ramp method
+         GetProperties().
+         (CustomRamp.SetNumGroups): Removed. The ramps now map
+         a value from 0 to 1 to class properties so the number
+         of groups is not needed ahead of time.
+         (CustomRamp.next): Removed. CustomRamp does not support
+         interation anymore.
+         (CustomRamp.GetProperties): Returns a ClassGroupProperties
+         object based on the index value from 0 to 1 that is
+         passed to it.
+         (GreyRamp, RedRamp, GreenRamp, BlueRamp, GreenToRedRamp):
+         Made into instances of Monochromatic class instread of
+         deriving from it.
+         (HotToCold.SetNumGroups): Removed. See CustomRamp.
+         (HotToCold.next): Removed. See CustomRamp.
+         * Thuban/Model/classification.py: Fixes RTbug #1973, 1971.
+         (Classification.SetField, Classification.SetFieldType):
+         Replaced with SetFieldInfo.
+         (Classification.SetFieldInfo): New. Does a better job of
+         what SetField and SetFieldType used to do by combining
+         their function since they should really always be done
+         at the same time.
+         (Classification.SetLayer): Renamed to _set_layer.
+         (Classification._set_layer): Should only be called from
+         Layer's SetClassification. This does not cause a recursive
+         call as SetLayer did because we know that Layer knows about
+         the classification.
+         * Thuban/Model/color.py: Fixes RTbug #1971.
+         (_Transparent): Renamed from Transparent so it doesn't
+         conflict with the module variable.
+         (Transparent, Black): Renamed from Color.Transparent,
+         Color.Black so they are not class variables.
+         * Thuban/Model/layer.py: Fixes RTbug #1971, 1973.
+         (Layer.Destroy): We don't need to call SetClassification
+         anymore to clear out the back reference in the classifcation
+         to the layer. It's better to set it to None using _set_layer,
+         and we won't be creating another clas object too.
+         (Layer.SetClassification): Classification._set_layer is not
+         recursive so remove all the locking variables. Also clean
+         up the code so that it remains unchanged if something fails.
+         * Thuban/Model/load.py: Fixes RTbug #1971.
+         (SessionLoader.start_classification): Call
+         Classification.SetFieldInfo().
+         * Thuban/Model/save.py: Removed import of Color which wasn't
+         being used.
+         * Thuban/UI/classgen.py: Fixes RTbug #1972.
+         (ClassGenDialog.__init__): Color ramps are now instances
+         already so we don't need to create any new objects.
+         (ClassGenDialog.OnOK): Check for numGroups is no longer
+         necessary because we never use it.
+         * Thuban/UI/classifier.py: Fixes RTbug #1971.
+         (Classifier.__BuildClassification, Classifier.__SetGridTable):
+         Call Classification.SetFieldInfo() instead of SetFieldType.
+         * Thuban/UI/renderer.py: Fixes RTbug #1971.
+         * Thuban/UI/view.py: Fixes RTbug #1974, 1971.
+         (MapCanvas.__init__): Subscribe to the idle time event. Set
+         background color to white.
+         (MapCanvas.OnPaint): Set a flag indicating that we should
+         render the map during idle time. If we already have a bitmap
+         just draw it now.
+         (MapCanvas.OnIdle): New. Render the map only during idle time.
+         This also fixes a problem with the busy cursor under gtk.
+         * test/test_classgen.py (ClassGenTest.test_generate_singletons):
+         Fix calls to generate_singletons because the signature changed.
+         * test/test_classification.py: Fix color references and
+         change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+         * test/test_load.py: Fix color references.
+         * test/test_load_0_2.py: Fix color references.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer):
+         Change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+-07-01  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         New. Test join of two tables with partly equal column names.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create):
+         If duplicates in left and right tables column names are found,
+         append '_' (underscores) to the name until it is unique.
+         Create always new internal names for the resulting table and reference
+         columns in the join statement with <table>.<column>
+-07-01  Bernhard Herzog  <[email protected]>
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         New. Test whether joining on columns with the same names in both
+         tables works.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create): Make
+         sure to use the right internal names even when joining on field
+         with the same names in both tables. Also, detect duplicate names
+         in the joined table correctly.
+-07-01  Frank Koormann   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Reverse List of layers to render in same order as in desktop legend.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py (make_tuple): Takes a version string
+         and splits it into a tuple of at most three integers.
+         Used make_tuple() to make tuple versions of the version
+         numbers.
+         * Thuban/UI/about.py: Add Thuban email addresses.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: SQLite/PySQLite version dependencies
+         were too high.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: Update version to 0.8.1
+         * MANIFEST.in: Added Projections so that default.proj is
+         included.
+-06-26  Jonathan Coles   <[email protected]>
+         New About box with lots more information including library
+         versions and credits. More/better version checking before
+         Thuban starts.
+         * Thuban/UI/about.py: New. New About box that displays
+         library version information and credits.
+         * Thuban/version.py: Added new 'versions' dictionary which
+         contains the verions of various libraries which are checked
+         when the module loads.
+         (verify_versions): Check all version numbers and returns
+         a list of errors.
+         * Thuban/UI/classifier.py (Classifier.__EnableButtons):
+         Reset the status of the buttons as the situation warrants,
+         but in a better more reliable way by not relying on the
+         current status to determine what needs to change.
+         * Thuban/UI/main.py (wxCHECK_VERSION): Removed. Not needed.
+         (verify_versions): Remove most of the code since it is
+         now in Thuban.version.verify_versions.o
+         * Thuban/UI/mainwindow.py (MainWindow.About): Call new
+         About box in Thuban.UI.about.
+         * extensions/thuban/gdalwarp.cpp (get_gdal_version): New.
+         Returns the version of gdal library being used as a string.
+         * extensions/thuban/wxproj.cpp (check_version, check_version_gtk):
+         Removed.
+         (get_proj_version): Return the version of PROJ that the file
+         was compiled with.
+         (get_gtk_version): Return th version of GTK that the file
+         was compiled with.
+-06-25  Jonathan Coles   <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.EditSymbol): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         (ClassGroupPropertiesCtrl.DoEdit): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         * Thuban/UI/resource.py: Cleaned up how we determine file
+         extensions.
+         (GetImageResource): Return an wxImage from our Resources.
+-06-24  Jonathan Coles   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Check that a layer has a classification before trying
+         to get it. Raster layers don't have classifications.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.py: Add Resources/XML to resource list.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.cfg: Fix copyright dates
+-06-23  Jonathan Coles   <[email protected]>
+         * MANIFEST.in: Update with Resources/XML
+         * setup.py: Don't include Locale resources yet as we don't
+         have any and it causes problems building the distribution
+         for Windows. Update version to 0.8.0.
+         * Doc/thuban.dtd: Removed since it is now in Resources/XML.
+         * Thuban/UI/mainwindow.py: Add blank line at the end because
+         file was not being read correctly building the Windows
+         distribution.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.About): Fix text.
+         * Thuban/version.py: Temporarily update longversion for
+         the 0.8 release so that it doesn't have the cvs revision.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/common.py (ThubanBeginBusyCursor): Call wxSafeYield
+         to make sure that we don't create reentrant possibilities with
+         wxYield.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxBeginBusyCursor()
+         directly to avoid the wxSafeYield() call which generates an
+         OnPaint event causing infinite recursion. Don't try to catch
+         exception anymore. This was for before there were limits on map
+         scaling.
+-06-23  Bernhard Herzog  <[email protected]>
+         Bug fix for RT #1961:
+         * Thuban/Model/load.py (SessionLoader.start_derivedshapesource):
+         Register DerivedShapestores with the session
+         * Thuban/Model/session.py (Session.Tables): Make sure each table
+         is only listed once.
+         * test/test_load.py (TestJoinedTable.test): Add check_format call.
+         Update file contents to match the one written out.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/xmlsupport.py (SaxEventLister.startElementNS)
+         (SaxEventLister.endElementNS): Do not include the qname. Python
+.2.1 and 2.2.2 and 2.2.3 differ in this regard. In 2.2.1 qname it
+         is (presumably incorrectly) None, whereas it's a string with the
+         element name in the later versions.
+         * test/test_xmlsupport.py (TestEventList.test_even_list_simple)
+         (TestEventList.test_even_list_namespace): Update tests to reflect
+         the new behaviour
+         (TestEventList.test_even_list_id_normalization): Fix doc-string
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/layer.py (BaseLayer.HasShapes): New. Overridden
+         by deriving classes to determine if that layer supports shapes.
+         (Layer): Override HasShapes and return true.
+         * Thuban/UI/classgen.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (GenUniquePanel._OnRetrieve): Set busy cursor while retrieving
+         table data.
+         * Thuban/UI/common.py (ThubanBeginBusyCursor, ThubanEndBusyCursor):
+         New. Wrappers around the wxWindows functions that allow us to
+         make additional calls such as wxYield which gives the native
+         system a chance to update the cursor correctly.
+         * Thuban/UI/tableview.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         * Thuban/UI/view.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (MapCanvas.find_shape_at): Check if the current search layer
+         support shapes, otherwise go on to the next layer.
+         * test/test_layer.py: Add tests in each type of layer for
+         HasClassification() and HasShapes()
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxYield after
+         turning on the busy cursor to allow the system to change the
+         cursor before we begin painting. This fixes a problem that
+         was occuring only under GTK. Fixes RTbug #1840.
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.8.dtd: New DTD for the new file format
+         version.
+         * Thuban/Model/save.py (sort_data_stores): New. Make topological
+         sort of the data sources so they can be written with sources that
+         data sources that depend on other data sources come after the
+         sources they depend on.
+         (SessionSaver.__init__): Add idmap instance variable to map from
+         objects to the ids used in the file.
+         (SessionSaver.get_id, SessionSaver.define_id)
+         (SessionSaver.has_id): New. Methods to manage the idmap
+         (SessionSaver.write): Use thuban-0.8.dtd
+         (SessionSaver.write_session): Add a namespace on the session and
+         write out the data sources before the maps.
+         (SessionSaver.write_data_containers): New. Write the data
+         containers.
+         (SessionSaver.write_layer): Layer elements now refer to a
+         shapestore and don't contain filenames anymore.
+         * Thuban/Model/load.py (LoadError): Exception class to raise when
+         errors in the files are discovered
+         (SessionLoader.__init__): Define dispatchers for elements with a
+         thuban-0.8 namespace too.
+         (SessionLoader.check_attrs): New helper method to check and
+         convert attributes
+         (AttrDesc): New. Helper class for SessionLoader.check_attrs
+         (SessionLoader.start_fileshapesource)
+         (SessionLoader.start_derivedshapesource)
+         (SessionLoader.start_filetable, SessionLoader.start_jointable):
+         Handlers for the new elements in the new fileformat
+         (SessionLoader.start_layer): Handle the shapestore attribute in
+         addition to filename.
+         (SessionLoader.start_table, SessionLoader.end_table): Removed.
+         They were never used in the old formats and aren't needed for the
+         new.
+         * Thuban/Model/session.py (Session.DataContainers): New method to
+         return all "data containers", i.e. shapestores and tables
+         * test/xmlsupport.py (SaxEventLister.__init__)
+         (SaxEventLister.startElementNS, sax_eventlist): Add support to
+         normalize IDs.
+         * test/test_xmlsupport.py
+         (TestEventList.test_even_list_id_normalization): New test case for
+         id normalization
+         * test/test_load.py (LoadSessionTest.check_format): Use ID
+         normalization
+         (LoadSessionTest.thubanids, LoadSessionTest.thubanidrefs): New
+         class atrributes used for ID normalization
+         (TestSingleLayer, TestLayerVisibility, TestLabels.test)
+         (TestLayerProjection.test, TestRasterLayer.test): Adapt to new
+         file format
+         (TestJoinedTable): New test for loading sessions with joined
+         tables.
+         (TestLoadError): New. Test whether missing required attributes
+         cause a LoadError.
+         * test/test_save.py (SaveSessionTest.thubanids)
+         (SaveSessionTest.thubanidrefs): New class attributes for ID
+         normalization in .thuban files.
+         (SaveSessionTest.compare_xml): Use id-normalization.
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Adapt to new file format.
+         (SaveSessionTest.testLayerProjection): The filename used was the
+         same as for testSingleLayer. Use a different one.
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): New test cases for saving the
+         new data sources structures.
+         (TestStoreSort, MockDataStore): Classes to test the sorting of the
+         data stores for writing.
+         * test/runtests.py: Add CVS keywords
+-06-20  Jonathan Coles   <[email protected]>
+         * test/test_session.py
+         (UnreferencedTablesTests.test_unreferenced_tables_with_joins):
+         Use the cultural_landmark-point.dbf file for the store so that
+         the table rows and shape count match.
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.__init__): Raise
+         an exception if the number of shapes is different from the
+         number of rows in the table. Address RTbug #1933.
+         * test/test_layer.py (TestLayer.test_derived_store): Add
+         a test for the new exception in DerivedShapeStore.__init__.
+         * test/support.py (FloatTestCase): Removed since there is
+         already FloatComparisonMixin. Fixes RTbug #1954.
+         (FloatComparisonMixin.assertFloatEqual): Include test for
+         infinity that was part of FloatTestCase.
+         * test/test_range.py (RangeTest): Inherit from
+         support.FloatComparisonMixin now that we don't have
+         support.FloatTestCase.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_save.py (SaxEventLister, sax_eventlist): Removed. Use
+         the implementation in xmlsupport instead.
+         (SaveSessionTest.compare_xml): sax_eventlist is now in xmlsupport
+         * test/test_proj.py: Import sax_eventlist from xmlsupport instead
+         of test_save
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (LoadSessionTest.check_format): New helper
+         method to make sure the test files we load might have been written
+         by the current thuban version.
+         (ClassificationTest.TestLayers, TestSingleLayer.test)
+         (TestLayerVisibility.test, TestClassification.test)
+         (TestLabels.test, TestLayerProjection.test, TestRasterLayer.test):
+         Add check_format() calls and fix the thuban data to match the data
+         that would be written by saving the session loaded from it.
+         * test/xmlsupport.py (SaxEventLister, sax_eventlist): Copies of
+         the same class and function in test_save.
+         * test/test_xmlsupport.py (TestEventList): New. test cases for
+         sax_eventlist
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban.dtd: Add comment about which versions of
+         Thuban are covered by this DTD
+         (map): Fix content model for layers and raster layers. There can
+         be any number or layers and raster layers in any order.
+-06-20  Jonathan Coles   <[email protected]>
+         This is mainly about fixing RTbug #1949.
+         * Thuban/Model/classification.py: Remove "from __future__"
+         import statement since python 2.2 is the earliest supported
+         version.
+         * Thuban/Model/proj.py (Projection.GetProjectedUnits): New.
+         Currently returns PROJ_UNITS_METERS or PROJ_UNITS_DEGREES
+         depending on the units this projection *forwards* into.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Remove unnecessary use of lambdas and nested functions.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Do scale
+         adjustment here if the map projection uses degrees.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Remove
+         scale adjust code since it is now done before calling
+         this method. Don't do anything if the map projection
+         is None.
+-06-19  Bernhard Herzog  <[email protected]>
+         Move version specific load tests to their own file.
+         * test/test_load.py: Expand the doc-string to explain a bit how to
+         handle file format changes.
+         (TestClassification.test): Update the docstring as this test is
+         not about Thuban 0.2 anymore.
+         * test/test_load_0_2.py: New file with the load tests for thuban
+         files created with Thuban 0.2 and earlier.
+-06-19  Bernhard Herzog  <[email protected]>
+         Add XML validation to some of the tests. Validation will only be
+         done if pyRXP is installed (http://reportlab.com/xml/pyrxp.html).
+         To make the DTD available to the test cases it's moved into
+         Resources/XML
+         * Resources/XML/thuban.dtd: New. This is now the real Thuban DTD
+         for versions up to and including 0.2. Two slight changes: added an
+         encoding specification and fixed the comment which refered to
+         GRASS, not Thuban
+         * test/xmlsupport.py: New support module for tests involving XML.
+         Currently there's a mix-in class for XML validation.
+         * test/test_xmlsupport.py: New. Tests for the xmlsupport module
+         * test/test_save.py (SaveSessionTest): Derive from ValidationTest
+         so that we can validate the
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Validate the generated XML
+         * test/runtests.py (main): Call print_additional_summary instead
+         of print_garbage_information
+         * test/support.py (resource_dir): New function to return the
+         "Resource" subdirectory
+         (print_additional_summary): New function to combine several
+         summary functions
+         (run_tests): Use print_additional_summary instead of calling
+         print_garbage_information directly
+-06-19  Bernhard Herzog  <[email protected]>
+         * Doc/thuban.dtd (classification): Correct the content model of
+         the classification element.
+         (projection): Add the "name" attribute
+-06-19  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Apply conversion to
+         scale if projection is latlong to get better estimate.
+         Fix problem of hidden properties dialog under windows after double
+         click on layer tree:
+         The tree control always gets an Expanded / Collapsed event after
+         the ItemActivated  on double click, which raises the main window again.         We add a second ItemActivated event to the queue, which simply
+         raises the already displayed window.
+         * Thuban/UI/legend.py (LegendTree.__init__): Instance variable
+         raiseProperties initialized to prevent endless loops
+         (LegendTree._OnItemActivated): Depending on self.raiseProperties
+         simply raise the properties or open the dialog and issue a second
+         event.
+-06-18  Jonathan Coles   <[email protected]>
+         * setup.py: Fix a few problems that occured under Windows.
+-06-18  Jonathan Coles   <[email protected]>
+         When Thuban loaded the map was redrawn twice because the
+         legend was being opened after the mainwindow was created
+         and not during its creation. This meant the map was drawn
+         initially and then had to be redrawn when the legend
+         caused the display to change. Now the legend is opened
+         in the mainwindow constructor which resolves this issue.
+         Also, although we were checking for the existence of
+         gdal and gdalwarp modules, the gdalwarp extension was
+         still being compiled (which may fail if the system doesn't
+         have gdal installed). the build_ext command to setup.py
+         now accepts the flags --with-gdal and --without-gdal.
+         If --without-gdal is specified setup.py will try to
+         use the gdal parameters specified by gdal-config. Under
+         windows, those parameters have to be set in setup.py
+         as with proj4 an wxWindows.
+         * setup.py: Use a list instead of seperate variables for
+         extension parameters so we can create a generic function
+         that runs an appropriate *-config script.
+         (run_cs_script): Renamed from run_wx_script and modified
+         to accept a second argument which is a list of lists to
+         be filled in by the values returned from running the command.
+         (thuban_build_ext): New. Extends the build_ext command and
+         provides the options --with-gdal/--without-gdal which then
+         optionally includes the gdalwarp extension.
+         * Thuban/Model/resource.py: First check if we can import
+         the gdalwarp Thuban extension before checking for gdal.
+         Also added some comments.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Check if
+         the map is None which may be the case if none has been loaded
+         yet.
+         * Thuban/UI/main.py (main): Remove call to ShowLegend.
+         * Thuban/UI/mainwindow.py (MainWindow.__init__): Call ShowLegend().
+         * Thuban/UI/renderer.py: Check for gdal support before importing
+         gdalwarp.
+         (MapRenderer.render_map): Only try to optimize if we have gdal
+         support otherwise nothing will get drawn.
+         * Thuban/UI/view.py (MapCanvas.FitMapToWindow): This may be called
+         during startup before a map has been created. Check if map is None
+         before using it and do nothing if it is.
+-06-17  Jonathan Coles   <[email protected]>
+         Fix the problem with raster layers under Windows that caused
+         Thuban to crash. The view should respond to layer projection
+         changed events to update the display. Changes to a projection
+         should not cause the map to be set to full extent.
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         current_map_proj to remember the current map projection so that
+         when the projection changes we know what the previous projection
+         was.
+         (MapCanvas.SetMap): Unsubscribe and subscribe to
+         LAYER_PROJECTION_CHANGED events.
+         (MapCanvas.projection_changed): Split into two methods that respond
+         to map and layer projection changes.
+         (MapCanvas.map_projection_changed): New. Takes the current view and
+         projects it using the new projection. This does not cause the
+         map to be redrawn at full extent.
+         (MapCanvas.layer_projection_changed): New. Cause a redraw which
+         will draw each layer in its new projection.
+         * extensions/thuban/bmpdataset.cpp (BMPDataset::Open): Call
+         VSIFClose() not VSIFCloseL() to close the file. Fixes a crash
+         under Windows.
+         * extensions/thuban/gdalwarp.cpp (MFILENAME): Padding should be
+         to twice sizeof(void*) because there are two digits for each
+         hex byte.
+-06-16  Bernhard Herzog  <[email protected]>
+         Update to the layer interface: Direct access to the table,
+         shapetable, shapefile and filename attributes is now actively
+         deprecated by issuing deprecation warnings for all places where
+         this happens.
+         * Thuban/Model/layer.py (Layer.__getattr__): New. Implement access
+         to the instance variables table, shapetable, shapefile and
+         filename via __getattr__ so that we can issue a deprecation
+         warning.
+         (Layer.SetShapeStore): Don't set the deprecated instance variables
+         any more
+         (Layer.SetShapeStore): Don't use deprecated layer instance
+         variables
+         (Layer.Destroy): No need to explicitly remove the instance
+         variables any more
+         (Layer.GetFieldType, Layer.Shape): Don't use deprecated layer
+         instance variables
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__)
+         (GenUniformPanel._OnRetrieve, GenUniquePanel._OnRetrieve)
+         (GenQuantilesPanel.GetList, GenQuantilesPanel.OnRetrieve): Don't
+         use deprecated layer instance variables
+         * Thuban/UI/classifier.py (Classifier.__init__): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/identifyview.py (IdentifyListCtrl.selected_shape)
+         (IdentifyGridCtrl.selected_shape): Don't set the deprecated layer
+         instance variables
+         * Thuban/UI/tableview.py (LayerTableGrid.select_shapes): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Don't use
+         deprecated layer instance variables
+         * Thuban/Model/save.py (SessionSaver.write_layer): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer)
+         (MapRenderer.polygon_render_param): Don't use deprecated layer instance
+         variables
+         * test/runtests.py (main): Turn Thuban's deprecation warnings into
+         errors so that they're cought by the tests
+         * test/test_load.py (TestSingleLayer.test): Don't use deprecated
+         layer instance variables
+-06-16  Jonathan Coles   <[email protected]>
+         Fix a problem under Windows whereby if the user double-clicks on a
+         layer in the legend that tree item will expand or collapse as well
+         as open the layer properties dialog. The state of the tree item
+         should not be affected.
+         * Thuban/UI/legend.py (LegendTree.__init__): Add instance variable
+         preventExpandCollapse and subscribe to expanding and collapsing
+         events.
+         (LegendTree.OnItemExpandCollapse): New. Responds to expanding and
+         collapsing events and will veto the event if it has been triggered
+         by the user double clicking on a layer.
+         (LegendTree._OnItemActivated): Set preventExpandCollapse to indicate
+         that an expanding/collapsing event should be vetoed.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.OnClose)
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): Unsubscribe the messages
+         in OnClose and not in map_layers_removed or
+         layer_shapestore_replaced to make sure it always happens when the
+         dialog is closed
+-06-13  Jonathan Coles   <[email protected]>
+         This puts back a fix for Windows where a panel is needed so that
+         the background of the table view appears correctly.
+         * Thuban/UI/tableview.py (TableFrame.__init__): Add a panel
+         object that can be used by derived classes to place any
+         controls (including the grid) onto.
+         (QueryTableFrame.__init__): Use the panel as the parent window
+         for all the controls. Reparent the grid so that the panel is
+         the parent. Call UpdateStatusText() to correctly initialize
+         the status bar.
+-06-13  Jonathan Coles   <[email protected]>
+         * Thuban/UI/dialogs.py (ThubanFrame): New: a class that inherits
+         from wxFrame (as opposed to wxDialog like the other classes)
+         but otherwise behaves like the other classes. This is needed
+         for the TableView which isn't really a dialog and needs to
+         have a status bar and control buttons.
+         * Thuban/UI/tableview.py (TableGrid.__init__): Create an
+         instance variable to keep track of how many rows are selected.
+         Subscribe once to the the events we are interested in.
+         (ThubanGrid.OnRangeSelect): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.OnSelectCell): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.ToggleEventListeners): Rather than subscribe None
+         as an event listener (which changes the event handler stack)
+         simply set an instance variable to False. This is checked in
+         the event handlers.
+         (ThubanGrid.GetNumberSelected): Return the number of currently
+         selected rows.
+         (TableFrame): Inherit from ThubanFrame so we can have a
+         status bar and control buttons.
+         (QueryTableFrame.__init__): Create a status bar. Fixes RTbug #1942.
+         Explicitly set which items are selected in the operator choice and
+         action choice so there is always a valid selection. Fixes RTbug #1941.
+         Subscribe to grid cell selection events so we can update the
+         status bar.
+         (QueryTableFrame.UpdateStatusText): Update the status bar with
+         how many rows are in the grid, how many columns, and how many
+         rows are selected.
+         (QueryTableFrame.OnGridSelectRange, QueryTableFrame.OnGridSelectCell):
+         Call UpdateStatusText when cells are (de)selected.
+         (QueryTableFrame.OnQuery): Use the string value in the value
+         combo if either the selected item index is 0 or if the string
+         cannot be found in the predefined list (this happens if the
+         user changes the text). Fixes RTbug #1940.
+         Only turn off the grid event listeners if there a query comes
+         back with a none empty list of ids. in the case that the list
+         is empty this causes a grid.ClearSelection() call to actually
+         clear the grid selection which causes the selected items in
+         the map to be deselected. Fixes RTbug #1939.
+         * test/test_save.py (XMLWriterTest.Encode): Check return values.
+         Fixes RTbug #1851.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__): Call
+         self.selected_shape with the current selection to make sure the
+         contents of the dialog are up to date when it's shown for the
+         first time.
+         The dialog used to work without this by luck. The recent fix to
+         the connector module 'broke' a 'feature' the identify view was
+         relying on, i.e that subscribing to a message in response to
+         receiving a message of that type would mean that the new
+         subscriber would also be called for the same message.
+-06-12  Jonathan Coles   <[email protected]>
+         * extensions/thuban/gdalwarp.cpp: Removed debug printing as
+         the image is rendered. Fixes RTbug #1937.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Lib/fileutil.py: As is done under Windows, create the
+         user directory if it doesn't exist on a posix system.
+         Fixes RTbug #1815.
+         * Thuban/Model/resource.py (get_user_proj_files): Moved the
+         called to get_application_dir here, so that the directory
+         will only be called if this method is invoked.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Clear
+         the projfilepath if no projection is selected.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Don't draw
+         the scalebar if the current map has no projection set.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Set the
+         projfilepath label to just the basename of the projection file
+         rather than include the entire path.
+         * Thuban/Model/resource.py: Fix missed proj functions that
+         needed to be renamed.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classification.py: Removed assert statements that
+         tested if the variable was an instance of Color.
+         * Thuban/Model/color.py (Color): Remove commented code that isn't
+         used.
+         (Transparent): Renamed from NoColor. Doesn't inherit from Color.
+         Fixes RTbug #1835.
+         (Transparent.__eq__, Transparent.__ne, Transparent.__repr): New.
+         Needed now that the class doesn't inherit from Color.
+-06-12  Jonathan Coles   <[email protected]>
+         * test/test_save.py (XMLWriterTest.testEncode): Explicitly
+         check unicode strings.
+         * test/test_layer.py: Check for existence of gdal.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/xmlreader.py: New. Contains the XMLReader class
+         that was in load.py
+         * Thuban/Model/xmlwriter.py: New. Contains the XMLWriter class
+         that was in save.py
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+         * Thuban/Model/save.py (escape, XMLWriter): Moved into seperate
+         file xmlwriter.py.
+         * Thuban/Model/resource.py: Renamed functions to following the
+         function_names_with_underscores style.
+         (has_gdal_support): New function that returns true if the gdal
+         library is available. Addresses RTbug #1877.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession):
+         Display a message box if the gdal library is not available, but
+         only if there are any layers that would use it. Addresses RTbug #1877.
+         * Thuban/UI/classgen.py: Use renamed projection resource functions.
+         (GenUniformPanel.__CalcStepping): Fix a slight discrepency
+         when using integers versus floats.
+         * Thuban/UI/mainwindow.py (_has_gdal_support): New. Used to
+         determine if the "Add Image Layer" menu option should be
+         greyed out or not. Addresses RTbug #1877.
+         * Thuban/UI/projdialog.py: Use renamed projection resource functions.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Only try to
+         optimize if a raster layer is visible. Fixes RTbug #1931.
+         Only draw the raster layer if the gdal library is available.
+         Addresses RTbug #1877.
+         * test/test_classgen.py: Add tests for generate_singletons,
+         generate_uniform_distribution, generate_quantiles. Fixes RTbug #1903.
+         (test_calculate_quantiles): Fix some tests to catch the new
+         ValueError that is raised.
+         * test/test_proj.py: Use renamed projection resource functions.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): New
+         test for saving classified layers. Fixes RTbug #1902.
+         (XMLWriterTest): New. Tests the XMLWriter class. Fixes RTbug #1851.
+-06-12  Jan-Oliver Wagner <[email protected]>
+         Fix for http://intevation.de/rt/webrt?serial_num=1900.
+         * Thuban/UI/multiplechoicedialog.py: New. A multiple choice dialog.
+         * Thuban/UI/mainwindow.py: import wxMultipleChoiceDialog from
+         multiplechoicedialog.py rather than from the wxPython library.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): Minor stability
+         update.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): New function to
+         determine the absolute .thuban/thuban directory under
+         "posix" (os.expanduser) and "nt" (read AppData registry key).
+         * Thuban/Model/resource.py: Use get_application_dir
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Use get_application_dir.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Subscribe to
+         the messages MAP_LAYERS_REMOVED messages
+         (LayerTableFrame.OnClose): Unsubscribe from it.
+         (LayerTableFrame.map_layers_removed): New. Receiver for
+         MAP_LAYERS_REMOVED. Close the dialog when the layer whose the
+         dialog is showing is removed.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (Connector.Issue): Iterate over a copy
+         of the receivers list so that unsubscribing in a receiver doesn't
+         modify it while iterating over it.
+         * test/test_connector.py
+         (ConnectorTest.test_disconnect_in_receiver): New. Test whether
+         unsubscribing in a receiver works correctly. See docstring for
+         details
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (LAYER_SHAPESTORE_REPLACED): New
+         message.
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Send
+         LAYER_SHAPESTORE_REPLACED when the shapestore changes. A
+         LAYER_CHANGED will still be sent if the classification changes.
+         * Thuban/UI/classifier.py (Classifier.__init__): Add the map as
+         parameter so we can subscribe to some of its messages
+         (Classifier.__init__): Subscribe to the map's MAP_LAYERS_REMOVED
+         and the layer's LAYER_SHAPESTORE_REPLACED
+         (Classifier.unsubscribe_messages): New. Unsubscribe from message
+         subscribed to in __init__
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): receivers for the messages
+         subscribed to in __init__. Unsubscribe and close the dialog
+         * Thuban/UI/mainwindow.py (MainWindow.OpenLayerProperties): Pass
+         the map to the Classifier dialog
+         * test/test_layer.py (SetShapeStoreTests): Derive from
+         SubscriberMixin as well so we can test messages
+         (SetShapeStoreTests.setUp): Subscribe to some of the layer's
+         messages
+         (SetShapeStoreTests.tearDown): Clear the messages again
+         (SetShapeStoreTests.test_sanity): Expand the doc-string and check
+         for the modified flag too
+         (SetShapeStoreTests.test_set_shape_store_modified_flag): New test
+         to check whether SetShapeStore sets the modified flag
+         (SetShapeStoreTests.test_set_shape_store_different_field_name)
+         (SetShapeStoreTests.test_set_shape_store_same_field)
+         (SetShapeStoreTests.test_set_shape_store_same_field_different_type):
+         Add tests for the messages. This checks both the new
+         LAYER_SHAPESTORE_REPLACED and the older LAYER_CHANGED
+-06-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py: Improved and partly added help texts for
+         the menu items.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Layout reimplemented without panel. Make life easier to fit the list
+         in the dialog.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Fill the projchoice
+         once on initialisation (Former implementation resulted in multiple
+         entries for each projection).
+         (ProjFrame.__FillAvailList): selectProj as second optional parameter,
+         if set, select the projection found under the specified name. This
+         overwrites any other selection estimate.
+         Removed projchoice filling from this method.
+         (ProjFrame._OnSave, ProjFrame._OnAddToList):
+         Updated call of ProjFrame.__FillAvailList
+         (LCCPanel._DoLayout): Moved parameter controls in more common order.
+         * Resources/Projections/defaults.proj: Extended defaults representing
+         various common European projections.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Use ListCtrl instead of GridCtrl
+         * Thuban/Model/resource.py:
+         Guess location of .thuban directory from tempdir parent directory.
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Guess location of .thuban directory from tempdir parent directory.
+-06-04  Bernhard Herzog  <[email protected]>
+         Do not cache the values returned by the tree widget's
+         GetFirstChild and GetNextChild methods because it led to lots of
+         segfaults. The new way requires more brute force but is more
+         reliable.
+         * Thuban/UI/legend.py (LegendTree.__init__): Remove instance
+         variable layer2id
+         (LegendTree.find_layer): New method to do with brute force what
+         layer2id tried to accomplish
+         (LegendTree._OnMsgLayerChanged)
+         (LegendTree._OnMsgLayerTitleChanged, LegendTree.__ShowHideLayer):
+         Use find_layer instead of layer2id
+         (LegendTree.__RemoveLayer, LegendTree.__AddLayer): No need to
+         update layer2id anymore
+         (LegendTree._OnMsgMapLayersRemoved)
+         (LegendTree._OnMsgMapLayersAdded): Get by without layer2id.
+-06-03  Thomas Koester  <[email protected]>
+         * Thuban/Model/classgen.py (GenQuantiles0): New function.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (layer_rename command, table_rename command):
+         New commands.
+         (main_menu): Add the new commands.
+         (MainWindow.TableRename): New. Implementation of the table_rename
+         command.
+         (MainWindow.RenameLayer): New. Implementation of the layer_rename
+         command.
+         * Thuban/Model/session.py (Session.AddTable): call self.changed to
+         set the modified flag
+         * test/test_session.py (TestSessionSimple.test_add_table): Test
+         whether the modified flag is set properly
+         * Thuban/Model/base.py (TitledObject.SetTitle): Call changed
+         instead of issue so that the modified flags get updated.
+         * test/test_base.py (SomeTitledObject): Derive from Modifiable
+         instead of Publisher to reflect reality better and to accomodate
+         the fact that SetTitle now calls changed instead of issue
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.GetList): Resource
+         acquisition has to happen before the try in a try-finally.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree._OnMsgMapLayersRemoved): It's
+         possible that a layer is removed that is not currently selected in
+         the legend so don't check for this.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.Destroy): Set all instance
+         variables to None that have direct or indirect references to
+         shapefiles or dbf files to make sure that they do go away and the
+         files are closed.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.GetRootItem): Reset
+         availImgListIndices when a new image list is created
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.__init__): New instance variable
+         changing_selection to indicate whether the LegendTree code itself
+         is currently changing the selection
+         (LegendTree.normalize_selection): New method to normalize the
+         selection by selecting the layer item even if the user clicked on
+         the classification.
+         (LegendTree._OnSelChanged): normalize the selection. This works
+         around a bug in wx which doesn't keep track of the selection
+         properly when subtrees are deleted.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.set_view_transform): Limit the
+         maximum and minimum scale factors.
+         * test/test_classgen.py (ClassGenTest.test): Update to reflect the
+         changes in classgen.py
+-05-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Remove ClassGenerator class but make
+         all the methods functions. Fixes RTBug #1903.
+         * Thuban/Model/map.py (Map.TopLayer, Map.BottomLayer): Renamed
+         to MoveLayerToTop and MoveLayerToBottom respectively. Fixes
+         RTBug #1907.
+         * Thuban/UI/classgen.py: Use classgen functions that were part
+         of the ClassGenerator class. Put try/finally blocks around
+         code that uses wxBeginBusyCursor()/wxEndBusyCursor(). Fixes
+         RTBug #1904.
+         * Thuban/UI/classifier.py: Remove unused import of ClassGenerator.
+         * Thuban/UI/legend.py: The legend was cleared and repopulated any
+         time something changed which caused some state to be lost such
+         as which children were expanded or collapsed. Fixes RTBug #1901.
+         (LegendTree._OnMsgMapLayersAdded): Add only new layers.
+         (LegendTree.__OnMsgMapLayersRemoved): Remove layers that exist in
+         the legend but not in the map.
+         (LegendTree.__FillTree): Move main functionality out into smaller
+         methods that can be used by other methods.
+         (LegendTree.__FillTreeLayer): Reuse old slots in the image list
+         if they are available.
+         (LegendTree.DeleteAllItems): Renamed from __DeleteAllItems so
+         that we override the wxTreeCtrl method. Iterate over children
+         and call __RemoveLayer.
+         (LegendTree.__AddLayer): New. Add a new layer to the legend.
+         (LegendTree.__RemoveLayer): Remove a layer from the legend.
+         (LegendTree.DeleteChildren): New, overrides wxTreeCtrl method.
+         Should only be called with the id of a layer branch.
+         (LegendTree.GetRootItem): New, overrides wxTreeCtrl method.
+         Returns the root item or creates one if necessary.
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_layer): Call
+         ProjectRasterFile with tuple arguments instead of strings.
+         * Thuban/UI/tableview.py (QueryTableFrame.OnQuery): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         (MapCanvas.FitSelectedToWindow): If a single point is selected
+         simply center it on the display. Fixes RTBug #1849.
+         * extensions/thuban/gdalwarp.cpp: Removed code that allowed gdalwarp
+         to be compiled as a standalone app. Now the code can only be
+         called from Python which simplifies the parameter passing.
+         (ProjectRasterFile): Handle Python arguments. Remove code that
+         checks for a destination dataset. Add more clean up code.
+         * test/test_map.py (TestMapWithContents.test_raise_layer_top,
+         TestMapWithContents.test_lower_layer_bottom):
+         Test Map.MoveLayerToTop() and Map.MoveLayerToBottom() respectively.
+         Fixes RTBug #1907.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Apply a full
+         extent to the map when the legend is toggled. Fixes RTBug #1881.
+-05-29  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.OnClose): Bug-fix: Now
+         unsubscribes all that is subcribed in __init__.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.DuplicateLayer)
+         (MainWindow.CanDuplicateLayer): New methods to implement the
+         Layer/Duplicate command.
+         (layer_duplicate command): New.
+         (main_menu): Add layer_duplicate to the Layer menu.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (NullRenderer.Draw): New. Our own
+         renderer so that NULL/None values get displayed differently (by a
+         gray rectangle).
+         (TableGrid.__init__): Override the default renderers
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Set the
+         classification to "None" if the type of the field has changed.
+         * test/test_layer.py (SetShapeStoreTests): New. Class with a few
+         test for the Layer.SetShapeStore method
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/layer.py (Layer.TreeInfo): Fixed a bug (a layer
+         does not necessarily have a filename).
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableClose, MainWindow.TableShow):
+         sort the selection list for the dialog.
+-05-28  Frank Koormann  <[email protected]>
+         * extensions/thuban/wxproj.cpp
+         (project_point): Removed cast to int for projected point coordinates.
+         (shape_centroid): Return last point if all polygon vertices fall
+         to one point.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (_can_unjoin): Add doc-string and cope
+         with layers that don't have shapestores, i.e. raster layers.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (DBFTable.__init__): Omit the extension
+         when determining the title from the filename.
+         * test/test_dbf_table.py (TestDBFTable.test_title): Update to
+         reflect changes in the way the title is derived from the filename
+-05-28  Frank Koormann  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow):
+         Added wxDEFAULT_DIALOG_STYLE to show table dialog styles.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages): Also
+         delegate SelectedLayer.
+         (MainWindow.LayerUnjoinTable): Implement.
+         (_can_unjoin): New. Helper function for the sensitivity of the
+         layer/unjoin command.
+         * Thuban/Model/data.py (ShapefileStore.OrigShapeStore)
+         (DerivedShapeStore.OrigShapeStore): New. Return the original
+         shapestore. Used to figure out how to unjoin.
+         (DerivedShapeStore.Shapefile): Fix a typo.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog): Extend to handle layer joins as
+         well
+         (JoinDialog.__init__): Use the layer parameter and only build the
+         left choice when a layer is given
+         (JoinDialog.OnJoin): Handle layer joins as well
+         (JoinDialog.OnLeftTable, JoinDialog.OnRightTable): Handle the case
+         that the user selects the "Select..." item. The sensitivitly
+         updating is now in update_sensitivity
+         (JoinDialog.y): New method to refactor the sensitivity update of
+         the join button into its own method.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerJoinTable): Implement.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (table_close command): Make it sensitive
+         iff there are unreferenced tables in the session
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (TABLE_REMOVED): New message.
+         * Thuban/Model/session.py (Session.UnreferencedTables): New method
+         to return tables that are not referenced by other tables or shape
+         stores and can be removed.
+         (Session.RemoveTable): Issue a TABLE_REMOVED message after
+         removing the table
+         * Thuban/UI/mainwindow.py: Remove unused imports
+         (MainWindow.TableClose): Implement.
+         * Thuban/UI/tableview.py (TableFrame.__init__): Subscribe to some
+         messages so that the frame will be automatically closed when a new
+         session is opened or the table is removed.
+         (TableFrame.OnClose): Unsubscribe the Subscriptions made in
+         __init__
+         (TableFrame.close_on_session_replaced)
+         (TableFrame.close_on_table_removed): New. Subscribers that close
+         the window
+         * test/test_session.py (TestSessionMessages.test_remove_table)
+         (TestSessionSimple.test_remove_table): Move the test to
+         TestSessionSimple and add test for the TABLE_REMOVED message
+         (TestSessionBase.setUp): Also subscribe to TABLE_REMOVED
+         (TestSessionSimple.test_unreferenced_tables) New. Test for the
+         UnreferencedTables method.
+         (UnreferencedTablesTests): New. Class with some more sophisticated
+         tests for UnreferencedTables.
+-05-27  Frank Koormann  <[email protected]>
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): The "_S_election"
+         display has some unwanted side effects. Removed again.
+-05-27  Frank Koormann  <[email protected]>
+         * Resources/Bitmaps/legend_icon_layer.xpm: New, icon for legend.
+         * Thuban/UI/legend.py (LegendTree.__FillTree): Use "legend_icon_layer"
+-05-27  Jan-Oliver Wagner <[email protected]>
+         * test/test_menu.py (MenuTest.test): Added test for
+         Menu.RemoveItem().
+         * Thuban/UI/menu.py (Menu.RemoveItem): New. Remove an item from
+         the menu.
+-05-27  Frank Koormann  <[email protected]>
+         Nonmodal dialogs without parent (i.e. they can fall behind the main
+         window)
+         * Thuban/UI/mainwindow.py (MainWindow.OnClose): Explicitly destroy
+         all dialogs in the dialogs dictionary and the canvas.
+         * Thuban/UI/dialogs.py (NonModalNonParentDialog): New class, without
+         parent, i.e. can fall behind other windows.
+         (NonModalDialog.OnClose): Check is dialog is in mainwindow.dialog
+         dictionary before removing it.
+         * Thuban/UI/classifier.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/projdialog.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/tableview.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/tree.py: Dialog derived from NonModalNonParentDialog
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.ShowTableView): New. Open a
+         tableview dialog
+         (MainWindow.TableShow): Use ShowTableView to open the dialogs.
+         Also, don't use the table's titles as the dialog names. The titles
+         aren't guaranteed to be unique.
+         (MainWindow.TableOpen): Open a table view dialog after opening the
+         table
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py: Remove the Table/Hide menu item. Its
+         effect can be achieved by simply closing the window showing the
+         table.
+         (MainWindow.TableHide): Removed.
+         (main_menu): Removed "table_hide"
+-05-27  Frank Koormann  <[email protected]>
+         Fix legend tree display problems under Win32
+         * Thuban/UI/legend.py:  BMP_SIZE_W = 15
+         (LegendTree.__FillTree): Display "legend_icon_map.xpm" with layer title.
+         (LegendTree.__FillTreeLayer): Explicitely set SelectedImage.
+         * Resources/Bitmaps/legend_icon_map.xpm: New icon for legend.
+-05-27  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/menu.py (Menu.InsertSeparator): Additional optional parameter
+         'after' now allows to insert separators almost anywhere in the menu.
+-05-27  Frank Koormann  <[email protected]>
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): Underline the
+         "S" of selection box label to hint on hot key (Alt-S). Works under
+         Win32 but is ignored under GTK.
+-05-26  Frank Koormann  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__do_layout, ProjPanel._DoLayout):
+         Center Choices.
+-05-26  Bernhard Herzog  <[email protected]>
+         Remove the Precision methods again. They're too DBF specific to be
+         part of the table interface and they're only used in table_to_dbf
+         anyway.
+         * Thuban/Model/transientdb.py (TransientTableBase.Width):Use a
+         fixed precision of 12 for doubles.
+         (TransientTableBase.Precision): Removed
+         (AutoTransientTable.Width): Delegate to self.table.
+         * Thuban/Model/table.py (DBFTable.Precision)
+         (MemoryTable.Precision): Removed.
+         (MemoryTable.Width): Use a fixed precision of 12 for doubles.
+         (table_to_dbf): Use a fixed precision of 12 for floats unless the
+         column object specifies something else.
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): New.
+         test for table_to_dbf
+-05-26  Bernhard Herzog  <[email protected]>
+         * test/test_transientdb.py
+         (TestTransientTable.run_iceland_political_tests): Fix a comment.
+-05-26  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableOpen): Real
+         implementation. Mark parts of the file format strings for
+         localization.
+         * Thuban/Model/session.py (Session.OpenTableFile): New. Open a dbf
+         file and add the table to the tables managed by the session
+         * test/test_session.py (TestSessionSimple.test_open_table_file):
+         New. test case for OpenTableFile
+-05-26  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/controls.py, Thuban/UI/identifyview.py, Thuban/UI/join.py,
+         Thuban/UI/labeldialog.py, Thuban/UI/mainwindow.py,
+         Thuban/UI/proj4dialog.py, Thuban/UI/tableview.py, Thuban/UI/view.py:
+         Replace the true/false of wxWindows by True/False of Python 2.2.1.
+-05-26  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): If there is
+         already a selection present, update the grid accordingly.
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow): Make the dialog
+         resizeable and increase its initial size.
+-05-26  Frank Koormann  <[email protected]>
+         Table export functionality
+         * Thuban/Model/table.py (DBFTable.Width, MemoryTable.Width):
+         Return width (in characters) for a column.
+         (DBFTable.Precision, MemoryTable.Precision): Return decimal precision.
+         (table_to_dbf): Write table to dbf file.
+         (table_to_csv): Write table to csv file.
+         * Thuban/Model/transientdb.py (TransientTableBase.Width,
+         TransientTableBase.Precision): Return column width and precision.
+         * Thuban/UI/tableview.py (QueryTableFrame.OnSaveAs): Call table_to_dbf
+         or table_to_csv depending on file selection.
+         * test/test_dbf_table.py:
+         Test table_to_dbf (extension of former part of test).
+         * test/test_csv_table.py:
+         Test table_to_csv.
+-05-23  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Use _() for strings.
+         Use QueryTableFrame instead of TableFrame.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Prefix the
+         table window with 'Layer Table:' instead of 'Table:'.
+-05-23  Jan-Oliver Wagner <[email protected]>
+         Give all tables a title via mix-in TitledObject.LayerShowTable
+         * Thuban/Model/base.py (TitledObject.SetTitle): Call method 'issue'
+         only if it exists.
+         * Thuban/Model/table.py (DBFTable, MemoryTable): mix-in TitledObject
+         and call its init-method with a default title. Remove Title() method.
+         * Thuban/Model/transientdb.py (TransientTable, TransientJoinedTable,
+         AutoTransientTable): mix-in TitledObject and call its init-method with
+         a default title. Remove Title() method.
+-05-23  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.AddShapeStore): Define
+         AddShapeStore analogously to AddTable.
+         * test/test_session.py (TestSessionSimple.test_add_shapestore):
+         New. Test for AddShapeStore
+-05-23  Jan-Oliver Wagner <[email protected]>
+         Introducing QueryTableFrame and a very coarse ShowTable implementation.
+         * Thuban/UI/tableview.py (LayerTableFrame, QueryTableFrame): Split the
+         class LayerTableFrame into two classes, LayerTableFrame and QueryTableFrame.
+         The latter implements the selection GUI without dependency on a layer.
+         LayerTableFrame now is derived from QueryTableFrame and connects
+         to a layer.
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow): A very coarse
+         implementation that still needs work.
+         * Thuban/Model/layer.py (Layer.TreeInfo): Added filename.
+-05-22  Frank Koormann  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__init__):
+         Added "outer_join = False" as optional parameter.
+         (TransientJoinedTable.create): If outer join is true, perform a
+         "LEFT OUTER JOIN" instead of "JOIN", which preserves all records of
+         the left table. Records not matching are filled with 0 / None.
+         * Thuban/UI/join.py (JoinDialog.__init__): Checkbox for outer join.
+         (JoinDialog.OnJoin): Consider outer join check box.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Use exc_info in a
+         somewhat safer way. Storing the traceback in a local variable can
+         lead to memory leaks
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Make sure to really call
+         the wxMessageDialog's Destroy() method.
+-05-22  Frank Koormann  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Make use of
+         TransientTable.Title()
+-05-22  Frank Koormann  <[email protected]>
+         Join Dialog, initial version.
+         * Thuban/UI/mainwindow.py (MainWindow.TableJoin): Removed print.
+         * Thuban/UI/join.py (JoinDialog): Functional implementation of
+         former framework. Renamed Table1/Table2 to LeftTable/RightTable
+         in all occurences.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__doc__):
+         Typo fixed.
+-05-22  Bernhard Herzog  <[email protected]>
+         Give the tables titles so that the GUI can display more meaningful
+         names. For now the titles are fixed but depend on e.g. filenames
+         or the titles of the joined tables.
+         * Thuban/Model/transientdb.py (TransientTable.Title)
+         (TransientJoinedTable.Title, AutoTransientTable.Title): New.
+         * Thuban/Model/table.py (DBFTable.Title, MemoryTable.Title): New.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_title): New. Test
+         for the Title method
+         (TestTransientTable.test_transient_joined_table)
+         (TestTransientTable.test_transient_table): Add test for the Title
+         methods
+         * test/test_memory_table.py (TestMemoryTable.test_title): New.
+         Test for the Title method
+         * test/test_dbf_table.py (TestDBFTable.test_title): New. Test for
+         the Title method
+-05-22  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.setUp, TestLayer.tearDown):
+         Provide a better way to destroy the layers
+         (TestLayer.test_base_layer, TestLayer.test_arc_layer)
+         (TestLayer.test_point_layer, TestLayer.test_empty_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_get_field_type): Use
+         the new way to destroy the layers.
+         (TestLayer.test_derived_store): New. Test for using a layer with a
+         DerivedShapeStore
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Only set the
+         filename if the shape store actually has one.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (DBFTable.FileName): New. Accessor method
+         for the filename
+         * test/test_dbf_table.py (TestDBFTable.test_filename): New. Test
+         for the FileName method
+         (TestDBFTableWriting.test_write): Fix spelling of filename
+-05-22  Thomas Koester  <[email protected]>
+         * Thuban/Model/range.py, test/test_range.py: Brought over new Range
+         from SciParam that now really is immutable.
+-05-22  Frank Koormann  <[email protected]>
+         Layer Top/Bottom placement added to legend.
+         * Thuban/UI/legend.py
+         (LegendPanel._OnMoveTop(), LayerPanel._OnMoveBottom): New, methods
+         bound to tool events.
+         (LegendTree.MoveCurrentItemTop(), LegendTree.MoveCurrentItemBottom):
+         New, methods binding the event methods with the map methods.
+         * Thuban/Model/map.py (Map.TopLayer(), Map.BottomLayer()): New, place
+         layer at top/bottom of layer stack.
+         * Resources/Bitmaps/top_layer.xpm: New button icon.
+         * Resources/Bitmaps/bottom_layer.xpm: New button icon.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.RemoveTable): New method to
+         remove tables
+         * test/test_session.py (TestSessionSimple.test_remove_table): New.
+         Test for RemoveTable
+-05-22  Thomas Koester  <[email protected]>
+         * Thuban/Model/classgen.py: Added short module doc string and CVS id.
+         (ClassGenerator.GenUniformDistribution): Use new Range __init__, too.
+-05-22  Bernhard Herzog  <[email protected]>
+         Implement a way to discover dependencies between tables and
+         shapestores.
+         * Thuban/Model/transientdb.py (TransientTableBase.Dependencies)
+         (TransientJoinedTable.Dependencies)
+         (AutoTransientTable.SimpleQuery): New. Implement the dependencies
+         interface
+         (TransientJoinedTable.__init__): Keep tack of the original table
+         objects in addition to the corresponding transient tables.
+         * Thuban/Model/table.py (DBFTable.Dependencies)
+         (MemoryTable.Dependencies): New. Implement the dependencies
+         interface
+         * Thuban/Model/data.py (ShapeTable): New. Helper class for
+         ShapefileStore
+         (ShapefileStore.__init__): Use ShapeTable instead of
+         AutoTransientTable
+         (ShapefileStore.Table, ShapefileStore.Shapefile): Add doc-strings
+         (ShapefileStore.FileName, ShapefileStore.FileType): New. Accessor
+         methods for filename and type
+         (ShapefileStore.Dependencies): New. Implement the dependencies
+         interface
+         (DerivedShapeStore): New class to replace SimpleStore. The main
+         difference to SimpleStore is that it depends not on a shapefile
+         but another shapestore which expresses the dependencies a bit
+         better
+         (SimpleStore.__init__): Add deprecation warning.
+         * test/test_dbf_table.py (TestDBFTable.test_dependencies): New.
+         Test for the Dependencies method.
+         * test/test_memory_table.py (TestMemoryTable.test_dependencies):
+         New. Test for the Dependencies method.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_dependencies): New.
+         Test for the Dependencies method.
+         (TestTransientTable.test_transient_joined_table): Add test for the
+         Dependencies method.
+         * test/test_session.py (TestSessionSimple.setUp)
+         (TestSessionSimple.tearDown): New. Implement a better way to
+         destroy the sessions.
+         (TestSessionSimple.test_initial_state)
+         (TestSessionSimple.test_add_table): Bind session to self.session
+         so that it's destroyed by tearDown
+         (TestSessionSimple.test_open_shapefile): New. Test for
+         OpenShapefile and the object it returns
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.AddTable): New method to
+         register tables with the session.
+         (Session.Tables): Return the tables registered with AddTable too.
+         * test/test_session.py (TestSessionSimple.test_add_table): New.
+         Test case for the AddTable method
+-05-22  Frank Koormann  <[email protected]>
+         UI polishing updates: Place main buttons (OK, Cancel, etc) in the
+         lower right corner, center labels for selections, initialize controls
+         in reasonable order for keyboard navigation.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__, ProjFrame.__doLayout)
+         (ProjFrame.__DoOnProjAvail): Determine position of current projection
+         using the wxListBox.FindString() method. Still a problem (#1886)
+         * Thuban/UI/classifier.py
+         (Classifier.__init__, SelectPropertiesDialog.__init__)
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__,
+         (ClassGenDialog.__DoOnGenTypeSelect): Moved initialization of the
+         different classification types from here to __init__.
+         (GenUniquePanel.__init__): Set the column width of the first field
+         in the Field ListCtrl to the full width.
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Rename 'Save As'
+         Button to 'Export'. Center Buttons in Selection Box, set Focus to
+         Grid.
+         (LayerTableFrame.OnKeyDown()): New, bound to the grid with EVT_KEY_DOWN,
+         changes focus to the Selection when pressing "Alt-S".
+         * Thuban/UI/legend.py (LegendTree.__SetVisibilityStyle): Only gray out
+         the text if not visible. The italic font sometimes exceeds the
+         rendering area.
+-05-21  Jonathan Coles   <[email protected]>
+         * Thuban/UI/dock.py (DockFrame): Rename references to _OnClose
+         to OnClose so that Thuban closes correctly.
+         * Thuban/UI/mainwindow.py (MainWindow.OnClose): Call
+         DockFrame.OnClose, not DockFrame._OnClose.
+-05-21  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (ClassGenerator.GenQuantiles): Remove
+         references to 'inf' and use new Range __init__ to pass floats
+         directly rather than converting them to strings first.
+         Fixes RTBug #1876.
+         * Thuban/Model/classification.py (ClassGroupRange.SetRange):
+         Use new Range ___init__ to pass floats.
+         * Thuban/Model/layer.py (RasterLayer.__init__): Test if the
+         filename is a valid image file. Throw IOError otherwise.
+         * Thuban/Model/range.py: Brought over new Range from SciParam that
+         is immutable and has an __init__ which can accept floats.
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Move OpenShapefile
+         into try block. AddLayer doesn't throw any exceptions anymore.
+         (MainWindow.AddRasterLayer): Move constructor of RasterLayer into
+         try block.
+         * Thuban/UI/projdialog.py (GeoPanel.__init__): Put Degrees as
+         the first item in choices. Fixes RTBug #1882.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Check if scale
+         has gone to 0 which is a serious problem. abort.
+         (MapRenderer.draw_raster_layer): Catch IOError seperately and
+         print the error from GDAL.
+         * Thuban/UI/tableview.py (TableGrid.__init__): Call
+         ToggleEventListeners to turn on listening.
+         (TableGrid.ToggleEventListeners): New. Turns event listening on
+         and off so as to prevent excessive messages.
+         (LayerTableFrame.OnQuery): Use TableGrid.ToggleEventListeners
+         to suppress excessive messages when selecting many rows.
+         Fixes RTBug #1880.
+         * Thuban/UI/view.py: Added checks against if scale == 0. This
+         is a serious problem that can occur when an image without
+         geo data is loading and causes the map projection bounds to
+         go to infinity. Right now, the solution is to simply try
+         to recover.
+         * extensions/thuban/cpl_mfile.cpp (MFILEClose): Make sure
+         to set the MFILEReceiver attributes even if the data is NULL.
+         * extensions/thuban/gdalwarp.cpp: Improved the error handling
+         and passed GDAL messages back up to the Python layer. Also
+         tried to fix some memory leaks that were present in the original
+         utility but didn't matter because the program aborted.
+         * test/test_range.py: Copied over tests from SciParam. Removed
+         tests against importing. Fixes RTBug #1867.
+-05-21  Bernhard Herzog  <[email protected]>
+         * test/test_load.py: Remove unused imports and restructure the
+         test code
+         (LoadSessionTest): Split into one class for each test and turn
+         LoadSessionTest itself into the base class for all such session
+         tests.
+         (ClassificationTest): New base class for load tests that test
+         classifications
+         (TestSingleLayer, TestLayerVisibility, TestClassification)
+         (TestLabels, TestLayerProjection, TestRasterLayer): New classes
+         for the individual tests
+         * test/support.py (FileLoadTestCase.filename): New base class for
+         file loading tests
+-05-21  Jan-Oliver Wagner <[email protected]>
+         * Resources/Projections/defaults.proj: Renamed 'Universal Transverse
+         Mercator' to 'UTM Zone 32' as a more convenient example.
+         Added 'Gauss Krueger Zone 6'.
+         * Data/iceland_sample_raster.thuban: political polygon now
+         filled transparent to have the raster image visible at once.
+-05-21  Frank Koormann  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow): Renamed _OnClose() back to
+         OnClose() to keep in sync with extensions. Internally Thuban
+         still uses "underscored" names.
+-05-20  Jonathan Coles   <[email protected]>
+         This puts back Raster layer support. These layers support projections
+         through the GDAL library. Currently, the CVS version is being used.
+         There are no Debian packages available although this may change soon.
+         A GDAL driver was extended to support writing to memory rather to
+         files.
+         There is still some work that needs to be done, such as some error
+         handling when loading invalid images or when there is a problem
+         projecting the image. This putback simply checks in the majority
+         of the work.
+         * setup.py: Add gdalwarp library extension.
+         * Thuban/Model/layer.py (BaseLayer.HasClassification): New.
+         Defaults to False, but can be overridden by subclasses if they
+         support classification.
+         (RasterLayer): New. Defines a new layer that represents an
+         image.
+         * Thuban/Model/load.py (SessionLoader.__init__): Add rasterlayer
+         tag handler.
+         (SessionLoader.start_layer): Encode the filename.
+         (SessionLoader.start_rasterlayer, SessionLoader.end_rasterlayer):
+         New. Supports reading a rasterlayer tag.
+         * Thuban/Model/map.py (Map.BoundingBox): Fix typo in comment.
+         * Thuban/Model/save.py (XMLWriter.encode): Don't assume that we
+         get a string in Latin1. If we get such as string convert it to
+         unicode first, otherwise leave if alone before encoding.
+         (SessionSaver.write_layer): Add support for writing both Layers
+         and RasterLayers.
+         * Thuban/Model/transientdb.py (AutoTransientTable.SimpleQuery):
+         The right argument may not be a string, it could also be a Column.
+         * Thuban/UI/application.py (ThubanApplication.CreateMainWindow):
+         Make initial window size 600x400. Fixes RTBug #1872.
+         * Thuban/UI/classifier.py (Classifier.__init__): Rearrange how
+         the dialog is constructed so that we can support layers that
+         do not have classifications.
+         (Classifier._OnTry): Only build a classification if the layer
+         supports one.
+         * Thuban/UI/legend.py: Change all checks that a layer is an
+         instance of Layer into checks against BaseLayer.
+         (LegendTree.__FillTreeLayer): Only add children to a branch if
+         the layer supports classification.
+         * Thuban/UI/mainwindow.py (MainWindow.NewSession,
+         MainWindow.OpenSession): Don't proceed with an action if the
+         user chooses Cancel when they are asked to save changes.
+         (MainWindow.AddRasterLayer): New. Open a dialog to allow the
+         user to select an image file. Create a new RasterLayer and add
+         it to the map.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Add support
+         for rendering RasterLayer layers.
+         (MapRenderer.draw_raster_layer): Actually method that calls
+         the GDALWarp python wrapper and constructs an image from the
+         data returned.
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Change the
+         Choices symbols to match those used in the table query method.
+         Replace deprecated method calls on table with new method names.
+         * Thuban/UI/view.py (MapCanvas.set_view_transform): Try to limit
+         how small the scale can get. This still needs more testing.
+         * extensions/thuban/bmpdataset.cpp: New, but copied from GDAL.
+         Provides a driver to output in .bmp format.
+         * extensions/thuban/cpl_mfile.cpp, extensions/thuban/cpl_mfile.h:
+         New. Provides IO routines which write to memory, rather than a file.
+         * extensions/thuban/gdalwarp.cpp: New, but basically a direct copy
+         of the gdalwarp utility provided in GDAL. Added function calls
+         that can be accessed from python.
+         * Data/iceland_sample_raster.thuban: New. Sample file that uses
+         a raster layer.
+         * Data/iceland/island.tfw, Data/iceland/island.tif: New. Raster
+         layer image data.
+         * Doc/thuban.dtd: Added rasterlayer attribute definition.
+         * test/test_layer.py, test/test_load.py, test/test_save.py: Added
+         tests associated with the raster layer code.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_query): Added a test
+         for using a Column object as the "right" parameter to a query.
+-05-19  Frank Koormann  <[email protected]>
+         * Thuban/version.py (get_changelog_date):
+         Catch exceptions if ChangeLog does not exist.
+         * Thuban/UI/view.py (MapCanvas.Export): Bugfix
 -05-19  Frank Koormann  <[email protected]>
          Extended version information for Thuban

 Legend:



Removed from v.924
 


changed lines


 
Added in v.2003
 Legend:



Removed from v.924
 


changed lines


 
Added in v.2003
-Removed from v.924
+Added in v.2003

[email protected]	ViewVC Help
Powered by ViewVC 1.1.26