/[thuban]/branches/WIP-pyshapelib-bramz/ChangeLog

Diff of /branches/WIP-pyshapelib-bramz/ChangeLog

Parent Directory | Revision Log | View Patch Patch

-revision 924 by frank,
Mon May 19 09:12:42 2003 UTC
+revision 2558 by jonathan,
Mon Feb  7 19:51:13 2005 UTC
 Line 1
+-02-07  Jonathan Coles <[email protected]>
+         * libraries/thuban/gdalwarp.cpp: Removed the macros PYTHON_ERR
+         and PYTHON_ERRF since they were no longer necessary.
+-02-07  Bernhard Reiter <[email protected]>
+         * Thuban/UI/classifier.py (ClassGrid.DeleteSelectedRows):
+         Enable translation for message string.
+-02-06  Martin Schulze  <[email protected]>
+         * Extensions/wms/infodialog.py (wmsInfoDialog.__init__): Adjusted
+         the arguments of the contstructor to fit the global scheme
+-01-31  Nina H�ffmeyer <[email protected]>
+         * Extensions/ogr/ogrdialog.py: Added class ogrdialog.py, which provides
+         some dialogs needed to start ogr.
+         * Extensions/ogr/__init__.py: Changed comments to avoid encoding
+         warnings.
+         * Extensions/ogr/test/test_OGRShapestore.py: Changed comments to avoid
+         encoding warnings.
+-01-28  Jonathan Coles <[email protected]>
+         * libraries/thuban/gdalwarp.cpp (GetImageData): Recode how the
+         mask is packed into a bit array. It's now slightly faster.
+-01-28  Jonathan Coles <[email protected]>
+         * Thuban/Model/layer.py (RasterLayer.__init__): Make use_mask
+         default to true.
+         * Thuban/Model/load.py (SessionLoader.start_rasterlayer): Remove
+         code that loads the state of the layer's use_mask flag. Its
+         usefulness is still being debated.
+         * Thuban/Model/save.py (SessionSaver.write_layer): Remove
+         code that saves the state of the layer's use_mask flag. Its
+         usefulness is still being debated.
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_raster_layer): Pass
+         options to ProjectRasterFile based on the state of layer.UseMask().
+         Catch more exceptions from ProjectRasterFile so that Thuban doesn't
+         quit is there is a problem projecting.
+         (BaseRenderer.draw_raster_data): Change the documentation to
+         describe the new format (XBM) that the mask data will be in.
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_data): The mask
+         data is in XBM format when format='RAW' which means it doesn't
+         need to be converted to a wxImage before being used as a mask
+         for a wxBitmap. Assume that if format != 'RAW' that the image
+         data and mask data are in the same format.
+         * libraries/thuban/gdalwarp.cpp (GetImageData): If alpha is enabled
+         and a mask is requested, convert the alpha band to a bit array in
+         XBM format. if an alpha channel is requested, simply return the
+         data in the alpha band. Provide better error handling by returning
+         python error messages (also fixes RT #2947).
+         (ProjectRasterFile): Support multiple mask options, rather than simply
+         a flag indicating that a mask should or should not be used. Provide
+         better error handling by returning python error messages.
+         * test/test_baserenderer.py (TestBaseRenderer.test_raster_no_projection):
+         Add mask data to test.
+         * test/test_layer.py (TestLayer.test_raster_layer): Test that a layer
+         should use the mask by default.
+         (TestLayerModificaton.test_raster_layer): Test that a layer should use
+         the mask by default.
+         * test/test_load.py (TestRasterLayer.test): Remove testing for
+         use_mask flag in file.
+         * test/test_save.py (SaveSessionTest.testRasterLayer): Remove testing
+         for use_mask in file.
+         * test/test_load_1_0_1.py: Removed. Shouldn't have been checked in.
+-01-26  Jonathan Coles <[email protected]>
+         Add a new dialog box for raster layers. The dialog box allows
+         the user to toggle a mask that is generated by ProjectRasterFile
+         and is used to only draw the real parts of the projected image.
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_raster_layer):
+         Instruct the warping code to generate a mask if the raster layer
+         requests one.
+         (BaseRenderer.draw_raster_data): Removed obsolete optional mask argument.
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_data): Removed
+         obsolete optional mask argument.
+         * Thuban/UI/classifier.py (Classifier): Change the parent class
+         to LayerProperties and rework the code to support layout calls
+         from the parent.
+         (Classifier.dialog_layout): New. Layout the dialog box.
+         (Classifier.map_layers_removed): Removed. Moved to parent class.
+         (Classifier.map_replaced): Removed. Moved to parent class.
+         (Classifier._OnTry): Renamed to OnTry to support parent class.
+         (Classifier.OnClose): Removed. Supplied in parent class.
+         (Classifier._OnCloseBtn): Removed. Supplied in parent class as OnCloseBtn.
+         (Classifier._OnOK): Renamed to OnOK to support parent class.
+         (Classifier._OnRevert): Renamed to OnRevert to support parent class.
+         * Thuban/UI/layerproperties.py: New. Base class for layer properties
+         dialog boxes.
+         * Thuban/UI/rasterlayerproperties.py: New. Class for displaying
+         raster layer properties.
+         * libraries/thuban/gdalwarp.cpp: Replace the old gdalwarp.cpp code
+         with the non-simple version supplied with gdal. This allows added
+         features such as creating an alpha band.
+         (GetImageData): Generate a mask array from the alpha band that is
+         generated by gdal if the user has selected it. Try to support images
+         that have more than three bands, such as images with RGB plus an
+         alpha band.
+         (ProjectRasterFile): Convert python argument for mask and tell
+         gdal to enable or disable an alpha band.
+         * Thuban/Model/layer.py (BaseLayer.Type): New. Returns a string
+         describing what kind of layer the class is. Defaults to "Unknown",
+         but should be overridden by subclasses.
+         (Layer.Type): New. Override base class method.
+         (RasterLayer.__init__): Create a flag for using a mask. Record extra
+         data from gdal for display in the properties dialog.
+         (RasterLayer.Type): New. Override base class method.
+         (RasterLayer.UseMask): New. Returns True if the mask should be used.
+         (RasterLayer.SetUseMask): New. Set if the mask should be used.
+         (RasterLayer.ImageInfo): New. Return extra information about the image.
+         * Thuban/Model/load.py (SessionLoader.start_rasterlayer): Load
+         the mask information.
+         * Thuban/Model/save.py (SessionSaver.write_layer): Save mask information.
+         * Thuban/UI/mainwindow.py: Register the RasterLayerProperties and
+         Classifier classes as dialogs to use with the proper layer types.
+         * test/test_baserenderer.py (TestBaseRenderer.test_raster_no_projection):
+         Fix test.
+         * test/test_layer.py (TestLayer.test_raster_layer): Test new methods.
+         (TestLayerModification.build_path): New. Support function.
+         (TestLayerModification.test_raster_layer): New. Test new methods.
+         * test/test_save.py (SaveSessionTest.testRasterLayer): Add tests for mask.
+         * test/test_load.py (TestRasterLayer): Add tests for mask.
+         * test/test_load_1_0_1.py: New. Copied from test_load.py.
+         * test/test_baserenderer.py (SimpleRenderer.draw_raster_data): Removed
+         obsolete optional mask argument.
+-01-26  Nina H�ffmeyer <[email protected]>
+         * Extensions/ogr/ogrshapes.py: Added two dictionaries to ShapeStore
+         which maps the ids and the ordinals. Fixed RowIdToOrdinal(),
+         RowOrdinalToId() and ReadRowAsDict().
+         * Extensions/ogr/ogrstart.py: Added menu item which opens database
+         layers for existing database connections.
+         * Extensions/ogr/test/test_OGRShapestore.py: Fixed a message string.
+-01-26  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual-de.xml: More translations.
+-01-24  Bernhard Herzog  <[email protected]>
+         Rework the status bar updates a bit to make sure the message about
+         the projections is produced at the right times.
+         * Thuban/UI/mainwindow.py (MainWindow.update_status_bar_messages):
+         New class variable with messages that may require a status bar
+         update.
+         (MainWindow.view_position_changed)
+         (MainWindow.update_status_bar): Rename from view_position_changed
+         to update_status_bar.  It's meaning has changed now that it may
+         also generate messages about problems with projection settings.
+         (MainWindow.__init__): Use the new update_status_bar_messages
+         class variable to subscribe update_status_bar
+         (MainWindow.set_position_text): Update doc-string.  This method
+         has to be renamed at some point.  See doc-string and comments.
+         (MainWindow.OnClose): Unsubscribe update_status_bar from all
+         messages in update_status_bar_messages
+         * Thuban/UI/viewport.py (ViewPort.forwarded_map_messages): New
+         class attribute.  map messages to be forwarded by the viewport.
+         (ViewPort._subscribe_map, ViewPort._unsubscribe_map): (un)subscribe
+         the messages in forwarded_map_messages
+-01-21  Bernhard Herzog  <[email protected]>
+         * test/postgissupport.py (PostGISDatabase.__init__): Tweak
+         doc-string
+         (find_postgis_sql): Update for postgis-1.0.0-rc1, which uses a
+         different name for the initialization SQL file.
+-01-21  Jonathan Coles <[email protected]>
+         * Thuban/UI/baserenderer.py (proj_params_to_str): New. Takes
+         a projection and returns a formatted string representing the
+         parameters to feed to gdalwarp. This function eliminates
+         redundancy in draw_raster_layer().
+         (BaseRenderer.render_map_incrementally): Removed the optimization which
+         drew the top most raster layer first and then only those vector-
+         based layers that are above it. With the support for transparency
+         this optimization breaks correct behaviour.
+         (BaseRenderer.draw_raster_layer): Reorganize code to support possible
+         future enhancements to raster layer bounding box. The old behaviour has
+         not changed. Also, change calling parameters to draw_raster_data()
+         to specify new RAW data format and mask.
+         (BaseRenderer.draw_raster_data): Change signature to include an optional
+         parameter for mask information. Change documentation to mention
+         support for new parameter and added option for RAW data format.
+         The data argument is now a list of [width, height, data].
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_data): Add new optional
+         mask parameter. Add new condition for RAW format, which
+         significantly reduces rendering time. Add condition for
+         mask parameter.
+         * libraries/thuban/gdalwarp.cpp (GetImageData): New. Creates a
+         data array of RGB values from the projected image returned from
+         the gdal warping functions. In the case of palette based images, it
+         converts the NO_DATA index to the mask color.
+         (ProjectRasterFile): Removed all custom memory driver references
+         and replaced it with the standard in-memory dataset provided
+         by gdal. The return data is no longer a BMP file, but an array
+         of RGB values, one set triple per pixel.
+         * libraries/thuban/bmpdataset.cpp: Removed. Unnecessary.
+         * libraries/thuban/cpl_mfile.h: Removed. Unnecessary.
+         * libraries/thuban/cpl_mfile.cpp: Removed. Unnecessary.
+         * setup.py (thuban_build_ext.finalize_options): Removed mention
+         of cpl_mfile.cpp and bmpdataset.cpp files in the list of source
+         files. These are obsolete with the new version of gdalwarp.cpp
+         * test/test_baserenderer.py (SimpleRenderer.draw_raster_data):
+         Updated signature.
+         (TestBaseRenderer.test_raster_no_projection): Changed the test
+         data to be data in the uncompressed RAW format returned from
+         ProjectRasterFile.
+-01-21  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.view_position_changed): Made
+         string available for i18n.
+-01-20  Russell Nelson  <[email protected]>
+         * Resources/Projections/defaults.proj: Ruin the speling of the
+         Lambert-93 projection so it doesn't run into the wx UTF-8 bug.
+         It's the wrong thing to do in the long run, but it's necessary for
+         those users until that bug is fixed.  Otherwise the projection
+         dialog segfaults.  Better to annoy some Lambert-93 users with a
+         spelling mistake than every Fedora Core 3 user of Thuban-CVS.
+-01-20  Bernhard Reiter <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.view_position_changed): Added
+         docstring and comment that the warning code here is a hack.
+-01-20  Russell Nelson  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.view_position_changed): Warn
+         user about misprojected layers when their lat/lon bounding
+         box exceeds rational lat/lon values.
+-01-20  Bernhard Reiter <[email protected]>
+         * Thuban/UI/about.py (unicodeToLocale): Improved:
+         Use 'ascii' and then 'replace' for other characters
+         when getdefaultlocale returns None. Thanks to Bernhard H. .
+-01-20  Bernhard Reiter <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.OnRetrieve): Added a comment
+         that OnRangeText might be called twice and using None as argument.
+-01-20  Bernhard Reiter <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.OnRetrieve): Add a
+         OnRangeText(0) to work around a different in wx Behaviour noticed
+         on MacOSX, thanks to Lorenzo Moretti and Daniel Calvelo for the fix.
+-01-20  Bernhard Reiter <[email protected]>
+         * Thuban/UI/about.py: take iso-8859-15 when getdefaultlocale returns
+         None. (Fixes rt#2910.)
+-01-18  Frank Koormann <[email protected]>
+         New Extension: mouseposition
+         Tool to collect mouse click positions (map coordinates) in a dialog.
+         * Extensions/mouseposition/__init__.py: New, extension registration
+         * Extensions/mouseposition/mouseposition.py: New, implements the
+         dialog and adds a tool to Thuban mainwindow.
+         * Extensions/mouseposition/position.xpm: New, icon for tool.
+-01-14  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual-de.xml: More translations.
+-01-11  Frank Koormann <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.DuplicateLayer):
+         Fix indention bug.
+-01-09  Frank Koormann <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.DuplicateLayer):
+         BugFix 2901: Explicitly copy layers ClassificationColumn since it
+         is not part of the layers Classification.
+-01-03  Frank Koormann <[email protected]>
+         * Thuban/UI/renderer.py (ScreenRendererdraw_selection_incrementally):
+         BugFix 2883: Former implementation only worked on classified point
+         layers: KeyError was raised, now use the default size if field is None.
+-12-27  Bernhard Reiter <[email protected]>
+         svgexport 1.0.0cvs: Fixed label export.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         class TestSVGRenderer(): New class; new test test_label_font().
+         * Extensions/svgexport/svgmapwriter.py
+         (SVGRenderer.label_font()): initialised Font size with self.factor now,
+         makes test_label_font happy.
+         * Extensions/svgexport/TODO: crossed out fixed label export item.
+         Added item for options.
+         * Extensions/svgexport/__init__.py: Bumped version to 1.0.0cvs.
+-12-27  Russell Nelson  <[email protected]>
+         Middle mouse button pans.
+         * Thuban/UI/view.py (MapCanvas.__init__): Subscribe also
+         OnMiddleDown and OnMiddleUp events.
+         (MapCanvas.OnMiddleDown): New. Activate the pan tool and remember the
+         previously used tool.
+         (MapCanvas.OnMiddleUp): New. Reactivate the remebered tool used before
+         pressing the middle mouse button.
+-12-27  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual-de.xml: More translations.
+-12-23  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.load_user_proj): Added a
+         \n to stderr after the warnings. Thanks to Russell Nelson.
+-12-20  Nina Hueffmeyer <[email protected]>
+         * Extensions/ogr/ogrshapes.py: Fixed some issues from
+         Bernhard (coding guidelines etc.). Additionally it is now possible to
+         display shapefiles containing feature collections (e.g.polygons
+         with holes). Works with gdal 1.2.1 now.
+         * Extensions/ogr/test/test_OGRShapestore.py: Fixed some issues
+         from Bernhard (coding guidelines etc.). If ogr can't be imported,
+         tests are skipped now.
+         * Extensions/ogr/ogrstart.py: Fixed some typings.
+-12-20  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/TODO: updated to add support for
+         raster layers and labels for 1.0.1.
+         * Extensions/svgexport/svgmapwriter.py (draw_raster_layer):
+         Issue a warning now.
+-12-19  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/TODO: Added idea to support triggering
+         the application down the pipe.
+-12-19  Bernhard Reiter <[email protected]>
+         svgexport: Improved code quality, mainly by better naming.
+         * Extensions/svgexport/svgmapwriter.py:
+         DrawPath() renamed to DrawPolygonPath(),
+         added documentation, improved comments and variable names.
+         * Extensions/svgexport/svgmapwriter.py,
+           Extensions/svgexport/test/test_svgmapwriter.py:
+         All using DrawPolygonPath() now, the default parameter closed=True
+         omitted.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         renamed test_polygon_opened() to test_polyline()
+         renamed test_transparent_polygon() to test_transparent_polyline()
+-12-18  Jan-Oliver Wagner <[email protected]>
+         Some fixes of gns2shp extension.
+         * Extensions/gns2shp/test/__init__.py: New. Make this directory a
+         package.
+         * Extensions/gns2shp/test/test_gns2shp.py: Add some import paths
+         dynamically.
+         * Extensions/gns2shp/test/README: Simplified description how to test.
+         * Extensions/gns2shp/gns2shp.py (gns2shp): Fixed doc-string,
+         fixed some dimensions of fields according to the GNS documentation
+         which seems to change undocumented.
+         Now killing trailing \n and/or \r from MODIFY_DATE.
+         This fixes RT#2453.
+-12-18  Bernhard Reiter <[email protected]>
+         svgexport 1.0.0: Treats holes and islands nicely. Documentation added.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Added new tests: test_export_polygon_with_hole()
+         and test_polygon_with_hole().
+         * Extensions/svgexport/svgmapwriter.py
+         (draw_polygon_shape()): Uses DrawPath correctly now.
+         * Doc/manual/thuban-manual.xml: Added documentation for stable
+         extention svgexport.
+         * Doc/manual/thuban-manual-de.xml: Copied English section about
+         svexport over.
+         * Extensions/svgexport/__init__.py: Bumped version number to 1.0.0.
+         * Extensions/svgexport/svgsaver.py,maplegend.py:
+         Moved from experimental to stable extension menu.
+         * Extensions/svgexport/TODO: updated.
+-12-18  Bernhard Reiter <[email protected]>
+         Added Extensions/svgexport/TODO
+-12-18  Bernhard Reiter <[email protected]>
+         Refactored in svgexport:
+         DrawPath replaces DrawPolygon; added newline in front of "M" in paths.
+         * Extensions/svgexport/svgmapwriter.py
+         Added verbosity level 3 to print out polygon points.
+         (class Point): added __repr__
+         (class Brush, __str__()): Added space after ,.
+         (DrawPolygon): Renamed to DrawPath()
+         (DrawPath): Takes list of polygons as input now, adds \n before "M"s.
+         (DrawLines): Using DrawPath now.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Replaced DrawPolygon() calls with DrawPath() and put the first argument
+         inside another list. Adapted test data with a newline before "M".
+-12-18  Bernhard Reiter <[email protected]>
+         Refactored svgexport tests: 9 double tests runs eliminated;
+         code size reduced by 8 lines.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         (class TestWithDC): Renamed to BaseTestWithDC, moved to top.
+         (class BaseWithDCtools): New, subclass from BaseTestWithDC.
+         (class TestDrawSplines): now subclass from BaseTestWithDCtools,
+         this fixed the double running of the nine tests of TestVirtualDC.
+         (class TestVirtualDC): Using self.dc and self.file from setUp().
+-12-17  Bernhard Herzog  <[email protected]>
+         Two windows specific fixes ported from thuban-1�0-branch:
+         * Thuban/UI/about.py (unicodeToLocale): Use getdefaultlocale
+         instead of getlocale because getlocale doesn't return a usable
+         encoding name on a german windows 2000
+         * setup.py: windows build: Removed the absolute path names and
+         made all prfixes relative to the directory containing setup.py.
+         Makes it a little easier to adapt to a different system.
+-12-16  Bernhard Herzog  <[email protected]>
+         Add support for PostGIS tables with LINESTRING geometries.
+         Fixes RT#2299
+         * Thuban/Model/postgisdb.py (shapetype_map): Add LINESTRING
+         * test/postgissupport.py
+         (PostgreSQLServer.get_default_static_data_db): Rename the "roads"
+         table to "roads-multi" because it now uses MULTILINESTRING
+         geometries and introduce a new "roads" table that uses LINESTRING
+         (coords_to_multilinestring): Make the doc string more precise
+         (coords_to_linestring): New.  Create a LINESTRING WKT
+         representatin
+         (wkt_converter): Add coords_to_linestring
+         (upload_shapefile): Rephrase the doc-string a bit.
+         * test/test_postgis_db.py (TestPostGISShapestoreArc)
+         (LineStringTests)
+         (TestPostGISShapestoreLineString)
+         (TestPostGISShapestoreMultiLineString): Split
+         TestPostGISShapestoreArc into a base class LineStringTests and two
+         derived classes TestPostGISShapestoreLineString for LINESTRING
+         geometries and TestPostGISShapestoreMultiLineString for
+         MULTILINESTRING geometries.  Most test methods are in the base
+         class with the exception of tests that explicitly check the raw
+         format.
+-12-16  Bernhard Herzog  <[email protected]>
+         Make the test suite work with PostGIS 0.8.2 and PostgreSQL 7.4
+         * test/postgissupport.py (find_postgis_sql): Different postgis
+         versions put the postgis.sql file into slightly different places
+         so we have to look in both.  The updated doc string describes this
+         is more detail.
+         * test/test_postgis_db.py
+         (TestPostGISSpecialCases.test_column_name_quoting): The return
+         value of UniqueValues is unsorted, so it has to be sorted for
+         comparison.
+-12-16  Bernhard Herzog  <[email protected]>
+         Fix for RT#2237
+         * Thuban/UI/projdialog.py (ProjFrame._show_proj_panel): If the
+         panel to be shown is the UnknownProjPanel disable the OK and Try
+         buttons.  Otherwise enable them.
+         (ProjFrame.__GetProjection): The UnknownProjPanel returns None for
+         the parameters.  In that case __GetProjection also returns None
+         now.
+-12-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.__init__): Set the
+         minimum number of classes to 2.  The calculate_quantiles needs at
+         least two and raises an exception otherwise.
+         Fixes RT#2549
+-12-15  Bernhard Herzog  <[email protected]>
+         * test/postgissupport.py (PostgreSQLServer.execute_sql): Extend to
+         so that it returns a result for select statements.
+         (PostgreSQLServer.server_version): New.  Return the version of the
+         server software.
+         (PostgreSQLServer.require_authentication): The format of
+         pg_hba.conf has changed between PostgrSQL 7.2 and 7.3.  Check the
+         server version and generate the file in the correct format
+-12-15  Bernhard Herzog  <[email protected]>
+         * test/postgissupport.py (PostgreSQLServer.is_running): Fix typo
+         in the doc string and rephrase it a little.
+-12-15  Frank Koormann <[email protected]>
+         * test/test_load.py (TestAltPath.checkSession): New, extended checks if
+         session has been loaded successfully. The check is called by the relevant
+         tests after executing load_session().
+-12-13  Bernhard Herzog  <[email protected]>
+         Make sure the region used to determine which shapes are visible
+         actually matches the region on the printed page.  If this isn't
+         done properly some shapes might not be printed.
+         Fixes RT #2692
+         * Thuban/UI/view.py (MapPrintout.draw_on_dc): The region for the
+         renderer has to be at the same position as the mapregion
+         * Thuban/UI/renderer.py (ExportRenderer.RenderMap): self.region
+         has to be moved by (self.shiftx, self.shifty) too.
+-12-13  Bernhard Herzog  <[email protected]>
+         * libraries/pyprojection/Projection.i: Work around a bug in the
+         generated python code which leads to exception in the __del__
+         method when the constructor fails.  See the comments in the code
+         for more details.
+         * libraries/pyprojection/Projection.py: Updated from Projection.i
+         with SWIG.
+-12-13  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (TestAltPath.test_01_single_path_error_fix)
+         (TestAltPath.test_02_path_error_fix_from_list)
+         (TestAltPath.test_05_path_error_fix_from_list_changed)
+         (TestAltPath.test_06_path_error_fix_from_list_fails): self.session
+         is destroyed in tearDown, so there's no need to do it in a test
+         case.
+         * Thuban/Model/load.py (SessionLoader.open_shapefile): Remove a
+         debug print
+-12-13  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py
+         (TestDrawSplines.setUp): Do not use super with the unittest
+         classes because in Python 2.2 they're still old-style classes.
+-12-13  Frank Koormann <[email protected]>
+     Alternative Path feature: When loading a (moved) session where
+         shapefiles cannot be found, ask the user. Use the specified path
+         if further shapefiles are missing. However, ask the usr for confirmation
+         in such cases.
+         * test/test_load.py (TestAltPath): New, tests for alternative path feature
+         in load_session()
+         (Shapefile_CallBack): Helper, implements controllable callback.
+         * Thuban/UI/application.py (ThubanApplication.OnInit):
+         Added "alt_path" to self.path
+         (ThubanApplication.OpenSession): Added shapefile_callback as second
+         callback similar to db_connection_callback.
+         (ThubanApplication.run_alt_path_dialog): New, implementaion of
+         shapefile_callback. In addition to raising the dialog the control of
+         self.path('alt_path') is implemented here.
+         * Thuban/Model/load.py (SessionLoader.__init__): Added shapefile_callback.
+         (SessionLoader.open_shapefile): Open shapefile, eventually with
+         alternative path. This wrapps the "theSession.OpenShapefile(filename)"
+         formerly used in start_fileshapesource()/start_layer().
+         (SessionLoader.start_fileshapesource): Call open_shapefile().
+         (SessionLoader.start_layer): Call open_shapefile().
+         (load_session): Added shapefile_callback.
+         * Thuban/UI/altpathdialog.py: New, implements dialogs for alternative path
+         feature (search / check).
+         * Doc/manual/thuban-manual.xml: Added documentation of new feature.
+-12-11  Bernhard Reiter <[email protected]>
+          svgexport 0.9.2: Point size supports for maps.
+         * Extensions/svgexport/svgmapwriter.py: Added import of SHAPETYPE_POINT
+         (def draw_point_shape): new parameter size defaults to 2 as before.
+         (draw_shape_layer_incrementally): Moved draw_func log line higher.
+         Added draw_func call with size when dealing with a point layer.
+         * Extensions/svgexport/__init__.py: bumped version to 0.9.2.
+-12-11  Bernhard Reiter <[email protected]>
+         Made sure that newlines are inserted in the svg path d attributes
+         to raise the chance that the line length will be below 255 characters,
+         as recommended by REC SVG 1.1 in section 8.3.1.
+         * Extensions/svgexport/svgmapwriter.py(DrawPolygon):
+         Adding \n before L's and changed whitespace handling.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Adapted tests to new whitespace handling of DrawPolygon.
+-12-11  Bernhard Reiter <[email protected]>
+         * Doc/technotes/coding_guidelines.txt: easy typo fixed.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Removed test_drawbezier in favour of new test_drawspline3 and
+         test_drawspline4 within new class TestDrawSplines(TestVirtualDC).
+         All only to test DrawSpline.
+         * Extensions/svgexport/svgmapwriter.py(DrawSpline):
+         New implementation now really using the strange algorithm of
+         xfig 3.1's approximated splines and its conversion to postscript
+         with one twist: SVG can do quadratic beziers, so skipped translation
+         to cubic beziers.
+         (TestWithDC): Typo in comment fixed.
+-12-09  Martin Schulze  <[email protected]>
+         * Thuban/Model/classgen.py: Added missing character encoding
+         * Extensions/wms/properties.py (OpenWMSProperties): removed
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.error): Dropped
+         support for get_srs_discrepancies() since there are no
+         discrepancies anymore (was a thinko)
+         * Extensions/wms/layer.py (WMSLayer.GetMapImg): Improved graphic
+         format priority now that more formats are supported globally by
+         the render engine.
+-12-08  Silke Reimer <[email protected]>
+         * Extensions/ogr/ogrshapes.py: Substituted ogr-method CloseRings
+         because it is not available in all versions of ogr
+-12-08  Bernhard Reiter <[email protected]>
+         * Extensions/ogr/__init__.py: Added empty __init__.py to heal
+         global tests until a real one is commited.
+-12-07 Nina H�ffmeyer <[email protected]>
+         * /Extensions/ogr/: Adding a new extension to read shapefiles with
+         ogr. It is planned to add other vector formats.
+         * /test/runtests.py: Adding tests from /Extensions/ogr/test/.
+-12-07  Jan-Oliver Wagner <[email protected]>
+         * /Extensions/svgexport/test/test_svgmapwriter.py: Reverting
+         part of a (non-)fix to renable that the tests are always
+         executed.
+-12-07  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Added test_drawbezier() to test DrawSpline().
+         * Extensions/svgexport/svgmapwriter.py(DrawSpline):
+         Really implemented bezier drawing.
+         * Extensions/svgexport/__init__.py: Bumped version of svgexport
+         to 0.9.1 because now the legend examples lines styles
+         will be drawing with beziers.
+-12-05  Martin Schulze  <[email protected]>
+         * Thuban/UI/renderer.py (raster_format_map): Added PNG, TIFF and
+         GIF as supported bitmap image formats (helpful for the WMS extension)
+-11-30  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_ogclib.py (TestOGCLib.test_compareURLs):
+         Improved the test for the internal compare method
+-11-27  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Added
+         Norbert Solymosi for hungarian translation and Ole Rahn
+         as contrbutor. Moved Bernhard Reiter from Contributor
+         to Developer.
+-11-27  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Removed Jan from author list as he did not change enough significant
+         lines yet.
+         * Extensions/svgexport/__init__.py: Added Bernhard as author
+         of the Extension.
+-11-27  Jan-Oliver Wagner <[email protected]>
+         * po/hu.po: New. Hungarian translation. Contributed
+         by Norbert Solymosi.
+-11-26  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py
+         (Testobjectexport.test_transparent_polygon): Commented out some
+         debug prints
+-11-24  Jan-Oliver Wagner <[email protected]>
+         Fix broken tests for svg extension and added svg legend
+         to Experimental menu.
+         * Extensions/svgexport/test/test_svgmapwriter.py: Fix to have
+         the test run correctly even if the extension is a package.
+         Also removed the "import Thuban" which makes no sense.
+         * Extensions/svgexport/__init__.py: Fix to have the extensions'
+         test module also be executed from the global test routine.
+         This is done by looking for the absense of the DISPLAY variable.
+         * Extensions/svgexport/maplegend.py: Moved the menu entry from Extensions
+         to Experimental menu since this module has yet not reached a stable
+         status (ie. 1.0).
+-11-22  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/svgmapwriter.py:
+         Added verbose variable and some logging depending on it.
+         (class VirtualDC(XMLWriter)): Minor improvement in the polygon loop,
+         because counting i is not necessary.
+         (class Pen, class Brush): Added simple __str__ methods.
+         (SVGRenderer.draw_polygone_shape): Fix #2698 (transparent polygons are
+         not exported to svg file) Note: holes still unhandled.
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+                 Made a baseclass TestWithDC for test needed a DC.
+                 Added tests for bug #2698 (transparent polygons are not
+                 exported to svg file):
+                 Testobjectexport.test_transparent_polygon()
+         * Thuban/Model/base.py (UnsetModified):
+         Fixed some typos in docstring.
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_polygon_shape()):
+         Added hints on the used algorithm for handling holes.
+-11-20  Jan-Oliver Wagner <[email protected]>
+         Some face lifting for the examples.
+         * Examples/__init__.py: Make this directory a package.
+         * Examples/simple_extensions/__init__.py: Make this directory a package.
+         * Examples/simple_extensions/hello_world.py: Moved entry from Extensions
+         menu to Examples menu.
+         * Examples/simple_extensions/simple_command.py: Some more comments,
+         minor changes.
+         * Examples/simple_extensions/simple_tool.py: Minor changes.
+-11-20  Jan-Oliver Wagner <[email protected]>
+         Changed way of extension registry for wms and added extension
+         registry for umn_mapserver extension.
+         * Extensions/wms/__init__.py: Added registry entry and the importing
+         of the actual wms module. Included a test for the required PyOGCLib.
+         * Extensions/wms/wms.py: Removed registry entry (moved to __init__.py).
+         * Extensions/umn_mapserver/__init__.py: Added registry entry and the
+         importing of the actual umn mapserver management modules.
+         Included a test for the required Python MapScript.
+-11-20  Jan-Oliver Wagner <[email protected]>
+         Changed way of extension registry for importAPR, bboxdump
+         and added extension registry for svgexport.extension registry for
+         svgexport.
+         * Extensions/importAPR/__init__.py: Added registry entry and the importing
+         of the actual importAPR module.
+         * Extensions/importAPR/importAPR.py: Removed registry entry (moved to
+         __init__.py).
+         * Extensions/bboxdump/__init__.py: Added registry entry and the importing
+         ����of the actual bboxdump module.
+         * Extensions/bboxdump/bboxdump.py: Removed registry entry (moved to
+         ����__init__.py).
+         * Extensions/svgexport/__init__.py: Added registry entry and the importing
+         of the svgsaver module.
+         * Extensions/svgexport/svgsaver.py: Moved the menu entry from Extensions
+         to Experimental menu since this module has yet not reached a stable
+         status (ie. 1.0).
+-11-18  Jan-Oliver Wagner <[email protected]>
+         Now the hit test considers the size of point symbols.
+         * Thuban/UI/viewport.py (ViewPort._hit_point): Added optional parameter
+         'size' defaulting to the previously fixed value 5.
+         Extended doc-string.
+         (Viewport._find_shape_in_layer): Resolved FIXME regarding flexibility
+         for symbols.
+         Now the size of the largest point symbol is determined to find out
+         about whether the point has been hit.
+         This fixes the problem that only clicks inside a fixed distance of
+where found.
+-11-17  Jan-Oliver Wagner <[email protected]>
+         Another open issue fixed regarding sizeable symbols: correct rendering of
+         selected symbols.
+         * Thuban/UI/renderer.py (ScreenRenderer.draw_selection_incrementally):
+         Added consideration of the specific size of point symbols.
+         The property for each point symbol is retrieved and the size applied
+         for the rendering method.
+         Added doc-string.
+-11-16  Jan-Oliver Wagner <[email protected]>
+         Changed way of Extension Registry for gns2shp and profiling.
+         * Extensions/gns2shp/gns2shp.py: Removed registry entry (moved to
+         __init__.py).
+         * Extensions/gns2shp/__init__.py: Added registry entry and the importing
+         of the actual gns2shp module.
+         * Extensions/profiling/profiling.py: Removed registry entry (moved to
+         __init__.py).
+         * Extensions/profiling/__init__.py: Added registry entry and the importing
+         of the actual profiling module.
+-10-28  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/: Minor improvements to doc strings.
+-10-07  Jan-Oliver Wagner <[email protected]>
+         Further elements for sizable point objects now
+         making this feature usable though not yet complete.
+         * Thuban/Model/save.py (SessionSaver.write_classification): Write
+         attribute 'size' for cldata when the shape layer is of point type.
+         This also now make the test_load.py tests happy.
+         * Thuban/Model/classgen.py (CustomRamp.GetProperties): Added size
+         gradient.
+         * Thuban/UI/classifier.py (ID_SELPROP_SPINCTRL): Renamed to
+         ID_SELPROP_SPINCTRL_LINEWIDTH.
+         (ID_SELPROP_SPINCTRL_LINEWIDTH): New Id replaces ID_SELPROP_SPINCTRL.
+         (ID_SELPROP_SPINCTRL_SIZE): New Id.
+         (SelectPropertiesDialog.__init__): Added a second spin control
+         for the size in case the corresponding layer is of point type.
+         (SelectPropertiesDialog._OnSpin): Renamed to _OnSpinLineWidth.
+         (SelectPropertiesDialog._OnSpinLineWidth): New. Former _OnSpin.
+         (SelectPropertiesDialog._OnSpinSize): New. Set size of property
+         and refresh preview.
+-10-04  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_parser.py
+         (TestWMSCapabilitiesParser.test_compareLists): Added missing
+         self-test for compareLists()
+         (TestWMSCapabilitiesParser.test_compareDicts): Added missing
+         self-test for compareDicts()
+         (TestWMSCapabilitiesParser.test_compareLists): Adding more tests
+         to verify the test routine fails with non-equal arguments
+         (TestWMSCapabilitiesParser.test_compareDicts): Adding more tests
+         to verify the test routine fails with non-equal arguments
+-10-03  Jan-Oliver Wagner <[email protected]>
+         First elements for sizeable point objects.
+         * Resources/XML/thuban-1.1.dtd: Added size attribute to cldata.
+         * Data/iceland_sample_size.thuban: New. Sample for sized point objects.
+         * test/test_load.py (ClassificationTest.TestLayers): Added SetSize in case
+         of a corresponding argument is given.
+         (TestSymbolSize): New. Test the size attribute of cldata.
+         * Thuban/Model/classification.py: Removed some trailing whitespaces.
+         (ClassGroupProperties.__init__): Set default size.
+         (ClassGroupProperties.SetProperties): Set the size.
+         (ClassGroupProperties.GetSize): New. Return the size.
+         (ClassGroupProperties.SetSize): New. Set the size.
+         (ClassGroupProperties__eq__): Compare also size.
+         (ClassGroupProperties__repr__): Print also size.
+         * Thuban/Model/load.py (SessionLoader.start_cldata): Also parse
+         the size attribute.
+         * Thuban/UI/classifier.py (ClassDataPreviewer.Draw): Added doc-string.
+         Also, now there is a return value that indicates whether the drawing
+         size exceeded the given rect extent and if so the new extent.
+         Finally, point objects are drawn depending on the size. If either
+         the width or height is exceeded, the new extent is returned.
+         (ClassRenderer.Draw): Now when calling the previewer drawing function,
+         evaluate the return value and, if not None, adapt the grid widget size
+         accordingly and redraw again.
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_shape_layer_incrementally):
+         If the draw function is for points, call it with the size as additional
+         parameter.
+         (BaseRenderer.draw_point_shape): Added additional, optional parameter for
+         the size. Compute the radius using the size.
+         * Extensions/importAPR/apr.py (APR_BMkSym.GetThubanProp): Now
+         that Thuban supports size, apply this correctly.
+         * Extensions/importAPR/importAPR.py: Bumped version to 0.1.1.
+-10-03  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual-de.xml: Started translation of
+         Map chapter.
+-10-01  Martin Schulze  <[email protected]>
+         * Extensions/wms/properties.py (wmsProperties.__init__): Extended
+         argument for general use through properties-dialog selector
+         * Thuban/UI/classifier.py: Register properties dialog classes for
+         both provided layer classes/types.
+         * Thuban/UI/mainwindow.py (MainWindow.OpenLayerProperties): The
+         map can be retrieved through the parent which is passed to the
+         constructor anyway and doesn't require an argument of its own,
+         required for the unification of arguments for general use through
+         properties-dialog selector.
+         (MainWindow.OpenOrRaiseDialog): Move the logic for checking
+         whether a dialog is already opened (and raising it to the users
+         attention) and creating a new dialog into a function of its own
+         (MainWindow.OpenLayerProperties): Use the new OpenOrRaiseDialog()
+         method
+         (MainWindow.OpenLayerProperties): Utilise the new ClassMapper for
+         global registration of properties dialog classes (which are indeed
+         layer-specific).
+         * Thuban/UI/classifier.py (Classifier.__init__): Unify arguments
+         for general use through properties-dialog selector, the map can be
+         retrieved through the parent and doesn't require an argument of
+         its own.
+         * Extensions/wms/wms.py: Register the properties dialog class for
+         the provided WMS layer
+-09-28  Jan-Oliver Wagner <[email protected]>
+         New feature: Registry for Extensions.
+         * Thuban/UI/extensionregistry.py: This module defines a registry for
+         Extensions.
+         * Thuban/UI/about.py (About.__init__): Added description
+         of the registered extensions with all of the information.
+         * Thuban/Model/extension.py (Extension): Improved doc-string.
+         * Extensions/gns2shp/gns2shp.py, Extensions/importAPR/importAPR.py,
+         Extensions/bboxdump/bboxdump.py, Extensions/profiling/profiling.py,
+         Extensions/wms/wms.py: Added registration of the extension.
+-09-27  Bernhard Reiter <[email protected]>
+         More fixes to svgexport to make used ids unique and
+         conforming to XML's Name production.
+         * Extensions/svgexport/test/test_svgmapwriter.py: Added new tests
+         test_xml_id_constraints(), test_make_ide_nosetbaseid() and
+         test_make_id_nonintegersetid().  Switched SetID and SetBaseID.
+         Added Bernhard R. as author.
+         * Extensions/svgexport/svgmapwriter.py (make_id): Using "_" as
+         concatenation char now (makes test_make_ide_nosetbaseid() valid).
+         Also transform second id part with "%d" and catch the TypeError
+         to raise SVGMapWriterError (making test_make_id_nonintegersetid() ok).
+         Corrected typo inBernhard's author line.
+         (SetBaseID): Return the transformed base id. Transform characters
+         which are not alnum() or in ".-_" to binascii.b2a_hex(). Added
+         import binascii. If to be set string starts with "xml" or so, add "t".
+         (draw_shape_layer_incrementally): use the returned value of SetBaseID
+         for used_baseids checks.
+-09-25  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.test_arc_layer_with_projection):
+         Remove a debug print and some tab characters.
+-09-25  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/svgmapwriter.py: Added Bernhard R. as Author.
+         (SetBaseID, SetID, make_id): Improved docstring comments to explain
+         the interaction of the three functions and the XML id contrains.
+-09-23  Jan-Oliver Wagner <[email protected]>
+         * Doc/ThubanModel.xmi: New. UML file for Thuban Model
+         Module.
+         * Doc/README: Added info on ThubanModel.xmi.
+-09-23  Jan-Oliver Wagner <[email protected]>
+         * Doc/README: New. Some info about how to generate technical
+         documentation from the source code.
+         This text was send to the Thuban developer mailing list on
+         September 21st 2004 by Bernhard Reiter.
+-09-21  Bernhard Reiter <[email protected]>
+         Improved the svgexport to only use unique ids. Will issues
+         an error message dialoge when two layer names are the same.
+         ShapeIDs are now added with a dash within the svg ids.
+         * Extensions/svgexport/svgmapwriter.py (SVGMapWriterError): New.
+         * Extensions/svgexport/test/test_svgmapwriter.py: Added imports
+         (TestSVGRenderer): New test class with test_make_in() and
+         test_check_for_layer_name_clash()
+         * Extensions/svgexport/svgmapwriter.py (SVGRenderer): Fixed __init__()
+         and draw_shape_layer_incrementally() to not use a baseid twice,
+         satisfying test_check_for_layer_name_clash()
+         (VirtualDC.make_id): Use a dash between baseit and id, satisfies
+         test_make_in().
+         * Extensions/svexport/svgsaver.py: Import SVGMapWriterError, wxOK
+         and wxICON_HAND.
+         (write_to_svg): Put dc and rendering in a try statement and on
+         catching SVGmapWriterError notify the user and delete the target file.
+-09-20  Bernhard Reiter <[email protected]>
+         * Model/base.by, Model/layer.py: Fixed typos in docstrings.
+-09-03  Jan Sch�ngel  <[email protected]>
+         * Extensions/umn_mapserver/mapfile(MF_Class.add_thubanstyle): Fix a
+         small bug with the line color. Now the line color will now only set
+         if it is set in Thuban an not Transparent.
+         * Extensions/umn_mapserver/mf_export(tblayer_to_map): Fixed a bug with
+         deleting the layers from mapfile. Now all layers will delete backwards
+         from the last.
+-08-20  Silke Reimer <[email protected]>
+         * Thuban/Model/layer.py:
+         Fixes bug in projection handling: Otherwise very large region might not
+         have valid values in the layer's projection.
+-08-20  Silke Reimer <[email protected]>
+         * Thuban/UI/about.py:
+         small changes to be consistent with coding style.
+-08-13  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_ogclib.py (TestOGCLib.compare_URLs):
+         Adjusted a comment
+-08-11  Silke Reimer <[email protected]>
+         * Thuban/UI/about.py: Small changes to encoding related stuff to avoid
+                 too many and too enhanced imports of locale
+-08-10  Silke Reimer <[email protected]>
+         * Thuban/UI/about.py: Fixed encoding problem of about dialog: Added
+                 function unicodeToLocale() to convert special characters to users
+                 locale encoding
+-08-10  Jan-Oliver Wagner <[email protected]>
+         * Doc/technotes/coding_guidelines.txt: Added rule 'Method names start with
+         lower case letter'
+-08-09  Jan Sch�ngel  <[email protected]>
+         * ChangeLog: Rewrite the last ChangeLog entry to follow
+         the standard way.
+         * Extensions/umn_mapserver/mapfile: Moved the import AnnotationLayer to
+         the function where it is needed, because it don't works if it stands
+         at the beginning.
+         (MF_Layer.__init__): Removed the extra numclassed variable. Now
+         numclasses from the mapscript will be used.
+         (MF_Layer.get_index): New. Return the index of the layer in mapfile.
+         (MF_Layer.set_classes): New. A Classlist will be set to the layer.
+         (MF_Layer.set_metadata): New. A Metadata mapscript object will set.
+         (MF_Layer.remove_allclasses): New. All class of the layer will remove.
+         (MF_Map.create_new_layer): New. A new Layer is created and associated
+         with the mapscript object.
+         (MF_Map.set_layerorder): New. The Layer order like in thuban is set in
+         the mapscript.
+         (MF_Map.add_thubanlayer): Now a new layerobj is created if no one is
+         linked to the layer in thuban, else the layerobject linked to the
+         thubanlayer will be used.
+         AnnotationLayer will now store the filename of the shapefile.
+         (MF_Map.remove_layer): If a layer is removed the associated object
+         must be set new.
+         * Extensions/umn_mapserver/mf_export.py(tb_layer_to_map): Add all
+         layers which are exists in thuban to the mapobj. All removed Layers
+         will be removed from the mapobj.
+         Added comments to all functions.
+         (thuban_to_map): No layer will be removed here.
+         * Extensions/umn_mapserver/mf_handle.py
+         (_has_umn_mapobj_and_selectedlayer): Activating the layer menu. Now
+         Layersettings for the mapserver kann be edited.
+         * Extensions/umn_mapserver/mf_import.py: Now all layers which are
+         imported, will be linked with the associated MF_Layer.
+         (import_mapfile): All layers, which are not selected, will be removed.
+         Disable the "import layer from mapfile" menu option.
+         * Extensions/umn_mapserver/sample/iceland.map: Set the status of the
+         Annotation Layer from DEFAULT to OFF. The DEFAULT setting turns the
+         layer on permanently.
+-08-03  Jan Sch�ngel  <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py(MF_Metadata.remove_allmetadata):
+         New. This function removes all metadata
+         (MF_Layer.set_group): New. Set the group setting.
+         (MF_Layer.get_group): New. Get the group setting.
+         (MF_Map): Removed the extra numlayers variable, used the mapscript
+         parameter instead.
+         (MF_Map.get_numlayers): New. This get numlayers.
+         (MF_Map.remove_all_layers): New. Removes all layers from the mapobj.
+         (MF_Map.add_thubanlayer): Replaced the exception handling by a check
+         if the object is an instance. Also added the annotation layer here to
+         export, but only the layer is created in the mapfile.
+         * Extensions/umn_mapserver/mf_export.py(export_mapfile): Removed
+         the check if a mapobj exist, because its not needed anymore. The
+         export function is only available if a mapobj exist.
+         Use the new function to remove all layers.
+         * Extensions/umn_mapserver/mf_handle.py(Layer_Dialog): Added a group
+         option and the metadata button. The layer dialog is temporary disabled.
+         (Metadata_CustomDataTable): Added some functions to show the grid
+         correct.
+         * Extensions/umn_mapserver/mf_import.py: Moved the code for showing
+         the number of layer from import_mapfile to this function.
+         (AnnotationLayer): New. This Class shows the Annotation layer in
+         thuban. The layer don't do anything. It's only to show the layer
+         and to save the layer order.
+         (add_annotationlayer): New. Import an annotation layer to thuban.
+         (select_layer2import): New. Import only layers to thuban and not
+         the other settings like projection or scalebar.
+         (create_new_mapfile): Moved the _has_umn_mapobj function and the
+         create_new_mapfile functions from mf_handle.py to mf_import.py.
+         * Extensions/umn_mapserver/sample/iceland.map: Added the group
+         parameter to the roads and cultural layers. Also added a new
+         Annotation Layer for the cultural points.
+         * Extensions/umn_mapserver/sample/iceland.html: Added the select
+         option for the annotation layer.
+         * Extensions/umn_mapserver/sample/index.html: Added the start
+         parameter for the annotation layer.
+-08-01  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual-de.xml (Chapter Session Management):
+         translation completed.
+         * Doc/manual/thuban-manual.xml (Chapter Session Management):
+         Fixed unprecise description for Save Session.
+-07-31  Jan-Oliver Wagner <[email protected]>
+         Started translation of Users Manual into german.
+         * Doc/manual/thuban-manual-de.xml: New. German Users Manual.
+         * Doc/manual/Makefile: Added build instructions for german
+         users manual.
+         * Doc/manual/thuban-manual.xml: Minor corrections in Introduction.
+-07-28  Jan Sch�ngel  <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py(MF_Metadata): Changed all class
+         functions. Now all metadata will handle by the function and its not
+         needed to initialize it from outside. Therefor the associated mapobj
+         will be stored in the Metadata Object. So we can use the special
+         functions from the associated mapobj to get the Metadata.
+         Therefor all initialization code for the metadata is removed from the
+         other classes.
+         (MF_Layer): Added a function to get the metadata object.
+         (MF_Map): Added a function to set the mappath, the path where
+         the mapfile ist stored.
+         * Extensions/umn_mapserver/mf_export.py(thuban_to_map): Changed the code
+         to set the extent in the mapfile. Now the code is set by the displayed
+         data in the Thuban-view.
+         (export_mapfile): The shapepath is now set empty, until relative
+         pathnames are supported.
+         * Extension/umn_mapserver/mf_handle.py: Added a dialog to handle
+         metadata. Yet only mapfile metadata are supported. Layer and class
+         supported are not implemented.
+         Added a dialog to handle layer informations. The dialog only shows the
+         selected layer at the moment.
+         * Extensions/umn_mapserver/mf_import.py(import_mapfile): Changed the
+         code for setting the extent in thuban. Now the extent is set to the
+         given extent from the mapfile.
+         Fixed a logical mistake. Now the extent is set when realy a layer is
+         loaded, and not if one is selected to load.
+         * Extensions/umn_mapserver/sample/iceland.html: Added code to zoom and
+         move the shown map in the browser.
+         * Extensions/umn_mapserver/sample/iceland.map: Added a new metadata
+         line to the mapobj and added metadata to the political layer.
+         * Extensions/umn_mapserver/test/test_mapserver.py: Changed the test
+         for Metadata.
+-07-26  Martin Schulze  <[email protected]>
+         * Thuban/Lib/classmapper.py (ClassMapper.has): Added the new
+         ClassMapper
+         * test/test_classmapper.py (TestMapping.test_mapper): Added a Test
+         case for the new ClassMapper
+-07-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py (ViewPort.VisibleExtent): New.  Return the
+         visible extent of the map in projected coordinates
+         * test/test_viewport.py (SimpleViewPortTest.test_default_size)
+         (SimpleViewPortTest.test_init_with_size): Add some VisibleExtent()
+         tests.
+         (SimpleViewPortTest.test_visible_extent): New. The real test for
+         VisibleExtent()
+-07-22  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py: Use support.run_tests as the main
+         function when running asa script.
+-07-22  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mf_export.py: Added "import os"
+         Removed the old "import Thuban.UI.mainwindow" code.
+         (tbextent_to_map): Removed the extra function and at the code direct
+         to "thuban_to_map" function.
+         (write_creatorcomment): Added. Now a short comment is added to the
+         beginning of an generated mapfile.
+         (export_mapfile): Now the Path and filename are saved in to variables,
+         and not together in one variable. This is needed for the new
+         write_creatorcomment function.
+         * Extensions/umn_mapserver/mf_import.py (import_mapfile): Added the
+         import module "re". Also added Range and the ClassGroupRange import
+         from Thuban. Both are needed for the new range expression import.
+         (create_rangeexpression): Added. Creates a Range Expression in Thuban
+         style from a given mapfile expression.
+         (added_rasterlayer): Make some small code changes. The shapepath is
+         now stored in an extra variable and the clazz_name is set empty if no
+         class name set in the mapfile.
+         Changed the Error message for Range Expressions, becaus the new
+         function create a error string which will be shown in the dialog.
+         * Extensions/umn_mapserver/test/test_mapserver.py: Added a test for the
+         range expression import.
+-07-21  Jan-Oliver Wagner <[email protected]>
+         * Extensions/umn_mapserver/README: Added hint that
+         installation as root can be avoided. Removed all tabs.
+-07-16  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py
+         (ViewPortTest.test_changing_map_projection): Check that changing
+         the projection of an empty map shown in a viewport doesn't lead to
+         exceptions in the viewport's handler for the
+         MAP_PROJECTION_CHANGED messages
+         * Thuban/UI/viewport.py (ViewPort.map_projection_changed): Only
+         try to keep the same region visible when the map actually contains
+         something
+-07-15  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py: Added a function to get the
+         mappath directly from the mapobj. Is needed because of the changes
+         in mf_import.py.
+         (MF_Layer.add_thubanclass): Added a new comment.
+         (MF_Map.set_extent): Fixed a bug with exporting empty mapobj. If the
+         mapobj is empty there is no extent get from thuban an so no one can
+         set to th mapobj.
+         * Extensions/umn_mapserver/mf_import.py (import_mapfile): Updated
+         the discription.
+         Split the funktion in to three smaller ones. The new functions are
+         add_rasterlayer, add_polygonlayer and select_layer2import.
+         Removed the mapfilepath and filepath initialisation, because its know
+         include in the new functions.
+         Now nothing will be imported if cancel is pressed in the
+         layer choice dialog.
+-07-14  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py: Added ClassGroupDefault to
+         import.
+         (MF_Symbolset): Removed the extra variable for numsymbols.
+         (MF_Class.__init__): Added a comment to the exception clause.
+         Removed the extent init, because it was not needed anymore.
+         (MF_Layer.add_thubanclass): Added the code to set the class name to
+         the expression value from thuban if no label is defined.
+         Added the code to export Range expressions from thuban to the mapfile.
+         (MF_Map.set_extent): Removed the exception and replace it by some if
+         code. If the size of a map is not defined the size will be set to 1,1.
+         This is necessary because if the extent is set, mapscript checks if
+         the size is greater than zero.
+         (MF_Web): Added the get and set function for the template.
+         * Extensions/umn_mapserver/mf_export.py: Added the function to check
+         if a mapobject exists and used it to set the status of the menu items.
+         If no mapfile exists the settings could not be edditied.
+         Define after which menuitem the exportitem will include.
+         * Extensions/umn_mapserver/mf_handle.py: Removed the import
+         Thuban.UI.mainwindow clause, because it is not needed.
+         Added the command Refresh() to all "OnChangeColor()" functions,
+         because the color preview window was not updated on a color change.
+         Added the function to check if a mapobject exists and used it to set the
+         status of the menu items. If no mapobject exists the settings could not
+         be edditied.
+         (Map_Dialog): Moved the imagetype selector from the
+         Outputformat_Dialog to Map_Dialog and removed Outputformat_Dialog.
+         (Web_Dialog): Removed the name label and added the template textbox.
+         * Extensions/umn_mapserver/mf_import.py (import_mapfile): Replace
+         the exception handling on loading the layers by an if statement. It
+         is not necessary to us the exception there.
+         The Filepath creation now use os.path.join to build the path.
+         * Extensions/umn_mapserver/test/test_mapserver.py: Moved the testMap
+         definition from global to the setUp function. Now the testMap will
+         initialize new on each test.
+         * Extensions/umn_mapserver/sample/iceland.map: Include three new
+         classes in the Line Layer, to test logical Expressions.
+         Set the status of the class "Point9" in the Point Layer to off
+-07-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.render_map_incrementally): Fix a logic bug in the
+         optimization that tries not to draw layers under a raster layer.
+         The bug was harmless.  All it effectively did was to produce The a
+         strange messages about not being able to draw Layer instances for
+         all vector layers below a raster layer which would be invisible
+         anyway because the raster layer currently always covers the entire
+         window
+-07-08  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py: Added code to generade and get
+         a list of supported outputformats. This formats are not alle supported
+         because there is no possibility to get the outputformat without the
+         name known. Make some formal changes to the code.
+         (MF_Map.set_name()): Fixed a bug if the name is None.
+         * Extensions/umn_mapserver/mf_handle.py: Removed the image_type import
+         statement, because its not needed anymore. The Outputformat is now
+         given as string from the object. Make some formal changes to the code.
+         * Extensions/umn_mapserver/test/test_mapserver.py: Added new test for
+         most of the new setting which were added during the last changes.
+         Removed the MF_Size Test.
+         * Extensions/umn_mapserver/test/test.map: Added a new class to the
+         cultural Layer to test expressions and the the status of that layer
+         from on to default.
+         Changed the data path the the correct Thuban Data
+         Added the Outputformat Object and Symbol Object
+-07-07  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py: Added some new
+         settings to edit (outputformat, label, imagetype)
+         * Extensions/umn_mapserver/mf_handle.py: Added some setting to
+         the Label Dialog and add the OutputDialog.
+         Make some changes to the code order.
+-07-06  Jan Sch�ngel <[email protected]>
+         * Extensions/umn_mapserver/mapfile.py: Added the symbolObj, pointObj
+         and line Obj and add the scalebar_status_type, scalebar_style_type and
+         scalebar_position_type.
+         Added the symbol- and symbolsetObject (MF_Symbol,MF_Symbolset). The
+         are only used to create a Symbol like the circle in Thuban.
+         Added the scalebarObject (MF_Scalebar)
+         (MF_Class): Added set_status and get_status.
+         (MF_Layer.add_thubanclass): Added code to set the class status
+         (MF_Map): Added code to handle the symbols and scalebar
+         (MF_Label): Added the set_partials and get_partials functions
+         * Extensions/umn_mapserver/mf_export.py: Added MF_Symbol to import
+         from mapfile. Added a function to create a circle object like the one
+         from thuban if no one exists.
+         * Extensions/umn_mapserver/mf_handle.py: All colors are now set when
+         press ok in the assosiated dialog and not at the end of the
+         colordialog.
+         Added the Dialog for the Scalebar.
+         (Label_Dialog): Added the offset option
+         * Extensions/umn_mapserver/mf_import.py: Added code to import the
+         status of the Classes.
+         Fixed a bug with the projection. Now the to_meter parameter will be
+         added to the Projection only if it doesn't exists.
+-07-01  Jan Sch�ngel <[email protected]>
+         Added the functionality to handle the content thuban is not
+         able to handle directly.
+         * Extensions/umn_mapserver/mf_handle.py: New. This module extents
+         Thuban with the possibility to edit the mapfile content.
+         * Extensions/umn_mapserver/mf_import.py: Added the possibility
+         to import mapfiles without any layer selected. So it is possible
+         to edit the other settings in a mapfile.
+         (import_mapfile): Added code to use the editing functions.
+         Added the possibility to import the projection to a layer if one
+         is defined.
+         Status settings (On,Off) will now set in thuban (visible, invisible).
+         fixed a bug with with classnames. If no classname is set in mapfile
+         the value in Thuban will set to the expression.
+         * Extensions/umn_mapserver/mf_export.py(export_mapfile): Added the
+         possibility to save a new mapfile or use the old one which is
+         imported or new created.
+         Added code to use the editing functions.
+         Remove some not needed import statements
+         * Extensions/umn_mapserver/mapfile.py: Added new types which are
+         need for the editing functions.
+         Added needed set-functions for the editing functions.
+         Added the possibility to export rasterimages.
+         Added new classes (MF_Web, MF_Label, MF_Legend, MF_Symbol,
+         MF_SymbolSet). MF_Symbol and MF_SymbolSet are not needed at the
+         moment.
+         (MF_Class.set_thubanstyle): Now point layers will set to a default
+         symbol to show a circle in mapserver and not only a 1px dot.
+         (MF_Style.__init__): Fixed a bug with the color. Color was not set
+         correct before.
+         (MF_Size): Removed, because it is not needed.
+         * Extensions/umn_mapserver/README: Added the hints to use the
+         export and editing functions, too.
+         * Extensions/umn_mapserver/sample/iceland.map: Added the
+         new parameter "UNITS METERS".
+         Change the political layer to status OFF.
+         * Extensions/umn_mapserver/sample/README: Added some
+         more details to setup the sample in the MapServer.
+-06-26  Bernhard Reiter <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py:
+         Removed class VFile and used standard StringIO instead.
+-06-23  Jan Sch�ngel  <[email protected]>
+         Add the export function to the umn_mapserver extension.
+         * Extension/umn_mapserver/mf_export.py: New. This module extents
+         Thuban with the possibility to export the Thuban content.
+         * Extensions/umn_mapserver/mapfile.py: Expand the classes to use
+         with the export module. Especially added the possibility to
+         add thuban objects directly to the map objects.
+         * Extensions/umn_mapserver/mf_import.py: Removed the wxCHANGE_DIR,
+         because of the hint from Bernhard Herzog.
+         Corrected the handling of absolute pathnames.
+         Changed the Text of the Menu-Item, now the beginning is upper case.
+         * Extensions/umn_mapserver/README: Added the --with-tiff statement.
+-06-16  Jan Sch�ngel  <[email protected]>
+         Add a sample and make some changes.
+         * Extension/umn_mapserver/mf_import.py: Changed the wxPython.wx
+         import from * to explicit used statements. Changed the
+         Thuban.UI.mainwindow import phrase, too.
+         (import_mapfile):Corrected a clerical mistake.
+         Added wxCHANGE_DIR in OpenFile Dialog.
+         Added a MultipleChoiceDialog, to select the layers to load from
+         mapfile into thuban. Thereby the projection is only set if one layer
+         is selected.
+         Added the possibility to handle relative pathnames which uses
+         up-level references.
+         Removed some doubled code.
+         Corrected an error with integer values used as label in thuban
+         ClassGroup.
+         * Extensions/umn_mapserver/sample: New.
+         * Extensions/umn_mapserver/sample/README: New. Describes the
+         usage of the sample files.
+         * Extensions/umn_mapserver/sample/iceland.map: New. This is
+         a suitable .map-file for the iceland data.
+         * Extensions/umn_mapserver/sample/index.html: New. The template
+         for the mapfile.
+         * Extensions/umn_mapserver/sample/iceland.html: New. Initialisation
+         file for the Iceland Application on web.
+         * Extensions/umn_mapserver/README: Corrected a inaccuracy and added
+         some details.
+         * Extensions/umn_mapserver/test/test_mapserver
+         (mapserver_import_Test_generalClasses.test_MF_Color):
+         Corrected the thubancolor test.
+-06-15  Jan Sch�ngel  <[email protected]>
+         * Extensions/umn_mapserver/README: New. Install instruction.
+-06-14  Bernhard Reiter <[email protected]>
+         * libraries/thuban/cpl_mfile.h: Added copyright header.
+         * libraries/thuban/ cpl_mfile.cpp, cpl_mfile.h: Added non-protecting
+         Free Software License so that it is most useful with gdalwarp
+         and bmpdataset.
+-06-14  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/multiplechoicedialog.py (__version__): Add missing
+         import of wxPython.wx itself (as opposed to the contents of
+         wxPython.wx).  For some reason wxPython.wx is available as
+         wxPython.wx.wx in at least some 2.4 releases.  Fixes RT#2482
+         wrt. wxPython 2.4.
+-06-10  Jan Sch�ngel  <[email protected]>
+         Initial version of new extension "umn_mapserver".  This extension aims
+         to manage configuration for the UMN MapServer application.  This
+         inital version just imports the .map-files and displays all, Thuban is
+         capable of.
+         * Extensions/umn_mapserver, Extensions/umn_mapserver/test: New.
+         * Extensions/umn_mapserver/test/README: New. Describes how to run the
+         tests.
+         * Extensions/umn_mapserver/test/test.map: New. This is a test
+         .map-file for automated tests of the umn_mapserver extension of
+         Thuban.
+         * Extensions/umn_mapserver/test/test_mapserver.py: New. Tests for
+         UMN Mapserver classes.
+         * Extensions/umn_mapserver/__init__.py: New. Init to make this
+         directory a package.
+         * Extensions/umn_mapserver/mapfile.py: New. Classes to represent
+         '.map'-file objects.
+         * Extensions/umn_mapserver/mf_import.py: New. This module extends
+         Thuban with the possibility to handle UMN MapServer mapfiles.
+-06-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.TreeInfo): Convert the bounding box
+         to a tuple before using it as arguments to the % operator.  This
+         fixes the formatting issue filed in RT#2239 on 2004-01-13 and
+         reported today on thuban-list by Jan Sch�ngel
+         * test/test_layer.py (TestLayerModification.setUp): Save the
+         filename as an instance variable so we can refer to it in tests
+         (TestLayerModification.test_tree_info): Uncomment this method
+         again and make it work.  This tests for the formatting issue
+         filed in RT#2239 on 2004-01-13
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py: Fix some typos.
+-05-18  Jan-Oliver Wagner <[email protected]>
+         * Extensions/gns2shp/gns2shp.py (gns2shp): Fixed a bug
+         by increasing a field size.
+-05-17  Bernhard Herzog  <[email protected]>
+         Update to newest shapelib and get rid of Thuban specific
+         extensions, i.e. use the new DBFUpdateHeader instead of our
+         DBFCommit kludge
+         * libraries/shapelib/shpopen.c: Update to version from current
+         shapelib CVS.
+         * libraries/shapelib/shapefil.h: Update to version from current
+         shapelib CVS.
+         * libraries/shapelib/dbfopen.c: Update to version from current
+         shapelib CVS.
+         (DBFCommit): Effectively removed since shapelib itself has
+         DBFUpdateHeader now which is better for what DBFCommit wanted to
+         achieve.
+         We're now using an unmodified version of dbfopen.
+         * setup.py (extensions): Add the HAVE_UPDATE_HEADER macro with
+         value '1' to the Lib.dbflibc extension.  This simply reflects the
+         shapelib and pyshapelib updates
+-05-16  Jan-Oliver Wagner <[email protected]>
+         Finished introduction of Menu.FindOrInsertMenu.
+         * Extensions/drawshape/drawshape.py: Add the command
+         to the experimental menu additionally to the toolbar.
+         * Extensions/svgexport/svgsaver.py: Use FindOrInsertMenu() instead of
+         finding menu on its own.
+         * Doc/manual/thuban-manual.xml: updated sample file
+         to use FindOrInsertMenu().
+         * Examples/simple_extensions/hello_world.py: Use FindOrInsertMenu()
+         instead of finding menu on its own.
+-05-11  Jan-Oliver Wagner <[email protected]>
+         * test/test_menu.py (MenuTest.test): Added testing
+         of method Menu.FindOrInsertMenu.
+-05-10  Jan-Oliver Wagner <[email protected]>
+         Introduce and use Menu.FindOrInsertMenu.
+         * Thuban/UI/menu.py (Menu.FindOrInsertMenu): New. Find a
+           given menu or, if not found, insert it.
+         * Extensions/bboxdump/bboxdump.py, /Extensions/gns2shp/gns2shp.py,
+         /Extensions/importAPR/importAPR.py, Extensions/profiling/profiling.py,
+         /Extensions/wms/wms.py: Use FindOrInsertMenu() instead of finding
+         menu on its own.
+-05-06  Jan-Oliver Wagner <[email protected]>
+         Introduce a abstract ColorDialog class and remove
+         and outdated file.
+         * Thuban/UI/proj4dialog.py: Removed. It is has been
+         replaced by projdialog for quite a while and is not used
+         anymore.
+         * Thuban/UI/colordialog.py: New. Abstraction for color selection
+         dialog(s).
+         * Thuban/UI/classifier.py (SelectPropertiesDialog.__GetColor):
+         Now calls the abstract ColorDialog instead of wxColourDialog.
+         This also removed the dependency to Color class conversion
+         from this function.
+-05-04  Frank Koormann  <[email protected]>
+         * Extensions/bboxdump/__init__.py: Fixed string left over from
+         copying.
+         * Extensions/bboxdump/bboxdump.py (bboxdump):
+         Use layer.ShapeStore().AllShapes() to loop over shapes instead of
+         xrange(layer.NumShapes()). Compile the bboxmessage from a list
+         of formatted outputs (string.join) instead of appending to the
+         message. Two progress bar dialogs to report progress on the sometimes
+         lenghty processing.
+-04-22  Frank Koormann  <[email protected]>
+         New Extension to dump bounding boxes of all shapes of the selected
+         layer. An optional column can be specified to group the objects,
+         in this case the bounding box is a union of the separate boxes.
+         Dump can be displayed in a ScrolledMessageDialog or written to file.
+         The Extension is simply a combination of available and well tested
+         Thuban functionality.
+         * Extensions/bboxdump/__init__.py: New: Init to make this
+         directory a package.
+         * Extensions/bboxdump/bboxdump.py: New: Dump bounding boxes of
+         all shapes of the selected layer.
+-04-22  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/classgen.py (GenUniquePanel.__init__): Fixed two
+         strings to be i18n now.
+-04-18  Jan-Oliver Wagner <[email protected]>
+         Changing popup menu of legend from direct building
+         to using the Menu construction as used for the mainwindow.
+         * Thuban/UI/mainwindow.py: New method commands: layer_to_top,
+         layer_to_bottom, layer_visibility
+         (MainWindow.LayerToTop): New. Put current layer to the top.
+         (MainWindow.LayerToBottom): New. Put current layer to bottom.
+         (MainWindow.HideLayer, MainWindow.ShowLayer, _has_visible_map):
+         Replace 1,0 by True, False.
+         (MainWindow.ToggleLayerVisibility): New. Toggle visibility of
+         current layer.
+         (MainWindow.LayerShowTable): Removed raising of dialog.
+         (_has_selected_layer_visible): New. Support function.
+         * Thuban/UI/legend.py: ID_POP_xxx: removed.
+         (LegendPanel.__init__): Removed EVT_MENU bindings.
+         (LegendTree._OnRightClick): Replace direct creation of
+         menu via wx Classes by applying the menu definition
+         as of Menu class of menu.py.
+-04-16  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/exceptiondialog.py (ExceptionDialog.dialog_layout): Improved
+     button string to stronger clearify that Thuban will be closed when hitting
+         the button.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Added docstring.
+         Now for layers without a ShapeStore a corresponding message is given
+         to the user, that this layer has no table to show.
+-04-15  Martin Schulze  <[email protected]>
+         * Extensions/wms/layer.py (WMSLayer.setWMSFormat): Need to
+         recalculate the format for the internal render engine as well.
+         * Extensions/wms/properties.py (wmsProperties): First start for a
+         properties dialog.  It's functional for a first selection of
+         layers, but still has some weired wxWidgets/GTK problems but
+         beautification can be done later.
+         * Extensions/wms/layer.py: Added more documentation
+         (WMSLayer.getFormats): New: Return list of supported image formats
+         by the WMS server
+         (WMSLayer.getLayers): New: Return the list of layer names
+         supported by the WMS server
+         (WMSLayer.getLayerTitle): New: Return the title of the named layer
+         (WMSLayer.getWMSFormat): New: Return the image format that is used
+         for WMS GetMap requests
+         (WMSLayer.setWMSFormat): New: Set the image format that is used
+         for WMS GetMap requests
+         (WMSLayer.__init__): Move away from using only one layer to using
+         a list of layers (unsorted at the moment, though).
+         (WMSLayer.getVisibleLayers): New: Return the list of names for all
+         visible layers
+         (WMSLayer.setVisibleLayers): New: Set the list of names for all
+         visible layers
+         * Extensions/wms/wms.py: Moved the WMS layer into layer.py in
+         order to establish a clean structure.
+         * Extensions/wms/layer.py: Moved the WMS layer into a file on its
+         own in order to establish a clean structure.
+-04-13  Martin Schulze  <[email protected]>
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.grok): Added
+         support for oldstyle (WMS 1.0 apparently) image format
+         specification.
+         * Extensions/wms/wms.py (WMSLayer.calcFormat): Reduce the list of
+         supported graphic formats back to JPEG and BMP, PNG and others are
+         too *cough* experimental...  Sorry, I meant to filter this out
+         before I committed this part.  This should make the WMS extension
+         run from CVS again.
+         (wms_dialog): Reset an empty URL to None so that the subsequent
+         program can depend on this, since the dialog will indeed return an
+         empty URL, causing another declaration of love by Python.
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.getLayerBBox):
+         Whenever a native BoundingBox request cannot be fulfilled, check
+         whether the requested SRS is EPSG:3426, in which case return the
+         LatLonBoundingBox values.
+         * Extensions/wms/test/test_parser.py
+         (TestWMSCapabilitiesParser.test_LayerSRS): Added a test for
+         ignoring AUTO:* SRS.
+         (TestWMSCapabilitiesParser.test_LatLonBoundingBoxes_as_bboxes):
+         Added another test method to test whether the LatLonBoundingBox
+         values will be returned if BoundingBox values are requested with
+         SRS set to EPSG:3426.
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.peekLayers):
+         Added rudimentary support for non-EPSG SRS, i.e. ignore them for
+         the moment by placing them into a variable which is currently
+         unused.  Also test whether the EPSG SRS is numerical as it should
+         be and add an error message if it is not.
+         * Extensions/wms/test/sample.xml: Added AUTO:* SRS since they
+         appear in the real world as well.  Since we cannot handle them yet
+         (OGCLib can't either), we will ignore them for the moment.
+         * Extensions/wms/parser.py: Use a variable for denoting the sample
+         filename
+         (WMSCapabilitiesParser.peekLayers): Added support for error
+         messages during grok().  They will be aggregated in an array and
+         may be displayed later.  We may have to add a classification
+         "Warning" and "Error" to this.  That requires more experience,
+         though, since not every error may be lethal.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Raise the
+         ShowTable() dialog/frame when the user attempts to display it
+         while it has been opened before already and not closed again.
+-04-11  Martin Schulze  <[email protected]>
+         * Extensions/wms/infodialog.py: Adjusted the class documentation
+         * Extensions/wms/wms.py (WMSLayer.__init__, WMSLayer.GetMapImg):
+         Switch to using Thuban{Begin,End}BusyCursor instead of the pure
+         wxWidgets variants.
+         (WMSLayer.__init__): The epsg_id variable is named top_srs now.
+         * Extensions/wms/infodialog.py: Added an information dialog that
+         will display various information about the WMS current resource,
+         so that additional information such as the title, the abstract,
+         fees and access constraints can be displayed for the user if they
+         are documented in the WMS XML.
+-04-10  Martin Schulze  <[email protected]>
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.grok): Adjusted
+         string handling.  It's "foo".lower() and not lower(foo) without
+         lower imported from strings or something.
+         * Extensions/wms/wms.py (WMSLayer): Incorporated WMSCapabilities
+         from capabilities.py and parser.py.  Implement priority list for
+         supported graphics formats, take care of wbmp != bmp.  PNG, TIFF
+         and GIF are supported here, but not yet by main Thuban.  Hence,
+         support for them may be removed later.  Special contribution to
+         usability: get wxWidgets to change the cursor when we're waiting
+         for data from the network so the user won't start to worry.  This
+         causes a redrawing error/warning, though.
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.grok): Unlink
+         the DOM object.
+-04-01  Martin Schulze  <[email protected]>
+         * Extensions/wms/capabilities.py: Adjusted documentation
+         (WMSCapabilities.__init__): Improved documentation, fixed syntax
+         (WMSCapabilities.saveCapabilities): Only catch IOError when
+         handling files
+         (WMSCapabilities.loadCapabilities): Only catch IOError when
+         handling files
+         __main__: corrected variable naming
+         (WMSCapabilities.fetchCapabilities,loadCapabilities): Make this
+         class a specialisation of WMSCapabilitiesParser as well.  Also
+         execute grok() after loading or fetching capabilities, if that
+         went well, so that subsequent calls can already access the data.
+         (WMSCapabilities.getVersion): Export the used version of the
+         GetCapabilities request, so we can use it for subsequent calls,
+         i.e. for GetMap requests.
+         (WMSCapabilities.fetchCapabilities): Added proper error handling
+         when the GetCapabilities request failed, so that the surrounding
+         program can act accordingly.
+-03-30  Martin Schulze  <[email protected]>
+         * Extensions/wms/parser.py (WMSCapabilitiesParser.getLayerSRS):
+         Adjusted the getLayerSRS method to return the list of SRSes
+         extracted from <SRS> elements instead of <BoundingBox> elements.
+         Added a bit of documentation as well.
+         (WMSCapabilitiesParser.checkLayerSRS): Removed integrity test
+         since it was only implemented due to a misunderstanding.
+         * Extensions/wms/test/test_parser.py
+         (TestWMSCapabilitiesParser.test_LayerSRS): Adjust the tests to
+         reflect the corrected interpretation of the standard: i.e. a layer
+         does not have to define a BoundingBox for all SRSes it supports.
+         Hence the <SRS></SRS> specification is authoritative, not the list
+         of BoundingBoxes.
+         (TestWMSCapabilitiesParser.test_BoundingBoxes): Added a new test
+         to ensure None is returned for a non-existing SRS.
+         (TestWMSCapabilitiesParser.test_grok): Removed test_grok method
+         since it is not applicable anymore.  Listing more SRSes in <SRS>
+         elements is valid according to the specs.
+-03-26  Bernhard Reiter <[email protected]>
+         * README: Nicer formatting of text. Improved descriptions.
+         Reflected wxWidgets name change.
+         * Thuban/UI/about.py: Extended copyright to 2004 and added
+         information about the thuban-devel mailinglist.
+-03-24  Martin Schulze  <[email protected]>
+         * Extensions/wms/capabilities.py: Renamed the class to contain
+         'WMS', also added a linebreak where required
+         * Extensions/wms/parser.py: Finally added the XML parser for the
+         GetCapabilities response.
+         * Extensions/wms/test/sample.xml: Adjusted the sample file so that
+         <SRS> elements match the <BoundingBox> elements, except for the
+         layer 'beschriftung'.
+         * Extensions/wms/test/test_parser.py: Encode non-ascii strings
+         since Python uses unicode strings internally, otherwise
+         comparisons will fail.  Removed tests for getLayerBBoxSRS() since
+         the SRS will be calculated anyway and this method is obsoleted by
+         getLayerSRS().  Denote SRS as strings and not as cardinal numbers.
+         Move loading the sample file into the setUp method.  Added a test
+         for finding the integrity problem in the sample response.
+         Improved formatting.
+         * Extensions/wms/domutils.py: Added convenience routines for
+         handling of Document Object Model (DOM) nodes.
+         * Extensions/wms/test/test_domutils.py: Added a test for the
+         domutils module
+-03-19  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_parser.py (TestWMSCapabilitiesParser):
+         Moved path detection and adding into a module of its own,
+         adjustpath, which exports thubandir as main Thuban directory.
+         * Extensions/wms/test/test_ogclib.py (TestWMSLib): Moved path
+         detection and adding into a module of its own, adjustpath, which
+         exports thubandir as main Thuban directory.  Reorganised the
+         module in order to support the SkipTest feature for Thuban test
+         cases.
+         * Extensions/wms/test/adjustpath.py: Moved path detection and
+         adding into a module of its own.
+-03-18  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_parser.py: Added another test for
+         checking whether the WMS XML parser (to be implemented) returns
+         the information we expect.  This requires a sample WMS WML file
+         (sample.xml) which has been extracted from the frida server and
+         "improved" manually.
+         * Extensions/wms/test/test_ogclib.py: Added legacy code to add the
+         main Thuban directory to the path in order to be able to import
+         random modules.  Adjusted the PyOGCLib detection to reuse the
+         information gathered.  Also added a note about the PYTHONPATH
+         environment variable.
+         * Extensions/wms/test/test_ogclib.py: The format specification is
+         a mime-type, not a graphic format, hence image/jpeg wou ld be the
+         proper format and not JPEG.  We'll also have to take care of the
+         encoding of / as %2F.
+-03-16  Martin Schulze  <[email protected]>
+         * Extensions/wms/test/test_ogclib.py: Added a (hopefully)
+         comprehensive test for the getMapURL method, built compare URLs
+         according to the documentation in OGC 01-068r3
+         * Extensions/wms/capabilities.py (WMSCapabilities): Added the
+         class WMSCapabilities to manage capabilites, will incorporate
+         parsing the capabilities response and provide details for other
+         classes.
+-03-12  Bernhard Herzog  <[email protected]>
+         Support views in addition to normal tables in the postgis
+         shapestore
+         * Thuban/Model/postgisdb.py
+         (PostGISShapeStore._fetch_table_information): Add a fallback for
+         the case where the table name is not in the geometry_columns
+         table.  This is usually the case for views.  Also, set
+         self.shapestore here.
+         (PostGISShapeStore.ShapeType): No need to query the database all
+         the time.  The shape type is now determined in
+         _fetch_table_information
+         * test/postgissupport.py (PostgreSQLServer.new_postgis_db)
+         (PostgreSQLServer.get_static_data_db, PostGISDatabase.__init__):
+         New parameter to specify views.
+         (PostGISDatabase.has_data): Also compare the views.  New views
+         parameter
+         (PostGISDatabase.initdb): Create the views.
+         (PostgreSQLServer.get_default_static_data_db): Add the v_landmarks
+         view
+         * test/test_postgis_db.py
+         (TestPostGISShapestorePointFromViews): New.  Test a
+         PostGISShapeStore with a view
+         (TestPostGISShapestorePointOIDAsGIDColumn.setUp): Pass the name of
+         the geometry_column explicitly to test whether that works
+-03-12  Bernhard Herzog  <[email protected]>
+         Final step for explicit id/geometry columns: Loading and saving
+         * Resources/XML/thuban-1.1.dtd: New.  Derived from thuban-1.0.dtd
+         with the following changes:
+         (dbshapesource): Two new attributes id_column and geometry_column
+         * Thuban/Model/save.py (SessionSaver.write): Use the new dtd
+         (SessionSaver.write_session): Use the new namespace
+         (SessionSaver.write_data_containers): Write the new dbshapesource
+         parameters
+         * Thuban/Model/load.py (SessionLoader.__init__): New namespace for
+         the new file format version
+         (SessionLoader.start_dbshapesource): Handle the new db parameters
+         * test/test_save.py: Update to the new dtd and namespace
+         (SaveSessionTest.test_save_postgis): Update the NonConnectionStore
+         mock object to provide a working IDColumn method.
+         * test/test_load_1_0.py: New.  Copy of the test_load.py before
+         today's changes but with the round-trip tests removed.
+         * test/test_load_0_9.py: Update doc-string.
+         * test/test_load.py: Update all .thuban files to the new dtd and
+         namespace.
+         (TestPostGISLayer.file_contents): Add the new dbshapesource
+         paramters
+-03-11  Bernhard Herzog  <[email protected]>
+         Next step for explicit id/geometry columns: User interaction
+         * Thuban/UI/dbdialog.py (ChooseDBTableDialog.__init__): Rework how
+         the dialog is constructed. Add combo boxes to select id and
+         geometry column.  Rename some instance variables.
+         (ChooseDBTableDialog.GetTable): Return id and geometry column
+         names
+         (ChooseDBTableDialog.OnTableSelect): New. Event handler for
+         selections in the table list
+         * Thuban/UI/mainwindow.py (MainWindow.AddDBLayer): Use id_column
+         and geometry_column
+         * Thuban/Model/session.py (Session.OpenDBShapeStore): Add the new
+         parameters for id_column and geometry column of PostGISShapeStore
+         here as well.
+         * Thuban/Model/postgisdb.py (type_map): Add ROWID psycog type.
+         (_raw_type_map): New. Map raw PostgreSQL type ints to thuban types
+         (PostGISConnection.GeometryTables): Use a better query to
+         determine which relations in the database might be usable for
+         shapestores.  Now supports views as well but is more PostgreSQL
+         specific
+         (PostGISConnection.table_columns): New. Somewhat experimental
+         method to let the db dialogs provide lists of columns to users so
+         that they can select id and geometry columns.
+         (PostGISTable.__init__): The default value of the id_column
+         parameter is now None it still means "gid" effectively, though.
+         (PostGISTable.IDColumn): New introspection method to return a
+         column object for the id column
+         (PostGISShapeStore.GeometryColumn): New introspection method to
+         return a column object for the geometry column
+         * test/test_postgis_db.py
+         (TestPostGISConnection.test_gis_tables_non_empty):
+         Removed. Subsumed by the new:
+         (TestPostGISConnection.test_gis_tables_with_views_and_tables):
+         New. Tes the GeometryTables and table_columns methods with actual
+         tables and views.
+         (PointTests.test_id_column, PointTests.test_geometry_column):
+         New. tests for the new methods.
+         (TestPostGISShapestorePoint.setUp)
+         (TestPostGISShapestorePointSRID.setUp)
+         (TestPostGISShapestorePointExplicitGIDColumn.setUp): Fill the
+         instance variables needed by the new tests
+-03-11  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.GetList): The row
+         numbers given to ReadValue are ordinals.
+-03-11  Bernhard Herzog  <[email protected]>
+         Elimiate the requirement for PostGIS tables to have a column
+         called "gid".
+         * Thuban/Model/postgisdb.py (PostGISTable.__init__): New parameter
+         id_column to specify which column to use to identify rows.  Also
+         new instance variables id_column and quoted_id_column
+         (PostGISTable.RowIdToOrdinal, PostGISTable.RowOrdinalToId)
+         (PostGISTable.ReadRowAsDict, PostGISTable.ReadValue)
+         (PostGISTable.SimpleQuery): Use the id column name provided to the
+         constructor instead of "gid"
+         (PostGISShapeStore.__init__): New parameter id_column analogously
+         to PostGISTable.__init__.  This parameter is simply passed through
+         to the base class constructor
+         (PostGISShapeStore._create_col_from_description): Fix typo in
+         doc-string
+         (PostGISShapeStore.Shape, PostGISShapeStore.AllShapes)
+         (PostGISShapeStore.ShapesInRegion): Use the id column name
+         provided to the constructor instead of "gid"
+         * test/postgissupport.py
+         (PostgreSQLServer.get_default_static_data_db): New static table
+         landmarks_point_id with an id column != "gid.  Update the comments
+         a bit.
+         (skip_if_addgeometrycolumn_does_not_use_quote_ident): Fix typo in
+         doc-
+         (upload_shapefile): New parameter gid_column to use a name other
+         than "gid" for the column to store the shape ids
+         * test/test_postgis_db.py (TableTests): New.  Mixin-class
+         containing all tests previously in TestPostGISTable.  The actual
+         tests are the same but the code is a bit more configurable to
+         allow for different id columns etc.
+         (TestPostGISTable): Derive from TableTests now for the actual
+         tests.
+         (TestPostGISTableExplicitGIDColumn): New. Like TestPostGISTable
+         except that it the landmarks_point_id table to test the id_column
+         parameter
+         (PointTests): Extend the doc-string
+         (TestPostGISShapestorePointExplicitGIDColumn)
+         (TestPostGISShapestorePointOIDAsGIDColumn): New classes derived
+         from PointTests to test the explicit id_column parameter.  One
+         tests with the name of the column holding the shape ids, the other
+         uses PostgreSQL's OID column.  For the latter a number of methods
+         have to be overwritten to make them independent of the actual id
+         values.
+-03-08  Silke Reimer  <[email protected]>
+         Update debian directory:
+         * debian/changelog: Added new version.
+         * deiban/rules: Updated management of patches (with cbds)
+         * debian/control: Added cbds to dependencies
+         * debian/patches/*: New. Adds better support for patches of thuban in
+                         debian
+         * debian/menu: Syntax of menu changed slightly
+         * debian/setup.py.patch: removed because it has been moved to
+                         debian/patechs/setup.py.patch
+-02-26  Bernhard Herzog  <[email protected]>
+         Create the Doc/technotes directory for text files with information
+         for developers
+         * Doc/technotes/README: New. README for the technotes
+         * Doc/technotes/coding_guidelines.txt: New. Coding guidelines for
+         Thuban
+         * Doc/technotes/release_process.txt: New. Used to be
+         HOWTO-Release.  Now slightly adapted to technote formatting style.
+         * HOWTO-Release: Removed.  It's contents are now in
+         Doc/technotes/release_process.txt
+-02-25  Bernhard Herzog  <[email protected]>
+         * libraries/thuban/wxproj.cpp (get_wx_version): New.  Return the
+         version of wxWindows the module was compiled with so we can check
+         that against the wxPython version.
+         * Thuban/version.py (thuban_branch, thuban_release): New variables
+         controlling which and how Thuban versions are shown.  See the
+         comments for details.
+         (verify_versions): Also check that the wx version that wxproj is
+         compiled against matches that of the wxPython we use at runtime
+-02-20  Bernhard Herzog  <[email protected]>
+         * Extensions/wms/wms.py (epsg_code_to_projection): Use
+         get_system_proj_file to read the epsg projections.  The old way
+         depended on the current directory being the top Thuban directory.
+-02-20  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/test/test_svgmapwriter.py
+         (TestVirtualDC.test_clippath): Remove a debug print
+-02-20  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/__init__.py: New.  Turn
+         Extensions/svgexport into a package.
+         * Extensions/svgexport/svgmapwriter.py: Reorder the imports and
+         doc-string a bit.  The doc-string must come first, otherwise it's
+         not a doc-string.  The __future__ import must be the first thing
+         after the doc-string.  Use only double quotes in doc-strings.
+         Single quotes trip up emacs syntax highlighting if the text
+         contains apostrophes.
+-02-20  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/test/__init__.py,
+         Extensions/svgexport/test/test_svgmapwriter.py: New. Initial test
+         suite for svgexport
+         * test/runtests.py (find_test_modules): New. Function with the
+         module finding code from main.
+         (main): Use find_test_modules to figure out the default test
+         modules and take modules from Extensions.svgexport.test too.
+-02-19  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OnInit): Make sure
+         the mainwindow has a reference to the map of the initial session.
+         This fixes a bug introduced with the fix for RT#2245
+-02-19  Bernhard Herzog  <[email protected]>
+         * Extensions/svgexport/svgsaver.py,
+         Extensions/svgexport/svgmapwriter.py,
+         Extensions/svgexport/maplegend.py: Added again.  This time in the
+         correct place.
+-02-17  Bernhard Herzog  <[email protected]>
+         Fix for RT#2245
+         * Thuban/UI/application.py (ThubanApplication.OnInit): Initialize
+         instance variables before trying to create any windows.  Creating
+         windows can start an event loop if e.g. message boxes are popped
+         up for some reason, and event handlers, especially EVT_UPDATE_UI
+         may want to access things from the application.
+         (ThubanApplication.maps_changed): The mainwindow may not have been
+         created yet, so check whether it has been created before calling
+         its methods
+         * Thuban/UI/view.py (MapCanvas.OnIdle): Only try to redraw if we
+         have a map
+-02-17  Bernhard Herzog  <[email protected]>
+         * test/test_svgmapwriter.py, Extensions/svgsaver.py,
+         Extensions/svgmapwriter.py, Extensions/maplegend.py,
+         extensions/svgexport/svgsaver.py,
+         extensions/svgexport/svgmapwriter.py,
+         extensions/svgexport/maplegend.py: Removed.  These files were in
+         the wrong places or didn't work at all.
+-02-16  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.Export): Remove accidentally added
+         line
+-02-16  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.Export): Avoid UnboundLocalError.
+-02-15  Markus Rechtien  <[email protected]>
+         * Extensions/svgexport/svgmapwriter.py: New. Adds the capability
+         to write a session to a file in SVG format.
+         * Extensions/svgexport/svgsaver.py: New. Uses svgmapwriter.py
+         to write a SVG map of a session.
+         * Extensions/svgexport/maplegend: New. Writes a basic maplegend
+         in SVG format for the current session.
+-02-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.AddDBLayer): When the layer
+         can't be created, return immediately after displaying the error
+         message.
+-02-11  Bernhard Herzog  <[email protected]>
+         Handle postgis tables with more than one geometry column.
+         * Thuban/Model/postgisdb.py
+         (PostGISTable._fetch_table_information): Delegate the creation of
+         column objects to a different method so that we can extend that in
+         derived classes
+         (PostGISTable._create_col_from_description): New. Column object
+         creation part of _fetch_table_information
+         (PostGISShapeStore._create_col_from_description): New. Extend
+         inherited method to handle geometry columns
+         (PostGISShapeStore.__init__): New parameter geometry_column to
+         specify which geometry column to use.  Optional but mandatory for
+         tables with more than one geometry column
+         (PostGISShapeStore._fetch_table_information): Also use the name of
+         the geometry column when looking for the srid
+         (PostGISShapeStore.ShapeType): Also use the name of the geometry
+         column when looking for the shape type
+         * test/test_save.py (SaveSessionTest.test_save_postgis): Adapt
+         NonConnectionStore to changes in the PostGISShapeStore
+         * test/test_postgis_db.py
+         (TestPostGISSpecialCases.test_shapestore_two_geom_cols): Test
+         PostGISShapeStore with tables having two geometry columns.
+-02-10  Bernhard Herzog  <[email protected]>
+         Fix some postgis problems.  What remains to be done is real
+         handling of SRIDs as they affect how reprojection is done
+         * Thuban/Model/postgisdb.py (quote_identifier): Fix typo in
+         doc-string
+         (PostGISShapeStore._fetch_table_information): New. Extend
+         inherited method to retrieve srid
+         (PostGISShapeStore.BoundingBox): Handle tables without data.
+         extent yields NULL for those
+         (PostGISShapeStore.ShapesInRegion): Use the srid of the table.
+         * test/test_postgis_db.py
+         (TestPostGISSpecialCases.test_shapestore_empty_table): New test
+         for the special case of a table without any data
+         (TestPostGISShapestorePointSRID): New class with tests for a table
+         that uses srids
+         (PolygonTests): Fix a doc-string typo
+         * test/postgissupport.py (PostGISDatabase.__init__): New parameter
+         reference_systems with a specification of spacial reference
+         systems to create in the new db.
+         (PostgreSQLServer.new_postgis_db)
+         (PostgreSQLServer.get_static_data_db): New parameter
+         reference_systems to be passed through ultimately to
+         PostGISDatabase.  In new_postgis_db also check whether an existing
+         db already has the right srids
+         (PostgreSQLServer.get_default_static_data_db): Add srids and a
+         table that uses srids
+         (PostGISDatabase.initdb): Create the entries for the reference
+         systems
+         (PostGISDatabase.has_data): Add reference_systems parameter to
+         check for those too
+         (upload_shapefile): New parameter srid to create tables with a
+         specific srid
+-02-06  Frank Koormann  <[email protected]>
+         * po/pt_BR.po: Fixed charset
+-02-05  Frank Koormann  <[email protected]>
+         * po/pt_BR.po: Fixed format string for error message, missing %s
+         added (Thuban/UI/application.py:273)
+-02-03  Frank Koormann  <[email protected]>
+         First version of Portuguese (Brazilian) translation
+         * po/pt_BR.po: New, translation of pot (2004-01-15 16:07+0300) for
+         Brazilian Portuguese by Eduardo Patto Kanegae.
+         * Thuban/UI/about.py (About.__init.py__): Added Eduardo to the list of
+         translators.
+-01-22  Frank Koormann  <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added section on installation of
+         Thuban under Win32 systems. Fixed image path references in the postgis
+         section. Some minor source formattings.
+-01-21  Frank Koormann  <[email protected]>
+         Make Thuban remember path selections (at least for one application run).
+         * Thuban/UI/application.py (Application.OnInit): Initialize path as a
+         attribute of application object. Path is a dictionary of
+         strings, currently with the items "data" and "projection".
+         (Application.SetPath): New, stores path for the specified item.
+         (Application.Path): New, return path for the specified item.
+         * Thuban/UI/mainwindow.py
+         (MainWindow.OpenSession, MainWindow.SaveSessionAs,
+         MainWindow.AddLayer, MainWindow.AddRasterLayer,
+         MainWindow.TableOpen): Access "data" path information of the
+         application.
+         * Thuban/UI/projdialog.py (ProjFrame._OnImport, ProjFrame._OnExport):
+         Access "projection" path information of the application.
+-01-05  Bernhard Herzog  <[email protected]>
+         * po/ru.po: Updated translations from Alex Shevlakov
+-01-05  Bernhard Herzog  <[email protected]>
+         * po/Makefile, po/README: Move the description of how to generate
+         the translation statistics to the README.
+-12-23  Bernhard Herzog  <[email protected]>
+         * NEWS: Update for 1.0.0
+         * po/it.po: Another update from Maurizio Napolitano
+-12-23  Bernhard Herzog  <[email protected]>
+         * po/it.po: Updated translation from Maurizio Napolitano
+-12-23  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Mark one more string
+         for translation
+         * Thuban/UI/mainwindow.py (MainWindow.TableRename)
+         (MainWindow.RenameMap, MainWindow.RenameLayer): Mark some more
+         strings for translation
+         * po/de.po: Update with the newly marked strings.
+-12-22  Bernhard Herzog  <[email protected]>
+         * HOWTO-Release: Fix the places where version numbers have to be
+         updated
+-12-22  Bernhard Herzog  <[email protected]>
+         * setup.py (setup call): 1.0.0, yeah!
+         * Thuban/version.py (longversion): 1.0.0, yeah!
+         * Thuban/Model/load.py (SessionLoader.__init__): Accept the
+.0.0 namespace too
+         * Thuban/Model/save.py (SessionSaver.write_session): Save with
+.0.0 namespace
+         * test/test_load.py (LoadSessionTest.dtd)
+         (TestSingleLayer.file_contents)
+         (TestNonAsciiColumnName.file_contents)
+         (TestLayerVisibility.file_contents)
+         (TestClassification.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestLabelLayer.file_contents, TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update for
+.0.0 namespace
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update for 1.0.0 namespace
+-12-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.start_label): Make sure the
+         alignment flags are byte strings not unicode and that they have
+         valid values
+         * test/test_load.py (TestLabelLayer): New. Test loading (and
+         indirectly saving) of maps with labels.
+-12-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (TableGrid.OnDestroy)
+         (TableGrid.__init__): Handle EVT_WINDOW_DESTROY in the grid to
+         unsubscribe all subscribers.
+         (LayerTableFrame.OnDestroy): Do not unsubscribe any messages from
+         self.grid since it may already have been destroyed.
+         Fixes RT #2256
+-12-19  Bernhard Herzog  <[email protected]>
+         * po/fr.po, po/es.po: Updated translations from Daniel Calvelo
+-12-16  Bernhard Herzog  <[email protected]>
+         * debian/bitmappath.patch, debian/setup.py.patch:
+                 added to ensure compliance with FHS for debian
+         * debian/rules, debian/changelog:
+             added patches in rules to ensure compliance with FHS for debian
+-12-16  Bernhard Herzog  <[email protected]>
+         * po/Makefile (mo): Make the output a bit nicer so that it prints
+         statistics about the translations. Add a comment how produce even
+         nicer statistics with sed.
+-12-09  Frank Koormann   <[email protected]>
+         * Resources/Projections/defaults.proj:
+         French projection sample with correct accents (UNICODE).
+-12-05  Bernhard Herzog  <[email protected]>
+         * MANIFEST.in: Add the devtools directory
+         * setup.py (setup call): Use license instead of licence. This
+         silences a deprecation warning on Python 2.3
+-12-05  Frank Koormann   <[email protected]>
+         Documentation synced with 1.0rc1
+         * Doc/manual/thuban-manual.xml:
+         Minor formatting changes and references to database layers .
+         Introduction.Internationalization: New section on i18n.
+         MapManagement.AddingandRemovingLayers: Added item on database layers.
+         MapManagement.TheLegend: Added section and screenshot on popup menu.
+         ProjectionManagement: Updated screenshot and sentence on EPSG.
+         Appendix.SupportedDataSources: Added PostGIS.
+         Appendix.WorkingwithPostGIS: New section.
+         * Doc/manual/images/6_projection.png: Updated screenshot including
+         EPSG checkboxes.
+         * Doc/manual/images/3_5_popup_menu.png: New, popup menu screenshot.
+         * Doc/manual/images/app_postgis_add_layer.png,
+         Doc/manual/images/app_postgis_db_add.png,
+         Doc/manual/images/app_postgis_db_management.png:
+         New screenshots focussing on database layers
+-12-05  Frank Koormann   <[email protected]>
+         * Thuban/UI/projdialog.py (load_user_proj): If user.proj is missing
+         write warning to stderr instead of rising a warning dialog
+-12-03  Bernhard Herzog  <[email protected]>
+         Fix for RT #2243
+         * Thuban/UI/mainwindow.py (MainWindow.has_selected_shape_layer):
+         New. Like has_selected_layer but for shape layers only
+         (_has_selected_shape_layer): New. Like _has_selected_layer but for
+         shape layers only
+         (layer_show_table command, layer_jointable command): Use these
+         commands should only be available for shape layers
+-12-03  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.Unsubscribe): Deal with
+         publishers that are wx objects and may have been destroyed by wx
+         already. Fixes RT #2242.
+-12-03  Bernhard Herzog  <[email protected]>
+         * po/ru.po: Updates from Alex Shevlakov
+-12-03  Silke Reimer <silkeintevation.de>
+         * debian/control, debian/changelog: Added gdal-support to
+                 debian package, updated to new thuban version
+-12-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/version.py: New. Module for version number
+         manipulations. The version of make_tuple here also deals better
+         with more unusual version number strings, such as e.g.
+         "1.2+cvs20031111"
+         * Thuban/version.py (make_tuple): Removed. It's now in
+         Thuban.Lib.version. Use that implementation instead.
+         * test/test_lib_version.py: New. Tests for Thuban/Lib/version.py
+-12-02  Bernhard Herzog  <[email protected]>
+         * MANIFEST.in: Add debian files
+         * setup.py (setup call): Add packages for the Extensions so that
+         they're installed too
+         (data_files): Add READMEs and sample data from some Extensions
+         * NEWS: Add note about the extensions in binary packages
+-12-02  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/save.py (SessionSaver.write_session): Save files
+         with the thuban-1.0rc1
+         * Thuban/Model/load.py (SessionLoader.__init__): Recognize the
+         thuban-1.0rc1 namespace too
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update to thuban-1.0rc1
+         namespace
+         * test/test_load.py (LoadSessionTest.dtd): Update to thuban-1.0rc1
+         namespace
+         (TestSingleLayer.file_contents)
+         (TestNonAsciiColumnName.file_contents)
+         (TestLayerVisibility.file_contents)
+         (TestClassification.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update to
+         thuban-1.0rc1 namespace
+-12-01  Bernhard Herzog  <[email protected]>
+         * setup.py (proj4_prefix, wx_prefix, gdal_prefix): Fix these for
+         nt to better match Intevation's current w32 setup
+         * HOWTO-Release: Add note about updating MANIFEST.in
+         * MANIFEST.in: Add the Extensions
+         * NEWS: Update for 1.0rc1
+-12-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Change the wild
+         cards for the dialog so that shapefiles ending in all uppercase
+         SHP are listed too
+-11-28  Bernhard Herzog  <[email protected]>
+         * Thuban/version.py (longversion): Update to 1.0rc1
+         * setup.py (setup call): Update version to 1.0rc1. Use the
+         [email protected] email address as author email instead of my
+         personal one.
+-11-28  Bernhard Herzog  <[email protected]>
+         * po/de.po: Update german translation.
+-11-28  Bernhard Herzog  <[email protected]>
+         Unify the filenames stored in .thuban files so that the .thuban
+         files are more platform independend
+         * Thuban/Model/save.py (unify_filename): New. Unify filenames so
+         that they can be used on both windows and unix
+         (SessionSaver.prepare_filename): New. Handle all filename
+         transformations for filenames stored in the thuban file
+         (SessionSaver.write_data_containers, SessionSaver.write_layer):
+         Use prepare_filename
+         * test/test_save.py (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Filenames are always stored
+         with slashes on all currently supported platforms so adapt all
+         tests to this
+         * test/test_load.py (LoadSessionTest.filenames): With the new
+         filename scheme the filenames in the tests should be
+         understandable on all currently supported platforms so we turn
+         this into an empty list because we don't have to normalize them
+         anymore
+-11-28  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.test_arc_layer_with_projection):
+         Add the ellipsoid to the projection since some Proj versions
+         complain if it's missing.
+-11-27  Bernhard Herzog  <[email protected]>
+         Corect some bounding box projection problems
+         * Thuban/Model/proj.py (Projection.InverseBBox): New. Inverse
+         version of ForwardBBox
+         (Projection._transform_bbox): New. common implementation of
+         ForwardBBox and InverseBBox
+         (Projection.ForwardBBox): Use _transform_bbox.
+         * test/test_proj.py (TestProjection.test): Add test for
+         InverseBBox
+         * Thuban/Model/layer.py (Layer.LatLongBoundingBox)
+         (Layer.ShapesBoundingBox, RasterLayer.LatLongBoundingBox): Use the
+         new InverseBBox method to determine the unprojected bounding box
+         (Layer.ShapesInRegion): Use the ForwardBBox method to project the
+         bbox.
+         * test/test_layer.py (TestLayer.test_point_layer_with_projection):
+         Removed.
+         (TestLayer.test_arc_layer_with_projection): New. This test is
+         better able to test whether bounding boxes are projected correctly
+         than test_point_layer_with_projection
+         * Thuban/UI/viewport.py (ViewPort.map_projection_changed): Use
+         InverseBBox to unproject bboxes
+-11-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Make sure we have ASCII
+         source code.
+-11-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.__getattr__): Removed. It was only
+         there for backwards compatibility and all code relying on that
+         should have been updated by now.
+-11-25  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (TestClassification.test): Add the missing
+         round trip test.
+         (TestClassification.file_contents): Update to the newest file
+         format
+-11-25  Bernhard Herzog  <[email protected]>
+         Add very experimental (and possibly dangerous) extension to draw
+         polygons:
+         * Extensions/drawshape/README: New. Brief installation
+         instructions
+         * Extensions/drawshape/drawshape.py: New. Implementation of the
+         drawshape extensions
+         * Extensions/drawshape/patch.diff: Patch to apply before the
+         extension can be used.
+-11-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (ShapefileStore._open_shapefile)
+         (ShapefileStore.__init__): Factor opening the shapefile into a
+         separate method (the new _open_shapefile). This makes the code a
+         bit more readable but the real reason is that it makes some evil
+         hacks easier. :-)
+-11-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.check_attrs): If no
+         converter is specified for an attribute assume it's a string
+         containing only Latin1 characters. Update doc-string accordingly.
+         This change should fix many places where unicode objects might
+         accidentally enter Thuban.
+         * test/test_load.py (TestNonAsciiColumnName): New test to check
+         what happens with column names in DBF files that contain non-ascii
+         characters
+-11-21  Bernhard Herzog  <[email protected]>
+         Enable the experimental attribute editing again and introduce a
+         command line switch to actually activate it
+         * Thuban/UI/main.py (options): New. Container for options set on
+         the commmand line
+         (main): Add the --enable-attribute-editing flag.
+         * Thuban/UI/identifyview.py (IdentifyView.__init__): If attribute
+         editing is enabled use the grid ctrl which allows editing of the
+         values
+         * Thuban/Model/transientdb.py (AutoTransientTable.write_record):
+         New. Just delegate this to the underlying table.
+-11-20  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (ProjFileReadTests.test_read_unreadable_file):
+         Skip this test if run under non-posix systems since it only works
+         there
+-11-19  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py: Rework the way gdal support is
+         determined so that we can give a reason in the about why gdal is
+         not supported.
+         (gdal_support_status): New. Variable holding a string with the
+         reason for no gdal support
+         * Thuban/UI/about.py (About.__init__): Add the reason why gdal is
+         not supported to the message
+-11-19  Bernhard Herzog  <[email protected]>
+         Remove the old table interface and its test cases
+         * Thuban/Model/table.py (OldTableInterfaceMixin): Removed.
+         (DBFTable, MemoryTable): Do not derive from OldTableInterfaceMixin
+         anymore
+         * Thuban/Model/transientdb.py (TransientTableBase)
+         (AutoTransientTable): Do not derive from OldTableInterfaceMixin
+         anymore
+         * test/test_table.py: Removed since the old interface it tests is
+         gone.
+         * test/runtests.py (main): The old table interface is gone and
+         with it the deprecation warnings so remove the code that turns
+         these warnings into errors
+-11-19  Bernhard Herzog  <[email protected]>
+         * test/test_table.py: Revert to revision 1.5 again. Changing the
+         tests to use the new table interface is completely wrong since the
+         whole purpose of the tests in this module is to test the old
+         interface.
+-11-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISConnection.MatchesParameters):
+         New. Test whether the connection matches a set of connection
+         parameters
+         * Thuban/UI/dbdialog.py (DBFrame.conns_changed): Fix doc-string
+         (DBFrame.OnAdd): Use the new MatchesParameters method when looking
+         for existing connections with the same parameters and break out of
+         the loop correctly.
+         * test/test_postgis_db.py (TestBriefDescription)
+         (TestPostGISSimple.test_brief_description): Rename
+         TestBriefDescription to TestPostGISSimple and the test method to
+         test_brief_description so that we can add more test methods.
+         (TestPostGISSimple.test_matches_parameters): New. Test the new
+         MatchesParameters method
+-11-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (Publisher): Introduce a new flag,
+         _was_destroyed, to indicate whether an publisher instance has
+         already been destroyed.
+         (Publisher.Unsubscribe): Only disconnect if the publisher has not
+         been destroyed yet.
+         (Publisher.Destroy): Set the _was_destroyed flag to true.
+         * test/test_connector.py
+         (TestPublisher.test_unsubscribe_after_destroy): New. Test that
+         calling Unsubscribe after Destroy doesn't raise an exception
+-11-14  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.selected_shape): Fix
+         typo in doc-string
+-11-13  Bernhard Herzog  <[email protected]>
+         Quote table and column names properly for postgis.
+         * Thuban/Model/postgisdb.py (quote_identifier): New. Function to
+         quote an identifier for use in an sql statement
+         (PostGISColumn.__init__): Add the quoted_name attribute
+         (PostGISTable.__init__): New instance variable quoted_tablename
+         (PostGISTable._fetch_table_information): Use the quoted table
+         name. New isntance variable quoted_geo_col with a quoted version
+         of geometry_column
+         (PostGISTable.NumRows, PostGISTable.RowIdToOrdinal)
+         (PostGISTable.RowOrdinalToId): Use the quoted table name
+         (PostGISTable.ReadValue, PostGISTable.ValueRange)
+         (PostGISTable.UniqueValues, PostGISTable.SimpleQuery)
+         (PostGISShapeStore.BoundingBox, PostGISShapeStore.Shape)
+         (PostGISShapeStore.AllShapes, PostGISShapeStore.ShapesInRegion):
+         Use quoted table and column names
+         * test/test_postgis_db.py (TestPostGISSpecialCases)
+         (TestPostGISIgnoredColumns): Rename the class to
+         TestPostGISSpecialCases because that better describes the new
+         cases
+         (TestPostGISSpecialCases.test_unsupported_types)
+         (TestPostGISSpecialCases.test): Rename the method to
+         test_unsupported_types because we need a more descriptive name now
+         that there are more methods
+         (TestPostGISSpecialCases.test_table_name_quoting)
+         (TestPostGISSpecialCases.test_column_name_quoting)
+         (TestPostGISSpecialCases.test_shapestore_name_quoting): New test
+         cases to test quoting of table and column names in PostGISTable
+         and PostGISShapeStore
+         * test/postgissupport.py
+         (skip_if_addgeometrycolumn_does_not_use_quote_ident): New. Skip if
+         AddGeometryColumn desn't support table or column names with sapces
+         or double quotes
+-11-12  Jan-Oliver Wagner <[email protected]>
+         * Extensions/wms/__init__.py: New: Init to make this
+         directory a package.
+         * Extensions/wms/wms.py: New: Provide layers via OGC WMS.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (EPSG_DEPRECATED_PROJ_FILE): New.
+         Constant for the file woth deprecated epsg projections
+         (get_system_proj_file): Update doc-string
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Add a space
+         above the EPS widgets, introduce a check box for the deprecated
+         eps projections and a label for the epsg widgets
+         (ProjFrame._OnShowEPSG): Handle the deprecated EPSG projections
+         too
+-11-11  Bernhard Herzog  <[email protected]>
+         Avoid warnings when run under Python 2.3
+         * Thuban/UI/baserenderer.py (BaseRenderer.draw_point_shape)
+         (BaseRenderer.draw_label_layer): Coordinates must be ints.
+         * Thuban/UI/renderer.py (MapRenderer.make_point): Turn this into a
+         real method so that we can convert to int.
+         (MapRenderer.label_font): The font size mist be an int.
+         * Thuban/UI/common.py (Color2wxColour): The color values must be
+         ints. Also, remove the unnecessary asserts.
+         * test/test_load_0_8.py (TestUnicodeStrings.file_contents)
+         (TestUnicodeStrings.test): Python source code should not contain
+         non-ascii characters unless an encoding is specified in the file.
+         Therefore use \x escapes in the string literals for non-ascii
+         characters.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (get_system_proj_file): Add a filename
+         parameter so that this function can be used for all proj files in
+         Resource/Projections
+         (DEFAULT_PROJ_FILE, EPSG_PROJ_FILE): New. Predefined filenames for
+         get_system_proj_file
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Instead of one
+         ProjFile self.__sysProjFile use a dictionary of system ProjFile
+         objects self._sys_proj_files
+         (ProjFrame.build_dialog): Adapt to the new changes in the
+         ProjectionList constructor. Add a check button to toggle whether
+         EPSG projections are shown
+         (ProjFrame._OnShowEPSG): New. Handler for the epsg check button
+         events.
+         (ProjFrame.load_user_proj, ProjFrame.load_system_proj): Only show
+         the busy cursor if the files have not yet been loaded by the
+         dialog.
+         (ProjFrame.load_system_proj): Add a parameter for the name of the
+         proj file. Maintain the dictionary of system projections
+         self._sys_proj_files
+         * Thuban/UI/projlist.py (ProjectionList): Merge the system_projs,
+         user_projs parameters into one parameter proj_files which is a
+         list of proj files.
+         (ProjectionList._subscribe_proj_files)
+         (ProjectionList._unsubscribe_proj_files): New. Move
+         subscription/unsubscription of projfile messages to separate
+         methods
+         (ProjectionList.Destroy): The unsubscribe is now done in
+         _unsubscribe_proj_files
+         (ProjectionList.update_projections): We now have a list of proj
+         file objects
+         (ProjectionList.SetProjFiles): New method to set a new list of
+         proj file objects
+         * test/test_proj.py (ProjFileReadTests.test_get_system_proj_file):
+         Specify explicitly which system proj file to load.
+-11-11  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.Destroy): New. Clear all
+         instance variables to cut cyclic references. The GC would have
+         collected the loader eventually but it can happen that it doesn't
+         run at all until thuban is closed (2.3 but not 2.2 tries a bit
+         harder and forces a collection when the interpreter terminates)
+         (load_session): Call the handler's Destroy method to make sure
+         that it gets garbage collected early. Otherwise it will be
+         collected very late if at all and it holds some references to e.g.
+         shapestores and the session which can lead to leaks (of e.g. the
+         temporary files)
+         * test/test_load.py (TestSingleLayer.test_leak): New. test for the
+         resource leak in load_session
+-11-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py: Add a way to specify how layers in
+         extensions are to be rendered.
+         (_renderer_extensions): New. List with renderer for layers in
+         extensions
+         (add_renderer_extension): New. Add a renderer extension
+         (init_renderer_extensions): New. Init the renderer extensions
+         (BaseRenderer.render_map_incrementally): Search
+         _renderer_extensions for how to draw unknown layer types
+         (BaseRenderer.draw_raster_data): Add format parameter so that
+         formats other than BMP can be drawn
+         (BaseRenderer.draw_raster_layer): Pass an explicit format to
+         draw_raster_data
+         * Thuban/UI/renderer.py (raster_format_map): New. Mapping form the
+         strings of the format parameter of draw_raster_data method to wx
+         constants
+         (MapRenderer.draw_raster_data): Add the format parameter and use
+         raster_format_map to map it to the right wxwindows constant for
+         wxImageFromStream
+         * test/test_baserenderer.py (SimpleRenderer.draw_raster_data): Add
+         the format parameter and record it
+         (TestBaseRenderer.test_raster_no_projection): check the format
+         paramter of the draw_raster_data method
+         (TestBaseRenderer.test_renderer_extension): New. Test the renderer
+         extension facility
+-11-07  Bernhard Herzog  <[email protected]>
+         Tweak the usage of the sqlite database to make common use cases
+         more responsive. In most cases copying the data to the sqlite
+         database takes so long that using sqlite doesn't have enough
+         advantages.
+         * Thuban/Model/transientdb.py (TransientTableBase.ValueRange): Add
+         comments about performance and query the min and max in separate
+         statements because only that way will indexes be used.
+         (TransientTableBase.UniqueValues): Add some comments about
+         performance.
+         (AutoTransientTable.ValueRange, AutoTransientTable.UniqueValues):
+         Do not copy the data to the transient DB but use the transient
+         copy if it exists. See the new comments for the performance trade
+         offs
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table): Make sure that the
+         data is copied to the transient database at some point.
+-11-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (ShapefileStore.ShapesInRegion): Bind some
+         globals to locals so that it's a bit faster
+-11-03  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Use the ReadValue
+         method. ReadValue is faster than ReadRowAsDict since it only reads
+         one cell especially now that the dbf file objects actually
+         implement it.
+         * Thuban/Model/table.py (DBFTable.ReadValue): Use the new
+         read_attribute method of the dbf objects
+-11-03  Bernhard Herzog  <[email protected]>
+         * Extensions/profiling/profiling.py (popup_dialog_box): New config
+         variable to indicate whether the result should be shown in a
+         dialog box
+         (profile_screen_renderer, time_screen_renderer): Only show a
+         dialog box if popup_dialog_box is true.
+         (profile_screen_renderer): Flush stdout after the printing the
+         first part of the "profiling..." message
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Cache the pens and
+         brushes for the groups so that they're not created over and over
+         again
+         * Thuban/Model/classification.py (Classification.__getattr__)
+         (Classification._compile_classification)
+         (Classification._clear_compiled_classification): New. Methods to
+         manage a 'compiled' representation of the classification groups
+         which is created on demand
+         (Classification.InsertGroup, Classification.RemoveGroup)
+         (Classification.ReplaceGroup): reset the compiled representation
+         (Classification.FindGroup): Use the compiled representation to
+         find the matching group
+         (ClassGroupRange.GetRangeTuple): New. Return the range as a tuple
+-10-31  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classification.py (Classification.SetDefaultGroup):
+         Send a CLASS_CHANGED message
+         (Classification.RemoveGroup): Send a CLASS_CHANGED message and do
+         not return the removed group since it wasn't used.
+         * test/test_classification.py
+         (TestClassification.test_set_default_group): New. Test the
+         SetDefaultGroup method
+         (TestClassification.test_insert_group): New. Test the InsertGroup
+         method
+         (TestClassification.test_remove_group): New. Test the RemoveGroup
+         method
+         (TestClassification.test_replace_group): New. Test the
+         ReplaceGroup method
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (TestClassification.setUp):
+         Subscribe to the CLASS_CHANGED messages
+         (TestClassification.tearDown): New. Destroy the classification
+         properly
+         (TestClassification.test_defaults): Add tests for the default line
+         width and whether no messages were sent yet
+         (TestClassification.test_set_default_properties): Add tests for
+         messages and setting the default line width
+         (TestClassification.test_add_singleton)
+         (TestClassification.test_add_range)
+         (TestClassification.test_multiple_groups): Add tests for messages
+-10-31  Bernhard Herzog  <[email protected]>
+         Some more refactoring in preparation for new tests:
+         * test/test_classification.py (TestClassification.setUp): New.
+         Instantiate the classification here. Update the test methods
+         accordingly.
+         (TestClassification.test_multiple_groups): Make sure that the two
+         singletons matching 1 are considered different.
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (red, green, blue): New. These
+         constants were used in several cases. Update the relevant methods.
+         (TestClassification.test_defaults)
+         (TestClassification.test_set_default_properties)
+         (TestClassification.test_add_singleton)
+         (TestClassification.test_add_range)
+         (TestClassification.test_multiple_groups)
+         (TestClassification.test_deepcopy): New. These were formerly all
+         part of the single method test.
+         (TestClassification.test_deepcopy): Removed.
+         (TestClassIterator): Removed. The test case is now a method of
+         TestClassification since it tests part of the public interface of
+         Classification
+         (TestClassification.test_iterator): New. Used to be
+         TestClassIterator effectively
+-10-31  Jan-Oliver Wagner <[email protected]>
+         GUIfied the functions of the profiling extension.
+         * /Extensions/profiling/__init__.py: New: Init to make this
+         directory a package.
+         * Extensions/profiling/profiling.py: Moved menu entries to
+         the Extensions menu. Applied _() for strings.
+         (profile_screen_renderer): Catch the detailed printout and present
+         it in a dialog.
+         (time_screen_renderer): Raise a dialog to present the result instead
+         of printing it to stdout.
+-10-31  Bernhard Herzog  <[email protected]>
+         * test/test_classification.py (TestClassGroupProperties)
+         (TestClassGroup, TestClassGroupDefault, TestClassGroupRange)
+         (TestClassGroupSingleton, TestClassIterator, TestClassification):
+         Split TestClassification into several classes, one for each class
+         being tested. TestClassification itself now only tests
+         Classification. This split makes changes to the tests a bit easier
+-10-31  Bernhard Herzog  <[email protected]>
+         * Extensions/profiling/profiling.py: New. Extension to measure
+         Thuban performance
+-10-31  Frank Koormann <[email protected]>
+         Added two items to legend popup menu: Remove Layer and Show Layer Table
+         * Thuban/UI/legend.py (LegendPanel._OnRemoveLayer,
+         LegendPanel._OnShowTable): New event handlers, call the corresponding
+         mainwindow methods.
+         (LegendTree._OnRightClick): Added items to popup menu.
+-10-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dialogs.py (ThubanFrame.__init__): Handle
+         EVT_WINDOW_DESTROY
+         (ThubanFrame.OnDestroy): New. Handler for EVT_WINDOW_DESTROY. Does
+         nothing but is convenient for the derived classes.
+         * Thuban/UI/tableview.py
+         (TableFrame.OnDestroy, LayerTableFrame.OnDestroy): New.
+         Unsubscribe the messages here not in OnClose because that might
+         get called multiple times. Fixes RT #2196
+         (TableFrame.OnClose, LayerTableFrame.OnClose): Removed. Not needed
+         anymore.
+         * README: Update the minimum requirement for wxPython. Since we
+         now use the EVT_WINDOW_DESTROY event, we need at least 2.4.0.4,
+         the version in which that was introduced for all platforms
+-10-30  Frank Koormann <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Wrapped the major parts of
+         the join process in a ThubanBeginBusyCursor, ThubanEndBusyCursor
+         frame.
+-10-30  Jan-Oliver Wagner <[email protected]>
+         Improved APR import extension, added further EPSG definitions
+         and some cleanup regarding string class.
+         * test/test_proj.py (TestProjection.test_get_projection_units_geo):
+         Added test for alias 'longlat'.
+         * Resources/Projections/epsg-deprecated.proj: New. Contains
+         deprecated EPSG definitions.
+         * Extensions/importAPR/odb.py (ODBBaseObject.TreeInfo): Added
+         the variable names for objects.
+         * Extensions/importAPR/apr.py (APR_BLnSym, APR_BMkSym, APR_BShSym): New.
+         Copied from importAPR and provided with documentation.
+         * Extensions/importAPR/importAPR.py (APR_BLnSym, APR_BMkSym, APR_BShSym):
+         Moved to apr.py.
+         (APR_View): Added object ref 'ITheme'.
+         * Thuban/Lib/fileutil.py, Thuban/UI/proj4dialog.py: Replaced string
+         split function by corresponding use of the string class method.
+         * Thuban/Model/xmlwriter.py: Replaced string replace function by
+         corresponding string method.
+-10-29  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.draw_shape_layer_incrementally): Speed up the
+         special case of a classification that only has the default group
+-10-27  Bernhard Herzog  <[email protected]>
+         * po/fr.po, po/es.po: Updated translations from Daniel Calvelo
+         * po/de.po: Update.
+         * Thuban/UI/application.py
+         (ThubanApplication.ShowExceptionDialog): Handle translation of the
+         dialog message properly
+-10-27  Bernhard Herzog  <[email protected]>
+         Rework how localization works so that we use wx's translation
+         functions when running Thuban as a normal application but not when
+         we don't need any UI, such as in the test suite. See the comment
+         in Thuban/__init__.py for details
+         * Thuban/__init__.py (_): Add one level of indirection to make the
+         translation handling more flexible and to make it possible to use
+         either wx's translation services or not.
+         (gettext_identity, translation_function_installed)
+         (install_translation_function): New function to help with this
+         * Thuban/UI/__init__.py: Install the wx specific translation
+         function if it's OK to do that
+         * test/support.py (initthuban): Install a dummy translation
+         function so that importing Thuban.UI doesn't install a wx specific
+         one for which would need to import wxPython
+-10-27  Bernhard Herzog  <[email protected]>
+         * HOWTO-Release: Source archives should be created first and the
+         binary packages should be created from the source archives.
+         There's an official debian package now so there's no need to test
+         the rpm on debian anymore
+-10-27  Bernhard Herzog  <[email protected]>
+         Several rendering changes:
+          - Render the selection into a separate bitmap so that only that
+            bitmap needs to be redrawn when the selection changes
+          - Render incrementally showing previews and allowing interaction
+            before rendering is complete
+          - Update the renderer interface a bit. Most parameters of
+            RenderMap are now parameters of the constructor
+         * Thuban/UI/baserenderer.py (BaseRenderer.__init__): Add the map
+         and the update region as parameters. Update the doc-string
+         (BaseRenderer.render_map_incrementally): New. Generator function
+         to renders the map incrementally
+         (BaseRenderer.render_map): Remove the map argument (it's now in
+         the constructor) and simply iterate over the
+         render_map_incrementally generator to draw the map.
+         (BaseRenderer.draw_shape_layer_incrementally)
+         (BaseRenderer.draw_shape_layer): Renamed to
+         draw_shape_layer_incrementally and changed into a generator that
+         yields True every 500 shapes. Used by render_map_incrementally to
+         render shape layers incrementally
+         * Thuban/UI/renderer.py (ScreenRenderer.RenderMap): Removed the
+         map and region parameters which are now in the constructor
+         (ScreenRenderer.RenderMapIncrementally): New. Public frontend for
+         the inherited render_map_incrementally.
+         (BaseRenderer.draw_shape_layer): Removed.
+         (ScreenRenderer.draw_selection_incrementally): New. The selection
+         drawing part of the removed draw_shape_layer as a generator
+         (ScreenRenderer.layer_shapes): Update because of the region
+         parameter change
+         (ExportRenderer.__init__): New. Extend the inherited constructor
+         with the destination region for the drawing
+         (ExportRenderer.RenderMap): Removed the map and region parameters
+         which are now in the constructor
+         * Thuban/UI/view.py (MapCanvas.PreviewBitmap): New. Return a
+         bitmap suitable for a preview in a tool
+         (CanvasPanTool.MouseMove): Use the PreviewBitmap method to get the
+         bitmap
+         (MapPrintout.draw_on_dc): Adapt to new renderer interface
+         (MapCanvas.OnPaint): Handle drawing the selection bitmap if it
+         exists
+         (MapCanvas.OnIdle): Update the logic to deal with incremental
+         rendering and the selection bitmap
+         (MapCanvas._do_redraw): Handle the instantiation of the render
+         iterator and the redraws during rendering
+         (MapCanvas._render_iterator): New. Generator to incrementally
+         redraw both bitmaps
+         (MapCanvas.Export): Adapt to new renderer interface.
+         (MapCanvas.full_redraw): Reset the selection bitmap and the
+         renderer iterator too
+         (MapCanvas.redraw_selection): New. Force a redraw of the selection
+         bitmap
+         (MapCanvas.shape_selected): Only redraw the selection bitmap
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_polygon_no_projection)
+         (TestBaseRenderer.test_raster_no_projection)
+         (TestBaseRenderer.test_point_map_projection)
+         (TestBaseRenderer.test_point_layer_and_map_projection)
+         (TestBaseRenderer.test_point_layer_projection)
+         (TestBaseRenderer.test_point_with_classification): Adapt to new
+         renderer interface
+-10-24  Bernhard Herzog  <[email protected]>
+         * libraries/thuban/wxproj.cpp (draw_polygon_shape)
+         (point_in_polygon_shape, shape_centroid): Raise an exception if
+         the shape can't be read. Previously invalid shape ids would lead
+         to a segfault.
+         * test/test_wxproj.py (TestShapeCentroid.test_invalid_shape_id):
+         New. test whether an exception is raised for invalid shape ids
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/proj.py (Projection.GetProjectedUnits): Added 'longlat'
+         as alias for 'latlong'.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Added 'longlat'
+         as alias for 'latlong'.
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.proj_selection_changed): Set
+         the projection even for the UnknownPanel.
+         (UnknownProjPanel.__init__): Define the text and create the textctrl
+         widget.
+         (UnknownProjPanel._DoLayout): Replaced static text widget by the
+         textctrl created in __init__.
+         (UnknownProjPanel.SetProjection): Set the text for the text ctrl
+         including the parameters of the projection.
+-10-24  Jan-Oliver Wagner <[email protected]>
+         * Resources/Projections/epsg.proj: New. This is a list of
+         EPSG codes with parameters for proj. The list has been
+         generated using devtools/create_epsg.py based on the
+         file nad/epsg of the proj 4.4.7 package. Four projection
+         definitions have been deleted as they are not accepted by proj:
+         "CH1903+ / LV95", "Bern 1898 (Bern) / LV03C", "CH1903 / LV03"
+         and "HD72 / EOV".
+-10-22  Bernhard Herzog  <[email protected]>
+         Some more tweaks to the projection dialog which should fix RT
+         #1886.
+         * Thuban/UI/projlist.py (ProjectionList.Destroy): Unsubscribe from
+         the ProjFile's messages and call the base class methods correctly
+         (ProjectionList.SelectProjection): Set the wxLIST_STATE_FOCUSED
+         flag on the newly selected item too. Otherwise some other item is
+         focused and the first time the focus is moved with the keyboard
+         the selection moves in unexpected ways.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Do not set the
+         focus on the OK button, only on the projection list. That way the
+         list really has the focus initially
+         (ProjFrame.OnClose): Call the projection list's Destroy method to
+         make it unsubscribe all messages
+-10-21  Bernhard Herzog  <[email protected]>
+         Rework the projection dialog to fix a few bugs, including RT 2166
+         and most of 2168
+         * Thuban/UI/projlist.py: New. The class ProjectionList is a
+         special wxListCtrl to show a list of projections in a more MVC
+         fashion
+         * Thuban/UI/projdialog.py (ProjFrame): Substantial changes
+         throughout the class. The main change is to use the ProjectionList
+         class instead of a normal wxListBox. Also, add an explicit
+         "Unknown" projection to the projection choice control.
+         (ProjPanel.__init__): Add an "unknown" ellipsoid
+         (TMPanel.__init__, LCCPanel.__init__): Tweak the order of
+         instantiation of the panel's controls to make the tab-order more
+         natural
+-10-21  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (TestSingleLayer.file_contents)
+         (TestSingleLayer.test): Add non-ascii characters to the titles of
+         session, map and layer. This is effectively a port of the
+         TestUnicodeStrings test in test_load_0_8.py which for some reason
+         was only added there.
+         * test/test_load_0_9.py (TestSingleLayer.file_contents)
+         (TestSingleLayer.test): Same as in test_load.py: add non-ascii
+         characters to the titles of session, map and layer,.
+-10-21  Bernhard Herzog  <[email protected]>
+         Add EPSG projection handling to .thuban files
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update to 1.0-dev namespace
+         (SaveSessionTest.testSingleLayer): Update to 1.0-dev namespace and
+         use a and epsg projection to test saving them
+         * test/test_load.py (LoadSessionTest.dtd): Update to 1.0-dev
+         namespace
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update to use
+.0-dev namespace
+         (TestSingleLayer.file_contents, TestSingleLayer.test): Update to
+         use 1.0-dev namespace and use an EPSG projection to test whether
+         loading it works
+         * test/test_load_0_9.py: New. Effectively a copy of test_load.py
+         as of Thuban 0.9. These are now tests to determine whether Thuban
+         can still read files generated by Thuban 0.9
+         * Thuban/Model/save.py (SessionSaver.write)
+         (SessionSaver.write_session): Use the 1.0 dtd and 1.0-dev
+         namespace
+         (SessionSaver.write_projection): Write the projection's epsg
+         attribute
+         * Thuban/Model/load.py (SessionLoader.__init__): Also accept the
+         thuban-1.0-dev.dtd namespace
+         (SessionLoader.check_attrs): Allow a callable object as conversion
+         too
+         (SessionLoader.start_projection, SessionLoader.end_projection)
+         (SessionLoader.start_parameter): Handle the epsg attribute and
+         rename a few instance variables to lower case
+         * Resources/XML/thuban-1.0.dtd: New. Only difference to
+         thuban-0.9.dtd is the epsg attribute for projections.
+-10-21  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Let the user specify which tests to run
+         on the command line
+         * test/support.py (ThubanTestResult.getDescription): Override to
+         give a better short description. The description can be used as a
+         parameter to run_tests to run that particular test in isolation.
+-10-21  Frank Koormann   <[email protected]>
+         Popup menu for legend. Scheduled for the 1.2 release this was too
+         simple to implement: The popup menu is bound to the legend tree, while
+         the events are hanlded by its anchestor, the legend panel. This
+         allows reuse of all the event handlers already implemented for the
+         legend toolbar buttons.
+         * Thuban/UI/legend.py (LegendPanel.__init__): EVT_MENU macros
+         to add handlers for the events issued by the popup menu.
+         (LegendPanel._OnToggleVisibility): Handler for toggling layer
+         visibility event
+         (LegendPanel._OnProjection): Handler for layer projection event.
+         (LegendTree.__init__): Added EVT_TREE_ITEM_RIGHT_CLICK
+         (LegendTree._OnRightClick): Event handler for right click, select item
+         and pop up menu.
+         (LegendTree.ToggleVisibility): Toggle layer visibility
+         (LegendTree.LayerProjection): Raise layer projection dialog for
+         current layer.
+-10-21  Bernhard Herzog  <[email protected]>
+         * Resources/Projections/defaults.proj: Use correct DOCTYPE
+         declaration. The top-level element is projectionlist not projfile
+-10-20  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.write_proj_file): New. helper
+         method to write a projfile and display a busy cursor and error
+         dialogs.
+         (ProjFrame._OnSave, ProjFrame._OnAddToList, ProjFrame._OnImport)
+         (ProjFrame._OnExport, ProjFrame._OnRemove): Use write_proj_file
+         (ProjFrame.__FillAvailList): Translate "<None>" too and display a
+         busy cursor while loading the user and system prj files.
+-10-16  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (projfile_cache): Introduce a cache for
+         ProjFile objects
+         (clear_proj_file_cache): New function to clear the cache. Mainly
+         useful for use by the test suite
+         (read_proj_file): Use the cache.
+         * test/test_proj.py (TestProjFile): Clarify the doc-string
+         (ProjFileReadTests): Update doc-string
+         (ProjFileReadTests.test_get_system_proj_file): Check whether the
+         system proj files is cached.
+         (ProjFileLoadTestCase): New base class for the proj file tests
+         derived from support.FileLoadTestCase to provide some common
+         behavior.
+         (TestLoadingProjFile)
+         (TestLoadingProjFileWithEmptyProjectionlist.file_contents)
+         (TestProjFileWithInvalidParameters.file_contents): Derive from
+         ProjFileLoadTestCase
+         (TestLoadingProjFile.test_caching): New. Test whether the cache
+         works
+-10-16      Silke Reimer    <[email protected]>
+         * debian/*: New directory with configuration files for building a thuban
+           deb-package.
+-10-14  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Execute support.run_tests when run as
+         __main__ so that missing unsubscribes are detected
+         (TestProjFile.tearDown): Destroy the proj_file properly
+-10-14  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (PROJECTION_ADDED)
+         (PROJECTION_REPLACED, PROJECTION_REMOVED): New message types for
+         the ProjFile objects
+         * Thuban/Model/proj.py (ProjFile): Derive from Publisher so we can
+         easily send messages when the projections change
+         (ProjFile.Add, ProjFile.Remove, ProjFile.Replace): Issue messages
+         when the change was successful
+         * test/test_proj.py (TestProjFile.setUp): Subscribe to some of the
+         proj file messages
+         (TestProjFile.test_add_remove)
+         (TestProjFile.test_remove_non_existing)
+         (TestProjFile.test_replace)
+         (TestProjFile.test_replace_non_existing): Test whether the right
+         messages are sent
+-10-14  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjFile.test): Refactor into several
+         tests
+         (TestProjFile.test_add_remove)
+         (TestProjFile.test_remove_non_existing)
+         (TestProjFile.test_replace)
+         (TestProjFile.test_replace_non_existing): Some of the new
+         individual test cases
+         (TestProjFileSimple): New class for the rest of the test cases
+         that came out of the refactoring
+         (ProjFileTest): Derive from xmlsupport.ValidationTest so that the
+         derived classes don't have to
+-10-13  Bernhard Herzog  <[email protected]>
+         Add an optional EPSG code to the projection objects and extend the
+         .proj file format accordingly.
+         * Resources/XML/projfile.dtd (element projection): Add epsg
+         attribute
+         * Thuban/Model/proj.py (Projection.__init__): New parameter and
+         instance variable epsg. Update doc-string
+         (Projection.EPSGCode, Projection.Label): New methods to provide
+         access to EPSG code and a label for use in dialogs
+         * Thuban/Model/resource.py (ProjFileReader.start_projection)
+         (ProjFileReader.end_projection, ProjFileSaver.write_projfile):
+         Handle the epsg code attribute when reading or writing proj files
+         * Thuban/UI/projdialog.py (ProjFrame._OnSave)
+         (ProjFrame._OnAddToList, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__FillAvailList): Use the projection's Label method to
+         get the string for the list box
+         * test/test_proj.py (TestProjection.test_label)
+         (TestProjection.test_label_epsg)
+         (TestProjection.test_epsgcode_for_non_epsg_projection)
+         (TestProjection.test_epsgcode_for_real_epsg_projection): New tests
+         for the label and EPSGCode methods
+         (WriteProjFileTests.doTestWrite, WriteProjFileTests.test_write)
+         (WriteProjFileTests.test_write_empty_file): Create the ProjFile
+         objects in the test cases and put the expected contents into the
+         test case methods too. Update doTestWrite accordingly
+         (TestLoadingProjFile)
+         (TestLoadingProjFileWithEmptyProjectionlist): New classes with the
+         read tests from TestProjFile.
+         (TestProjFile.doTestRead, TestProjFile.testRead): Removed. These
+         tests are now in the new classes.
+         (sample_projfile, sample_projfile_data)
+         (sample_projfile2, sample_projfile_data2): Removed. Not used
+         anymore.
+         (TestProjFile.test_read_unreadable_file): No need to reset the
+         permissions at the end anymore since we use a unique filename
+-10-13  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Some more refactoring of the test cases
+         (ProjFileTest): New base class for the proj file tests.
+         (TestProjFile): Derive from ProjFileTest
+         (TestProjFile.test_read_unreadable_file)
+         (TestProjFile.test_read_empty_file, TestProjFile.doTestRead): Use
+         the new filename method to get a unique filename
+         (TestProjFile.doTestWrite, TestProjFile.testWrite): Removed.
+         (WriteProjFileTests): New class for proj file write tests.
+         Contains the write test that were in TestProjFile originally.
+-10-13  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjFile.testRead)
+         (TestProjFile.test_read_non_existing_file)
+         (TestProjFile.test_read_unreadable_file)
+         (TestProjFile.test_read_empty_file): Split into several methods.
+-10-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/sizers.py: New file with custom sizers.
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Instantiate
+         all projection type specific panels and put them into a
+         NotebookLikeSizer. This way the dialog doesn't change its size
+         when a different projection is selected
+         (ProjFrame.__init__): Rename projection_panels
+         projection_panel_defs and reuse projection_panels for a list of
+         the instantiated panels.
+         (ProjFrame._show_proj_panel, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__DoOnProjChoice): Changes due to the new handling of
+         the panels
+         (UnknownProjPanel._DoLayout): Place the newlines in the message
+         differently to make the panel narrower.
+         (TMPanel._DoLayout): Layout the parameters in one column.
+-10-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.build_dialog): New method
+         that contains all the setup for the dialog's widgets, layout and
+         event handling.
+         (__): Call build_dialog to build the dialog.
+         (ProjFrame.__set_properties, ProjFrame.__do_layout): Removed.
+         Their functionality is now in build_dialog
+         (ProjFrame.__VerifyButtons, ProjFrame.__VerifyButtons)
+         (ProjFrame.__DoOnProjAvail, ProjFrame.__DoOnProjAvail)
+         (ProjFrame.__DoOnProjChoice): Small updates due to slightly
+         different widget names and hierarchy introduced with build_dialog.
+-10-10  Bernhard Herzog  <[email protected]>
+         * README: Fix typo.
+-10-09  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/proj.py (ProjFile.Add): Do not check whether the
+         projection is already in the list. This is *a lot* faster when
+         loading files with hundreds of projections since it saves a linear
+         search. OTOH this will allow adding the same projection to the
+         user.proj file multiple times in the projection dialog but we'll
+         deal with that later
+-10-09  Jan-Oliver Wagner <[email protected]>
+         * devtools: New. Directory for developer tools that are not intended
+         for the regular user.
+         * devtools/create_epsg.py: New. Convert the epsg file of proj into
+         a python .proj file.
+-10-09  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py
+         (TestProjection.test_get_parameter_without_equals_sign): New. Test
+         whether GetParameter handles parameters without "=" sign correctly
+         * Thuban/Model/proj.py (Projection.GetParameter): Handle
+         parameters that do not contain a "=". Update the doc-string
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__set_properties): Remove the
+         length limit on the projname text control
+-10-08  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py (TestProjection.test_get_projection_units_geo)
+         (TestProjection.test_get_projection_units_normal): New. Tests for
+         the Projection.GetProjectedUnits method
+-10-08  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/resource.py (get_user_proj_file): small bug-fix:
+         Added missing 'val' parameter.
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): When the
+         projection type of the currently selected projection is not known,
+         i.e. there's no panel for it, use the UnknownProjPanel
+         (ProjFrame.__DoOnProjChoice, ProjFrame._show_proj_panel): Split
+         the actual replacing of the proj panel into the new method
+         _show_proj_panel.
+         (UnknownProjPanel): Add doc-string.
+         (UnknownProjPanel._DoLayout): Insert a newline into the text so
+         that the panel is not so wide.
+-10-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/resource.py (read_proj_file): Return the warnings
+         too. Update the doc-string
+         (get_proj_files): Removed. It wasn't used anywhere
+         (get_system_proj_files, get_system_proj_file): Rename to
+         get_system_proj_file and return the ProjFile object and not a list
+         of ProjFile objects. Update the callers.
+         (get_user_proj_files, get_user_proj_file): Rename to
+         get_user_proj_file return the ProjFile object and not a list of
+         ProjFile objects. Update the callers.
+         (ProjFileReader.__init__): New instance variable for the warnings.
+         Rename the __pf ivar to projfile. Update the methods referring to
+         __pf
+         (ProjFileReader.end_projection): Catch any errors raised when
+         instantiating the projection and record that as an error. The
+         projection will not be in the final ProjFile object.
+         (ProjFileReader.GetWarnings): New method to return the warnings.
+         * Thuban/UI/projdialog.py (ProjFrame.show_warnings): New method to
+         show the warnings from the projfile reader
+         (ProjFrame._OnImport): Deal with any warnings returned by
+         read_proj_file
+         (ProjFrame.__FillAvailList): Deal with any warnings returned by
+         get_system_proj_file or get_user_proj_file.
+         * test/test_proj.py (TestProjFile.doTestRead): Check the warnings.
+         (TestProjFileWithInvalidParameters.file_contents): New test cases
+         to test whether read_proj_file handles invalid projection
+         parameters correctly
+         (TestProjFile.test_get_system_proj_file): New. Simple test for
+         resource.get_system_proj_file
+-10-07  Bernhard Herzog  <[email protected]>
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStoreExceptions.tearDown): Clear the session
+         properly so that the temporary directories get deleted correctly
+-10-06  Bernhard Herzog  <[email protected]>
+         Handle the title changes in a proper MVC way.
+         * Thuban/UI/mainwindow.py (MainWindow.__init__): Subscribe to the
+         canvas' TITLE_CHANGED messages
+         (MainWindow.update_title): New. Update the main window's title
+         (MainWindow.__SetTitle): Removed. Use update_title instead.
+         (MainWindow.SetMap): Use update_title instead of __SetTitle
+         (MainWindow.RenameMap): Do change the window title explicitly
+         here. That's handled in a proper MVC way now.
+         (MainWindow.title_changed): New. Subscriber for the TITLE_CHANGED
+         messages
+         * Thuban/Lib/connector.py (Conduit): New class to help classes
+         that forward messages
+         * Thuban/UI/viewport.py: Forward the map's TITLE_CHANGED messages
+         (ViewPort): Derive from Conduit instead of Publisher
+         (ViewPort.Subscribe, ViewPort.Unsubscribe): Use the new base class
+         when calling the inherited versions
+         (ViewPort._subscribe_map, ViewPort._unsubscribe_map): New helper
+         methods to subscribe and unsubscribe map messages
+         (ViewPort.SetMap, ViewPort.Destroy): Use the new helper methods to
+         handle the map subscriptions
+         (ViewPort.Map, ViewPort.map_projection_changed)
+         (ViewPort.layer_projection_changed): Add or update doc-strings
+         * test/test_connector.py (TestPublisher.test_issue_simple): Fix
+         typo
+         (MyConduit): Helper class for the Conduit test.
+         (TestConduit): Test cases for Conduit
+         * test/test_connector.py: Use support.run_tests as main.
+         * test/test_viewport.py (ViewPortTest.setUp): Also subscribe to
+         the TITLE_CHANGED messages
+         (ViewPortTest.test_forwarding_title_changed): New test to check
+         whether the viewport forwards the map's TITLE_CHANGED messages
+         (TestViewportWithPostGIS.tearDown): Call the map's Destroy method
+         after the port's because the latter may require a still functional
+         map.
+-10-06  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.maps_changed): Add
+         doc-string
+-10-06  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (ViewPortTest.setUp)
+         (SimpleViewPortTest.test_init_with_size): Move the test for the
+         initial size as a constructor parameter from ViewPortTest.setUp
+         method to a new separate test in SimpleViewPortTest.
+-10-06  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (MockView): New class derived from
+         ViewPort with a mock implementation of GetTextExtent to be used in
+         the test cases
+         (ViewPortTest.setUp): Use MockView instead of ViewPort
+         * Thuban/UI/viewport.py (ViewPort.GetTextExtent): Turn this method
+         into what would be a "pure virtual function" in C++: always raise
+         NotImplementedError. Mock implementations for test cases don't
+         belong into the real code
+-10-02  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.test_empty_layer): Explicitly
+         close the dbf file we create so that it's contents have been
+         written properly.
+         * libraries/shapelib/shptree.c, libraries/shapelib/shpopen.c,
+         libraries/shapelib/shapefil.h, libraries/shapelib/dbfopen.c:
+         Update to shapelib 1.2.10
+-10-01  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tree.py, Thuban/UI/main.py: Remove the #! line as
+         it annoys lintian which warns about these files not being
+         executable. The #! isn't necessary here since if you absolutely
+         must execute them you can always say "python <filename>".
+-09-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classgen.py (GenQuantiles0): Removed since it's
+         only used in GREAT-ER but not used in Thuban itself. When GREAT-ER
+         is ported to a newer the import will fail, so it should be noticed
+         immediately that this function is gone.
+         Fixes RT#1919
+-09-26  Bernhard Herzog  <[email protected]>
+         Add a DTD for the projection files and make thuban write valid
+         projection files
+         * Resources/XML/projfile.dtd: New. DTD for thuban's projection
+         files
+         * Thuban/Model/resource.py (ProjFileSaver.write): Use
+         'projectionlist' as the name in the document type declaration so
+         that it matches the element type of the root element.
+         * test/test_proj.py (sample_projfile, sample_projfile2): Use
+         'projectionlist' as the name in the document type declaration just
+         as it is done now in the files thuban would write
+         (sample_projfile, sample_projfile_data): Fix spelling of
+         "Mercator"
+         (TestProjFile.doTestWrite): Validate the written and the expected
+         XML data
+         (TestProjFile): Derive from ValidationTest so that we can run xml
+         validation tests
+-09-24  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend): Do not
+         modify the list returned by map.Layers() in place since it is the
+         actual list of layers used by the map.
+-09-23  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added subsection to chapter
+         Extensions to describe the extensions coming with the Thuban
+         standard package (gns2shp and importAPR).
+-09-23  Bernhard Herzog  <[email protected]>
+         * libraries/thuban/wxproj.cpp (project_point): if there's an
+         inverse but no forward projection, convert to degrees after
+         applying the inverse projection. Fixes RT#2096
+         * test/test_wxproj.py: New. Test cases for wxproj.so. One test
+         implicitly tests for the fix to RT#2096
+         * test/support.py (FloatComparisonMixin.assertFloatSeqEqual):
+         Check that the sequences have the same lengths
+         * Resources/Projections/defaults.proj (Geographic projection): Use
+         a much more precise value for the to_meter attribute.
+-09-22  Bernhard Herzog  <[email protected]>
+         * test/support.py (initthuban): Make sure to unset the LANG env.
+         var. so that tests that compare translated strings work. Solves RT
+         #2094
+-09-22  Jan-Oliver Wagner <[email protected]>
+         Small improvement of APR import.
+         * Extensions/importAPR/test/test_apr.py (aprTest.test_LClass):
+         Added tests for text-ranges.
+         * Extensions/importAPR/apr.py (APR_LClass.GetThubanRange): Now
+         returns a string object if the range is based on text.
+         * Extensions/importAPR/importAPR.py (import_apr_dialog): Unified
+         range retrieval.
+-09-22  Jan-Oliver Wagner <[email protected]>
+         Initial version of the importAPR extension which is in
+         experimental state.
+         * /Extensions/importAPR/, /Extensions/importAPR/samples/,
+         /Extensions/importAPR/test/: New directories.
+         * /Extensions/importAPR/samples/README: New: Howto load the samples.
+         * /Extensions/importAPR/samples/iceland.apr: New: A sample APR
+         file which refers to the Thuban Iceland demo data.
+         * /Extensions/importAPR/test/README: New: Howto execute the tests.
+         * /Extensions/importAPR/test/test_apr.py: New: Tests for APR classes.
+         * /Extensions/importAPR/apr.py: New: Classes for ArcView Objects
+         as in '.apr'-files.
+         * /Extensions/importAPR/odb.py: New: Classes for generic ArcView
+         ODB Objects as in '.apr', '.avl' and other files.
+         * /Extensions/importAPR/__init__.py: New: Init to make this
+         directory a package.
+         * /Extensions/importAPR/importAPR.py: New: Import a ArcView
+         project file (.apr) and convert it to Thuban.
+-09-22  Jan-Oliver Wagner <[email protected]>
+         * Extensions/gns2shp.gns2shp.py: The main module of gns2shp.
+-09-19  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Extended section 'Installation'
+         with description on RPM installation and RPM binary package
+         creation.
+-09-18  Bernhard Herzog  <[email protected]>
+         * setup.py (data_files): Only add the mo files if the Locales
+         directory actually exists, so that setup.py works with a fresh CVS
+         checkout
+-09-12  Jan-Oliver Wagner <[email protected]>
+         * Examples/simple_extensions/simple_tool.py: bugfix: Tool is now
+         in viewport, not anymore in view
+-09-04  Jan-Oliver Wagner <[email protected]>
+         Introducing first Extension (gns2shp).
+         * Extensions, Extensions/gns2shp, Extensions/gns2shp/test: New.
+         * Extensions/__init__.py: New. init to make this dir a package.
+         * Extensions/gns2shp/__init__.py: New. init to make this dir a package.
+         * Extensions/gns2shp/test/README: New. some info on this test directory.
+         * Extensions/gns2shp/test/ls.txt: New. test data set (Liechtenstein).
+         * Extensions/gns2shp/test/test_gns2shp.py: New. Test for correct creation
+         of Shapefile from GNS text file format
+-09-03  Jan-Oliver Wagner <[email protected]>
+         Fix/workaround for bug #2019:
+         https://intevation.de/rt/webrt?serial_num=2019
+         * Thuban/UI/identifyview.py (IdentifyView.ID_STOP): New.
+         (IdentifyView.__init__): Added another button that allows to
+         stop the identify mode.
+         (IdentifyView.OnStop): New. Stops the identify mode.
+-09-03  Jan-Oliver Wagner <[email protected]>
+         Introducing a new exception dialog that allows to exit the
+         application immediately.
+         This fixes bug #2060: https://intevation.de/rt/webrt?serial_num=2060
+         * Thuban/UI/exceptiondialog.py: New. A special exception dialog.
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Made strings available to translations. Exchanged the simple
+         ScrolledMessageDialog by the new ExceptionDialog.
+-09-01  Bernhard Herzog  <[email protected]>
+         * NEWS: New. Summary of changes and release notes.
+         * MANIFEST.in: Add NEWS
+-09-01  Bernhard Herzog  <[email protected]>
+         * MANIFEST.in: Correct the include statement for the mo-files and
+         include the documentation too.
+         * setup.py (data_files): Add the .mo files
+         (setup call): Up to version 0.9.0
+-09-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dbdialog.py (ChooseDBTableDialog.__init__): Change the
+         parameter list to just parent and session
+         (ChooseDBTableDialog.__set_properties): Removed. Setting the
+         selection of empty list boxes is not allowed (and produces C++
+         assertion errors) and the rest of the setup is better done in
+         __init__ anyway.
+         (ChooseDBTableDialog.OnCancel, ChooseDBTableDialog.OnOK)
+         (ChooseDBTableDialog.OnLBDClick, DBDialog.OnOK): Use the Python
+         builtins True/False for booleans to avoid warnings from wxPython
+         * Thuban/UI/mainwindow.py (MainWindow.AddDBLayer): Adapt to new
+         ChooseDBTableDialog constructor parameters.
+-09-01  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py
+         (PostGISTable): Extend doc-string
+         (PostGISTable._fetch_table_information): Set the column index
+         correctly, pretending ignored columns don't exist.
+         * test/test_postgis_db.py (TestPostGISIgnoredColumns): New tests
+         for postgis tables with data types not yet supported by thuban.
+-08-29  Bernhard Herzog  <[email protected]>
+         * HOWTO-Release: Tweak item about running the tests.
+-08-29  Jan-Oliver Wagner <[email protected]>
+         * /Doc/manual/thuban-manual.xml: updated to version 1.0pre2.
+-08-29  Bernhard Herzog  <[email protected]>
+         Add some missing parameters to projections. Proj complains about
+         them on windows but for some reason not on Linux.
+         * test/test_save.py (SaveSessionTest.testLayerProjection): Add
+         missing required projection parameters
+         * test/test_proj.py (TestProjFile.test): Add missing required
+         projection parameters
+         * test/test_load_0_8.py (TestLayerProjection.file_contents)
+         (TestLayerProjection.test): Add missing required projection
+         parameters and tests for them
+         * test/test_load.py (TestLayerProjection.file_contents)
+         (TestLayerProjection.test): Add missing required projection
+         parameters and tests for them
+         * test/test_layer.py (TestLayer.test_base_layer): Add missing
+         required projection parameters
+-08-29  Bernhard Herzog  <[email protected]>
+         * libraries/pyprojection/Projection.i: Use pj_get_errno_ref to
+         access the pj_errno because directly accessing pj_errno doesn't
+         work on windows if the proj library is in a DLL
+         * libraries/pyprojection/Projection_wrap.c: Update from Projection.i
+-08-28  Bernhard Herzog  <[email protected]>
+         * test/test_proj.py: Import things from Thuban after calling
+         initthuban
+         * test/test_load.py (LoadSessionTest.filenames): New class
+         variable with the filename attributes to normalize
+         (LoadSessionTest.check_format): Pass self.filenames to
+         sax_eventlist to normalize the filename attributes
+         * test/xmlsupport.py: Add cvs keywords
+         (SaxEventLister.__init__): New parameter filenames which indicates
+         attributes that contain filenames
+         (SaxEventLister.startElementNS): Normalize the filename attributes
+         with os.path.normpath
+         (sax_eventlist): New parameter filenames to pass through to
+         SaxEventLister
+         * test/test_derivedshapestore.py: Make this file callable as a
+         program to execute the tests
+         (TestDerivedShapeStoreExceptions.test_table_with_wrong_size): Bind
+         the session to self.session so that it gets destroyed properly
+         * test/test_layer.py (TestLayer.tearDown): Call the session's
+         Destroy method
+         * test/test_map.py (TestMapBase.tearDown): Destroy self.session
+         too if it exists
+         (TestMapAddLayer.test_add_layer): Bind the session to self.session
+         so that it gets destroyed properly
+         * test/postgissupport.py (reason_for_not_running_tests): Add a
+         test for the existence of popen2.Popen4.
+         * test/test_save.py (SaveSessionTest.tearDown): New. Provide a
+         reliable way to destroy the sessions created in the test cases
+         (SaveSessionTest.test_dbf_table): Bind the session to self.session
+         so that it gets destroyed properly
+         (SaveSessionTest.testLayerProjection): Bind the session to
+         self.session so that it gets destroyed properly
+         * test/test_session.py (UnreferencedTablesTests.tearDown): Make
+         sure that the session is destroyed properly
+         * test/test_shapefilestore.py: Make this callable as a program to
+         execute the tests
+         * test/test_scalebar.py: Remove unnecessary import of _ from
+         Thuban
+         * test/support.py (print_garbage_information): Call initthuban
+         here because it may be called indirectly from test cases that test
+         test support modules which do not use anything from thuban itself
+         (ThubanTestProgram.runTests): Remove unnecessary debug print
+-08-28  Bernhard Herzog  <[email protected]>
+         * Thuban/version.py (longversion): Update to 0.9
+         * Thuban/UI/mainwindow.py: Remove some unused imports
+         * README: Add section about required additional software. Add date
+         and revision CVS keywords
+         * HOWTO-Release: Add item about the translations. Add date and
+         revision CVs keywords and change formatting to match README a bit
+         better
+         * po/de.po: Update for 0.9
+         * test/README: Tweak the wording a little because many tests are
+         not really unittest.
+-08-27  Bernhard Herzog  <[email protected]>
+         As preparation for the 0.9 release, switch thuban files to a
+         non-dev namespace
+         * Thuban/Model/save.py (SessionSaver.write_session): Write files
+         with the http://thuban.intevation.org/dtds/thuban-0.9.dtd
+         namespace
+         * Thuban/Model/load.py (SessionLoader.__init__): Accept the
+         http://thuban.intevation.org/dtds/thuban-0.9.dtd namespace too
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table)
+         (SaveSessionTest.test_save_postgis): Update for new namespace
+         * test/test_load.py (LoadSessionTest.dtd, TestSingleLayer)
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestPostGISLayer.file_contents)
+         (TestPostGISLayerPassword.file_contents)
+         (TestLoadError.file_contents, TestLoadError.test): Update for new
+         namespace
+-08-27  Bernhard Herzog  <[email protected]>
+         Make the table interface distinguish between row ids (an integer
+         that uniquely identifies a row) and row ordinals (a simple row
+         count from 0 to NumRows() - 1)
+         * Thuban/Model/postgisdb.py (PostGISTable.RowIdToOrdinal)
+         (PostGISTable.RowOrdinalToId): New methods to conver between row
+         ids and row ordinals
+         (PostGISTable.ReadRowAsDict, PostGISTable.ReadValue): New keyword
+         parameter row_is_ordinal to indicate whether the row parameter is
+         the row id or the ordinal
+         * Thuban/Model/transientdb.py (TransientTableBase.RowIdToOrdinal)
+         (TransientTableBase.RowOrdinalToId)
+         (AutoTransientTable.RowIdToOrdinal)
+         (AutoTransientTable.RowOrdinalToId): Same new methods as in
+         PostGISTable.
+         (TransientTableBase.ReadRowAsDict, TransientTableBase.ReadValue)
+         (AutoTransientTable.ReadRowAsDict, AutoTransientTable.ReadValue):
+         Same new parameter as in PostGISTable.
+         * Thuban/Model/table.py (DBFTable.RowIdToOrdinal)
+         (DBFTable.RowOrdinalToId, MemoryTable.RowIdToOrdinal)
+         (MemoryTable.RowOrdinalToId): Same new methods as in PostGISTable.
+         (DBFTable.ReadValue, DBFTable.ReadRowAsDict)
+         (MemoryTable.ReadValue, MemoryTable.ReadRowAsDict): Same new
+         parameter as in PostGISTable.
+         * Thuban/UI/tableview.py (DataTable.RowIdToOrdinal)
+         (DataTable.RowOrdinalToId): New methods to convert between row ids
+         and row ordinals.
+         (TableGrid.SelectRowById): New method to select a row based on its
+         ID as opposed to its ordinal
+         (DataTable.GetValue, TableGrid.OnRangeSelect)
+         (TableGrid.OnSelectCell, LayerTableGrid.select_shapes)
+         (QueryTableFrame.OnQuery, QueryTableFrame.get_selected)
+         (LayerTableFrame.__init__): Convert between row ids and row
+         ordinals as appropriate
+         * test/postgissupport.py (PostGISDatabase.__init__): Add
+         doc-string.
+         (PostGISDatabase.initdb): The optional third item in a tuple in
+         tables is now a (key, value) list with additional arguments to
+         pass to upload_shapefile
+         (upload_shapefile): New parameter gid_offset to allow gids that
+         are not the same as the shapeids in the shapefile
+         (PostgreSQLServer.get_default_static_data_db): Use the new
+         gid_offset to make the gids in landmarks 1000 higher than the
+         shapeids in the shapefile
+         * test/test_viewport.py
+         (TestViewportWithPostGIS.test_find_shape_at_point): Adapt to the
+         new shapeids in the landmarks table
+         * test/test_transientdb.py
+         (TestTransientTable.run_iceland_political_tests)
+         (TestTransientTable.test_transient_joined_table): Add tests for
+         the new table methods and new keywords arguments.
+         * test/test_postgis_db.py
+         (TestPostGISTable.test_read_row_as_dict_row_count_mode)
+         (TestPostGISTable.test_read_value_row_count_mode)
+         (TestPostGISTable.test_row_id_to_ordinal)
+         (TestPostGISTable.test_row_oridnal_to_id): New test for the new
+         table methods and the new arguments
+         (TestPostGISShapestorePoint.test_shapes_in_region)
+         (TestPostGISShapestorePoint.test_shape_raw_data)
+         (TestPostGISShapestorePoint.test_shape_points)
+         (TestPostGISShapestorePoint.test_shape_shapeid)
+         (TestPostGISShapestorePoint.test_all_shapes)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_simple_query)
+         (TestPostGISTable.test_read_value)
+         (TestPostGISTable.test_read_row_as_dict): Adapt to the new
+         shapeids in the landmarks table
+         * test/test_memory_table.py
+         (TestMemoryTable.test_read_row_as_dict_row_count_mode)
+         (TestMemoryTable.test_read_value_row_count_mode)
+         (TestMemoryTable.test_row_id_to_ordinal)
+         (TestMemoryTable.test_row_oridnal_to_id): New test for the new
+         table methods and the new arguments
+         * test/test_dbf_table.py
+         (TestDBFTable.test_read_row_as_dict_row_count_mode)
+         (TestDBFTable.test_read_value_row_count_mode)
+         (TestDBFTable.test_row_id_to_ordinal)
+         (TestDBFTable.test_row_oridnal_to_id): New test for the new table
+         methods and the new arguments
+-08-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISShapeStore.BoundingBox): Use a
+         more postgis specific but much faster method to get the bounding
+         box
+-08-26  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (PostGISTable.Title)
+         (PostGISShapeStore.AllShapes): Add these missing methods.
+         (PostGISShapeStore.ShapesInRegion): No need to raise
+         StopIteration. We can simply return
+         * test/test_postgis_db.py (TestPostGISTable.test_title)
+         (TestPostGISShapestorePoint.test_all_shapes): New tests for the
+         new methods
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (shapetype_map): Add MUTLIPOLYGON.
+         * test/test_postgis_db.py (PolygonTests): New class containing
+         those tests from TestPostGISShapestorePolygon that can also be
+         used to test MUTLIPOLYGON tables
+         (TestPostGISShapestorePolygon): Most tests are now in PolygonTests
+         so derive from that
+         (TestPostGISShapestoreMultiPolygon): New class with tests for
+         MUTLIPOLYGON tables
+         * test/postgissupport.py (PostGISDatabase.initdb): Allow the
+         tables argument to have tuples with three items to override the
+         WKT type used.
+         (PostgreSQLServer.get_default_static_data_db): Use the above to
+         create a polygon table with MUTLIPOLYGONs
+         (point_to_wkt, coords_to_point, polygon_to_wkt, coords_to_polygon)
+         (arc_to_wkt, coords_to_multilinestring): Rename from *_to_wkt to
+         coords_to*
+         (coords_to_multipolygon): New. Convert to MUTLIPOLYGON
+         (wkt_converter): New. Map WKT types to converters
+         (upload_shapefile): New parameter force_wkt_type to use a
+         different WKT type than the default
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py
+         (ThubanApplication.run_db_param_dialog): New. Suitable as a
+         db_connection_callback. Main difference is that the dialog run
+         from this method doesn't have a parent so it can be used even when
+         there is no main window
+         (ThubanApplication.OpenSession): Use self.run_db_param_dialog if
+         no db_connection_callback was given. This way the dialog pops up
+         even when the .thuban file was given as a command line parameter.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnLeftUp): Release the the mouse
+         before calling MouseLeftUp. MouseLeftUp may pop up modal dialogs
+         which leads to an effectively frozen X session because the user
+         can only interact with the dialog but the mouse is still grabbed
+         by the canvas.
+         Also, call the tool's Hide method before MouseLeftUp because
+         MouseLeftUp may change the tool's coordinates.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): Catch
+         LoadCancelled exceptions and handle them by returning immediately.
+-08-25  Bernhard Herzog  <[email protected]>
+         GUI part of loading sessions with postgis connections which may
+         require user interaction to get passwords or updated parameters
+         * Thuban/UI/dbdialog.py (DBDialog): Reimplement to make it look a
+         bit nucer and be more generic.
+         (DBFrame.OnAdd): Adapt to new DBDialog interface
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): New
+         optional parameter db_connection_callback which is passed to
+         load_session.
+         * Thuban/UI/mainwindow.py (MainWindow.run_db_param_dialog): New.
+         Suitable as a db_connection_callback
+         (MainWindow.OpenSession): Use self.run_db_param_dialog as the
+         db_connection_callback of the application's OpenSession method
+-08-25  Bernhard Herzog  <[email protected]>
+         Basic loading of sessions containing postgis connections:
+         * Thuban/Model/load.py (LoadError): Add doc-string
+         (LoadCancelled): New exception class to indicate a cancelled load
+         (SessionLoader.__init__): Add the db_connection_callback parameter
+         which will be used by the loader to get updated parameters and a
+         password for a database connection
+         (SessionLoader.__init__): Add the new XML elements to the
+         dispatchers dictionary
+         (SessionLoader.check_attrs): Two new conversions, ascii to convert
+         to a byte-string object and idref as a generic id reference
+         (SessionLoader.start_dbconnection)
+         (SessionLoader.start_dbshapesource): New. Handlers for the new XML
+         elements
+         (load_session): Add the db_connection_callback to pass through the
+         SessionLoader
+         * test/test_load.py (TestPostGISLayer, TestPostGISLayerPassword):
+         New classes to test loading of sessions with postgis database
+         connections.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (__ThubanVersion__): Remove this and
+         replace it and the comment with __BuildDate__ by the Source: and
+         Id: cvs keywords as used in the other files.
+-08-25  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.check_attrs): Raise a
+         LoadError when a required attribute is missing. The code used to
+         be commented out for some reason, but probably should have been
+         active.
+         * test/test_load.py (TestLoadError.test): Test the message in the
+         LoadError too to make sure it really is about the missing
+         attribute
+-08-22  Bernhard Herzog  <[email protected]>
+         * test/test_save.py (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Add XML validation tests.
+-08-22  Bernhard Herzog  <[email protected]>
+         Implement saving a session with a postgis connection
+         * Resources/XML/thuban-0.9.dtd (dbconnection, dbshapesource) New
+         elements for database connections and shapestores using db
+         connections
+         (session): Add the dbconnections to the content model
+         * Thuban/Model/save.py (SessionSaver.write_db_connections): New.
+         Write the db connections
+         (SessionSaver.write_session): Call write_db_connections to write
+         the connection before the data sources
+         (SessionSaver.write_data_containers): Handle postgis shapestores
+         * test/test_save.py (SaveSessionTest.thubanids)
+         (SaveSessionTest.thubanidrefs): Update for new DTD
+         (SaveSessionTest.test_save_postgis): New. Test saving a session
+         with postgis connections
+         * Thuban/Model/postgisdb.py (PostGISTable.DBConnection)
+         (PostGISTable.TableName): New accessor methods for the connection
+         and table name
+         * test/test_postgis_db.py (TestPostGISTable.test_dbconn)
+         (TestPostGISTable.test_dbname): New methods to test the new
+         PostGISConnection methods
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/postgisdb.py (ConnectionError): New exception class
+         for exceptions occurring when establishing a Database connection
+         (PostGISConnection.connect): Catch psycopg.OperationalError during
+         connects and raise ConnectionError.
+         * test/test_postgis_db.py (TestPostgisDBExceptions): New class for
+         tests for database exceptions
+-08-22  Bernhard Herzog  <[email protected]>
+         Prepare the test suite for tests with required authentication
+         * test/postgissupport.py (PostgreSQLServer.__init__): Add instance
+         variables with two predefined users/passwords, one for the admin
+         and one for a non-privileged user.
+         (PostgreSQLServer.createdb): Pass the admin name to initdb and add
+         the non-privileged user to the database and set the admin password
+         (PostgreSQLServer.wait_for_postmaster): Use the admin user name.
+         Better error reporting
+         (PostgreSQLServer.connection_params)
+         (PostgreSQLServer.connection_string): New methods to return
+         information about how to connect to the server
+         (PostgreSQLServer.execute_sql): New. Convenience method to execute
+         SQL statements
+         (PostgreSQLServer.require_authentication): Toggle whether the
+         server requires authentication
+         (PostgreSQLServer.create_user, PostgreSQLServer.alter_user): New.
+         Add or alter users
+         (PostGISDatabase.initdb): Pass the admin name one the
+         subprocesses' command lines. Grant select rights on
+         geometry_columns to everybody.
+         (upload_shapefile): Use the admin name and password when
+         connecting. Grant select rights on the new table to everybody.
+         * test/test_viewport.py (TestViewportWithPostGIS.setUp): Use the
+         server's new methods to get the connection parameters.
+         * test/test_postgis_session.py (TestSessionWithPostGIS.setUp)
+         (TestSessionWithPostGIS.test_remove_dbconn_exception): Use the
+         server's new methods to get the connection parameters.
+         * test/test_postgis_db.py
+         (TestPostGISConnection.test_gis_tables_empty)
+         (TestPostGISConnection.test_gis_tables_non_empty)
+         (PostGISStaticTests.setUp): Use the server's new methods to get
+         the connection parameters.
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Add the psycopg version.
+         * Thuban/version.py: Add psycopg version
+         * Thuban/Model/postgisdb.py (psycopg_version): New. Return the
+         version of the psycopg module
+-08-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/dbdialog.py (DBPwdDlg): Removed because it's not used.
+         (DBFrame.OnEdit): Removed because it's not used and wouldn't work
+         at the moment. The functionality should probably be implemented
+         some time, though.
+         (DBFrame.OnRemove): Display a message if the connection can't be
+         removed because it's still in use.
+-08-22  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): split up the huge about
+         text into elements/lists for easier translation. This fixes bug
+         https://intevation.de/rt/webrt?serial_num=2058
+         Also, made some forgotten string available for the i18n.
+-08-21  Bernhard Herzog  <[email protected]>
+         Make postgis support really optional including insensitive menu
+         items.
+         * Thuban/Model/postgisdb.py (has_postgis_support): New. Return
+         whether the postgis is supported.
+         * Thuban/UI/dbdialog.py: Put the psycopg import into try..except
+         to make postgis support optional
+         * Thuban/UI/mainwindow.py (_has_postgis_support): New. Context
+         version of Thuban.Model.postgisdb.has_postgis_support
+         (database_management command): Make it only sensitive if postgis
+         is supported.
+-08-21  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added CVS revision for rev-history.
+         (section Adding and Removing Layers): Added text and described
+         multi-selection.
+         (chapter Extensions): New.
+-08-21  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Changed dialog
+         settings to allow multiple files to load into the map.
+         Also reduced selection to *.shp as a default.
+-08-20  Bernhard Herzog  <[email protected]>
+         Add dialogs and commands to open database connections and add
+         database layers.
+         * Thuban/UI/mainwindow.py (MainWindow.DatabaseManagement): New
+         method to open the database connection management dialog
+         (MainWindow.AddDBLayer): New method to add a layer from a database
+         (_has_dbconnections): New helper function to use for sensitivity
+         (database_management command, layer_add_db command): New commands
+         that call the above new methods.
+         (main_menu): Add the new commands to the menu.
+         * Thuban/Model/postgisdb.py (PostGISConnection.__init__)
+         (PostGISConnection.connect): Establish the actual connection in a
+         separate method and call it in __init__. This makes it easier to
+         override the behavior in test cases
+         (PostGISConnection.BriefDescription): New method to return a brief
+         description for use in dialogs.
+         * test/test_postgis_db.py (NonConnection): DB connection that
+         doesn't actually connect
+         (TestBriefDescription): New class with tests for the new
+         BriefDescription method
+-08-19  Jan-Oliver Wagner <[email protected]>
+         Moved anything from extensions to libraries.
+         * libraries: New.
+         * libraries/ pyprojection, pyshapelib, shapelib, thuban: New.
+         * libraries/pyprojection/ LICENSE, MANIFEST.in, Projection.i,
+         Projection.py, Projection_wrap.c, setup.py, swighelp.txt: These files have
+         been moved here from thuban/extensions/pyprojection/
+         See there in the Attic for the older history.
+         * libraries/pyshapelib/ COPYING, ChangeLog, NEWS, README, dbflib.i,
+         dbflib.py, dbflib_wrap.c, pyshapelib_api.h, pytest.py, setup.py,
+         shapelib.i, shapelib.py, shapelib_wrap.c, shptreemodule.c: These files
+         have been moved here from thuban/extensions/pyshapelib/
+         See there in the Attic for the older history.
+         * libraries/shapelib/ dbfopen.c, shapefil.h, shpopen.c, shptree.c: These
+         files have been moved here from thuban/extensions/shapelib/
+         See there in the Attic for the older history.
+         * libraries/thuban/ bmpdataset.cpp, cpl_mfile.cpp, cpl_mfile.h,
+         gdalwarp.cpp, wxproj.cpp: These files have been moved here from
+         thuban/extensions/thuban/
+         See there in the Attic for the older history.
+         * MANIFEST.in, setup.cfg, setup.py: renamed extensions to libraries.
+         * extensions/thuban/ bmpdataset.cpp, cpl_mfile.cpp, cpl_mfile.h,
+         gdalwarp.cpp, wxproj.cpp: Moved to libraries/thuban.
+         * extensions/shapelib/ dbfopen.c, shapefil.h, shpopen.c, shptree.c:
+         Moved to libraries/shapelib.
+         * extensions/pyshapelib/ COPYING, NEWS, dbflib.py, pytest.py,
+         shapelib.py, README, dbflib_wrap.c, setup.py, shapelib_wrap.c,
+         ChangeLog, dbflib.i, pyshapelib_api.h, shapelib.i, shptreemodule.c:
+         Moved to libraries/pyshapelib.
+         * extensions/pyprojection/ MANIFEST.in, Projection.py, setup.py,
+         LICENSE, Projection.i, Projection_wrap.c, swighelp.txt:
+         Moved to libraries/pyprojection.
+         * extensions/ pyprojection, pyshapelib, shapelib, thuban: Removed.
+         * extensions: Removed.
+-08-19  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (ViewPortTest): We don't use the
+         facilities of FileTestMixin so don't derive from it.
+         (TestViewportWithPostGIS): New class with tests for using a
+         viewport on a map with postgis layers.
+-08-19  Bernhard Herzog  <[email protected]>
+         Add the db connection management to the session.
+         * Thuban/Model/session.py (Session.__init__): New instance
+         variable db_connections
+         (Session.AddDBConnection, Session.DBConnections)
+         (Session.HasDBConnections, Session.CanRemoveDBConnection)
+         (Session.RemoveDBConnection): New methods to manage and query the
+         db connections managed by the session
+         (Session.OpenDBShapeStore): New method to open a shapestore from a
+         db connection
+         * Thuban/Model/messages.py (DBCONN_REMOVED, DBCONN_ADDED): New
+         messages for the db connection handling in the session
+         * test/test_postgis_session.py: New. test cases for the session's
+         db connection handling with postgis connections
+-08-19  Bernhard Herzog  <[email protected]>
+         Add very basic postgis database support and the corresponding test
+         cases. The test cases require a PostgreSQL + postgis installation
+         but no existing database. The database will be created
+         automatically by the test cases
+         * test/README: Add note about skipped tests and the requirements
+         of the postgis tests.
+         * Thuban/Model/postgisdb.py: New. Basic postgis database support.
+         * test/test_postgis_db.py: New. Test cases for the postgis
+         support.
+         * Thuban/Model/wellknowntext.py: New. Parser for well-known-text
+         format
+         * test/test_wellknowntext.py: New. Test cases for the
+         wellknowntext parser
+         * test/postgissupport.py: New. Support module for tests involving
+         a postgis database.
+         * test/support.py (execute_as_testsuite): Shut down the postmaster
+         if it's still running after the tests
+         * Thuban/Model/data.py (RAW_WKT): New constant for raw data in
+         well known text format
+-08-19  Jan-Oliver Wagner <[email protected]>
+         * Examples/simple_extensions/hello_world.py: New. Raises a Hello World
+         message dialog.
+-08-18  Bernhard Herzog  <[email protected]>
+         * test/support.py (ThubanTestResult.printErrors): Indent the
+         reason for the skips in the output to make it a bit more readable.
+         (execute_as_testsuite): New helper function to run a test suite
+         and print some more information.
+         (run_tests): Use execute_as_testsuite to run the tests
+         * test/runtests.py (main): Use execute_as_testsuite to run the
+         tests
+-08-18  Bernhard Herzog  <[email protected]>
+         Fix some bugs in Thuban and the test suite that were uncovered by
+         changes introduced in Python 2.3:
+         * Thuban/Model/table.py (DBFTable.__init__): Make sure the
+         filename is an absolute name
+         * Thuban/Model/layer.py (RasterLayer.__init__): Make sure the
+         filename is an absolute name
+         * test/test_save.py (SaveSessionTest.testRasterLayer): Use a
+         unique filename to save to and use the correct relative filename
+         in the expected output.
+         (SaveSessionTest.test_dbf_table): Use the correct relative
+         filename in the expected output.
+         * test/test_layer.py (TestLayer.test_raster_layer): Update the
+         test to check whether the filename is absolute.
+-08-18  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Added Silke Reimer.
+-08-15  Bernhard Herzog  <[email protected]>
+         Change the way shapes are returned by a shape store. The
+         ShapesInRegion method returns an iterator over actual shape
+         objects instead of a list of shape ids.
+         * Thuban/Model/data.py (ShapefileShape.ShapeID): New. Return shape
+         id.
+         (ShapefileStore.ShapesInRegion): Return an iterator over the
+         shapes which yields shape objects instead of returning a list of
+         shape ids
+         (ShapefileStore.AllShapes): New. Return an iterator over all
+         shapes in the shape store
+         (DerivedShapeStore.AllShapes): New. Like in ShapefileStore
+         * Thuban/Model/layer.py (Layer.ShapesInRegion): Update
+         doc-string.
+         * Thuban/UI/baserenderer.py
+         (BaseRenderer.layer_ids, BaseRenderer.layer_shapes): Rename to
+         layer_shapes and make it return an iterator containg shapes
+         instead of a list of ids.
+         (BaseRenderer.draw_shape_layer): Update doc-string; Adapt to
+         layer_shapes() change
+         * Thuban/UI/renderer.py (ScreenRenderer.layer_ids)
+         (ScreenRenderer.layer_shapes): Rename as in BaseRenderer
+         * Thuban/UI/viewport.py (ViewPort._find_shape_in_layer): Adapt to
+         changes in the ShapesInRegion return value.
+         (ViewPort._get_hit_tester): Remove commented out code
+         * test/mockgeo.py (SimpleShapeStore.ShapesInRegion): Adapt to the
+         new return value.
+         (SimpleShapeStore.AllShapes): New. Implement this method too.
+         * test/test_layer.py (TestLayer.test_arc_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_point_layer)
+         (TestLayer.test_point_layer_with_projection)
+         (TestLayer.test_derived_store): Adapt to changes in the
+         ShapesInRegion return value.
+         * test/test_shapefilestore.py
+         (TestShapefileStoreArc.test_shapes_in_region)
+         (TestShapefileStorePolygon.test_shapes_in_region)
+         (TestShapefileStorePoint.test_shapes_in_region): Adapt to changes
+         in the ShapesInRegion return value.
+         (TestShapefileStorePoint.test_all_shapes)
+         (TestShapefileStoreArc.test_shape_shapeid): New tests for the new
+         methods
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.test_shapes_in_region): Adapt to changes in
+         the ShapesInRegion return value.
+         (TestDerivedShapeStore.test_all_shapes)
+         (TestDerivedShapeStore.test_shape_shapeid): New tests for the new
+         methods
+-08-15  Bernhard Herzog  <[email protected]>
+         Make the renderers deal correctly with raw vs. python level
+         representation of shape geometries
+         * Thuban/UI/baserenderer.py (BaseRenderer.low_level_renderer):
+         Return a flag useraw in addition to the callable and the parameter
+         to indicate whether the callable can deal with the raw shape data
+         or uses the higher level python lists of coordinates. The callable
+         now should accept either the raw data or the return value of the
+         shape's Points() method.
+         (BaseRenderer.draw_shape_layer): Adapt to the low_level_renderer
+         change
+         (BaseRenderer.projected_points): Instead of the shape id use the
+         points list as parameter.
+         (BaseRenderer.draw_polygon_shape, BaseRenderer.draw_arc_shape)
+         (BaseRenderer.draw_point_shape): Adapt to projected_points()
+         change and accept the points list as parameter instead of the
+         shape id.
+         * Thuban/UI/renderer.py (MapRenderer.low_level_renderer): Return
+         the useraw flag as required by the BaseRenderer
+         (ScreenRenderer.draw_shape_layer): Adapt to low-level renderer
+         changes.
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_point_with_classification): New test for
+         rendering a map with classifications.
+-08-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at)
+         (ViewPort._find_shape_in_layer, ViewPort._find_shape_in_layer)
+         (ViewPort._get_hit_tester, ViewPort.projected_points)
+         (ViewPort._hit_point, ViewPort._hit_arc, ViewPort._hit_polygon)
+         (ViewPort._find_label_at): Split the find_shape_at method into
+         several new methods and use the functions in the hit-test module.
+         * Thuban/UI/hittest.py: New module with Python-level hit-testing
+         functions
+         * test/test_hittest.py: New. Test for the new hittest module
+-08-15  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.ShapesInRegion): Apply the layer
+         projection to all corners of the bounding box to get a better
+         approximation of the projected bounding box
+         * test/test_layer.py (TestLayer.test_point_layer_with_projection):
+         New. Test coordinate handling of a layer with a projection.
+         Catches the bug fixed in Layer.ShapesInRegion
+-08-15  Bernhard Herzog  <[email protected]>
+         Move some of the mock objects in test_baserenderer into their own
+         module so they can easily be used from other tests
+         * test/mockgeo.py: New test helper module with some mock objects
+         for geometry related things like shapes, shapestores and
+         projections.
+         * test/test_mockgeo.py: New. Tests for the new helper module
+         * test/test_baserenderer.py: Some of the mock-objects are in
+         mockgeo now.
+-08-12  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Added Bj�rn Broscheit.
+-08-12  Bernhard Herzog  <[email protected]>
+         * po/de.po: New. German translations by Bjoern Broscheit
+-08-12  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UnknownProjPanel._DoLayout): Translated
+         strings have to be one string literal.
+-08-11  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin.assertPointListEquals):
+         New. This method was used in various derived classes, but it's
+         better to have it here.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertPointListEquals): Removed. It's now in
+         FloatComparisonMixin
+         * test/test_layer.py (TestLayer.assertPointListEquals): Removed.
+         It's now in FloatComparisonMixin
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertPointListEquals): Removed. It's now
+         in FloatComparisonMixin
+-08-11  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Add missing space to
+         error message
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Now use authorgroup. Added revhistory
+         with version number.
+         Changed title to reflect version number of Thuban.
+-08-08  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/about.py (About.__init__): Reworked the hall of fame. Now
+         the list corresponds to the "About" web page.
+-08-08  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/projdialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/proj4dialog.py (UTMProposeZoneDialog.dialogLayout):
+         Make sure translated strings are recognized as one string literal.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Make sure
+         translated strings are recognized as one string literal.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession): Make
+         sure translated strings are recognized as one string literal.
+-08-07  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.RawShapeFormat): New.
+         Simply delegates to the original shapestore.
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.test_raw_format): New. Test case for
+         DerivedShapeStore.RawShapeFormat
+-08-07  Bernhard Herzog  <[email protected]>
+         Add raw data interface to shape objects.
+         * Thuban/Model/data.py (ShapefileShape, Shape): Rname the shape
+         class to ShapefileShape which now holds shapefile specific
+         information.
+         (ShapefileShape.compute_bbox): Simplified to not cache any
+         information. The way this method is used that shouldn't matter
+         performance wise.
+         (ShapefileShape.RawData): New. Return the shapeid which is the raw
+         data format for shapes from shapefiles.
+         (ShapefileStore.RawShapeFormat): New. Return the raw datatype used
+         in the shape objects returned by a shapestore. For a
+         ShapefileStore this is always RAW_SHAPEFILE.
+         (RAW_PYTHON, RAW_SHAPEFILE): Constants for the RawShapeFormat
+         method.
+         * test/test_shapefilestore.py
+         (TestShapefileStore.test_raw_format): New test to test the raw
+         format feature of shapes.
+         * Thuban/Model/layer.py: Remove the unused import of Shape from
+         data. It was only there for interface compatibility but it's not
+         used inside of Thuban and the generic Shape class has gone away.
+         * Thuban/UI/renderer.py (MapRenderer.low_level_renderer): Check
+         the raw data format and only use an optimized version of its a
+         shapefile.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/test_baserenderer.py (SimpleShape): Shape class for the
+         tests.
+         (SimpleShapeStore.Shape): Use SimpleShape instead of
+         Thuban.Model.data.Shape to make the tests independed of the coming
+         changes.
+-08-07  Bernhard Herzog  <[email protected]>
+         * test/support.py (SkipTest, ThubanTestResult, ThubanTestRunner)
+         (ThubanTestProgram): New classes that extend the respective
+         classes from unittest. These new version support skipping tests
+         under certain expected conditions. In the Thuban test suite we
+         uses this for tests that require the optional gdal support.
+         (run_tests): Use ThubanTestProgram instead of the unittest.main()
+         * test/runtests.py (main): Use the new ThubanTestRunner instead of
+         the normal one from unittest
+         * test/test_layer.py (TestLayer.test_raster_layer): If this test
+         is not run because gdal support isn't available report this to the
+         runner.
+         * test/test_baserenderer.py
+         (TestBaseRenderer.test_raster_no_projection): Do not run this test
+         if gdal support isn't available and report this to the runner.
+-08-06  Bernhard Herzog  <[email protected]>
+         Rearrange the renderers a bit, partly in preparation for changes
+         required for the postgis merge, partly to make it more testable.
+         Also make the representation of coordinates in Shapes more
+         consistent.
+         * Thuban/UI/renderer.py (MapRenderer): Most of the code/methods in
+         this class is now in BaseRenderer. This class is now practically
+         only a specialization of BaseRenderer for rendering to an actual
+         wx DC.
+         (ScreenRenderer.draw_shape_layer): Use self.low_level_renderer()
+         to get the shapetype specific rendering functions.
+         * Thuban/UI/baserenderer.py: New file with the basic rendering
+         logic. The code in this file is completely independend of wx.
+         (BaseRenderer): Class with the basic rendering logic
+         * test/test_baserenderer.py: New. Test cases for BaseRenderer
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         error_on_redraw to guard agains endless loops and stack overflows
+         when there's a bug in the rendering code that raises exceptions.
+         (MapCanvas.OnIdle, MapCanvas._do_redraw): Split the actual
+         rendering into a separate method _do_redraw so that error handling
+         is a bit easier. When an exception occurs, set error_on_redraw to
+         true. When it's true on entry to OnIdle do nothing and return
+         immediately.
+         * Thuban/Model/data.py (ShapefileStore.Shape): For consistency, a
+         Shape object will always have the coordinates as a list of list of
+         coordinate pairs (tuples).
+         (Shape.compute_bbox): Adapt to new representation.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at)
+         (ViewPort.LabelShapeAt): Adapt to new coordinate representation in
+         Shape objects.
+         * test/test_shapefilestore.py
+         (ShapefileStoreTests.assertFloatTuplesEqual)
+         (ShapefileStoreTests.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestShapefileStoreArc.test_shape)
+         (TestShapefileStorePolygon.test_shape)
+         (TestShapefileStorePoint.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+         * test/test_layer.py (TestLayer.assertFloatTuplesEqual)
+         (TestLayer.assertPointListEquals): Rename to assertPointListEquals
+         and change purpose to checking equality of the lists returned by
+         Shape.Points().
+         (TestLayer.test_arc_layer, TestLayer.test_arc_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_point_layer)
+         (TestLayer.test_derived_store): Use the new assertPointListEquals
+         instead of assertFloatTuplesEqual
+         * test/test_derivedshapestore.py
+         (TestDerivedShapeStore.assertFloatTuplesEqual)
+         (TestDerivedShapeStore.assertPointListEquals): Rename to
+         assertPointListEquals and change purpose to checking equality of
+         the lists returned by Shape.Points().
+         (TestDerivedShapeStore.test_shape): Use the new
+         assertPointListEquals instead of assertFloatTuplesEqual
+-08-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/projdialog.py (UTMPanel._OnPropose): Added test for
+         a bounding box. A dialog is raised in case, no bounding box
+         is found. This fixes bug #2043:
+         https://intevation.de/rt/webrt?serial_num=2043
+-08-05  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/color.py (Color.__repr__): Make the repr of a color
+         object look like a Color instantiation. Formerly it looked like a
+         tuple.
+         * test/test_color.py (TestColor.test_repr)
+         (TestColor.test_equality, TestColor.test_inequality): New. test
+         some more apects of the Color class
+         (TestTransparent.test_repr, TestTransparent.test_hex)
+         (TestTransparent.test_equality): New. Test cases for the
+         Transparent object.
+-08-04  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: a number of small improvements.
+         The resulting file is the version submitted for GREAT-ER II.
+-08-01  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/resource.py, Thuban/UI/projdialog.py,
+         Thuban/UI/join.py, Thuban/UI/classgen.py, Thuban/UI/about.py,
+         Thuban/Model/resource.py: Insert cvs keywords and doc-strings.
+         * Thuban/UI/common.py: Insert cvs keywords and doc-strings.
+         (Color2wxColour, wxColour2Color, ThubanBeginBusyCursor)
+         (ThubanEndBusyCursor): Add doc-strings
+-08-01  Bernhard Herzog  <[email protected]>
+         First step towards PostGIS integration. More abstraction by movin
+         more code from the layer to the shapestore. More methods of the
+         layer are now simply delegated to the equivalent method of the
+         shapestore. The SHAPETYPE_* constants are now in data not in
+         layer.
+         * Thuban/Model/data.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Move these constants and classes from
+         layer.py to data.py
+         (ShapefileStore.__init__): More Initialization for the new methods
+         and functionality.
+         (ShapefileStore.ShapeType, ShapefileStore.NumShapes)
+         (ShapefileStore.BoundingBox, ShapefileStore.ShapesInRegion)
+         (ShapefileStore.Shape): New methods that were formerly implemented
+         in the layer.
+         (DerivedShapeStore.Shape, DerivedShapeStore.ShapesInRegion)
+         (DerivedShapeStore.ShapeType, DerivedShapeStore.NumShapes)
+         (DerivedShapeStore.BoundingBox): New. DerivedShapeStore
+         equivalents of the new shape methods. These versions are simply
+         delegated to the original shapstore.
+         * Thuban/Model/layer.py (SHAPETYPE_POLYGON, SHAPETYPE_ARC)
+         (SHAPETYPE_POINT, Shape): Removed. They're now in data.py
+         (Layer.SetShapeStore): Removed the initializatin of instance
+         variables that were needed for the stuff that's now in
+         ShapefileStore
+         (Layer.BoundingBox, Layer.NumShapes, Layer.ShapeType)
+         (Layer.Shape, Layer.ShapesInRegion): Simply delegate to the
+         shapestore.
+         * Thuban/UI/classifier.py, Thuban/UI/renderer.py,
+         Thuban/UI/viewport.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         * test/test_shapefilestore.py: New. Tests for ShapefileStore.
+         * test/test_derivedshapestore.py: New. Tests for DerivedShapeStore.
+         * test/test_layer.py: Import the SHAPETYPE_* constants from data
+         instead of layer.
+         (TestLayer.test_derived_store): Remove the test for the exception
+         when instantiating the DerivedShapeStore with an incompatible
+         table which is now in test_derivedshapestore.py. Add some more
+         tests of the layer methods to determine whether they work for a
+         DerivedShapeStore as well.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the list of required packages
+         by just listing the name and where they can be found.
+-07-31  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml:
+         Changed the screenshot elements to figure.
+         Changed some variablelist elements to itemizedlist.
+         Added section on GDAL formats.
+-07-31  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added a few sentences about
+         the Fix Border Color option when generating classes.
+-07-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Add docstrings. Rename specific
+         Ramp instances to use lower_case_style.
+         * Thuban/UI/classgen.py: Use renamed Ramp instances.
+         * Thuban/UI/classifier.py: Add docstrings.
+         * Thuban/UI/dock.py: Add docstrings.
+         * test/test_classgen.py: Use renamed Ramp instances.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (QueueingPublisher): Removed. This class
+         was never used in Thuban.
+-07-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Use the table's Title()
+         method directly instead of going through the transient_table
+         method. This faster because transient_table may force the copy of
+         a DBF file into the transient database and setting a table's title
+         doesnm't affect the title of the associated transient table, so
+         this fixes RT #2042
+         * Thuban/UI/main.py (__version__): Don't import the already
+         removed show_exception_dialog.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Put back this method and remove the equivalent function since we
+         are setting the exception hook from within this class (OnInit).
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/5_2_custom_ramp.png,
+         Doc/manual/images/5_2_quantiles.png,
+         Doc/manual/images/5_2_uniform_dist.png,
+         Doc/manual/images/5_2_unique_values.png,
+         Doc/manual/images/8_int_error.png: New screen shots.
+         * Doc/manual/thuban-manual.xml: Fixed typos and wording, clarified
+         some points, and added more screen shots.
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py: Remove the now unused import of warnings
+-07-29  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/data.py (SimpleStore): Removed. This class has been
+         deprecated since before the 0.8 release and isn't used in Thuban
+         itself anymore.
+         * Thuban/Model/transientdb.py: Remove some unnecessary imports
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.OnInit): set the
+         python exception hook here so that we are sure to catch any
+         Thuban exception that happen during initialization.
+         * Thuban/UI/main.py (main): Don't set the exception hook here,
+         it will get set in ThubanApplication.OnInit.
+-07-29  Jonathan Coles   <[email protected]>
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Removed and called it show_exception_dialog() so that the exception
+         handler can be set before the class is created.
+         * Thuban/UI/main.py (main): Install the exception handler before
+         a ThubanApplication is created.
+-07-29  Bernhard Herzog  <[email protected]>
+         * po/it.po: New. Italian translation by Maurizio Napolitano
+         * po/ru.po: New. Russian translation by Alex Shevlakov
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Extended section on supported
+         projections.
+-07-29  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: gaspell-checked.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/images/3_5_legend.png: Added border to improve look
+         on white background.
+-07-29  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fixed grammar and typos. Added
+         descriptions for the legend toolbar.
+         * Doc/manual/images/4_2_raster_layer_properties.png: Removed
+         cursor from dialog box.
+-07-28  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: More screenshots and more chapters.
+         * Doc/manual/images/2_4_session_tree.png,
+         Doc/manual/images/3_5_legend.png, Doc/manual/images/3_rename_map.png,
+         Doc/manual/images/4_2_layer_properties.png,
+         Doc/manual/images/4_2_raster_layer_properties.png,
+         Doc/manual/images/5_3_genclass.png,
+         Doc/manual/images/5_classification.png,
+         Doc/manual/images/6_projection.png,
+         Doc/manual/images/7_1_table_view.png,
+         Doc/manual/images/7_2_5_join.png: New screenshots.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Chapter on Projection Management.
+-07-24  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added EPS images and wrote
+         chapter on Layer Management.
+         * Doc/manual/Makefile: New. Makefile to generate all formats for the
+         manual and images.
+-07-24  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/range.py, Thuban/version.py: Remove the #! line as
+         it annoys lintian which warns about these files not being
+         executable. The #! isn't necessary here since if you absolutely
+         must execute them you can always say "python <filename>".
+         * Thuban/UI/renderer.py (ScreenRenderer.draw_shape_layer): Remove
+         superfluous code to set brush and pen for point shapes
+         * Thuban/UI/viewport.py: Remove commented out code that wouldn't
+         belong in viewport anyway
+-07-24  Frank Koormann   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added section on table management.
+-07-24  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Recognize the long "verbose" option
+         correctly.
+-07-22  Jonathan Coles   <[email protected]>
+         * Doc/manual/thuban-manual.xml: Continue to write first revision
+         of the manual.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Wrap method
+         with Begin/EndDrawing() calls to ensure we aren't doing to
+         many updates to the dc during rendering.
+         (ScreenRenderer.draw_shape_layer): self.draw_point_shape takes
+         a pen and brush argument so they need to be passed to the function.
+         * Thuban/UI/viewport.py (ViewPort.calc_min_max_scales): New.
+         Calculates the minimum and maximum scale values. Factored out
+         of set_view_transform so that it could be used to zoom all the
+         way into a single point.
+         (ViewPort.set_view_transform): Call calc_min_max_scales().
+         (ViewPort.FitSelectedToWindow): Zoom to the maximum scale
+         if only a single point is selected.
+         * Doc/manual/images/1_2_legend_close.png,
+         Doc/manual/images/1_2_legend_dock.png,
+         Doc/manual/images/1_2_mainwindow.png,
+         Doc/manual/images/1_2_mainwindow.ps,
+         Doc/manual/images/1_2_mainwindow.sk,
+         Doc/manual/images/3_2_fullextent.png,
+         Doc/manual/images/3_2_fulllayerextent.png,
+         Doc/manual/images/3_2_fullshapeextent.png,
+         Doc/manual/images/3_2_pan.png,
+         Doc/manual/images/3_2_zoomin.png,
+         Doc/manual/images/3_2_zoomout.png,
+         Doc/manual/images/3_3_identify.png,
+         Doc/manual/images/3_3_label.png,
+         Doc/manual/images/3_5_invisible.png,
+         Doc/manual/images/3_5_movedown.png,
+         Doc/manual/images/3_5_moveup.png,
+         Doc/manual/images/3_5_props.png,
+         Doc/manual/images/3_5_tobottom.png,
+         Doc/manual/images/3_5_totop.png,
+         Doc/manual/images/3_5_visible.png: New. Images for the documentation.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/messages.py (MAP_REPLACED): New message.
+         * Thuban/UI/viewport.py (ViewPort.SetMap): Issue MAP_REPLACED
+         after the new map has been assigned
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages):
+         Delegate MAP_REPLACED to the canvas too
+         (MainWindow.prepare_new_session): Removed. Thanks to the new
+         MAP_REPLACED message it's no longer needed
+         (MainWindow.OpenSession, MainWindow.NewSession):
+         prepare_new_session has been removed.
+         * Thuban/UI/classifier.py (Classifier.__init__): Subscribe to
+         MAP_REPLACED so that we can close the dialog if a new map is set.
+         (Classifier.unsubscribe_messages): Unsubscribe from MAP_REPLACED
+         (Classifier.map_replaced): Handle MAP_REPLACED by closing the
+         dialog
+         * test/test_viewport.py (SimpleViewPortTest)
+         (SimpleViewPortTest.test_default_size): Add doc-strings
+         (ViewPortTest.setUp): Bind map to self.map so we can use it in
+         tests. Subscribe to MAP_REPLACED messages too.
+         (ViewPortTest.tearDown): No need to explicitly unsubscribe
+         (ViewPortTest.test_set_map): New test for the SetMap method.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_viewport.py (SimpleViewPortTest.test_default_size):
+         Move this test from ViewPortTest.setUp to this new separate test
+         case. setUp is not the place for the actual tests.
+         (ViewPortTest.test_inital_settings, ViewPortTest.setUp): Move some
+         more of the test from setUp to the new test test_inital_settings.
+         (ViewPortTest.test_win_to_proj, ViewPortTest.test_proj_to_win)
+         (ViewPortTest.test_proj_conv): Split test_proj_conv into
+         test_win_to_proj and test_proj_to_win and make the tests easier to
+         understand
+         (ViewPortTest.testFitRectToWindow, ViewPortTest.testZoomFactor)
+         (ViewPortTest.testZoomOutToRect, ViewPortTest.testTranslate)
+         (ViewPortTest.test_unprojected_rect_around_point)
+         (ViewPortTest.test_find_shape_at, ViewPortTest.testTools):
+         Reformat to increase readability.
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnLeftDown): Capture the mouse.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/runtests.py: The test suite can now be run without an X
+         connection. To make sure this remains true, remove the DISPLAY
+         environment variable so that an error occurs if the wxGTK is
+         imported accidentally
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/viewport.py: Remove unused imports
+         * Thuban/UI/view.py: Remove unused imports
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_export.py Remove unused imports. The OutputTransform
+         function is now in viewport.py and is called output_transform
+         (TestScalebar.test_output_transform)
+         (TestScalebar.test_OutputTransform): Renamed to
+         test_output_transform and updated to use output_transform instead
+         of OutputTransform
+         * Thuban/UI/view.py (OutputTransform): Moved to viewport.py and
+         renamed.
+         (MapCanvas.Export, MapPrintout.draw_on_dc): OutputTransform was
+         renamed to output_transform
+         * Thuban/UI/viewport.py (OutputTransform, output_transform):
+         Rename to output_transform
+-07-18  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.__init__): Rename
+         classificationField to classificatin_column and init it here so
+         that it can be used in SetClassificationColumn
+         (Layer.GetClassificationColumn, Layer.GetClassificationField):
+         Rename to GetClassificationColumn.
+         (Layer.SetClassificationColumn, Layer.SetClassificationField):
+         Rename to SetClassificationColumn and issue a LAYER_CHANGED
+         message if the column changes.
+         (Layer._classification_changed, Layer.ClassChanged): Rename to
+         _classification_changed. Update the callers.
+         (Layer.SetShapeStore): Further field->column renames.
+         * Thuban/Model/load.py (SessionLoader.start_classification)
+         (SessionLoader.start_clpoint): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/Model/save.py (SessionSaver.write_classification): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/classifier.py (Classifier.__init__)
+         (Classifier._OnTry, Classifier._OnRevert): Updates because of
+         field->column method name changes in the Layer class
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Updates
+         because of field->column method name changes in the Layer class
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Updates because
+         of field->column method name changes in the Layer class
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.testClassifiedLayer): Update because of
+         field->column method name changes in the Layer class
+         * test/test_layer.py (SetShapeStoreTests.setUp)
+         (SetShapeStoreTests.test_sanity): Update because of field->column
+         method name changes in the Layer class
+         (TestLayerModification.setUp): Subscribe to LAYER_CHANGED as well
+         (TestLayerModification.test_sanity)
+         (TestLayerModification.test_initial_settings): remove unsued code
+         and rename to test_sanity.
+         (TestLayerModification.test_set_classification): New test for
+         SetClassification and SetClassificationField.
+-07-18  Bernhard Herzog  <[email protected]>
+         * test/test_classgen.py (TestFixedRamp.test): Extend test to check
+         the non-fixed values as well. The old test would have accepted a
+         fixed ramp that only returnes the fixed properties
+-07-17  Jonathan Coles   <[email protected]>
+         * Doc/manual/mainwindow.png, Doc/manual/mainwindow.xcf: Screen
+         shots for the manual. The XCF file is the source image and
+         has additional layers to support changes.
+         * Doc/manual/thuban-manual.xml: Wrote an initial Introduction.
+         * Thuban/UI/classifier.py (Classifier.__BuildClassification):
+         Return both the new class and the field name.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Don't
+         fit the map to the window as this changes any zoom level that
+         the user may have set.
+-07-16  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles): Remove
+         fixes parameter, but maintain the same functionality by having
+         the calling function pass a FixedRamp object for the ramp.
+         (FixedRamp): New. Adapts a ramp to have fixed property values.
+         * Thuban/Model/classification.py: Use new CLASS_CHANGED message.
+         (Classification): Inherit from Publisher.
+         (Classification.__init__): Remove the layer parameter.
+         Classifications no longer need to have a parent layer.
+         (Classification.GetField, Classification.GetFieldType,
+         Classification.SetFieldInfo): Removed. The field name is stored
+         in the layer, and the type can be retreived by calling
+         Layer.GetFieldType().
+         (Classification._set_layer, Classification.GetLayer): Removed.
+         Classifications no longer have a parent layer.
+         * Thuban/Model/layer.py (Layer.Destroy): Unsubscribe from the
+         classification.
+         (Layer.SetShapeStore): Reset the classification first while
+         we still have the old shape store to work with.
+         (Layer.GetClassificationField, Layer.SetClassificationField):
+         New. Method for getting/setting the field to classify on.
+         (Layer.SetClassification): Simplified now that the layer
+         simply has to hold a reference to the classification and not
+         tell the classification who owns it.
+         Fixes RTbug #2023.
+         * Thuban/Model/load.py (SessionLoader.start_classification):
+         Set the field name on the layer, not the classification.
+         * Thuban/Model/messages.py: Add CLASS_CHANGED for when a
+         classification is modified.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Get the field name and type from the layer.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Renamed
+         parameter records to rows and add docstring. Fixes RTbug #1997.
+         * Thuban/UI/classgen.py (ClassGenDialog.OnOK): Use a fixed
+         ramp when we need to fix certain values of a ramp rather than
+         using the old fixes parameter. Fixes RTbug #2024.
+         * Thuban/UI/classifier.py (ClassGrid.CreateTable): Add fieldType
+         parameter.
+         (ClassTable.Reset): Add fieldType parameter and use it, rather
+         than asking the classification.
+         (Classifier.__init__): Remember the original class's field
+         and ask the layer for the field type, rather than the classification.
+         (Classifier.__SetGridTable): Retrieve the field and field type
+         for the table because they are not in the classification.
+         (Classifier._OnTry, Classifier._OnRevert): Set the classification
+         field on the layer in addition to the classification itself.
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Get the
+         classification field from layer.
+         * Thuban/UI/viewport.py (ViewPort.find_shape_at): Get the
+         classification field from layer. Split up tests and remove
+         *-imports. Fixes RTbug #1992.
+         * test/test_classgen.py (TestFixedRamp): Test for the FixedRamp class.
+         * test/test_classification.py
+         (TestClassification.test_classification): Remove tests for methods
+         that no longer exist.
+         * test/test_layer.py (SetShapeStoreTests.setUp): Classification
+         __init__ no longer has a field parameter, use SetClassificationField.
+         (SetShapeStoreTests.test_sanity): Use layer object to get class
+         field info.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Use
+         SetClassificationField on layer to set class field info.
+         * test/test_viewport.py: Renamed from test/test_view.py.
+-07-16  Jan-Oliver Wagner <[email protected]>
+         * Doc/manual/thuban-manual.xml: Added authors and an initial
+         coarse structure.
+-07-15  Bernhard Herzog  <[email protected]>
+         * test/support.py (FloatComparisonMixin): This is a mix-in class
+         and therefore should not be derived from any other class.
+         * test/test_range.py (RangeTest): FloatComparisonMixin is a
+         mix-in, so derive from TestCase as well.
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Rework the
+         draw_func handling a bit to remove one layer of indirection. This
+         makes the renderer about 10% faster in the non-classifying case
+         and the code a bit cleaner
+         (MapRenderer.draw_point_shape): Add the pen and brush parameters
+         and set them in the dc. Now the draw_point_shape method and
+         wxproj's draw_polygon_shape function have basically the same
+         signature so that both can be directly used as draw_func
+-07-15  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/save.py (SessionSaver.write_classification): Encode
+         string values (in addition to the labels) as UTF 8
+         * Thuban/Model/load.py (SessionLoader.start_clpoint): Decode the
+         values if the field type is string
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): Test
+         saving a session with non-ascii string classification values.
+         * test/test_load.py (TestClassification.file_contents)
+         (TestClassification.test): Check for non-ascii values in string
+         classifications
+-07-14  Jonathan Coles   <[email protected]>
+         * test/test_view.py: New. Tests for ViewPort.
+-07-14  Frank Koormann   <[email protected]>
+         * Thuban/Model/load.py (SessionLoader.start_map): Encode map
+         title to latin1.  Fixes https://intevation.de/rt/webrt?serial_num=2013
+         * test/test_load_0_8.py (TestUnicodeStrings): New, test load of
+         unicode strings from session file: session title, map title and
+         projection name.
+-07-10  Jonathan Coles   <[email protected]>
+         * Thuban/UI/viewport.py (Tool.MouseUp): Should have called
+         drag_stop, not drag_move when the mouse is released.
+-07-10  Jonathan Coles   <[email protected]>
+         The most important part of this is the seperation of view.py into
+         two pieces. viewport.py now has a class called ViewPort which
+         contains all the non-wx parts of view.py and can therefore be
+         tested. view.py contains only the wx-specific parts and is fairly
+         simple.
+         * Thuban/UI/view.py: Stripped out all non-wx functionality. Fixes
+         RTTbug #1992.
+         * Thuban/UI/viewport.py: New. Contains non-wx view functionality.
+         RTTbug #1992.
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles):
+         Added 'fixes' parameter so that property attributes can
+         be held constant over the generated classification groups.
+         (CustomRamp.GetProperties): Remove unused variables.
+         * Thuban/Model/map.py (Map.SetProjection): Send the old
+         projection as an argument to listeners of the MAP_PROJECTION_CHANGED
+         event.
+         * Thuban/Model/table.py (table_to_dbf, table_to_csv): Added 'records'
+         parameter which is a list of records that restricts which
+         records are saved. Fixes RTbug #1997.
+         * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
+         Port exception dialog from GREAT-ER. Fixes RTbug #1993.
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__): Add controls
+         to allow the user to fix line color/width on generated groups.
+         (ClassGenDialog.OnOK): Use new 'fixes' parameter of the generate_*
+         functions to optionally fix group properties.
+         * Thuban/UI/main.py (main): Set exception hook to the
+         ShowExceptionDialog. Fixes RTbug #1993.
+         * Thuban/UI/mainwindow.py (MainWindow.ShowTableView): Raise
+         the table window when it is selectd to be shown.
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): Add an
+         Export Selection button and move the export buttons underneath
+         the table.
+         (QueryTableFrame.UpdateStatusText): Added event argument so
+         that it can respond to grid selection events. The status text
+         is now updated even when the table is not associated with a
+         layer as was previously assumed.
+         (QueryTableFrame.OnGridSelectRange, OnGridSelectCell): Removed.
+         UpdateStatusText responds to these events.
+         (QueryTableFrame.OnSaveAs): Renamed to doExport.
+         (QueryTableFrame.doExport): Helper function that saves the
+         entire table, or selected rows, to a file.
+         (QueryTableFrame.OnExport, QueryTableFrame.OnExportSel): New.
+         Respond to export button events and call doExport.
+         * extensions/thuban/gdalwarp.cpp (ProjectRasterFile): Make sure
+         the function doesn't return NULL without first setting a Python
+         Error.
+         * test/runtests.py (main): Only print "Unknown option" for
+         unsupported options.
+         * test/support.py (FloatComparisonMixin.assertFloatEqual): Take
+         optional epsilon argument to specify floating point accuracy.
+         (FloatComparisonMixin.assertFloatSeqEqual): Call assertFloatEqual
+         for each item test.
+         * test/test_csv_table.py (TestCSVTable.test_table_to_cvs): Add
+         tests for saving selected records.
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         tests for saving selected records.
+         * test/test_map.py (TestMapWithContents.test_set_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_session.py
+         (TestSessionWithContent.test_forward_map_projection):
+         MAP_PROJECTION_CHANGED events send the old projection.
+         * test/test_table.py (TableTest): Update tests to use non-deprecated
+         functions.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientTableBase.Width): The type
+         constants in the column objects are the standard ones defined in
+         the table module.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transienttable_to_dbf): New. Test whether
+         exporting transient tables as DBF works. This should catch the bug
+         just fixed in TransientTableBase.Width.
+-07-08  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/classgen.py (CustomRamp.GetProperties): Compute the
+         interpolated colors correctly.
+         * test/test_classgen.py (TestCustomRamp.test_color_interpolation):
+         New. Test case for the fix in classgen.py
+-07-08  Bernhard Herzog  <[email protected]>
+         * test/runtests.py (main): Make the default output less verbose
+         and add a verbosity option (-v) to get the old output
+-07-08  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.9.dtd: New. This will become the DTD for
+.9.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.JoinType):
+         New. Return the join type
+         * Thuban/Model/save.py (SessionSaver.write_session): Use new 0.9
+         DTD
+         (SessionSaver.write_data_containers): Save the join type for
+         joined tables
+         * Thuban/Model/load.py (SessionLoader.__init__): Add the new 0.9
+         namespace
+         (SessionLoader.start_jointable): Handle the jointype attribute
+         * test/test_load_0_8.py: New. Effectively a copy of test_load.py
+         as of Thuban 0.8. These are now tests to determine whether Thuban
+         can still read files generated by Thuban 0.8
+         * test/test_load.py (LoadSessionTest.dtd)
+         (TestSingleLayer.file_contents)
+         (TestLayerVisibility.file_contents, TestLabels.file_contents)
+         (TestLayerProjection.file_contents)
+         (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
+         (TestJoinedTable.file_contents)
+         (TestLoadError.file_contents): Update for new DTD
+         (TestJoinedTable.file_contents, TestJoinedTable.setUp): Add test
+         for new join type attribute
+         * test/test_save.py (SaveSessionTest.dtd)
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer)
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): Update for new DTD
+         (SaveSessionTest.test_joined_table): Add test for new join type
+         attribute
+-07-04  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (_find_dbf_column_names): New. Helper
+         function for table_to_dbf
+         (table_to_dbf): Deal with names longer than the 10 character limit
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): Add
+         doc-string
+         (TestTableToDBF.test_table_to_dbf_long_col_names): New test for
+         long column names
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml: Fix the CVS Revision Tag syntax
+-07-03  Bernhard Herzog  <[email protected]>
+         * Doc/manual/thuban-manual.xml, Doc/manual/README: New. Skeleton
+         for the Thuban manual and README with some basic information about
+         the manual
+-07-03  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__init__):
+         Update doc-string
+         (TransientJoinedTable.create): Do not modify the column objects of
+         the input tables in place and copy all columns of the input tables
+         into the joined table after all.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         Update to reflect the new behavior
+         (TestTransientTable.test_transient_joined_table_name_collisions_dont_modify_in_place):
+         New test case for a bug which modified the column objects in place
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): Make sure maxValue isn't less than
+         one, otherwise we could divide by zero.
+         * test/test_classgen.py (ClassGenTest.doClassRangeTest,
+         ClassGenTest.doClassSingleTest): Call doBoundsTest to
+         check the end classification groups against the
+         proper property values.
+         (ClassGenTest.doBoundsTest): New. Checks the first and
+         last classification groups to make sure their properties
+         are the correct upper and lower bounds for a color ramp.
+-07-02  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (generate_singletons,
+         generate_uniform_distribution, generate_quantiles,
+         GenQuantiles0): The denominator was one to high when
+         calculating the index for the ramp causing the index
+         to never to reach one.
+-07-02  Jonathan Coles   <[email protected]>
+         Changed the singature of ClassGroupRange.__init__ and
+         ClassGroupRange.SetRange() so that the min/max values are
+         passed as a tuple. This makes a better calling scheme for
+         when a Range object is passed instead.
+         * Thuban/Model/classgen.py: Fixed parameters to
+         ClassGroupRange constructor.
+         * Thuban/Model/classification.py (ClassGroupRange.__init__):
+         Consolidate the min/max parameters into a single _range which
+         can either be a tuple or a Range object.
+         (ClassGroupRange.SetRange): Consolidate the min/max parameters
+         into a single _range which can either be a tuple or a Range object.
+         * Thuban/Model/load.py (SessionLoader.start_clrange): Fix
+         call to ClassGroupRange constructor to use a tuple.
+         * Thuban/Model/layer.py (Layer.SetClassification): Switch
+         the classification instance variable to the new class
+         before calling _set_layer otherwise subscribers to a
+         LAYER_CHANGED event will not see any difference.
+         * test/test_classification.py: Fix tests of ClassGroupRange
+         so that they use the new signature.
+         * test/test_load.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_load_0_2.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+         * test/test_save.py: Fix use of ClassGroupRange so that it
+         uses the new signature.
+-07-01  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Fixes RTbug #1972, 1971.
+         Import used objects/class from color.
+         (generate_singletons): We don't
+         need the numGroups parameter anymore because we are using
+         the new ramps with GetProperties().
+         (generate_uniform_distribution): Use new ramp method
+         GetProperties().
+         (generate_quantiles, GenQuantiles0): Use new ramp method
+         GetProperties().
+         (CustomRamp.SetNumGroups): Removed. The ramps now map
+         a value from 0 to 1 to class properties so the number
+         of groups is not needed ahead of time.
+         (CustomRamp.next): Removed. CustomRamp does not support
+         interation anymore.
+         (CustomRamp.GetProperties): Returns a ClassGroupProperties
+         object based on the index value from 0 to 1 that is
+         passed to it.
+         (GreyRamp, RedRamp, GreenRamp, BlueRamp, GreenToRedRamp):
+         Made into instances of Monochromatic class instread of
+         deriving from it.
+         (HotToCold.SetNumGroups): Removed. See CustomRamp.
+         (HotToCold.next): Removed. See CustomRamp.
+         * Thuban/Model/classification.py: Fixes RTbug #1973, 1971.
+         (Classification.SetField, Classification.SetFieldType):
+         Replaced with SetFieldInfo.
+         (Classification.SetFieldInfo): New. Does a better job of
+         what SetField and SetFieldType used to do by combining
+         their function since they should really always be done
+         at the same time.
+         (Classification.SetLayer): Renamed to _set_layer.
+         (Classification._set_layer): Should only be called from
+         Layer's SetClassification. This does not cause a recursive
+         call as SetLayer did because we know that Layer knows about
+         the classification.
+         * Thuban/Model/color.py: Fixes RTbug #1971.
+         (_Transparent): Renamed from Transparent so it doesn't
+         conflict with the module variable.
+         (Transparent, Black): Renamed from Color.Transparent,
+         Color.Black so they are not class variables.
+         * Thuban/Model/layer.py: Fixes RTbug #1971, 1973.
+         (Layer.Destroy): We don't need to call SetClassification
+         anymore to clear out the back reference in the classifcation
+         to the layer. It's better to set it to None using _set_layer,
+         and we won't be creating another clas object too.
+         (Layer.SetClassification): Classification._set_layer is not
+         recursive so remove all the locking variables. Also clean
+         up the code so that it remains unchanged if something fails.
+         * Thuban/Model/load.py: Fixes RTbug #1971.
+         (SessionLoader.start_classification): Call
+         Classification.SetFieldInfo().
+         * Thuban/Model/save.py: Removed import of Color which wasn't
+         being used.
+         * Thuban/UI/classgen.py: Fixes RTbug #1972.
+         (ClassGenDialog.__init__): Color ramps are now instances
+         already so we don't need to create any new objects.
+         (ClassGenDialog.OnOK): Check for numGroups is no longer
+         necessary because we never use it.
+         * Thuban/UI/classifier.py: Fixes RTbug #1971.
+         (Classifier.__BuildClassification, Classifier.__SetGridTable):
+         Call Classification.SetFieldInfo() instead of SetFieldType.
+         * Thuban/UI/renderer.py: Fixes RTbug #1971.
+         * Thuban/UI/view.py: Fixes RTbug #1974, 1971.
+         (MapCanvas.__init__): Subscribe to the idle time event. Set
+         background color to white.
+         (MapCanvas.OnPaint): Set a flag indicating that we should
+         render the map during idle time. If we already have a bitmap
+         just draw it now.
+         (MapCanvas.OnIdle): New. Render the map only during idle time.
+         This also fixes a problem with the busy cursor under gtk.
+         * test/test_classgen.py (ClassGenTest.test_generate_singletons):
+         Fix calls to generate_singletons because the signature changed.
+         * test/test_classification.py: Fix color references and
+         change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+         * test/test_load.py: Fix color references.
+         * test/test_load_0_2.py: Fix color references.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer):
+         Change calls to Classification.[SetField|SetFieldType] to
+         SetFieldInfo.
+-07-01  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_with_equal_column_names):
+         New. Test join of two tables with partly equal column names.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create):
+         If duplicates in left and right tables column names are found,
+         append '_' (underscores) to the name until it is unique.
+         Create always new internal names for the resulting table and reference
+         columns in the join statement with <table>.<column>
+-07-01  Bernhard Herzog  <[email protected]>
+         * test/test_transientdb.py
+         (TestTransientTable.test_transient_joined_table_same_column_name):
+         New. Test whether joining on columns with the same names in both
+         tables works.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.create): Make
+         sure to use the right internal names even when joining on field
+         with the same names in both tables. Also, detect duplicate names
+         in the joined table correctly.
+-07-01  Frank Koormann   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Reverse List of layers to render in same order as in desktop legend.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py (make_tuple): Takes a version string
+         and splits it into a tuple of at most three integers.
+         Used make_tuple() to make tuple versions of the version
+         numbers.
+         * Thuban/UI/about.py: Add Thuban email addresses.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: SQLite/PySQLite version dependencies
+         were too high.
+-06-30  Jonathan Coles   <[email protected]>
+         * Thuban/version.py: Update version to 0.8.1
+         * MANIFEST.in: Added Projections so that default.proj is
+         included.
+-06-26  Jonathan Coles   <[email protected]>
+         New About box with lots more information including library
+         versions and credits. More/better version checking before
+         Thuban starts.
+         * Thuban/UI/about.py: New. New About box that displays
+         library version information and credits.
+         * Thuban/version.py: Added new 'versions' dictionary which
+         contains the verions of various libraries which are checked
+         when the module loads.
+         (verify_versions): Check all version numbers and returns
+         a list of errors.
+         * Thuban/UI/classifier.py (Classifier.__EnableButtons):
+         Reset the status of the buttons as the situation warrants,
+         but in a better more reliable way by not relying on the
+         current status to determine what needs to change.
+         * Thuban/UI/main.py (wxCHECK_VERSION): Removed. Not needed.
+         (verify_versions): Remove most of the code since it is
+         now in Thuban.version.verify_versions.o
+         * Thuban/UI/mainwindow.py (MainWindow.About): Call new
+         About box in Thuban.UI.about.
+         * extensions/thuban/gdalwarp.cpp (get_gdal_version): New.
+         Returns the version of gdal library being used as a string.
+         * extensions/thuban/wxproj.cpp (check_version, check_version_gtk):
+         Removed.
+         (get_proj_version): Return the version of PROJ that the file
+         was compiled with.
+         (get_gtk_version): Return th version of GTK that the file
+         was compiled with.
+-06-25  Jonathan Coles   <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.EditSymbol): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         (ClassGroupPropertiesCtrl.DoEdit): The parent
+         of the SelectPropertiesDialog should be self so the window
+         appears on top.
+         * Thuban/UI/resource.py: Cleaned up how we determine file
+         extensions.
+         (GetImageResource): Return an wxImage from our Resources.
+-06-24  Jonathan Coles   <[email protected]>
+         * Thuban/UI/renderer.py (ExportRenderer.render_legend):
+         Check that a layer has a classification before trying
+         to get it. Raster layers don't have classifications.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.py: Add Resources/XML to resource list.
+-06-23  Jonathan Coles   <[email protected]>
+         * setup.cfg: Fix copyright dates
+-06-23  Jonathan Coles   <[email protected]>
+         * MANIFEST.in: Update with Resources/XML
+         * setup.py: Don't include Locale resources yet as we don't
+         have any and it causes problems building the distribution
+         for Windows. Update version to 0.8.0.
+         * Doc/thuban.dtd: Removed since it is now in Resources/XML.
+         * Thuban/UI/mainwindow.py: Add blank line at the end because
+         file was not being read correctly building the Windows
+         distribution.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.About): Fix text.
+         * Thuban/version.py: Temporarily update longversion for
+         the 0.8 release so that it doesn't have the cvs revision.
+-06-23  Jonathan Coles   <[email protected]>
+         * Thuban/UI/common.py (ThubanBeginBusyCursor): Call wxSafeYield
+         to make sure that we don't create reentrant possibilities with
+         wxYield.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxBeginBusyCursor()
+         directly to avoid the wxSafeYield() call which generates an
+         OnPaint event causing infinite recursion. Don't try to catch
+         exception anymore. This was for before there were limits on map
+         scaling.
+-06-23  Bernhard Herzog  <[email protected]>
+         Bug fix for RT #1961:
+         * Thuban/Model/load.py (SessionLoader.start_derivedshapesource):
+         Register DerivedShapestores with the session
+         * Thuban/Model/session.py (Session.Tables): Make sure each table
+         is only listed once.
+         * test/test_load.py (TestJoinedTable.test): Add check_format call.
+         Update file contents to match the one written out.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/xmlsupport.py (SaxEventLister.startElementNS)
+         (SaxEventLister.endElementNS): Do not include the qname. Python
+.2.1 and 2.2.2 and 2.2.3 differ in this regard. In 2.2.1 qname it
+         is (presumably incorrectly) None, whereas it's a string with the
+         element name in the later versions.
+         * test/test_xmlsupport.py (TestEventList.test_even_list_simple)
+         (TestEventList.test_even_list_namespace): Update tests to reflect
+         the new behaviour
+         (TestEventList.test_even_list_id_normalization): Fix doc-string
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/layer.py (BaseLayer.HasShapes): New. Overridden
+         by deriving classes to determine if that layer supports shapes.
+         (Layer): Override HasShapes and return true.
+         * Thuban/UI/classgen.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (GenUniquePanel._OnRetrieve): Set busy cursor while retrieving
+         table data.
+         * Thuban/UI/common.py (ThubanBeginBusyCursor, ThubanEndBusyCursor):
+         New. Wrappers around the wxWindows functions that allow us to
+         make additional calls such as wxYield which gives the native
+         system a chance to update the cursor correctly.
+         * Thuban/UI/tableview.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         * Thuban/UI/view.py: Use Thuban[Begin|End]BusyCursor()
+         instead of a direct call to wx[Begin|End]CusyCursor().
+         (MapCanvas.find_shape_at): Check if the current search layer
+         support shapes, otherwise go on to the next layer.
+         * test/test_layer.py: Add tests in each type of layer for
+         HasClassification() and HasShapes()
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Call wxYield after
+         turning on the busy cursor to allow the system to change the
+         cursor before we begin painting. This fixes a problem that
+         was occuring only under GTK. Fixes RTbug #1840.
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban-0.8.dtd: New DTD for the new file format
+         version.
+         * Thuban/Model/save.py (sort_data_stores): New. Make topological
+         sort of the data sources so they can be written with sources that
+         data sources that depend on other data sources come after the
+         sources they depend on.
+         (SessionSaver.__init__): Add idmap instance variable to map from
+         objects to the ids used in the file.
+         (SessionSaver.get_id, SessionSaver.define_id)
+         (SessionSaver.has_id): New. Methods to manage the idmap
+         (SessionSaver.write): Use thuban-0.8.dtd
+         (SessionSaver.write_session): Add a namespace on the session and
+         write out the data sources before the maps.
+         (SessionSaver.write_data_containers): New. Write the data
+         containers.
+         (SessionSaver.write_layer): Layer elements now refer to a
+         shapestore and don't contain filenames anymore.
+         * Thuban/Model/load.py (LoadError): Exception class to raise when
+         errors in the files are discovered
+         (SessionLoader.__init__): Define dispatchers for elements with a
+         thuban-0.8 namespace too.
+         (SessionLoader.check_attrs): New helper method to check and
+         convert attributes
+         (AttrDesc): New. Helper class for SessionLoader.check_attrs
+         (SessionLoader.start_fileshapesource)
+         (SessionLoader.start_derivedshapesource)
+         (SessionLoader.start_filetable, SessionLoader.start_jointable):
+         Handlers for the new elements in the new fileformat
+         (SessionLoader.start_layer): Handle the shapestore attribute in
+         addition to filename.
+         (SessionLoader.start_table, SessionLoader.end_table): Removed.
+         They were never used in the old formats and aren't needed for the
+         new.
+         * Thuban/Model/session.py (Session.DataContainers): New method to
+         return all "data containers", i.e. shapestores and tables
+         * test/xmlsupport.py (SaxEventLister.__init__)
+         (SaxEventLister.startElementNS, sax_eventlist): Add support to
+         normalize IDs.
+         * test/test_xmlsupport.py
+         (TestEventList.test_even_list_id_normalization): New test case for
+         id normalization
+         * test/test_load.py (LoadSessionTest.check_format): Use ID
+         normalization
+         (LoadSessionTest.thubanids, LoadSessionTest.thubanidrefs): New
+         class atrributes used for ID normalization
+         (TestSingleLayer, TestLayerVisibility, TestLabels.test)
+         (TestLayerProjection.test, TestRasterLayer.test): Adapt to new
+         file format
+         (TestJoinedTable): New test for loading sessions with joined
+         tables.
+         (TestLoadError): New. Test whether missing required attributes
+         cause a LoadError.
+         * test/test_save.py (SaveSessionTest.thubanids)
+         (SaveSessionTest.thubanidrefs): New class attributes for ID
+         normalization in .thuban files.
+         (SaveSessionTest.compare_xml): Use id-normalization.
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Adapt to new file format.
+         (SaveSessionTest.testLayerProjection): The filename used was the
+         same as for testSingleLayer. Use a different one.
+         (SaveSessionTest.test_dbf_table)
+         (SaveSessionTest.test_joined_table): New test cases for saving the
+         new data sources structures.
+         (TestStoreSort, MockDataStore): Classes to test the sorting of the
+         data stores for writing.
+         * test/runtests.py: Add CVS keywords
+-06-20  Jonathan Coles   <[email protected]>
+         * test/test_session.py
+         (UnreferencedTablesTests.test_unreferenced_tables_with_joins):
+         Use the cultural_landmark-point.dbf file for the store so that
+         the table rows and shape count match.
+-06-20  Jonathan Coles   <[email protected]>
+         * Thuban/Model/data.py (DerivedShapeStore.__init__): Raise
+         an exception if the number of shapes is different from the
+         number of rows in the table. Address RTbug #1933.
+         * test/test_layer.py (TestLayer.test_derived_store): Add
+         a test for the new exception in DerivedShapeStore.__init__.
+         * test/support.py (FloatTestCase): Removed since there is
+         already FloatComparisonMixin. Fixes RTbug #1954.
+         (FloatComparisonMixin.assertFloatEqual): Include test for
+         infinity that was part of FloatTestCase.
+         * test/test_range.py (RangeTest): Inherit from
+         support.FloatComparisonMixin now that we don't have
+         support.FloatTestCase.
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_save.py (SaxEventLister, sax_eventlist): Removed. Use
+         the implementation in xmlsupport instead.
+         (SaveSessionTest.compare_xml): sax_eventlist is now in xmlsupport
+         * test/test_proj.py: Import sax_eventlist from xmlsupport instead
+         of test_save
+-06-20  Bernhard Herzog  <[email protected]>
+         * test/test_load.py (LoadSessionTest.check_format): New helper
+         method to make sure the test files we load might have been written
+         by the current thuban version.
+         (ClassificationTest.TestLayers, TestSingleLayer.test)
+         (TestLayerVisibility.test, TestClassification.test)
+         (TestLabels.test, TestLayerProjection.test, TestRasterLayer.test):
+         Add check_format() calls and fix the thuban data to match the data
+         that would be written by saving the session loaded from it.
+         * test/xmlsupport.py (SaxEventLister, sax_eventlist): Copies of
+         the same class and function in test_save.
+         * test/test_xmlsupport.py (TestEventList): New. test cases for
+         sax_eventlist
+-06-20  Bernhard Herzog  <[email protected]>
+         * Resources/XML/thuban.dtd: Add comment about which versions of
+         Thuban are covered by this DTD
+         (map): Fix content model for layers and raster layers. There can
+         be any number or layers and raster layers in any order.
+-06-20  Jonathan Coles   <[email protected]>
+         This is mainly about fixing RTbug #1949.
+         * Thuban/Model/classification.py: Remove "from __future__"
+         import statement since python 2.2 is the earliest supported
+         version.
+         * Thuban/Model/proj.py (Projection.GetProjectedUnits): New.
+         Currently returns PROJ_UNITS_METERS or PROJ_UNITS_DEGREES
+         depending on the units this projection *forwards* into.
+         * Thuban/Model/save.py (SessionSaver.write_classification):
+         Remove unnecessary use of lambdas and nested functions.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Do scale
+         adjustment here if the map projection uses degrees.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Remove
+         scale adjust code since it is now done before calling
+         this method. Don't do anything if the map projection
+         is None.
+-06-19  Bernhard Herzog  <[email protected]>
+         Move version specific load tests to their own file.
+         * test/test_load.py: Expand the doc-string to explain a bit how to
+         handle file format changes.
+         (TestClassification.test): Update the docstring as this test is
+         not about Thuban 0.2 anymore.
+         * test/test_load_0_2.py: New file with the load tests for thuban
+         files created with Thuban 0.2 and earlier.
+-06-19  Bernhard Herzog  <[email protected]>
+         Add XML validation to some of the tests. Validation will only be
+         done if pyRXP is installed (http://reportlab.com/xml/pyrxp.html).
+         To make the DTD available to the test cases it's moved into
+         Resources/XML
+         * Resources/XML/thuban.dtd: New. This is now the real Thuban DTD
+         for versions up to and including 0.2. Two slight changes: added an
+         encoding specification and fixed the comment which refered to
+         GRASS, not Thuban
+         * test/xmlsupport.py: New support module for tests involving XML.
+         Currently there's a mix-in class for XML validation.
+         * test/test_xmlsupport.py: New. Tests for the xmlsupport module
+         * test/test_save.py (SaveSessionTest): Derive from ValidationTest
+         so that we can validate the
+         (SaveSessionTest.testEmptySession)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testSingleLayer)
+         (SaveSessionTest.testLayerProjection)
+         (SaveSessionTest.testRasterLayer)
+         (SaveSessionTest.testClassifiedLayer): Validate the generated XML
+         * test/runtests.py (main): Call print_additional_summary instead
+         of print_garbage_information
+         * test/support.py (resource_dir): New function to return the
+         "Resource" subdirectory
+         (print_additional_summary): New function to combine several
+         summary functions
+         (run_tests): Use print_additional_summary instead of calling
+         print_garbage_information directly
+-06-19  Bernhard Herzog  <[email protected]>
+         * Doc/thuban.dtd (classification): Correct the content model of
+         the classification element.
+         (projection): Add the "name" attribute
+-06-19  Frank Koormann   <[email protected]>
+         MERGE from the greater-ms3 branch.
+         * Thuban/UI/scalebar.py (ScaleBar.DrawScaleBar): Apply conversion to
+         scale if projection is latlong to get better estimate.
+         Fix problem of hidden properties dialog under windows after double
+         click on layer tree:
+         The tree control always gets an Expanded / Collapsed event after
+         the ItemActivated  on double click, which raises the main window again.
+         We add a second ItemActivated event to the queue, which simply
+         raises the already displayed window.
+         * Thuban/UI/legend.py (LegendTree.__init__): Instance variable
+         raiseProperties initialized to prevent endless loops
+         (LegendTree._OnItemActivated): Depending on self.raiseProperties
+         simply raise the properties or open the dialog and issue a second
+         event.
+-06-18  Jonathan Coles   <[email protected]>
+         * setup.py: Fix a few problems that occured under Windows.
+-06-18  Jonathan Coles   <[email protected]>
+         When Thuban loaded the map was redrawn twice because the
+         legend was being opened after the mainwindow was created
+         and not during its creation. This meant the map was drawn
+         initially and then had to be redrawn when the legend
+         caused the display to change. Now the legend is opened
+         in the mainwindow constructor which resolves this issue.
+         Also, although we were checking for the existence of
+         gdal and gdalwarp modules, the gdalwarp extension was
+         still being compiled (which may fail if the system doesn't
+         have gdal installed). the build_ext command to setup.py
+         now accepts the flags --with-gdal and --without-gdal.
+         If --without-gdal is specified setup.py will try to
+         use the gdal parameters specified by gdal-config. Under
+         windows, those parameters have to be set in setup.py
+         as with proj4 an wxWindows.
+         * setup.py: Use a list instead of seperate variables for
+         extension parameters so we can create a generic function
+         that runs an appropriate *-config script.
+         (run_cs_script): Renamed from run_wx_script and modified
+         to accept a second argument which is a list of lists to
+         be filled in by the values returned from running the command.
+         (thuban_build_ext): New. Extends the build_ext command and
+         provides the options --with-gdal/--without-gdal which then
+         optionally includes the gdalwarp extension.
+         * Thuban/Model/resource.py: First check if we can import
+         the gdalwarp Thuban extension before checking for gdal.
+         Also added some comments.
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Check if
+         the map is None which may be the case if none has been loaded
+         yet.
+         * Thuban/UI/main.py (main): Remove call to ShowLegend.
+         * Thuban/UI/mainwindow.py (MainWindow.__init__): Call ShowLegend().
+         * Thuban/UI/renderer.py: Check for gdal support before importing
+         gdalwarp.
+         (MapRenderer.render_map): Only try to optimize if we have gdal
+         support otherwise nothing will get drawn.
+         * Thuban/UI/view.py (MapCanvas.FitMapToWindow): This may be called
+         during startup before a map has been created. Check if map is None
+         before using it and do nothing if it is.
+-06-17  Jonathan Coles   <[email protected]>
+         Fix the problem with raster layers under Windows that caused
+         Thuban to crash. The view should respond to layer projection
+         changed events to update the display. Changes to a projection
+         should not cause the map to be set to full extent.
+         * Thuban/UI/view.py (MapCanvas.__init__): New instance variable
+         current_map_proj to remember the current map projection so that
+         when the projection changes we know what the previous projection
+         was.
+         (MapCanvas.SetMap): Unsubscribe and subscribe to
+         LAYER_PROJECTION_CHANGED events.
+         (MapCanvas.projection_changed): Split into two methods that respond
+         to map and layer projection changes.
+         (MapCanvas.map_projection_changed): New. Takes the current view and
+         projects it using the new projection. This does not cause the
+         map to be redrawn at full extent.
+         (MapCanvas.layer_projection_changed): New. Cause a redraw which
+         will draw each layer in its new projection.
+         * extensions/thuban/bmpdataset.cpp (BMPDataset::Open): Call
+         VSIFClose() not VSIFCloseL() to close the file. Fixes a crash
+         under Windows.
+         * extensions/thuban/gdalwarp.cpp (MFILENAME): Padding should be
+         to twice sizeof(void*) because there are two digits for each
+         hex byte.
+-06-16  Bernhard Herzog  <[email protected]>
+         Update to the layer interface: Direct access to the table,
+         shapetable, shapefile and filename attributes is now actively
+         deprecated by issuing deprecation warnings for all places where
+         this happens.
+         * Thuban/Model/layer.py (Layer.__getattr__): New. Implement access
+         to the instance variables table, shapetable, shapefile and
+         filename via __getattr__ so that we can issue a deprecation
+         warning.
+         (Layer.SetShapeStore): Don't set the deprecated instance variables
+         any more
+         (Layer.SetShapeStore): Don't use deprecated layer instance
+         variables
+         (Layer.Destroy): No need to explicitly remove the instance
+         variables any more
+         (Layer.GetFieldType, Layer.Shape): Don't use deprecated layer
+         instance variables
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__)
+         (GenUniformPanel._OnRetrieve, GenUniquePanel._OnRetrieve)
+         (GenQuantilesPanel.GetList, GenQuantilesPanel.OnRetrieve): Don't
+         use deprecated layer instance variables
+         * Thuban/UI/classifier.py (Classifier.__init__): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/identifyview.py (IdentifyListCtrl.selected_shape)
+         (IdentifyGridCtrl.selected_shape): Don't set the deprecated layer
+         instance variables
+         * Thuban/UI/tableview.py (LayerTableGrid.select_shapes): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Don't use
+         deprecated layer instance variables
+         * Thuban/Model/save.py (SessionSaver.write_layer): Don't use
+         deprecated layer instance variables
+         * Thuban/UI/renderer.py (MapRenderer.draw_shape_layer)
+         (MapRenderer.polygon_render_param): Don't use deprecated layer instance
+         variables
+         * test/runtests.py (main): Turn Thuban's deprecation warnings into
+         errors so that they're cought by the tests
+         * test/test_load.py (TestSingleLayer.test): Don't use deprecated
+         layer instance variables
+-06-16  Jonathan Coles   <[email protected]>
+         Fix a problem under Windows whereby if the user double-clicks on a
+         layer in the legend that tree item will expand or collapse as well
+         as open the layer properties dialog. The state of the tree item
+         should not be affected.
+         * Thuban/UI/legend.py (LegendTree.__init__): Add instance variable
+         preventExpandCollapse and subscribe to expanding and collapsing
+         events.
+         (LegendTree.OnItemExpandCollapse): New. Responds to expanding and
+         collapsing events and will veto the event if it has been triggered
+         by the user double clicking on a layer.
+         (LegendTree._OnItemActivated): Set preventExpandCollapse to indicate
+         that an expanding/collapsing event should be vetoed.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classifier.py (Classifier.OnClose)
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): Unsubscribe the messages
+         in OnClose and not in map_layers_removed or
+         layer_shapestore_replaced to make sure it always happens when the
+         dialog is closed
+-06-13  Jonathan Coles   <[email protected]>
+         This puts back a fix for Windows where a panel is needed so that
+         the background of the table view appears correctly.
+         * Thuban/UI/tableview.py (TableFrame.__init__): Add a panel
+         object that can be used by derived classes to place any
+         controls (including the grid) onto.
+         (QueryTableFrame.__init__): Use the panel as the parent window
+         for all the controls. Reparent the grid so that the panel is
+         the parent. Call UpdateStatusText() to correctly initialize
+         the status bar.
+-06-13  Jonathan Coles   <[email protected]>
+         * Thuban/UI/dialogs.py (ThubanFrame): New: a class that inherits
+         from wxFrame (as opposed to wxDialog like the other classes)
+         but otherwise behaves like the other classes. This is needed
+         for the TableView which isn't really a dialog and needs to
+         have a status bar and control buttons.
+         * Thuban/UI/tableview.py (TableGrid.__init__): Create an
+         instance variable to keep track of how many rows are selected.
+         Subscribe once to the the events we are interested in.
+         (ThubanGrid.OnRangeSelect): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.OnSelectCell): Only handle event if event handling
+         hasn't been turned off.
+         (ThubanGrid.ToggleEventListeners): Rather than subscribe None
+         as an event listener (which changes the event handler stack)
+         simply set an instance variable to False. This is checked in
+         the event handlers.
+         (ThubanGrid.GetNumberSelected): Return the number of currently
+         selected rows.
+         (TableFrame): Inherit from ThubanFrame so we can have a
+         status bar and control buttons.
+         (QueryTableFrame.__init__): Create a status bar. Fixes RTbug #1942.
+         Explicitly set which items are selected in the operator choice and
+         action choice so there is always a valid selection. Fixes RTbug #1941.
+         Subscribe to grid cell selection events so we can update the
+         status bar.
+         (QueryTableFrame.UpdateStatusText): Update the status bar with
+         how many rows are in the grid, how many columns, and how many
+         rows are selected.
+         (QueryTableFrame.OnGridSelectRange, QueryTableFrame.OnGridSelectCell):
+         Call UpdateStatusText when cells are (de)selected.
+         (QueryTableFrame.OnQuery): Use the string value in the value
+         combo if either the selected item index is 0 or if the string
+         cannot be found in the predefined list (this happens if the
+         user changes the text). Fixes RTbug #1940.
+         Only turn off the grid event listeners if there a query comes
+         back with a none empty list of ids. in the case that the list
+         is empty this causes a grid.ClearSelection() call to actually
+         clear the grid selection which causes the selected items in
+         the map to be deselected. Fixes RTbug #1939.
+         * test/test_save.py (XMLWriterTest.Encode): Check return values.
+         Fixes RTbug #1851.
+-06-13  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__): Call
+         self.selected_shape with the current selection to make sure the
+         contents of the dialog are up to date when it's shown for the
+         first time.
+         The dialog used to work without this by luck. The recent fix to
+         the connector module 'broke' a 'feature' the identify view was
+         relying on, i.e that subscribing to a message in response to
+         receiving a message of that type would mean that the new
+         subscriber would also be called for the same message.
+-06-12  Jonathan Coles   <[email protected]>
+         * extensions/thuban/gdalwarp.cpp: Removed debug printing as
+         the image is rendered. Fixes RTbug #1937.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Lib/fileutil.py: As is done under Windows, create the
+         user directory if it doesn't exist on a posix system.
+         Fixes RTbug #1815.
+         * Thuban/Model/resource.py (get_user_proj_files): Moved the
+         called to get_application_dir here, so that the directory
+         will only be called if this method is invoked.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Clear
+         the projfilepath if no projection is selected.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/UI/legend.py (ScaleBarBitmap.__SetScale): Don't draw
+         the scalebar if the current map has no projection set.
+         * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): Set the
+         projfilepath label to just the basename of the projection file
+         rather than include the entire path.
+         * Thuban/Model/resource.py: Fix missed proj functions that
+         needed to be renamed.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classification.py: Removed assert statements that
+         tested if the variable was an instance of Color.
+         * Thuban/Model/color.py (Color): Remove commented code that isn't
+         used.
+         (Transparent): Renamed from NoColor. Doesn't inherit from Color.
+         Fixes RTbug #1835.
+         (Transparent.__eq__, Transparent.__ne, Transparent.__repr): New.
+         Needed now that the class doesn't inherit from Color.
+-06-12  Jonathan Coles   <[email protected]>
+         * test/test_save.py (XMLWriterTest.testEncode): Explicitly
+         check unicode strings.
+         * test/test_layer.py: Check for existence of gdal.
+-06-12  Jonathan Coles   <[email protected]>
+         * Thuban/Model/xmlreader.py: New. Contains the XMLReader class
+         that was in load.py
+         * Thuban/Model/xmlwriter.py: New. Contains the XMLWriter class
+         that was in save.py
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+-06-12  Jonathan Coles   <[email protected]>
+         This is largely a collection of bug fixes. We also handle the
+         case where gdal is not on the system. The XMLReader and XMLWriter
+         classes were moved into there own files to resolve some circular
+         import references and because they shouldn't really be in the
+         file that is dediciated to reading/writing session files since
+         they are also used elsewhere.
+         * Thuban/Model/classgen.py: Renamed functions to follow the
+         function_names_with_underscores style. Fixes RTbug #1903.
+         (calculate_quantiles): Raise ValueError if 'percents' is invalid.
+         * Thuban/Model/layer.py: Import gdal only if it available.
+         (RasterLayer): Handle the case where the gdal library is unavailable.
+         Addresses RTbug #1877.
+         * Thuban/Model/load.py (XMLReader): Moved into seperate file
+         xmlreader.py.
+         * Thuban/Model/save.py (escape, XMLWriter): Moved into seperate
+         file xmlwriter.py.
+         * Thuban/Model/resource.py: Renamed functions to following the
+         function_names_with_underscores style.
+         (has_gdal_support): New function that returns true if the gdal
+         library is available. Addresses RTbug #1877.
+         * Thuban/UI/application.py (ThubanApplication.OpenSession):
+         Display a message box if the gdal library is not available, but
+         only if there are any layers that would use it. Addresses RTbug #1877.
+         * Thuban/UI/classgen.py: Use renamed projection resource functions.
+         (GenUniformPanel.__CalcStepping): Fix a slight discrepency
+         when using integers versus floats.
+         * Thuban/UI/mainwindow.py (_has_gdal_support): New. Used to
+         determine if the "Add Image Layer" menu option should be
+         greyed out or not. Addresses RTbug #1877.
+         * Thuban/UI/projdialog.py: Use renamed projection resource functions.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Only try to
+         optimize if a raster layer is visible. Fixes RTbug #1931.
+         Only draw the raster layer if the gdal library is available.
+         Addresses RTbug #1877.
+         * test/test_classgen.py: Add tests for generate_singletons,
+         generate_uniform_distribution, generate_quantiles. Fixes RTbug #1903.
+         (test_calculate_quantiles): Fix some tests to catch the new
+         ValueError that is raised.
+         * test/test_proj.py: Use renamed projection resource functions.
+         * test/test_save.py (SaveSessionTest.testClassifiedLayer): New
+         test for saving classified layers. Fixes RTbug #1902.
+         (XMLWriterTest): New. Tests the XMLWriter class. Fixes RTbug #1851.
+-06-12  Jan-Oliver Wagner <[email protected]>
+         Fix for http://intevation.de/rt/webrt?serial_num=1900.
+         * Thuban/UI/multiplechoicedialog.py: New. A multiple choice dialog.
+         * Thuban/UI/mainwindow.py: import wxMultipleChoiceDialog from
+         multiplechoicedialog.py rather than from the wxPython library.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): Minor stability
+         update.
+-06-11  Frank Koormann  <[email protected]>
+         * Thuban/Lib/fileutil.py (get_application_dir): New function to
+         determine the absolute .thuban/thuban directory under
+         "posix" (os.expanduser) and "nt" (read AppData registry key).
+         * Thuban/Model/resource.py: Use get_application_dir
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Use get_application_dir.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Subscribe to
+         the messages MAP_LAYERS_REMOVED messages
+         (LayerTableFrame.OnClose): Unsubscribe from it.
+         (LayerTableFrame.map_layers_removed): New. Receiver for
+         MAP_LAYERS_REMOVED. Close the dialog when the layer whose the
+         dialog is showing is removed.
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Lib/connector.py (Connector.Issue): Iterate over a copy
+         of the receivers list so that unsubscribing in a receiver doesn't
+         modify it while iterating over it.
+         * test/test_connector.py
+         (ConnectorTest.test_disconnect_in_receiver): New. Test whether
+         unsubscribing in a receiver works correctly. See docstring for
+         details
+-06-10  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (LAYER_SHAPESTORE_REPLACED): New
+         message.
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Send
+         LAYER_SHAPESTORE_REPLACED when the shapestore changes. A
+         LAYER_CHANGED will still be sent if the classification changes.
+         * Thuban/UI/classifier.py (Classifier.__init__): Add the map as
+         parameter so we can subscribe to some of its messages
+         (Classifier.__init__): Subscribe to the map's MAP_LAYERS_REMOVED
+         and the layer's LAYER_SHAPESTORE_REPLACED
+         (Classifier.unsubscribe_messages): New. Unsubscribe from message
+         subscribed to in __init__
+         (Classifier.map_layers_removed)
+         (Classifier.layer_shapestore_replaced): receivers for the messages
+         subscribed to in __init__. Unsubscribe and close the dialog
+         * Thuban/UI/mainwindow.py (MainWindow.OpenLayerProperties): Pass
+         the map to the Classifier dialog
+         * test/test_layer.py (SetShapeStoreTests): Derive from
+         SubscriberMixin as well so we can test messages
+         (SetShapeStoreTests.setUp): Subscribe to some of the layer's
+         messages
+         (SetShapeStoreTests.tearDown): Clear the messages again
+         (SetShapeStoreTests.test_sanity): Expand the doc-string and check
+         for the modified flag too
+         (SetShapeStoreTests.test_set_shape_store_modified_flag): New test
+         to check whether SetShapeStore sets the modified flag
+         (SetShapeStoreTests.test_set_shape_store_different_field_name)
+         (SetShapeStoreTests.test_set_shape_store_same_field)
+         (SetShapeStoreTests.test_set_shape_store_same_field_different_type):
+         Add tests for the messages. This checks both the new
+         LAYER_SHAPESTORE_REPLACED and the older LAYER_CHANGED
+-06-06  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py: Improved and partly added help texts for
+         the menu items.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Layout reimplemented without panel. Make life easier to fit the list
+         in the dialog.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__init__): Fill the projchoice
+         once on initialisation (Former implementation resulted in multiple
+         entries for each projection).
+         (ProjFrame.__FillAvailList): selectProj as second optional parameter,
+         if set, select the projection found under the specified name. This
+         overwrites any other selection estimate.
+         Removed projchoice filling from this method.
+         (ProjFrame._OnSave, ProjFrame._OnAddToList):
+         Updated call of ProjFrame.__FillAvailList
+         (LCCPanel._DoLayout): Moved parameter controls in more common order.
+         * Resources/Projections/defaults.proj: Extended defaults representing
+         various common European projections.
+-06-05  Frank Koormann  <[email protected]>
+         * Thuban/UI/identifyview.py (IdentifyView.__init__):
+         Use ListCtrl instead of GridCtrl
+         * Thuban/Model/resource.py:
+         Guess location of .thuban directory from tempdir parent directory.
+         * Thuban/UI/application.py (ThubanApplication.read_startup_files):
+         Guess location of .thuban directory from tempdir parent directory.
+-06-04  Bernhard Herzog  <[email protected]>
+         Do not cache the values returned by the tree widget's
+         GetFirstChild and GetNextChild methods because it led to lots of
+         segfaults. The new way requires more brute force but is more
+         reliable.
+         * Thuban/UI/legend.py (LegendTree.__init__): Remove instance
+         variable layer2id
+         (LegendTree.find_layer): New method to do with brute force what
+         layer2id tried to accomplish
+         (LegendTree._OnMsgLayerChanged)
+         (LegendTree._OnMsgLayerTitleChanged, LegendTree.__ShowHideLayer):
+         Use find_layer instead of layer2id
+         (LegendTree.__RemoveLayer, LegendTree.__AddLayer): No need to
+         update layer2id anymore
+         (LegendTree._OnMsgMapLayersRemoved)
+         (LegendTree._OnMsgMapLayersAdded): Get by without layer2id.
+-06-03  Thomas Koester  <[email protected]>
+         * Thuban/Model/classgen.py (GenQuantiles0): New function.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (layer_rename command, table_rename command):
+         New commands.
+         (main_menu): Add the new commands.
+         (MainWindow.TableRename): New. Implementation of the table_rename
+         command.
+         (MainWindow.RenameLayer): New. Implementation of the layer_rename
+         command.
+         * Thuban/Model/session.py (Session.AddTable): call self.changed to
+         set the modified flag
+         * test/test_session.py (TestSessionSimple.test_add_table): Test
+         whether the modified flag is set properly
+         * Thuban/Model/base.py (TitledObject.SetTitle): Call changed
+         instead of issue so that the modified flags get updated.
+         * test/test_base.py (SomeTitledObject): Derive from Modifiable
+         instead of Publisher to reflect reality better and to accomodate
+         the fact that SetTitle now calls changed instead of issue
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/classgen.py (GenQuantilesPanel.GetList): Resource
+         acquisition has to happen before the try in a try-finally.
+-06-02  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree._OnMsgMapLayersRemoved): It's
+         possible that a layer is removed that is not currently selected in
+         the legend so don't check for this.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.Destroy): Set all instance
+         variables to None that have direct or indirect references to
+         shapefiles or dbf files to make sure that they do go away and the
+         files are closed.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.GetRootItem): Reset
+         availImgListIndices when a new image list is created
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/legend.py (LegendTree.__init__): New instance variable
+         changing_selection to indicate whether the LegendTree code itself
+         is currently changing the selection
+         (LegendTree.normalize_selection): New method to normalize the
+         selection by selecting the layer item even if the user clicked on
+         the classification.
+         (LegendTree._OnSelChanged): normalize the selection. This works
+         around a bug in wx which doesn't keep track of the selection
+         properly when subtrees are deleted.
+-05-30  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/view.py (MapCanvas.set_view_transform): Limit the
+         maximum and minimum scale factors.
+         * test/test_classgen.py (ClassGenTest.test): Update to reflect the
+         changes in classgen.py
+-05-30  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py: Remove ClassGenerator class but make
+         all the methods functions. Fixes RTBug #1903.
+         * Thuban/Model/map.py (Map.TopLayer, Map.BottomLayer): Renamed
+         to MoveLayerToTop and MoveLayerToBottom respectively. Fixes
+         RTBug #1907.
+         * Thuban/UI/classgen.py: Use classgen functions that were part
+         of the ClassGenerator class. Put try/finally blocks around
+         code that uses wxBeginBusyCursor()/wxEndBusyCursor(). Fixes
+         RTBug #1904.
+         * Thuban/UI/classifier.py: Remove unused import of ClassGenerator.
+         * Thuban/UI/legend.py: The legend was cleared and repopulated any
+         time something changed which caused some state to be lost such
+         as which children were expanded or collapsed. Fixes RTBug #1901.
+         (LegendTree._OnMsgMapLayersAdded): Add only new layers.
+         (LegendTree.__OnMsgMapLayersRemoved): Remove layers that exist in
+         the legend but not in the map.
+         (LegendTree.__FillTree): Move main functionality out into smaller
+         methods that can be used by other methods.
+         (LegendTree.__FillTreeLayer): Reuse old slots in the image list
+         if they are available.
+         (LegendTree.DeleteAllItems): Renamed from __DeleteAllItems so
+         that we override the wxTreeCtrl method. Iterate over children
+         and call __RemoveLayer.
+         (LegendTree.__AddLayer): New. Add a new layer to the legend.
+         (LegendTree.__RemoveLayer): Remove a layer from the legend.
+         (LegendTree.DeleteChildren): New, overrides wxTreeCtrl method.
+         Should only be called with the id of a layer branch.
+         (LegendTree.GetRootItem): New, overrides wxTreeCtrl method.
+         Returns the root item or creates one if necessary.
+         * Thuban/UI/renderer.py (MapRenderer.draw_raster_layer): Call
+         ProjectRasterFile with tuple arguments instead of strings.
+         * Thuban/UI/tableview.py (QueryTableFrame.OnQuery): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         * Thuban/UI/view.py (MapCanvas.OnPaint): Wrap code
+         with try/finally. Fixes RTBug #1904.
+         (MapCanvas.FitSelectedToWindow): If a single point is selected
+         simply center it on the display. Fixes RTBug #1849.
+         * extensions/thuban/gdalwarp.cpp: Removed code that allowed gdalwarp
+         to be compiled as a standalone app. Now the code can only be
+         called from Python which simplifies the parameter passing.
+         (ProjectRasterFile): Handle Python arguments. Remove code that
+         checks for a destination dataset. Add more clean up code.
+         * test/test_map.py (TestMapWithContents.test_raise_layer_top,
+         TestMapWithContents.test_lower_layer_bottom):
+         Test Map.MoveLayerToTop() and Map.MoveLayerToBottom() respectively.
+         Fixes RTBug #1907.
+         * Thuban/UI/mainwindow.py (MainWindow.ToggleLegend): Apply a full
+         extent to the map when the legend is toggled. Fixes RTBug #1881.
+-05-29  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.OnClose): Bug-fix: Now
+         unsubscribes all that is subcribed in __init__.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.DuplicateLayer)
+         (MainWindow.CanDuplicateLayer): New methods to implement the
+         Layer/Duplicate command.
+         (layer_duplicate command): New.
+         (main_menu): Add layer_duplicate to the Layer menu.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/tableview.py (NullRenderer.Draw): New. Our own
+         renderer so that NULL/None values get displayed differently (by a
+         gray rectangle).
+         (TableGrid.__init__): Override the default renderers
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Set the
+         classification to "None" if the type of the field has changed.
+         * test/test_layer.py (SetShapeStoreTests): New. Class with a few
+         test for the Layer.SetShapeStore method
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/Model/layer.py (Layer.TreeInfo): Fixed a bug (a layer
+         does not necessarily have a filename).
+-05-28  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableClose, MainWindow.TableShow):
+         sort the selection list for the dialog.
+-05-28  Frank Koormann  <[email protected]>
+         * extensions/thuban/wxproj.cpp
+         (project_point): Removed cast to int for projected point coordinates.
+         (shape_centroid): Return last point if all polygon vertices fall
+         to one point.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (_can_unjoin): Add doc-string and cope
+         with layers that don't have shapestores, i.e. raster layers.
+-05-28  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (DBFTable.__init__): Omit the extension
+         when determining the title from the filename.
+         * test/test_dbf_table.py (TestDBFTable.test_title): Update to
+         reflect changes in the way the title is derived from the filename
+-05-28  Frank Koormann  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow):
+         Added wxDEFAULT_DIALOG_STYLE to show table dialog styles.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.delegated_messages): Also
+         delegate SelectedLayer.
+         (MainWindow.LayerUnjoinTable): Implement.
+         (_can_unjoin): New. Helper function for the sensitivity of the
+         layer/unjoin command.
+         * Thuban/Model/data.py (ShapefileStore.OrigShapeStore)
+         (DerivedShapeStore.OrigShapeStore): New. Return the original
+         shapestore. Used to figure out how to unjoin.
+         (DerivedShapeStore.Shapefile): Fix a typo.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog): Extend to handle layer joins as
+         well
+         (JoinDialog.__init__): Use the layer parameter and only build the
+         left choice when a layer is given
+         (JoinDialog.OnJoin): Handle layer joins as well
+         (JoinDialog.OnLeftTable, JoinDialog.OnRightTable): Handle the case
+         that the user selects the "Select..." item. The sensitivitly
+         updating is now in update_sensitivity
+         (JoinDialog.y): New method to refactor the sensitivity update of
+         the join button into its own method.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerJoinTable): Implement.
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (table_close command): Make it sensitive
+         iff there are unreferenced tables in the session
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/messages.py (TABLE_REMOVED): New message.
+         * Thuban/Model/session.py (Session.UnreferencedTables): New method
+         to return tables that are not referenced by other tables or shape
+         stores and can be removed.
+         (Session.RemoveTable): Issue a TABLE_REMOVED message after
+         removing the table
+         * Thuban/UI/mainwindow.py: Remove unused imports
+         (MainWindow.TableClose): Implement.
+         * Thuban/UI/tableview.py (TableFrame.__init__): Subscribe to some
+         messages so that the frame will be automatically closed when a new
+         session is opened or the table is removed.
+         (TableFrame.OnClose): Unsubscribe the Subscriptions made in
+         __init__
+         (TableFrame.close_on_session_replaced)
+         (TableFrame.close_on_table_removed): New. Subscribers that close
+         the window
+         * test/test_session.py (TestSessionMessages.test_remove_table)
+         (TestSessionSimple.test_remove_table): Move the test to
+         TestSessionSimple and add test for the TABLE_REMOVED message
+         (TestSessionBase.setUp): Also subscribe to TABLE_REMOVED
+         (TestSessionSimple.test_unreferenced_tables) New. Test for the
+         UnreferencedTables method.
+         (UnreferencedTablesTests): New. Class with some more sophisticated
+         tests for UnreferencedTables.
+-05-27  Frank Koormann  <[email protected]>
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): The "_S_election"
+         display has some unwanted side effects. Removed again.
+-05-27  Frank Koormann  <[email protected]>
+         * Resources/Bitmaps/legend_icon_layer.xpm: New, icon for legend.
+         * Thuban/UI/legend.py (LegendTree.__FillTree): Use "legend_icon_layer"
+-05-27  Jan-Oliver Wagner <[email protected]>
+         * test/test_menu.py (MenuTest.test): Added test for
+         Menu.RemoveItem().
+         * Thuban/UI/menu.py (Menu.RemoveItem): New. Remove an item from
+         the menu.
+-05-27  Frank Koormann  <[email protected]>
+         Nonmodal dialogs without parent (i.e. they can fall behind the main
+         window)
+         * Thuban/UI/mainwindow.py (MainWindow.OnClose): Explicitly destroy
+         all dialogs in the dialogs dictionary and the canvas.
+         * Thuban/UI/dialogs.py (NonModalNonParentDialog): New class, without
+         parent, i.e. can fall behind other windows.
+         (NonModalDialog.OnClose): Check is dialog is in mainwindow.dialog
+         dictionary before removing it.
+         * Thuban/UI/classifier.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/projdialog.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/tableview.py: Dialog derived from NonModalNonParentDialog
+         * Thuban/UI/tree.py: Dialog derived from NonModalNonParentDialog
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.ShowTableView): New. Open a
+         tableview dialog
+         (MainWindow.TableShow): Use ShowTableView to open the dialogs.
+         Also, don't use the table's titles as the dialog names. The titles
+         aren't guaranteed to be unique.
+         (MainWindow.TableOpen): Open a table view dialog after opening the
+         table
+-05-27  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py: Remove the Table/Hide menu item. Its
+         effect can be achieved by simply closing the window showing the
+         table.
+         (MainWindow.TableHide): Removed.
+         (main_menu): Removed "table_hide"
+-05-27  Frank Koormann  <[email protected]>
+         Fix legend tree display problems under Win32
+         * Thuban/UI/legend.py:  BMP_SIZE_W = 15
+         (LegendTree.__FillTree): Display "legend_icon_map.xpm" with layer title.
+         (LegendTree.__FillTreeLayer): Explicitely set SelectedImage.
+         * Resources/Bitmaps/legend_icon_map.xpm: New icon for legend.
+-05-27  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/menu.py (Menu.InsertSeparator): Additional optional parameter
+         'after' now allows to insert separators almost anywhere in the menu.
+-05-27  Frank Koormann  <[email protected]>
+         * Thuban/UI/tableview.py (QueryTableFrame.__init__): Underline the
+         "S" of selection box label to hint on hot key (Alt-S). Works under
+         Win32 but is ignored under GTK.
+-05-26  Frank Koormann  <[email protected]>
+         * Thuban/UI/projdialog.py (ProjFrame.__do_layout, ProjPanel._DoLayout):
+         Center Choices.
+-05-26  Bernhard Herzog  <[email protected]>
+         Remove the Precision methods again. They're too DBF specific to be
+         part of the table interface and they're only used in table_to_dbf
+         anyway.
+         * Thuban/Model/transientdb.py (TransientTableBase.Width):Use a
+         fixed precision of 12 for doubles.
+         (TransientTableBase.Precision): Removed
+         (AutoTransientTable.Width): Delegate to self.table.
+         * Thuban/Model/table.py (DBFTable.Precision)
+         (MemoryTable.Precision): Removed.
+         (MemoryTable.Width): Use a fixed precision of 12 for doubles.
+         (table_to_dbf): Use a fixed precision of 12 for floats unless the
+         column object specifies something else.
+         * test/test_dbf_table.py (TestTableToDBF.test_table_to_dbf): New.
+         test for table_to_dbf
+-05-26  Bernhard Herzog  <[email protected]>
+         * test/test_transientdb.py
+         (TestTransientTable.run_iceland_political_tests): Fix a comment.
+-05-26  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow.TableOpen): Real
+         implementation. Mark parts of the file format strings for
+         localization.
+         * Thuban/Model/session.py (Session.OpenTableFile): New. Open a dbf
+         file and add the table to the tables managed by the session
+         * test/test_session.py (TestSessionSimple.test_open_table_file):
+         New. test case for OpenTableFile
+-05-26  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/controls.py, Thuban/UI/identifyview.py, Thuban/UI/join.py,
+         Thuban/UI/labeldialog.py, Thuban/UI/mainwindow.py,
+         Thuban/UI/proj4dialog.py, Thuban/UI/tableview.py, Thuban/UI/view.py:
+         Replace the true/false of wxWindows by True/False of Python 2.2.1.
+-05-26  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): If there is
+         already a selection present, update the grid accordingly.
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow): Make the dialog
+         resizeable and increase its initial size.
+-05-26  Frank Koormann  <[email protected]>
+         Table export functionality
+         * Thuban/Model/table.py (DBFTable.Width, MemoryTable.Width):
+         Return width (in characters) for a column.
+         (DBFTable.Precision, MemoryTable.Precision): Return decimal precision.
+         (table_to_dbf): Write table to dbf file.
+         (table_to_csv): Write table to csv file.
+         * Thuban/Model/transientdb.py (TransientTableBase.Width,
+         TransientTableBase.Precision): Return column width and precision.
+         * Thuban/UI/tableview.py (QueryTableFrame.OnSaveAs): Call table_to_dbf
+         or table_to_csv depending on file selection.
+         * test/test_dbf_table.py:
+         Test table_to_dbf (extension of former part of test).
+         * test/test_csv_table.py:
+         Test table_to_csv.
+-05-23  Jan-Oliver Wagner <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Use _() for strings.
+         Use QueryTableFrame instead of TableFrame.
+         * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Prefix the
+         table window with 'Layer Table:' instead of 'Table:'.
+-05-23  Jan-Oliver Wagner <[email protected]>
+         Give all tables a title via mix-in TitledObject.LayerShowTable
+         * Thuban/Model/base.py (TitledObject.SetTitle): Call method 'issue'
+         only if it exists.
+         * Thuban/Model/table.py (DBFTable, MemoryTable): mix-in TitledObject
+         and call its init-method with a default title. Remove Title() method.
+         * Thuban/Model/transientdb.py (TransientTable, TransientJoinedTable,
+         AutoTransientTable): mix-in TitledObject and call its init-method with
+         a default title. Remove Title() method.
+-05-23  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.AddShapeStore): Define
+         AddShapeStore analogously to AddTable.
+         * test/test_session.py (TestSessionSimple.test_add_shapestore):
+         New. Test for AddShapeStore
+-05-23  Jan-Oliver Wagner <[email protected]>
+         Introducing QueryTableFrame and a very coarse ShowTable implementation.
+         * Thuban/UI/tableview.py (LayerTableFrame, QueryTableFrame): Split the
+         class LayerTableFrame into two classes, LayerTableFrame and QueryTableFrame.
+         The latter implements the selection GUI without dependency on a layer.
+         LayerTableFrame now is derived from QueryTableFrame and connects
+         to a layer.
+         * Thuban/UI/mainwindow.py (MainWindow.TableShow): A very coarse
+         implementation that still needs work.
+         * Thuban/Model/layer.py (Layer.TreeInfo): Added filename.
+-05-22  Frank Koormann  <[email protected]>
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__init__):
+         Added "outer_join = False" as optional parameter.
+         (TransientJoinedTable.create): If outer join is true, perform a
+         "LEFT OUTER JOIN" instead of "JOIN", which preserves all records of
+         the left table. Records not matching are filled with 0 / None.
+         * Thuban/UI/join.py (JoinDialog.__init__): Checkbox for outer join.
+         (JoinDialog.OnJoin): Consider outer join check box.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Use exc_info in a
+         somewhat safer way. Storing the traceback in a local variable can
+         lead to memory leaks
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.OnJoin): Make sure to really call
+         the wxMessageDialog's Destroy() method.
+-05-22  Frank Koormann  <[email protected]>
+         * Thuban/UI/join.py (JoinDialog.__init__): Make use of
+         TransientTable.Title()
+-05-22  Frank Koormann  <[email protected]>
+         Join Dialog, initial version.
+         * Thuban/UI/mainwindow.py (MainWindow.TableJoin): Removed print.
+         * Thuban/UI/join.py (JoinDialog): Functional implementation of
+         former framework. Renamed Table1/Table2 to LeftTable/RightTable
+         in all occurences.
+         * Thuban/Model/transientdb.py (TransientJoinedTable.__doc__):
+         Typo fixed.
+-05-22  Bernhard Herzog  <[email protected]>
+         Give the tables titles so that the GUI can display more meaningful
+         names. For now the titles are fixed but depend on e.g. filenames
+         or the titles of the joined tables.
+         * Thuban/Model/transientdb.py (TransientTable.Title)
+         (TransientJoinedTable.Title, AutoTransientTable.Title): New.
+         * Thuban/Model/table.py (DBFTable.Title, MemoryTable.Title): New.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_title): New. Test
+         for the Title method
+         (TestTransientTable.test_transient_joined_table)
+         (TestTransientTable.test_transient_table): Add test for the Title
+         methods
+         * test/test_memory_table.py (TestMemoryTable.test_title): New.
+         Test for the Title method
+         * test/test_dbf_table.py (TestDBFTable.test_title): New. Test for
+         the Title method
+-05-22  Bernhard Herzog  <[email protected]>
+         * test/test_layer.py (TestLayer.setUp, TestLayer.tearDown):
+         Provide a better way to destroy the layers
+         (TestLayer.test_base_layer, TestLayer.test_arc_layer)
+         (TestLayer.test_point_layer, TestLayer.test_empty_layer)
+         (TestLayer.test_polygon_layer, TestLayer.test_get_field_type): Use
+         the new way to destroy the layers.
+         (TestLayer.test_derived_store): New. Test for using a layer with a
+         DerivedShapeStore
+         * Thuban/Model/layer.py (Layer.SetShapeStore): Only set the
+         filename if the shape store actually has one.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/table.py (DBFTable.FileName): New. Accessor method
+         for the filename
+         * test/test_dbf_table.py (TestDBFTable.test_filename): New. Test
+         for the FileName method
+         (TestDBFTableWriting.test_write): Fix spelling of filename
+-05-22  Thomas Koester  <[email protected]>
+         * Thuban/Model/range.py, test/test_range.py: Brought over new Range
+         from SciParam that now really is immutable.
+-05-22  Frank Koormann  <[email protected]>
+         Layer Top/Bottom placement added to legend.
+         * Thuban/UI/legend.py
+         (LegendPanel._OnMoveTop(), LayerPanel._OnMoveBottom): New, methods
+         bound to tool events.
+         (LegendTree.MoveCurrentItemTop(), LegendTree.MoveCurrentItemBottom):
+         New, methods binding the event methods with the map methods.
+         * Thuban/Model/map.py (Map.TopLayer(), Map.BottomLayer()): New, place
+         layer at top/bottom of layer stack.
+         * Resources/Bitmaps/top_layer.xpm: New button icon.
+         * Resources/Bitmaps/bottom_layer.xpm: New button icon.
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.RemoveTable): New method to
+         remove tables
+         * test/test_session.py (TestSessionSimple.test_remove_table): New.
+         Test for RemoveTable
+-05-22  Thomas Koester  <[email protected]>
+         * Thuban/Model/classgen.py: Added short module doc string and CVS id.
+         (ClassGenerator.GenUniformDistribution): Use new Range __init__, too.
+-05-22  Bernhard Herzog  <[email protected]>
+         Implement a way to discover dependencies between tables and
+         shapestores.
+         * Thuban/Model/transientdb.py (TransientTableBase.Dependencies)
+         (TransientJoinedTable.Dependencies)
+         (AutoTransientTable.SimpleQuery): New. Implement the dependencies
+         interface
+         (TransientJoinedTable.__init__): Keep tack of the original table
+         objects in addition to the corresponding transient tables.
+         * Thuban/Model/table.py (DBFTable.Dependencies)
+         (MemoryTable.Dependencies): New. Implement the dependencies
+         interface
+         * Thuban/Model/data.py (ShapeTable): New. Helper class for
+         ShapefileStore
+         (ShapefileStore.__init__): Use ShapeTable instead of
+         AutoTransientTable
+         (ShapefileStore.Table, ShapefileStore.Shapefile): Add doc-strings
+         (ShapefileStore.FileName, ShapefileStore.FileType): New. Accessor
+         methods for filename and type
+         (ShapefileStore.Dependencies): New. Implement the dependencies
+         interface
+         (DerivedShapeStore): New class to replace SimpleStore. The main
+         difference to SimpleStore is that it depends not on a shapefile
+         but another shapestore which expresses the dependencies a bit
+         better
+         (SimpleStore.__init__): Add deprecation warning.
+         * test/test_dbf_table.py (TestDBFTable.test_dependencies): New.
+         Test for the Dependencies method.
+         * test/test_memory_table.py (TestMemoryTable.test_dependencies):
+         New. Test for the Dependencies method.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_dependencies): New.
+         Test for the Dependencies method.
+         (TestTransientTable.test_transient_joined_table): Add test for the
+         Dependencies method.
+         * test/test_session.py (TestSessionSimple.setUp)
+         (TestSessionSimple.tearDown): New. Implement a better way to
+         destroy the sessions.
+         (TestSessionSimple.test_initial_state)
+         (TestSessionSimple.test_add_table): Bind session to self.session
+         so that it's destroyed by tearDown
+         (TestSessionSimple.test_open_shapefile): New. Test for
+         OpenShapefile and the object it returns
+-05-22  Bernhard Herzog  <[email protected]>
+         * Thuban/Model/session.py (Session.AddTable): New method to
+         register tables with the session.
+         (Session.Tables): Return the tables registered with AddTable too.
+         * test/test_session.py (TestSessionSimple.test_add_table): New.
+         Test case for the AddTable method
+-05-22  Frank Koormann  <[email protected]>
+         UI polishing updates: Place main buttons (OK, Cancel, etc) in the
+         lower right corner, center labels for selections, initialize controls
+         in reasonable order for keyboard navigation.
+         * Thuban/UI/projdialog.py (ProjFrame.__init__, ProjFrame.__doLayout)
+         (ProjFrame.__DoOnProjAvail): Determine position of current projection
+         using the wxListBox.FindString() method. Still a problem (#1886)
+         * Thuban/UI/classifier.py
+         (Classifier.__init__, SelectPropertiesDialog.__init__)
+         * Thuban/UI/classgen.py (ClassGenDialog.__init__,
+         (ClassGenDialog.__DoOnGenTypeSelect): Moved initialization of the
+         different classification types from here to __init__.
+         (GenUniquePanel.__init__): Set the column width of the first field
+         in the Field ListCtrl to the full width.
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Rename 'Save As'
+         Button to 'Export'. Center Buttons in Selection Box, set Focus to
+         Grid.
+         (LayerTableFrame.OnKeyDown()): New, bound to the grid with EVT_KEY_DOWN,
+         changes focus to the Selection when pressing "Alt-S".
+         * Thuban/UI/legend.py (LegendTree.__SetVisibilityStyle): Only gray out
+         the text if not visible. The italic font sometimes exceeds the
+         rendering area.
+-05-21  Jonathan Coles   <[email protected]>
+         * Thuban/UI/dock.py (DockFrame): Rename references to _OnClose
+         to OnClose so that Thuban closes correctly.
+         * Thuban/UI/mainwindow.py (MainWindow.OnClose): Call
+         DockFrame.OnClose, not DockFrame._OnClose.
+-05-21  Jonathan Coles   <[email protected]>
+         * Thuban/Model/classgen.py (ClassGenerator.GenQuantiles): Remove
+         references to 'inf' and use new Range __init__ to pass floats
+         directly rather than converting them to strings first.
+         Fixes RTBug #1876.
+         * Thuban/Model/classification.py (ClassGroupRange.SetRange):
+         Use new Range ___init__ to pass floats.
+         * Thuban/Model/layer.py (RasterLayer.__init__): Test if the
+         filename is a valid image file. Throw IOError otherwise.
+         * Thuban/Model/range.py: Brought over new Range from SciParam that
+         is immutable and has an __init__ which can accept floats.
+         * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Move OpenShapefile
+         into try block. AddLayer doesn't throw any exceptions anymore.
+         (MainWindow.AddRasterLayer): Move constructor of RasterLayer into
+         try block.
+         * Thuban/UI/projdialog.py (GeoPanel.__init__): Put Degrees as
+         the first item in choices. Fixes RTBug #1882.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Check if scale
+         has gone to 0 which is a serious problem. abort.
+         (MapRenderer.draw_raster_layer): Catch IOError seperately and
+         print the error from GDAL.
+         * Thuban/UI/tableview.py (TableGrid.__init__): Call
+         ToggleEventListeners to turn on listening.
+         (TableGrid.ToggleEventListeners): New. Turns event listening on
+         and off so as to prevent excessive messages.
+         (LayerTableFrame.OnQuery): Use TableGrid.ToggleEventListeners
+         to suppress excessive messages when selecting many rows.
+         Fixes RTBug #1880.
+         * Thuban/UI/view.py: Added checks against if scale == 0. This
+         is a serious problem that can occur when an image without
+         geo data is loading and causes the map projection bounds to
+         go to infinity. Right now, the solution is to simply try
+         to recover.
+         * extensions/thuban/cpl_mfile.cpp (MFILEClose): Make sure
+         to set the MFILEReceiver attributes even if the data is NULL.
+         * extensions/thuban/gdalwarp.cpp: Improved the error handling
+         and passed GDAL messages back up to the Python layer. Also
+         tried to fix some memory leaks that were present in the original
+         utility but didn't matter because the program aborted.
+         * test/test_range.py: Copied over tests from SciParam. Removed
+         tests against importing. Fixes RTBug #1867.
+-05-21  Bernhard Herzog  <[email protected]>
+         * test/test_load.py: Remove unused imports and restructure the
+         test code
+         (LoadSessionTest): Split into one class for each test and turn
+         LoadSessionTest itself into the base class for all such session
+         tests.
+         (ClassificationTest): New base class for load tests that test
+         classifications
+         (TestSingleLayer, TestLayerVisibility, TestClassification)
+         (TestLabels, TestLayerProjection, TestRasterLayer): New classes
+         for the individual tests
+         * test/support.py (FileLoadTestCase.filename): New base class for
+         file loading tests
+-05-21  Jan-Oliver Wagner <[email protected]>
+         * Resources/Projections/defaults.proj: Renamed 'Universal Transverse
+         Mercator' to 'UTM Zone 32' as a more convenient example.
+         Added 'Gauss Krueger Zone 6'.
+         * Data/iceland_sample_raster.thuban: political polygon now
+         filled transparent to have the raster image visible at once.
+-05-21  Frank Koormann  <[email protected]>
+         * Thuban/UI/mainwindow.py (MainWindow): Renamed _OnClose() back to
+         OnClose() to keep in sync with extensions. Internally Thuban
+         still uses "underscored" names.
+-05-20  Jonathan Coles   <[email protected]>
+         This puts back Raster layer support. These layers support projections
+         through the GDAL library. Currently, the CVS version is being used.
+         There are no Debian packages available although this may change soon.
+         A GDAL driver was extended to support writing to memory rather to
+         files.
+         There is still some work that needs to be done, such as some error
+         handling when loading invalid images or when there is a problem
+         projecting the image. This putback simply checks in the majority
+         of the work.
+         * setup.py: Add gdalwarp library extension.
+         * Thuban/Model/layer.py (BaseLayer.HasClassification): New.
+         Defaults to False, but can be overridden by subclasses if they
+         support classification.
+         (RasterLayer): New. Defines a new layer that represents an
+         image.
+         * Thuban/Model/load.py (SessionLoader.__init__): Add rasterlayer
+         tag handler.
+         (SessionLoader.start_layer): Encode the filename.
+         (SessionLoader.start_rasterlayer, SessionLoader.end_rasterlayer):
+         New. Supports reading a rasterlayer tag.
+         * Thuban/Model/map.py (Map.BoundingBox): Fix typo in comment.
+         * Thuban/Model/save.py (XMLWriter.encode): Don't assume that we
+         get a string in Latin1. If we get such as string convert it to
+         unicode first, otherwise leave if alone before encoding.
+         (SessionSaver.write_layer): Add support for writing both Layers
+         and RasterLayers.
+         * Thuban/Model/transientdb.py (AutoTransientTable.SimpleQuery):
+         The right argument may not be a string, it could also be a Column.
+         * Thuban/UI/application.py (ThubanApplication.CreateMainWindow):
+         Make initial window size 600x400. Fixes RTBug #1872.
+         * Thuban/UI/classifier.py (Classifier.__init__): Rearrange how
+         the dialog is constructed so that we can support layers that
+         do not have classifications.
+         (Classifier._OnTry): Only build a classification if the layer
+         supports one.
+         * Thuban/UI/legend.py: Change all checks that a layer is an
+         instance of Layer into checks against BaseLayer.
+         (LegendTree.__FillTreeLayer): Only add children to a branch if
+         the layer supports classification.
+         * Thuban/UI/mainwindow.py (MainWindow.NewSession,
+         MainWindow.OpenSession): Don't proceed with an action if the
+         user chooses Cancel when they are asked to save changes.
+         (MainWindow.AddRasterLayer): New. Open a dialog to allow the
+         user to select an image file. Create a new RasterLayer and add
+         it to the map.
+         * Thuban/UI/renderer.py (MapRenderer.render_map): Add support
+         for rendering RasterLayer layers.
+         (MapRenderer.draw_raster_layer): Actually method that calls
+         the GDALWarp python wrapper and constructs an image from the
+         data returned.
+         * Thuban/UI/tableview.py (LayerTableFrame.__init__): Change the
+         Choices symbols to match those used in the table query method.
+         Replace deprecated method calls on table with new method names.
+         * Thuban/UI/view.py (MapCanvas.set_view_transform): Try to limit
+         how small the scale can get. This still needs more testing.
+         * extensions/thuban/bmpdataset.cpp: New, but copied from GDAL.
+         Provides a driver to output in .bmp format.
+         * extensions/thuban/cpl_mfile.cpp, extensions/thuban/cpl_mfile.h:
+         New. Provides IO routines which write to memory, rather than a file.
+         * extensions/thuban/gdalwarp.cpp: New, but basically a direct copy
+         of the gdalwarp utility provided in GDAL. Added function calls
+         that can be accessed from python.
+         * Data/iceland_sample_raster.thuban: New. Sample file that uses
+         a raster layer.
+         * Data/iceland/island.tfw, Data/iceland/island.tif: New. Raster
+         layer image data.
+         * Doc/thuban.dtd: Added rasterlayer attribute definition.
+         * test/test_layer.py, test/test_load.py, test/test_save.py: Added
+         tests associated with the raster layer code.
+         * test/test_transientdb.py
+         (TestTransientTable.test_auto_transient_table_query): Added a test
+         for using a Column object as the "right" parameter to a query.
+-05-19  Frank Koormann  <[email protected]>
+         * Thuban/version.py (get_changelog_date):
+         Catch exceptions if ChangeLog does not exist.
+         * Thuban/UI/view.py (MapCanvas.Export): Bugfix
 -05-19  Frank Koormann  <[email protected]>
          Extended version information for Thuban

 Legend:



Removed from v.924
 


changed lines


 
Added in v.2558
 Legend:



Removed from v.924
 


changed lines


 
Added in v.2558
-Removed from v.924
+Added in v.2558

[email protected]	ViewVC Help
Powered by ViewVC 1.1.26