| 1 |
2002-07-09 Bernhard Herzog <[email protected]> |
| 2 |
|
| 3 |
* setup.py: Create a file in python's site-packages directory to |
| 4 |
make installation of Thuban as a library easier. |
| 5 |
(ThubanInstall.user_options): Add two new options, |
| 6 |
create-init-module and init-module-dir |
| 7 |
(ThubanInstall.expand_with_pure_python_dirs): New method to expand |
| 8 |
filenames for installation in the default directories. |
| 9 |
(ThubanInstall.select_scheme, ThubanInstall.convert_paths): Extend |
| 10 |
the inherited methods to capture some filenames before they're |
| 11 |
transformed too much by distutils. |
| 12 |
(ThubanInstall.run): Create the init module if requested. |
| 13 |
(ThubanInstall.thuban_init_filename): New method to return the |
| 14 |
full name of the init module. |
| 15 |
(ThubanInstall.get_outputs): Append the filename of the init |
| 16 |
module. |
| 17 |
|
| 18 |
2002-07-08 Bernhard Herzog <[email protected]> |
| 19 |
|
| 20 |
* setup.py (thuban_bdist_rpm): Extend this version of bdist_rpm to |
| 21 |
handle the prefix properly which means that the default for the |
| 22 |
installation prefix should be /usr for RPMs and /usr/local when |
| 23 |
doing a normal source install. |
| 24 |
(bdist_rpm_install_script): Script to override the default install |
| 25 |
commands in the specfile generated by the bdist_rpm command. |
| 26 |
(thuban_bdist_rpm.user_options): Add a prefix option |
| 27 |
(thuban_bdist_rpm.initialize_options): Init the prefix option. |
| 28 |
Create the script files for the spec files as empty files here |
| 29 |
(thuban_bdist_rpm._make_spec_file): Override the inherited method |
| 30 |
to fill the script files with content. |
| 31 |
|
| 32 |
* Thuban/Model/save.py (relative_filename): Wrapper around |
| 33 |
Thuban.Lib.fileutil.relative_filename that accepts an empty dir |
| 34 |
argument. save_session now automatically uses this version, |
| 35 |
solving a problem when saving to a relative filename. |
| 36 |
|
| 37 |
* setup.py: In the setup call, make sure that the library |
| 38 |
directories are under $prefix/lib not directly under $prefix. |
| 39 |
|
| 40 |
2002-06-20 Jan-Oliver Wagner <[email protected]> |
| 41 |
|
| 42 |
* Thuban/Model/extension.py: new module to handle extension objects. |
| 43 |
* Thuban/Model/messages.py: new messages for extensions. |
| 44 |
* Thuban/Model/session.py (Session.Extensions, Session.HasExtensions, |
| 45 |
Session.AddExtension): new for handling extensions. |
| 46 |
Also some other minor changes to round up extension handling. |
| 47 |
* Thuban/UI/tree.py (SessionTreeCrtl:update_tree): Added visualization |
| 48 |
of Extension titles and title and names of its objects. |
| 49 |
|
| 50 |
2002-05-29 Bernhard Herzog <[email protected]> |
| 51 |
|
| 52 |
* Thuban/UI/mainwindow.py (MainWindow.bind_command_events): Bind |
| 53 |
the events for a command. |
| 54 |
(MainWindow.add_toolbar_command, MainWindow.add_menu_command): |
| 55 |
Call bind_command_events to bind the events. add_toolbar_command |
| 56 |
can now bind events too so that it's possible to have commands |
| 57 |
that are only available through the toolbar. |
| 58 |
(MainWindow.init_ids): New instance variable events_bound to keep |
| 59 |
track of for which commands events have been bound. |
| 60 |
|
| 61 |
2002-05-28 Bernhard Herzog <[email protected]> |
| 62 |
|
| 63 |
* Thuban/UI/menu.py: New module to build and manage menus. |
| 64 |
|
| 65 |
* Thuban/UI/mainwindow.py: Remove some unused imports. |
| 66 |
(MainWindow.__init__, main_menu): move the definition of the main |
| 67 |
menu from __init__ to the Menu instance main_menu. |
| 68 |
(MainWindow.build_menu_bar, MainWindow.build_menu): New methods to |
| 69 |
build the menu bar and sub-menus from a menu description. |
| 70 |
|
| 71 |
* Thuban/UI/application.py (ThubanApplication.OnInit): Read the |
| 72 |
startup file |
| 73 |
(ThubanApplication.read_startup_files): New method to run |
| 74 |
~/.thuban/thubanstart.py |
| 75 |
|
| 76 |
* Thuban/UI/mainwindow.py (MainWindow.__init__, main_toolbar): |
| 77 |
Move the toolbar definition to the Menu instance main_toolbar. |
| 78 |
(MainWindow.build_toolbar): New method to build the toolbar |
| 79 |
similar to the build_menu methods |
| 80 |
|
| 81 |
2002-05-23 Bernhard Herzog <[email protected]> |
| 82 |
|
| 83 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): Fix spelling of |
| 84 |
layer_outline_color. Fix it in the definition of the command too. |
| 85 |
|
| 86 |
* Thuban/UI/command.py (Command): Fix typo in doc string |
| 87 |
|
| 88 |
2002-05-22 Bernhard Herzog <[email protected]> |
| 89 |
|
| 90 |
* Thuban/UI/mainwindow.py (MainWindow.RunMessageBox): Fix a typo |
| 91 |
in the docstring |
| 92 |
|
| 93 |
2002-05-15 Bernhard Herzog <[email protected]> |
| 94 |
|
| 95 |
* Thuban/Model/layer.py (Layer.open_shapefile): Set bbox to None |
| 96 |
when the shapefile is empty. |
| 97 |
(Layer.BoundingBox, Layer.LatLongBoundingBox): Both methods may |
| 98 |
now return None for empty shapefiles. Update doc-strings. |
| 99 |
|
| 100 |
* Thuban/Model/map.py (Map.BoundingBox): Add doc-string. Deal with |
| 101 |
the layer's bbox being None. |
| 102 |
|
| 103 |
* Thuban/UI/tree.py (SessionTreeCtrl.update_tree): Deal with the |
| 104 |
layer's bbox being None. |
| 105 |
|
| 106 |
* Thuban/UI/view.py (MapCanvas.shape_selected): Only redraw when |
| 107 |
necessary. |
| 108 |
(MapCanvas.__init__): New instance variables, last_selected_layer |
| 109 |
and last_selected_shape to determine how the selection has |
| 110 |
changed. |
| 111 |
|
| 112 |
* Thuban/UI/tableview.py (TableGrid.__init__): Do not call |
| 113 |
AutoSizeColumns because it will cause a traversal of the entire |
| 114 |
table which for large .dbf files will take a very long time. |
| 115 |
|
| 116 |
2002-05-14 Bernhard Herzog <[email protected]> |
| 117 |
|
| 118 |
* Thuban/Model/layer.py (Layer.open_shapefile): Choose a better |
| 119 |
maximum depth for the tree than shapelib does by default. |
| 120 |
|
| 121 |
2002-05-10 Bernhard Herzog <[email protected]> |
| 122 |
|
| 123 |
* setup.py (py_modules): The shptree modules doesn't have a |
| 124 |
wrapper, so don't include it in the py_modules |
| 125 |
|
| 126 |
2002-05-08 Bernhard Herzog <[email protected]> |
| 127 |
|
| 128 |
* extensions/shapelib/shptree.c (compare_ints): Make arguments |
| 129 |
const void * as in the qsort prototype |
| 130 |
(SHPTreeFindLikelyShapes): Remove some unused variables. |
| 131 |
|
| 132 |
* Thuban/UI/view.py (PanTool.MouseMove): Use the bitmap the view |
| 133 |
maintains to redraw the window during a drag. |
| 134 |
(MapCanvas.unprojected_rect_around_point): New method to determine |
| 135 |
a small region around a point for hit-testing. |
| 136 |
(MapCanvas.find_shape_at): Only test the shapes in a small region |
| 137 |
around the point. |
| 138 |
|
| 139 |
* setup.py: Increment the version to 0.1.2 |
| 140 |
|
| 141 |
* Thuban/UI/tree.py (SessionTreeCtrl.unsubscribe_all): Remove a |
| 142 |
debug print and set session to None after unsubscribing |
| 143 |
|
| 144 |
2002-05-07 Bernhard Herzog <[email protected]> |
| 145 |
|
| 146 |
* Data/iceland_sample.session, Data/iceland_sample.thuban: Rename |
| 147 |
the file to have a .thuban extension. |
| 148 |
|
| 149 |
* Thuban/UI/tree.py (session_channels): New class constant with |
| 150 |
all the session channels to subscribe to to update the tree |
| 151 |
(SessionTreeCtrl.session_changed): Remember the session so that we |
| 152 |
can unsubscribe properly. Use the new class constant to |
| 153 |
unsubscribe from the old session and subscribe to the new one. |
| 154 |
(SessionTreeCtrl.unsubscribe_all): New method to unsubscribe all |
| 155 |
subscriptions of the SessionTreeCtrl. |
| 156 |
(SessionTreeView.OnClose): Call the tree's unsubscribe_all method. |
| 157 |
|
| 158 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): Add the "Show |
| 159 |
Session Tree" command to the file menu. |
| 160 |
|
| 161 |
* Thuban/UI/view.py (MapCanvas.do_redraw): Pass the entire bitmap |
| 162 |
as update_region to the renderer. |
| 163 |
|
| 164 |
* Thuban/UI/renderer.py |
| 165 |
(ScreenRenderer.layer_ids, ScreenRenderer.draw_shape_layer): The |
| 166 |
update box is now directly a tuple, not a wxRect anymore. |
| 167 |
|
| 168 |
* Thuban/Model/layer.py (Layer.ShapesInRegion): Remove some debug |
| 169 |
prints. |
| 170 |
|
| 171 |
2002-05-07 Bernhard Herzog <[email protected]> |
| 172 |
|
| 173 |
* setup.py: Add the shptree extension module. See |
| 174 |
extensions/pyshapelib/ChangeLog for more details. |
| 175 |
|
| 176 |
* extensions/shapelib/shpopen.c, extensions/shapelib/shapefil.h, |
| 177 |
extensions/shapelib/dbfopen.c: Really update to the versions of |
| 178 |
shapelib 1.2.9. For some reason it wasn't really done on |
| 179 |
2002-04-11. |
| 180 |
|
| 181 |
* extensions/shapelib/shptree.c: Modified version of shptree.c of |
| 182 |
shapelib 1.2.9. The only real difference is the use of qsort |
| 183 |
instead of a bubble sort implementation |
| 184 |
|
| 185 |
* Thuban/Model/layer.py (Layer.__init__): New instance variable |
| 186 |
shapetree to hold the shapelib quadtree for the shapefile |
| 187 |
(Layer.open_shapefile): Create the quad tree. |
| 188 |
(Layer.ShapesInRegion): New method to return the ids of shapes in |
| 189 |
a given region using the quad tree. |
| 190 |
|
| 191 |
* extensions/thuban/wxproj.cpp (project_points): Fix some typos in |
| 192 |
comment |
| 193 |
(draw_polygon_shape): Accept both arcs and polygons. |
| 194 |
(initwxproj): Use the new PYSHAPELIB_IMPORT_API macro to import |
| 195 |
the api. |
| 196 |
|
| 197 |
* Thuban/UI/renderer.py (MapRenderer.layer_ids): New method to |
| 198 |
return the shape ids to be rendered in a given layer. |
| 199 |
(MapRenderer.draw_shape_layer): Call layer_ids to get the list of |
| 200 |
ids. Use draw_polygon_shape to draw arc shapes as well. |
| 201 |
(ScreenRenderer.RenderMap): New parameter for the rectangle that |
| 202 |
has to be updated |
| 203 |
(ScreenRenderer.layer_ids): Make use of the layer's quadtree by |
| 204 |
calling it's ShapesInRegion method. |
| 205 |
|
| 206 |
* Thuban/UI/view.py (MapCanvas.__init__): New instance variable |
| 207 |
update_region for the update region. |
| 208 |
(MapCanvas.OnPaint): Maintain the update region |
| 209 |
(MapCanvas.do_redraw): Pass the bounding box of the update_region |
| 210 |
to the renderer when drawing the bitmap. Reset the update_region. |
| 211 |
|
| 212 |
2002-05-03 Bernhard Herzog <[email protected]> |
| 213 |
|
| 214 |
* Thuban/UI/mainwindow.py (MainWindow.SaveSessionAs, |
| 215 |
MainWindow.OpenSession): Change the file extension of the session |
| 216 |
files to .thuban |
| 217 |
|
| 218 |
* Thuban/Model/session.py (Session.AddMap, forwarded_channels): |
| 219 |
Move the map channels to be forwarded by the session into the |
| 220 |
class constant with forwarded_channels. Also add |
| 221 |
LAYER_PROJECTION_CHANGED and LAYER_VISIBILITY_CHANGED to |
| 222 |
forwarded_channels |
| 223 |
|
| 224 |
* Thuban/Model/base.py (Modifiable.changed): Fix doc-string (a |
| 225 |
typo and some rewording). |
| 226 |
|
| 227 |
2002-05-02 Bernhard Herzog <[email protected]> |
| 228 |
|
| 229 |
* Thuban/UI/view.py: Keep the temporary bitmap used during drawing |
| 230 |
around to speed up most redraws: |
| 231 |
(MapCanvas.__init__): New instance variable bitmap which holds the |
| 232 |
bitmap |
| 233 |
(MapCanvas.do_redraw): Redraw self.bitmap if necessary. Use |
| 234 |
self.bitmap to draw. |
| 235 |
(MapCanvas.full_redraw): New method to force a full redraw |
| 236 |
including the bitmap |
| 237 |
(MapCanvas.SetMap): Subscribe full_redraw instead of redraw to |
| 238 |
make sure the bitmap is redrawn. |
| 239 |
(MapCanvas.projection_changed, MapCanvas.set_view_transform, |
| 240 |
MapCanvas.shape_selected): Call full_redraw instead of readraw to |
| 241 |
make sure the bitmap is redrawn. |
| 242 |
(MapCanvas.OnSize): New method to handle size events so that the |
| 243 |
bitmap can be redrawn. |
| 244 |
|
| 245 |
2002-04-29 Bernhard Herzog <[email protected]> |
| 246 |
|
| 247 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): Subscribe to the |
| 248 |
canvas' VIEW_POSITION event |
| 249 |
(MainWindow.view_position_changed): Handler for VIEW_POSITION. |
| 250 |
Update the text in the status-bar accordingly. |
| 251 |
|
| 252 |
* Thuban/UI/view.py (MapCanvas): Derive from Publisher as well |
| 253 |
(MapCanvas.__del__): Implement because Publisher.__del__ has to be |
| 254 |
called. |
| 255 |
(MapCanvas.__init__): Bind EVT_LEAVE_WINDOW too. Initialize |
| 256 |
current_position |
| 257 |
(MapCanvas.set_current_position): New method to set |
| 258 |
current_position. Issue a VIEW_POSITION event |
| 259 |
(MapCanvas.CurrentPosition): New public method to return the value |
| 260 |
of current_position. Should be called when the VIEW_POSITION event |
| 261 |
is processed. |
| 262 |
(MapCanvas.OnLeftDown, MapCanvas.OnLeftUp, MapCanvas.OnMotion): |
| 263 |
Update the position. |
| 264 |
(MapCanvas.OnLeaveWindow): Set the position to None. |
| 265 |
|
| 266 |
* Thuban/UI/messages.py (VIEW_POSITION): New message for the |
| 267 |
position in the statusbar |
| 268 |
|
| 269 |
2002-04-26 Frank Koormann <[email protected]> |
| 270 |
|
| 271 |
* Thuban/UI/mainwindow.py: AddLayer, Dialog title s/session/data |
| 272 |
|
| 273 |
2002-04-24 Frank Koormann <[email protected]> |
| 274 |
|
| 275 |
* Resources/Bitmaps/identify.xpm: shadow added |
| 276 |
|
| 277 |
* Resources/Bitmaps/fullextent.xpm: new |
| 278 |
|
| 279 |
2002-04-22 Jan-Oliver Wagner <[email protected]> |
| 280 |
|
| 281 |
* Thuban/UI/tree.py (update_tree): added test for None on map bounding box |
| 282 |
|
| 283 |
2002-04-21 Jan-Oliver Wagner <[email protected]> |
| 284 |
|
| 285 |
* Thuban/UI/proj4dialog.py (UTMProposeZoneDialog): new |
| 286 |
|
| 287 |
* Thuban/UI/tree.py (update_tree): added added map extent |
| 288 |
|
| 289 |
* Thuban/UI/mainwindow.py (_method_command): extended by parameter |
| 290 |
icon; added map_full_extend as tool |
| 291 |
|
| 292 |
2002-04-19 Jan-Oliver Wagner <[email protected]> |
| 293 |
|
| 294 |
* Thuban/UI/mainwindow.py (SaveSession): launch save as dialog for |
| 295 |
saving _new_ sessions |
| 296 |
|
| 297 |
* Thuban/Model/session.py (create_empty_session): new session |
| 298 |
don't have a filename (set to None) |
| 299 |
|
| 300 |
* Thuban/UI/tree.py (update_tree): added filename and modified flag |
| 301 |
|
| 302 |
* Thuban/Model/load.py (ProcessSession): convert projection |
| 303 |
parameters from unicode to regular string |
| 304 |
|
| 305 |
* Data/iceland_sample.session: Added UTM Zone 26 projection. |
| 306 |
|
| 307 |
2002-04-11 Bernhard Herzog <[email protected]> |
| 308 |
|
| 309 |
* extensions/shapelib/shapefil.h, extensions/shapelib/shpopen.c, |
| 310 |
extensions/shapelib/dbfopen.c: Update to the versions of shapelib |
| 311 |
1.2.9 |
| 312 |
|
| 313 |
* setup.py (Lib.wxproj extension): Don't link shpopen.c and put |
| 314 |
the pyshapelib directoy into the list of include dirs, so that |
| 315 |
pyshapelib_api.h can be found. |
| 316 |
|
| 317 |
* extensions/thuban/wxproj.cpp (pyshapelib_api): New variable that |
| 318 |
holds the pyshapelib C-API |
| 319 |
(draw_polygon_shape, point_in_polygon_shape, shape_centroid): Use |
| 320 |
pyshapelib_api to access the shapelib functions. |
| 321 |
(initwxproj): Import the c_api from the shapelib module and |
| 322 |
initialize pyshapelib_api. |
| 323 |
|
| 324 |
2002-04-04 Bernhard Herzog <[email protected]> |
| 325 |
|
| 326 |
* setup.py (thuban_bdist_rpm.initialize_options): Use |
| 327 |
initialize_options to create the scripts for the rpm. |
| 328 |
|
| 329 |
* extensions/pyprojection/setup.py (PROJ4_PREFIX): Just use / |
| 330 |
|
| 331 |
2002-04-03 Bernhard Herzog <[email protected]> |
| 332 |
|
| 333 |
* setup.py: Increment version to 0.1.1 |
| 334 |
|
| 335 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): Move the "Add |
| 336 |
Layer" and "Remove Layer" commands from the layer menu to the map |
| 337 |
menu |
| 338 |
|
| 339 |
2002-02-15 Bernhard Herzog <[email protected]> |
| 340 |
|
| 341 |
* Thuban/Model/layer.py (Layer.Shape): list append only takes one |
| 342 |
argument (python <= 1.5.2 erroneously accepted multiuple |
| 343 |
arguments) |
| 344 |
|
| 345 |
2002-02-04 Bernhard Herzog <[email protected]> |
| 346 |
|
| 347 |
* Thuban/UI/identifyview.py (IdentifyGridCtrl): New class to use a |
| 348 |
RecordGrid in the identifyview. |
| 349 |
(IdentifyView.__init__): Use IdentifyGridCtrl instead of |
| 350 |
IdentifyListCtrl. The grid allows editing of the values. |
| 351 |
|
| 352 |
* Thuban/UI/controls.py (RecordTable, RecordGridCtrl): New classes |
| 353 |
implementing a grid for a single row of a thuban table. |
| 354 |
|
| 355 |
* Thuban/UI/view.py (MapCanvas.SelectShapeAt): Search through all |
| 356 |
layers by default. Easier to use than the previous default of only |
| 357 |
searching through the select layer which meant that if no layer |
| 358 |
was selected, you couldn't select a shape. |
| 359 |
|
| 360 |
* Thuban/UI/tableview.py (TableGrid.__init__): Fix typo |
| 361 |
|
| 362 |
* Thuban/UI/renderer.py (MapRenderer.draw_shape_layer): Honour the |
| 363 |
stroke_width attribute |
| 364 |
|
| 365 |
* Thuban/Model/save.py (save_session): Write the new stroke_width |
| 366 |
attribute |
| 367 |
|
| 368 |
* Thuban/Model/load.py (ProcessSession.startElement): Read the |
| 369 |
stroke_width attribute |
| 370 |
|
| 371 |
* Thuban/Model/layer.py (Layer.__init__): New parameter and |
| 372 |
instance variable stroke_width |
| 373 |
(Layer.SetStrokeWidth): Set the stroke_width. |
| 374 |
|
| 375 |
2002-02-01 Bernhard Herzog <[email protected]> |
| 376 |
|
| 377 |
* extensions/thuban/wxproj.cpp (project_points): Fix two |
| 378 |
off-by-one errors in the last loop that joins the various parts |
| 379 |
together. |
| 380 |
|
| 381 |
2002-01-14 Bernhard Herzog <[email protected]> |
| 382 |
|
| 383 |
* setup.py (data_dist.make_distribution): Fix some typos |
| 384 |
|
| 385 |
2001-09-18 Bernhard Herzog <[email protected]> |
| 386 |
|
| 387 |
* README: Slight tweaking in preparation for the 0.1 release |
| 388 |
|
| 389 |
* setup.cfg: Add section for sdist to create both tgz and zip |
| 390 |
archives |
| 391 |
|
| 392 |
* setup.py: increase version number to 0.1 |
| 393 |
(data_dist): New command class for data distribution |
| 394 |
|
| 395 |
|
| 396 |
2001-09-14 Bernhard Herzog <[email protected]> |
| 397 |
|
| 398 |
* Thuban/UI/identifyview.py (IdentifyListCtrl.selected_shape): |
| 399 |
Handle the case of no layer (i.e. layer is None) properly. |
| 400 |
|
| 401 |
* Thuban/UI/proj4dialog.py (UTMDialog.__init__, Proj4Dialog.__init__): |
| 402 |
Set the initial selection of the combo boxes to reflect the |
| 403 |
projection we're starting with in a way that works on windows, |
| 404 |
too. |
| 405 |
|
| 406 |
* Thuban/Lib/connector.py (Connector.print_connections): Print the |
| 407 |
puiblisher's ids in hex to make it easier to compare them to the |
| 408 |
standard repr of python methods |
| 409 |
|
| 410 |
* Thuban/Model/map.py (Map.Destroy): Unsubscribe the label_layer |
| 411 |
messages |
| 412 |
|
| 413 |
2001-09-13 Bernhard Herzog <[email protected]> |
| 414 |
|
| 415 |
* Thuban/UI/tree.py (SessionTreeCtrl.OnSelChanged): Make sure to |
| 416 |
deselect the layer if no layer is selected |
| 417 |
|
| 418 |
* Thuban/UI/view.py (MapCanvas.OnPaint): Only delay drawing to |
| 419 |
idle time when there actually is something to draw. If there's |
| 420 |
nothing to draw simply clear the window |
| 421 |
(MapCanvas.do_redraw): Call dc.EndDrawing and add some comments. |
| 422 |
(MapCanvas.SetMap): force a redraw in all cases because |
| 423 |
FitMapToWindow doesn't always do it. |
| 424 |
(MapCanvas.ZoomFactor): Add an optional parameter, center, to |
| 425 |
specify the point to move into the center of the window |
| 426 |
(ZoomOutTool.MouseUp, ZoomInTool.MouseUp): If the mouse wasn't |
| 427 |
dragged, zoon in/out by a factor of 2 |
| 428 |
(MapCanvas.find_shape_at): Iterate backwards (i.e. with decreasing |
| 429 |
index, i.e. reversed drawing order) so that objects appearing to |
| 430 |
be in from of others are selected first. This is probably mostly |
| 431 |
relevant for point shapes where the symbols used may overlap |
| 432 |
|
| 433 |
* Thuban/Model/session.py (create_empty_session): Unset the |
| 434 |
modified bit before returning it |
| 435 |
|
| 436 |
* Thuban/UI/mainwindow.py (MainWindow.NewSession): Use |
| 437 |
create_empty_session session to create the new, empty session. |
| 438 |
|
| 439 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): Set the size of |
| 440 |
the tool bitmaps. |
| 441 |
(MainWindow.OnClose, MainWindow.save_modified_session): Separate |
| 442 |
the code that asks whether the session should be saved into the |
| 443 |
new method save_modified_session. |
| 444 |
(MainWindow.OpenSession, MainWindow.NewSession): Use the new |
| 445 |
method to save modified session here too. |
| 446 |
|
| 447 |
2001-09-11 Bernhard Herzog <[email protected]> |
| 448 |
|
| 449 |
* setup.py (InnoIconItem): fix typo |
| 450 |
|
| 451 |
(thuban_bdist_inno.run): |
| 452 |
(bdist_inno.run): Move the decision not to create symlinks on |
| 453 |
non-nt platforms to thuban_bdist_inno and do it unconditinally |
| 454 |
since we never want to create the symlinks here |
| 455 |
|
| 456 |
2001-09-10 Bernhard Herzog <[email protected]> |
| 457 |
|
| 458 |
* Thuban/UI/mainwindow.py (MainWindow.IdentifyTool): Popup the |
| 459 |
identify view immediately |
| 460 |
|
| 461 |
* Thuban/UI/controls.py: New file with two classes RecordListCtrl |
| 462 |
and SelectableRecordListCtrl that implement the code shared by the |
| 463 |
identify view and the label dialog |
| 464 |
|
| 465 |
* Thuban/UI/identifyview.py (IdentifyListCtrl): Derive from the |
| 466 |
new class RecordListCtrl |
| 467 |
|
| 468 |
* Thuban/UI/labeldialog.py (LabelDialog.OnOK): Check whether the |
| 469 |
return value of GetValue is None instead of using it as a boolean |
| 470 |
directly so that Zero numbers are handled properly. |
| 471 |
(LabelListCtrl): Derive from the new class |
| 472 |
SelectableRecordListCtrl |
| 473 |
|
| 474 |
* Thuban/UI/proj4dialog.py (Proj4Dialog.__init__): |
| 475 |
(Proj4Dialog.dialogLayout): Make the window resizable and set the |
| 476 |
size of the text control explicitly to make the sizers work on |
| 477 |
both Windows and X. |
| 478 |
|
| 479 |
2001-09-07 Bernhard Herzog <[email protected]> |
| 480 |
|
| 481 |
* Thuban/UI/view.py (MapCanvas.find_shape_at):Add a new parameter |
| 482 |
that can limit the search to the currently selected layer. |
| 483 |
(MapCanvas.SelectShapeAt): Make sure that the currently selected |
| 484 |
layer stays selected even when no shape is found |
| 485 |
(MapCanvas.FitRectToWindow): If the rect has zero with or zero |
| 486 |
height do nothing (avoids zero division errors) |
| 487 |
|
| 488 |
2001-09-06 Bernhard Herzog <[email protected]> |
| 489 |
|
| 490 |
* Thuban/UI/tree.py (SessionTreeCtrl, SessionTreeView.__init__): |
| 491 |
Correct the spelling of SessionTreeCtrl. dabbrev is too damn |
| 492 |
convenient :-) |
| 493 |
(SessionTreeCtrl.__init__, SessionTreeCtrl.update_tree): Introduce |
| 494 |
a new instvar layer_to_item to map layers to tree items |
| 495 |
(SessionTreeCtrl.layer_selected): Select the appropriate tree item |
| 496 |
to match the current selection in the interactor |
| 497 |
|
| 498 |
* Thuban/UI/interactor.py (Interactor.SelectedLayer): |
| 499 |
(Interactor.HasSelectedLayer): New methods to query the current |
| 500 |
selection |
| 501 |
|
| 502 |
* Thuban/UI/mainwindow.py (MainWindow.current_layer): |
| 503 |
(MainWindow.has_selected_layer): Simply call the appropriate |
| 504 |
interactor method |
| 505 |
|
| 506 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): |
| 507 |
(MainWindow.LayerShowTable): |
| 508 |
(MainWindow.identify_view_on_demand): Store the interactor in an |
| 509 |
instvar and use that reference instead of going through main.app |
| 510 |
|
| 511 |
* Thuban/UI/mainwindow.py (MainWindow.ShowSessionTree): |
| 512 |
* Thuban/UI/application.py (ThubanApplication.OnInit): |
| 513 |
* Thuban/UI/main.py (main): Create the session tree view in main |
| 514 |
with the new mainwindow method ShowSessionTree and not directly |
| 515 |
the application's OnInit method |
| 516 |
|
| 517 |
* Thuban/UI/tree.py (myTreeCtrlPanel): |
| 518 |
(SessioinTreeCtrl): Rename to SessioinTreeCtrl and turn it into a |
| 519 |
TreeCtrl isntead of a panel. This affects most method since we now |
| 520 |
refer to self instead of self.tree |
| 521 |
(SessionTreeView): New class implementing a non-modal dialog |
| 522 |
showing the session tree. |
| 523 |
|
| 524 |
* Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Pass the |
| 525 |
layer to the tableview dialog. |
| 526 |
|
| 527 |
* Thuban/UI/tableview.py: Add some doc-strings |
| 528 |
(TableGrid): |
| 529 |
(TableGrid.OnRangeSelect): |
| 530 |
(TableGrid.OnSelectCell): |
| 531 |
(TableFrame.__init__): |
| 532 |
(TableFrame.row_selected): |
| 533 |
Selecting rows in the grid view now updates the selected shapes |
| 534 |
through the TableFrame. To achieve this we derive TableGrid from |
| 535 |
Publisher and introduce the message type ROW_SELECTED which the |
| 536 |
TableFrame subscribes to and which is issued by OnRangeSelect and |
| 537 |
OnSelectCell |
| 538 |
|
| 539 |
(DataTable.SelectRow): Removed because it's no longer needed in |
| 540 |
the row/shape selection scheme |
| 541 |
|
| 542 |
* Thuban/UI/dialogs.py: New file implementing common classes for |
| 543 |
dialogs |
| 544 |
|
| 545 |
* Thuban/UI/tableview.py (TableGrid.__init__): Don't subscribe to |
| 546 |
the SELECTED_SHAPE message anymore. This is now handled by the |
| 547 |
parent. |
| 548 |
(TableGrid.select_shape): Only update the selection if the shape |
| 549 |
is not None. |
| 550 |
(TableFrame): Inherit from the new NonModalDialog class. |
| 551 |
(TableFrame.__init__, TableFrame.select_shape): Handle the |
| 552 |
SELECT_SHAPE message. |
| 553 |
(TableFrame.OnClose): Extend the inherited method to unsubscribe |
| 554 |
SELECT_SHAPE |
| 555 |
|
| 556 |
* Thuban/UI/mainwindow.py (MainWindow.init_dialogs): |
| 557 |
(MainWindow.add_dialog): |
| 558 |
(MainWindow.dialog_open): |
| 559 |
(MainWindow.remove_dialog): |
| 560 |
(MainWindow.get_open_dialog): New methods to maintain a dictionary |
| 561 |
of opened non-modal dialogs. |
| 562 |
|
| 563 |
(MainWindow.__init__): Initialize the new non-modal dictionary |
| 564 |
management code |
| 565 |
(MainWindow.LayerShowTable): maintain separate dialogs for each |
| 566 |
table using the non-modal dialog management code to only open a |
| 567 |
view once for each table. |
| 568 |
|
| 569 |
(MainWindow.IdentifyTool): |
| 570 |
(MainWindow.__init__): |
| 571 |
(MainWindow.identify_view_on_demand): Don't open the identify view |
| 572 |
in IdentifyTool anymore. This will be done automatically by the |
| 573 |
new method identify_view_on_demand which handles the |
| 574 |
SELECTED_SHAPE message so that the identify view will be opened on |
| 575 |
demand |
| 576 |
|
| 577 |
* Thuban/UI/identifyview.py (IdentifyListCtrl.__init__): Remove |
| 578 |
the interactor argument. The SELECTED_SHAPE message is now handled |
| 579 |
by the parent. |
| 580 |
(IdentifyView.__init__): Add the interactor argument so that we |
| 581 |
can handle the SELECTED_SHAPE message here |
| 582 |
(IdentifyView.selected_shape): New method to handle the |
| 583 |
SELECTED_SHAPE messages |
| 584 |
|
| 585 |
* Thuban/UI/identifyview.py (IdentifyView): Derive from the new |
| 586 |
NonModalDialog class |
| 587 |
(IdentifyView.OnClose): Extend the inherited version to |
| 588 |
unsubscribe SELECT_SHAPE |
| 589 |
|
| 590 |
* Thuban/Model/session.py (Session.UnsetModified): Remove debug prints |
| 591 |
|
| 592 |
2001-09-05 Bernhard Herzog <[email protected]> |
| 593 |
|
| 594 |
* Thuban/UI/view.py (MapCanvas.__init__): New argument, interactor. |
| 595 |
|
| 596 |
* Thuban/UI/mainwindow.py (MainWindow.__init__): New argument |
| 597 |
interactor to pass through to the MapCanvas |
| 598 |
|
| 599 |
* Thuban/UI/application.py (ThubanApplication.OnInit): Use the new |
| 600 |
argument to the MainWindow constructor to get rid of the ugly hack |
| 601 |
that made main.app available early just so that the mapcanvas |
| 602 |
could access the interactor object. |
| 603 |
|
| 604 |
2001-09-04 Bernhard Herzog <[email protected]> |
| 605 |
|
| 606 |
* Thuban/UI/mainwindow.py (MainWindow.RunMessageBox): New method |
| 607 |
that runs a modal message box |
| 608 |
(MainWindow.OnClose): Use the new method |
| 609 |
(MainWindow.RemoveLayer): Just do nothing in case no layer is |
| 610 |
selected. The command should be grayed out anyway, so there's no |
| 611 |
need to pop up a message box. |
| 612 |
(MainWindow.AddLayer): Pop up a message box with an error message |
| 613 |
if the shape file can't be opened |
| 614 |
|
| 615 |
* Thuban/Model/layer.py (Layer.__init__): Open the shapefile |
| 616 |
immediately. This will cause an exception in case the file can't |
| 617 |
be opened and we can display an appropriate message. |
| 618 |
|
| 619 |
* MANIFEST.in: Add extensions/pyprojection/LICENSE |
| 620 |
|
| 621 |
* setup.py (thuban_bdist_rpm): New class implementing a Thuban |
| 622 |
specific bdist_rpm command. |
| 623 |
|
| 624 |
* Thuban/UI/main.py: Catch ImportError exceptions when importing |
| 625 |
the locale module because it may not be available on some |
| 626 |
installations. |
| 627 |
|
| 628 |
* extensions/pyprojection/LICENSE: Copy of the license text in |
| 629 |
Projection.i. Having it in a separate file makes it easier to |
| 630 |
refer to license text in e.g. RPMs |
| 631 |
|
| 632 |
2001-09-03 Bernhard Herzog <[email protected]> |
| 633 |
|
| 634 |
* setup.py: use wx-config instead of wxgtk-config because it's |
| 635 |
more generic |
| 636 |
|
| 637 |
* setup.py (ThubanInstall.get_outputs): Add the symlink in |
| 638 |
<prefix>/bin to the outputs |
| 639 |
(ThubanInstall.link_file): New method to link files. We need this |
| 640 |
because the standard copy_files refuses to link non-existing |
| 641 |
files. |
| 642 |
(ThubanInstall.run): Remove the leading install root from the |
| 643 |
script filename if an install root was specified and use the new |
| 644 |
link_file method |
| 645 |
|
| 646 |
* Thuban/UI/mainwindow.py (MainWindow.AddLayer): Fit the map to |
| 647 |
the window when the first layer is added to the map. |
| 648 |
|
| 649 |
* setup.py (ThubanInstall.run): Honor the build root (self.root) |
| 650 |
when linking thuban.py to <prefix>/bin |
| 651 |
|
| 652 |
2001-08-31 Bernhard Herzog <[email protected]> |
| 653 |
|
| 654 |
* setup.py: In the setup call, the install parameters shouldn't |
| 655 |
have trailing slashes because distutils on non-posix platforms |
| 656 |
doesn't like that. The same applies to other directories like |
| 657 |
"Resources/Bitmaps" |
| 658 |
|
| 659 |
In the configuration section for nt, move the wxWindows directory |
| 660 |
optins into the part clearly marked as editable. |
| 661 |
|
| 662 |
(InstallLocal.initialize_options): |
| 663 |
(InstallLocal.user_options): remove the currently unused debug |
| 664 |
flag |
| 665 |
(thuban_build_py.find_all_modules): Add this method so that it |
| 666 |
works for our case of having packages and modules in one |
| 667 |
distribution as well. |
| 668 |
(ThubanInstall.initialize_options): |
| 669 |
(ThubanInstall.finalize_options): |
| 670 |
(ThubanInstall.user_options): |
| 671 |
(ThubanInstall.boolean_options): Add new options, do-symlink and |
| 672 |
extra files. Since these are the first ThubanInstall specific |
| 673 |
options, override user_options and boolean_options |
| 674 |
(ThubanInstall.run): Honor the new do-symlink and extra-files |
| 675 |
options. |
| 676 |
(ThubanInstall.get_outputs): Add to override the base-class's |
| 677 |
version and add the extra-files to the outputs |
| 678 |
(bdist_inno): New class for windows distributions with Inno Setup |
| 679 |
(InnoIconItem): Helper class for bdist_inno |
| 680 |
(thuban_bdist_inno): Thuban specific version of bdist_inno. Added |
| 681 |
this together with the appropriate parameters, to the setup call. |
| 682 |
|
| 683 |
* setup.cfg (bdist_inno): added new section for the inno setup |
| 684 |
installer |
| 685 |
|
| 686 |
* Thuban/UI/tree.py (myTreeCtrlPanel.__init__): New inst var |
| 687 |
changing_selection to avoid recursive selection events when |
| 688 |
modifying the selection in response to a selection event. |
| 689 |
(myTreeCtrlPanel.normalize_selection): Set the new inst var when |
| 690 |
changing the tree's selection. |
| 691 |
(myTreeCtrlPanel.OnSelChanged): Only normalize the selection when |
| 692 |
we're not being called indirectly from normalize_selection. |
| 693 |
|
| 694 |
* Thuban/UI/mainwindow.py (MainWindow.update_command_ui): Call |
| 695 |
event.Check only if the command is actuall checkable. |
| 696 |
(MainWindow.__init__): Call the toolbar's Realize method to make |
| 697 |
sure that the items are actually shown |
| 698 |
|
| 699 |
2001-08-28 Bernhard Herzog <[email protected]> |
| 700 |
|
| 701 |
* setup.py: Fix some doc strings |
| 702 |
|
| 703 |
* ChangeLog: started |
| 704 |
|
Parent Directory
| 
Revision Log