/[thuban]/branches/WIP-pyshapelib-bramz/ChangeLog
ViewVC logotype

Diff of /branches/WIP-pyshapelib-bramz/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

revision 1657 by bh, Mon Aug 25 18:27:16 2003 UTC revision 2012 by bh, Wed Dec 3 09:46:48 2003 UTC
# Line 1  Line 1 
1    2003-12-03  Bernhard Herzog  <[email protected]>
2    
3            * Thuban/Lib/version.py: New. Module for version number
4            manipulations. The version of make_tuple here also deals better
5            with more unusual version number strings, such as e.g.
6            "1.2+cvs20031111"
7    
8            * Thuban/version.py (make_tuple): Removed. It's now in
9            Thuban.Lib.version. Use that implementation instead.
10    
11            * test/test_lib_version.py: New. Tests for Thuban/Lib/version.py
12    
13    2003-12-02  Bernhard Herzog  <[email protected]>
14    
15            * MANIFEST.in: Add debian files
16    
17            * setup.py (setup call): Add packages for the Extensions so that
18            they're installed too
19            (data_files): Add READMEs and sample data from some Extensions
20    
21            * NEWS: Add note about the extensions in binary packages
22    
23    2003-12-02  Bernhard Herzog  <[email protected]>
24    
25            * Thuban/Model/save.py (SessionSaver.write_session): Save files
26            with the thuban-1.0rc1
27    
28            * Thuban/Model/load.py (SessionLoader.__init__): Recognize the
29            thuban-1.0rc1 namespace too
30    
31            * test/test_save.py (SaveSessionTest.dtd)
32            (SaveSessionTest.testEmptySession)
33            (SaveSessionTest.testSingleLayer)
34            (SaveSessionTest.testLayerProjection)
35            (SaveSessionTest.testRasterLayer)
36            (SaveSessionTest.testClassifiedLayer)
37            (SaveSessionTest.test_dbf_table)
38            (SaveSessionTest.test_joined_table)
39            (SaveSessionTest.test_save_postgis): Update to thuban-1.0rc1
40            namespace
41    
42            * test/test_load.py (LoadSessionTest.dtd): Update to thuban-1.0rc1
43            namespace
44            (TestSingleLayer.file_contents)
45            (TestNonAsciiColumnName.file_contents)
46            (TestLayerVisibility.file_contents)
47            (TestClassification.file_contents, TestLabels.file_contents)
48            (TestLayerProjection.file_contents)
49            (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
50            (TestPostGISLayer.file_contents)
51            (TestPostGISLayerPassword.file_contents)
52            (TestLoadError.file_contents, TestLoadError.test): Update to
53            thuban-1.0rc1 namespace
54    
55    2003-12-01  Bernhard Herzog  <[email protected]>
56    
57            * setup.py (proj4_prefix, wx_prefix, gdal_prefix): Fix these for
58            nt to better match Intevation's current w32 setup
59    
60            * HOWTO-Release: Add note about updating MANIFEST.in
61    
62            * MANIFEST.in: Add the Extensions
63    
64            * NEWS: Update for 1.0rc1
65    
66    2003-12-01  Bernhard Herzog  <[email protected]>
67    
68            * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Change the wild
69            cards for the dialog so that shapefiles ending in all uppercase
70            SHP are listed too
71    
72    2003-11-28  Bernhard Herzog  <[email protected]>
73    
74            * Thuban/version.py (longversion): Update to 1.0rc1
75    
76            * setup.py (setup call): Update version to 1.0rc1. Use the
77            [email protected] email address as author email instead of my
78            personal one.
79    
80    2003-11-28  Bernhard Herzog  <[email protected]>
81    
82            * po/de.po: Update german translation.
83    
84    2003-11-28  Bernhard Herzog  <[email protected]>
85    
86            Unify the filenames stored in .thuban files so that the .thuban
87            files are more platform independend
88    
89            * Thuban/Model/save.py (unify_filename): New. Unify filenames so
90            that they can be used on both windows and unix
91            (SessionSaver.prepare_filename): New. Handle all filename
92            transformations for filenames stored in the thuban file
93            (SessionSaver.write_data_containers, SessionSaver.write_layer):
94            Use prepare_filename
95    
96            * test/test_save.py (SaveSessionTest.testSingleLayer)
97            (SaveSessionTest.testLayerProjection)
98            (SaveSessionTest.testRasterLayer)
99            (SaveSessionTest.testClassifiedLayer)
100            (SaveSessionTest.test_dbf_table)
101            (SaveSessionTest.test_joined_table): Filenames are always stored
102            with slashes on all currently supported platforms so adapt all
103            tests to this
104    
105            * test/test_load.py (LoadSessionTest.filenames): With the new
106            filename scheme the filenames in the tests should be
107            understandable on all currently supported platforms so we turn
108            this into an empty list because we don't have to normalize them
109            anymore
110    
111    2003-11-28  Bernhard Herzog  <[email protected]>
112    
113            * test/test_layer.py (TestLayer.test_arc_layer_with_projection):
114            Add the ellipsoid to the projection since some Proj versions
115            complain if it's missing.
116    
117    2003-11-27  Bernhard Herzog  <[email protected]>
118    
119            Corect some bounding box projection problems
120    
121            * Thuban/Model/proj.py (Projection.InverseBBox): New. Inverse
122            version of ForwardBBox
123            (Projection._transform_bbox): New. common implementation of
124            ForwardBBox and InverseBBox
125            (Projection.ForwardBBox): Use _transform_bbox.
126    
127            * test/test_proj.py (TestProjection.test): Add test for
128            InverseBBox
129    
130            * Thuban/Model/layer.py (Layer.LatLongBoundingBox)
131            (Layer.ShapesBoundingBox, RasterLayer.LatLongBoundingBox): Use the
132            new InverseBBox method to determine the unprojected bounding box
133            (Layer.ShapesInRegion): Use the ForwardBBox method to project the
134            bbox.
135    
136            * test/test_layer.py (TestLayer.test_point_layer_with_projection):
137            Removed.
138            (TestLayer.test_arc_layer_with_projection): New. This test is
139            better able to test whether bounding boxes are projected correctly
140            than test_point_layer_with_projection
141    
142            * Thuban/UI/viewport.py (ViewPort.map_projection_changed): Use
143            InverseBBox to unproject bboxes
144    
145    2003-11-25  Bernhard Herzog  <[email protected]>
146    
147            * Thuban/UI/about.py (About.__init__): Make sure we have ASCII
148            source code.
149    
150    2003-11-25  Bernhard Herzog  <[email protected]>
151    
152            * Thuban/Model/layer.py (Layer.__getattr__): Removed. It was only
153            there for backwards compatibility and all code relying on that
154            should have been updated by now.
155    
156    2003-11-25  Bernhard Herzog  <[email protected]>
157    
158            * test/test_load.py (TestClassification.test): Add the missing
159            round trip test.
160            (TestClassification.file_contents): Update to the newest file
161            format
162    
163    2003-11-25  Bernhard Herzog  <[email protected]>
164    
165            Add very experimental (and possibly dangerous) extension to draw
166            polygons:
167    
168            * Extensions/drawshape/README: New. Brief installation
169            instructions
170    
171            * Extensions/drawshape/drawshape.py: New. Implementation of the
172            drawshape extensions
173    
174            * Extensions/drawshape/patch.diff: Patch to apply before the
175            extension can be used.
176    
177    2003-11-24  Bernhard Herzog  <[email protected]>
178    
179            * Thuban/Model/data.py (ShapefileStore._open_shapefile)
180            (ShapefileStore.__init__): Factor opening the shapefile into a
181            separate method (the new _open_shapefile). This makes the code a
182            bit more readable but the real reason is that it makes some evil
183            hacks easier. :-)
184    
185    2003-11-24  Bernhard Herzog  <[email protected]>
186    
187            * Thuban/Model/load.py (SessionLoader.check_attrs): If no
188            converter is specified for an attribute assume it's a string
189            containing only Latin1 characters. Update doc-string accordingly.
190            This change should fix many places where unicode objects might
191            accidentally enter Thuban.
192    
193            * test/test_load.py (TestNonAsciiColumnName): New test to check
194            what happens with column names in DBF files that contain non-ascii
195            characters
196    
197    2003-11-21  Bernhard Herzog  <[email protected]>
198    
199            Enable the experimental attribute editing again and introduce a
200            command line switch to actually activate it
201    
202            * Thuban/UI/main.py (options): New. Container for options set on
203            the commmand line
204            (main): Add the --enable-attribute-editing flag.
205    
206            * Thuban/UI/identifyview.py (IdentifyView.__init__): If attribute
207            editing is enabled use the grid ctrl which allows editing of the
208            values
209    
210            * Thuban/Model/transientdb.py (AutoTransientTable.write_record):
211            New. Just delegate this to the underlying table.
212    
213    2003-11-20  Bernhard Herzog  <[email protected]>
214    
215            * test/test_proj.py (ProjFileReadTests.test_read_unreadable_file):
216            Skip this test if run under non-posix systems since it only works
217            there
218    
219    2003-11-19  Bernhard Herzog  <[email protected]>
220    
221            * Thuban/Model/resource.py: Rework the way gdal support is
222            determined so that we can give a reason in the about why gdal is
223            not supported.
224            (gdal_support_status): New. Variable holding a string with the
225            reason for no gdal support
226    
227            * Thuban/UI/about.py (About.__init__): Add the reason why gdal is
228            not supported to the message
229    
230    2003-11-19  Bernhard Herzog  <[email protected]>
231    
232            Remove the old table interface and its test cases
233    
234            * Thuban/Model/table.py (OldTableInterfaceMixin): Removed.
235            (DBFTable, MemoryTable): Do not derive from OldTableInterfaceMixin
236            anymore
237    
238            * Thuban/Model/transientdb.py (TransientTableBase)
239            (AutoTransientTable): Do not derive from OldTableInterfaceMixin
240            anymore
241    
242            * test/test_table.py: Removed since the old interface it tests is
243            gone.
244    
245            * test/runtests.py (main): The old table interface is gone and
246            with it the deprecation warnings so remove the code that turns
247            these warnings into errors
248    
249    2003-11-19  Bernhard Herzog  <[email protected]>
250    
251            * test/test_table.py: Revert to revision 1.5 again. Changing the
252            tests to use the new table interface is completely wrong since the
253            whole purpose of the tests in this module is to test the old
254            interface.
255    
256    2003-11-18  Bernhard Herzog  <[email protected]>
257    
258            * Thuban/Model/postgisdb.py (PostGISConnection.MatchesParameters):
259            New. Test whether the connection matches a set of connection
260            parameters
261    
262            * Thuban/UI/dbdialog.py (DBFrame.conns_changed): Fix doc-string
263            (DBFrame.OnAdd): Use the new MatchesParameters method when looking
264            for existing connections with the same parameters and break out of
265            the loop correctly.
266    
267            * test/test_postgis_db.py (TestBriefDescription)
268            (TestPostGISSimple.test_brief_description): Rename
269            TestBriefDescription to TestPostGISSimple and the test method to
270            test_brief_description so that we can add more test methods.
271            (TestPostGISSimple.test_matches_parameters): New. Test the new
272            MatchesParameters method
273    
274    2003-11-18  Bernhard Herzog  <[email protected]>
275    
276            * Thuban/Lib/connector.py (Publisher): Introduce a new flag,
277            _was_destroyed, to indicate whether an publisher instance has
278            already been destroyed.
279            (Publisher.Unsubscribe): Only disconnect if the publisher has not
280            been destroyed yet.
281            (Publisher.Destroy): Set the _was_destroyed flag to true.
282    
283            * test/test_connector.py
284            (TestPublisher.test_unsubscribe_after_destroy): New. Test that
285            calling Unsubscribe after Destroy doesn't raise an exception
286    
287    2003-11-14  Bernhard Herzog  <[email protected]>
288    
289            * Thuban/UI/identifyview.py (IdentifyView.selected_shape): Fix
290            typo in doc-string
291    
292    2003-11-13  Bernhard Herzog  <[email protected]>
293    
294            Quote table and column names properly for postgis.
295    
296            * Thuban/Model/postgisdb.py (quote_identifier): New. Function to
297            quote an identifier for use in an sql statement
298            (PostGISColumn.__init__): Add the quoted_name attribute
299            (PostGISTable.__init__): New instance variable quoted_tablename
300            (PostGISTable._fetch_table_information): Use the quoted table
301            name. New isntance variable quoted_geo_col with a quoted version
302            of geometry_column
303            (PostGISTable.NumRows, PostGISTable.RowIdToOrdinal)
304            (PostGISTable.RowOrdinalToId): Use the quoted table name
305            (PostGISTable.ReadValue, PostGISTable.ValueRange)
306            (PostGISTable.UniqueValues, PostGISTable.SimpleQuery)
307            (PostGISShapeStore.BoundingBox, PostGISShapeStore.Shape)
308            (PostGISShapeStore.AllShapes, PostGISShapeStore.ShapesInRegion):
309            Use quoted table and column names
310    
311            * test/test_postgis_db.py (TestPostGISSpecialCases)
312            (TestPostGISIgnoredColumns): Rename the class to
313            TestPostGISSpecialCases because that better describes the new
314            cases
315            (TestPostGISSpecialCases.test_unsupported_types)
316            (TestPostGISSpecialCases.test): Rename the method to
317            test_unsupported_types because we need a more descriptive name now
318            that there are more methods
319            (TestPostGISSpecialCases.test_table_name_quoting)
320            (TestPostGISSpecialCases.test_column_name_quoting)
321            (TestPostGISSpecialCases.test_shapestore_name_quoting): New test
322            cases to test quoting of table and column names in PostGISTable
323            and PostGISShapeStore
324    
325            * test/postgissupport.py
326            (skip_if_addgeometrycolumn_does_not_use_quote_ident): New. Skip if
327            AddGeometryColumn desn't support table or column names with sapces
328            or double quotes
329    
330    2003-11-12  Jan-Oliver Wagner <[email protected]>
331    
332            * Extensions/wms/__init__.py: New: Init to make this
333            directory a package.
334    
335            * Extensions/wms/wms.py: New: Provide layers via OGC WMS.
336    
337    2003-11-11  Bernhard Herzog  <[email protected]>
338    
339            * Thuban/Model/resource.py (EPSG_DEPRECATED_PROJ_FILE): New.
340            Constant for the file woth deprecated epsg projections
341            (get_system_proj_file): Update doc-string
342    
343            * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Add a space
344            above the EPS widgets, introduce a check box for the deprecated
345            eps projections and a label for the epsg widgets
346            (ProjFrame._OnShowEPSG): Handle the deprecated EPSG projections
347            too
348    
349    2003-11-11  Bernhard Herzog  <[email protected]>
350    
351            Avoid warnings when run under Python 2.3
352    
353            * Thuban/UI/baserenderer.py (BaseRenderer.draw_point_shape)
354            (BaseRenderer.draw_label_layer): Coordinates must be ints.
355    
356            * Thuban/UI/renderer.py (MapRenderer.make_point): Turn this into a
357            real method so that we can convert to int.
358            (MapRenderer.label_font): The font size mist be an int.
359    
360            * Thuban/UI/common.py (Color2wxColour): The color values must be
361            ints. Also, remove the unnecessary asserts.
362    
363            * test/test_load_0_8.py (TestUnicodeStrings.file_contents)
364            (TestUnicodeStrings.test): Python source code should not contain
365            non-ascii characters unless an encoding is specified in the file.
366            Therefore use \x escapes in the string literals for non-ascii
367            characters.
368    
369    2003-11-11  Bernhard Herzog  <[email protected]>
370    
371            * Thuban/Model/resource.py (get_system_proj_file): Add a filename
372            parameter so that this function can be used for all proj files in
373            Resource/Projections
374            (DEFAULT_PROJ_FILE, EPSG_PROJ_FILE): New. Predefined filenames for
375            get_system_proj_file
376    
377            * Thuban/UI/projdialog.py (ProjFrame.__init__): Instead of one
378            ProjFile self.__sysProjFile use a dictionary of system ProjFile
379            objects self._sys_proj_files
380            (ProjFrame.build_dialog): Adapt to the new changes in the
381            ProjectionList constructor. Add a check button to toggle whether
382            EPSG projections are shown
383            (ProjFrame._OnShowEPSG): New. Handler for the epsg check button
384            events.
385            (ProjFrame.load_user_proj, ProjFrame.load_system_proj): Only show
386            the busy cursor if the files have not yet been loaded by the
387            dialog.
388            (ProjFrame.load_system_proj): Add a parameter for the name of the
389            proj file. Maintain the dictionary of system projections
390            self._sys_proj_files
391    
392            * Thuban/UI/projlist.py (ProjectionList): Merge the system_projs,
393            user_projs parameters into one parameter proj_files which is a
394            list of proj files.
395            (ProjectionList._subscribe_proj_files)
396            (ProjectionList._unsubscribe_proj_files): New. Move
397            subscription/unsubscription of projfile messages to separate
398            methods
399            (ProjectionList.Destroy): The unsubscribe is now done in
400            _unsubscribe_proj_files
401            (ProjectionList.update_projections): We now have a list of proj
402            file objects
403            (ProjectionList.SetProjFiles): New method to set a new list of
404            proj file objects
405    
406            * test/test_proj.py (ProjFileReadTests.test_get_system_proj_file):
407            Specify explicitly which system proj file to load.
408    
409    2003-11-11  Bernhard Herzog  <[email protected]>
410    
411            * Thuban/Model/load.py (SessionLoader.Destroy): New. Clear all
412            instance variables to cut cyclic references. The GC would have
413            collected the loader eventually but it can happen that it doesn't
414            run at all until thuban is closed (2.3 but not 2.2 tries a bit
415            harder and forces a collection when the interpreter terminates)
416            (load_session): Call the handler's Destroy method to make sure
417            that it gets garbage collected early. Otherwise it will be
418            collected very late if at all and it holds some references to e.g.
419            shapestores and the session which can lead to leaks (of e.g. the
420            temporary files)
421    
422            * test/test_load.py (TestSingleLayer.test_leak): New. test for the
423            resource leak in load_session
424    
425    2003-11-10  Bernhard Herzog  <[email protected]>
426    
427            * Thuban/UI/baserenderer.py: Add a way to specify how layers in
428            extensions are to be rendered.
429            (_renderer_extensions): New. List with renderer for layers in
430            extensions
431            (add_renderer_extension): New. Add a renderer extension
432            (init_renderer_extensions): New. Init the renderer extensions
433            (BaseRenderer.render_map_incrementally): Search
434            _renderer_extensions for how to draw unknown layer types
435            (BaseRenderer.draw_raster_data): Add format parameter so that
436            formats other than BMP can be drawn
437            (BaseRenderer.draw_raster_layer): Pass an explicit format to
438            draw_raster_data
439    
440            * Thuban/UI/renderer.py (raster_format_map): New. Mapping form the
441            strings of the format parameter of draw_raster_data method to wx
442            constants
443            (MapRenderer.draw_raster_data): Add the format parameter and use
444            raster_format_map to map it to the right wxwindows constant for
445            wxImageFromStream
446    
447            * test/test_baserenderer.py (SimpleRenderer.draw_raster_data): Add
448            the format parameter and record it
449            (TestBaseRenderer.test_raster_no_projection): check the format
450            paramter of the draw_raster_data method
451            (TestBaseRenderer.test_renderer_extension): New. Test the renderer
452            extension facility
453    
454    2003-11-07  Bernhard Herzog  <[email protected]>
455    
456            Tweak the usage of the sqlite database to make common use cases
457            more responsive. In most cases copying the data to the sqlite
458            database takes so long that using sqlite doesn't have enough
459            advantages.
460    
461            * Thuban/Model/transientdb.py (TransientTableBase.ValueRange): Add
462            comments about performance and query the min and max in separate
463            statements because only that way will indexes be used.
464            (TransientTableBase.UniqueValues): Add some comments about
465            performance.
466            (AutoTransientTable.ValueRange, AutoTransientTable.UniqueValues):
467            Do not copy the data to the transient DB but use the transient
468            copy if it exists. See the new comments for the performance trade
469            offs
470    
471            * test/test_transientdb.py
472            (TestTransientTable.test_auto_transient_table): Make sure that the
473            data is copied to the transient database at some point.
474    
475    2003-11-03  Bernhard Herzog  <[email protected]>
476    
477            * Thuban/Model/data.py (ShapefileStore.ShapesInRegion): Bind some
478            globals to locals so that it's a bit faster
479    
480    2003-11-03  Bernhard Herzog  <[email protected]>
481    
482            * Thuban/UI/baserenderer.py
483            (BaseRenderer.draw_shape_layer_incrementally): Use the ReadValue
484            method. ReadValue is faster than ReadRowAsDict since it only reads
485            one cell especially now that the dbf file objects actually
486            implement it.
487    
488            * Thuban/Model/table.py (DBFTable.ReadValue): Use the new
489            read_attribute method of the dbf objects
490    
491    2003-11-03  Bernhard Herzog  <[email protected]>
492    
493            * Extensions/profiling/profiling.py (popup_dialog_box): New config
494            variable to indicate whether the result should be shown in a
495            dialog box
496            (profile_screen_renderer, time_screen_renderer): Only show a
497            dialog box if popup_dialog_box is true.
498            (profile_screen_renderer): Flush stdout after the printing the
499            first part of the "profiling..." message
500    
501            * Thuban/UI/baserenderer.py
502            (BaseRenderer.draw_shape_layer_incrementally): Cache the pens and
503            brushes for the groups so that they're not created over and over
504            again
505    
506            * Thuban/Model/classification.py (Classification.__getattr__)
507            (Classification._compile_classification)
508            (Classification._clear_compiled_classification): New. Methods to
509            manage a 'compiled' representation of the classification groups
510            which is created on demand
511            (Classification.InsertGroup, Classification.RemoveGroup)
512            (Classification.ReplaceGroup): reset the compiled representation
513            (Classification.FindGroup): Use the compiled representation to
514            find the matching group
515            (ClassGroupRange.GetRangeTuple): New. Return the range as a tuple
516    
517    2003-10-31  Bernhard Herzog  <[email protected]>
518    
519            * Thuban/Model/classification.py (Classification.SetDefaultGroup):
520            Send a CLASS_CHANGED message
521            (Classification.RemoveGroup): Send a CLASS_CHANGED message and do
522            not return the removed group since it wasn't used.
523    
524            * test/test_classification.py
525            (TestClassification.test_set_default_group): New. Test the
526            SetDefaultGroup method
527            (TestClassification.test_insert_group): New. Test the InsertGroup
528            method
529            (TestClassification.test_remove_group): New. Test the RemoveGroup
530            method
531            (TestClassification.test_replace_group): New. Test the
532            ReplaceGroup method
533    
534    2003-10-31  Bernhard Herzog  <[email protected]>
535    
536            * test/test_classification.py (TestClassification.setUp):
537            Subscribe to the CLASS_CHANGED messages
538            (TestClassification.tearDown): New. Destroy the classification
539            properly
540            (TestClassification.test_defaults): Add tests for the default line
541            width and whether no messages were sent yet
542            (TestClassification.test_set_default_properties): Add tests for
543            messages and setting the default line width
544            (TestClassification.test_add_singleton)
545            (TestClassification.test_add_range)
546            (TestClassification.test_multiple_groups): Add tests for messages
547    
548    2003-10-31  Bernhard Herzog  <[email protected]>
549    
550            Some more refactoring in preparation for new tests:
551    
552            * test/test_classification.py (TestClassification.setUp): New.
553            Instantiate the classification here. Update the test methods
554            accordingly.
555            (TestClassification.test_multiple_groups): Make sure that the two
556            singletons matching 1 are considered different.
557    
558    2003-10-31  Bernhard Herzog  <[email protected]>
559    
560            * test/test_classification.py (red, green, blue): New. These
561            constants were used in several cases. Update the relevant methods.
562            (TestClassification.test_defaults)
563            (TestClassification.test_set_default_properties)
564            (TestClassification.test_add_singleton)
565            (TestClassification.test_add_range)
566            (TestClassification.test_multiple_groups)
567            (TestClassification.test_deepcopy): New. These were formerly all
568            part of the single method test.
569            (TestClassification.test_deepcopy): Removed.
570            (TestClassIterator): Removed. The test case is now a method of
571            TestClassification since it tests part of the public interface of
572            Classification
573            (TestClassification.test_iterator): New. Used to be
574            TestClassIterator effectively
575    
576    2003-10-31  Jan-Oliver Wagner <[email protected]>
577    
578            GUIfied the functions of the profiling extension.
579    
580            * /Extensions/profiling/__init__.py: New: Init to make this
581            directory a package.
582    
583            * Extensions/profiling/profiling.py: Moved menu entries to
584            the Extensions menu. Applied _() for strings.
585            (profile_screen_renderer): Catch the detailed printout and present
586            it in a dialog.
587            (time_screen_renderer): Raise a dialog to present the result instead
588            of printing it to stdout.
589    
590    2003-10-31  Bernhard Herzog  <[email protected]>
591    
592            * test/test_classification.py (TestClassGroupProperties)
593            (TestClassGroup, TestClassGroupDefault, TestClassGroupRange)
594            (TestClassGroupSingleton, TestClassIterator, TestClassification):
595            Split TestClassification into several classes, one for each class
596            being tested. TestClassification itself now only tests
597            Classification. This split makes changes to the tests a bit easier
598    
599    2003-10-31  Bernhard Herzog  <[email protected]>
600    
601            * Extensions/profiling/profiling.py: New. Extension to measure
602            Thuban performance
603    
604    2003-10-31  Frank Koormann <[email protected]>
605    
606            Added two items to legend popup menu: Remove Layer and Show Layer Table
607    
608            * Thuban/UI/legend.py (LegendPanel._OnRemoveLayer,
609            LegendPanel._OnShowTable): New event handlers, call the corresponding
610            mainwindow methods.
611            (LegendTree._OnRightClick): Added items to popup menu.
612    
613    2003-10-30  Bernhard Herzog  <[email protected]>
614    
615            * Thuban/UI/dialogs.py (ThubanFrame.__init__): Handle
616            EVT_WINDOW_DESTROY
617            (ThubanFrame.OnDestroy): New. Handler for EVT_WINDOW_DESTROY. Does
618            nothing but is convenient for the derived classes.
619    
620            * Thuban/UI/tableview.py
621            (TableFrame.OnDestroy, LayerTableFrame.OnDestroy): New.
622            Unsubscribe the messages here not in OnClose because that might
623            get called multiple times. Fixes RT #2196
624            (TableFrame.OnClose, LayerTableFrame.OnClose): Removed. Not needed
625            anymore.
626    
627            * README: Update the minimum requirement for wxPython. Since we
628            now use the EVT_WINDOW_DESTROY event, we need at least 2.4.0.4,
629            the version in which that was introduced for all platforms
630    
631    2003-10-30  Frank Koormann <[email protected]>
632    
633            * Thuban/UI/join.py (JoinDialog.OnJoin): Wrapped the major parts of
634            the join process in a ThubanBeginBusyCursor, ThubanEndBusyCursor
635            frame.
636    
637    2003-10-30  Jan-Oliver Wagner <[email protected]>
638    
639            Improved APR import extension, added further EPSG definitions
640            and some cleanup regarding string class.
641    
642            * test/test_proj.py (TestProjection.test_get_projection_units_geo):
643            Added test for alias 'longlat'.
644    
645            * Resources/Projections/epsg-deprecated.proj: New. Contains
646            deprecated EPSG definitions.
647    
648            * Extensions/importAPR/odb.py (ODBBaseObject.TreeInfo): Added
649            the variable names for objects.
650    
651            * Extensions/importAPR/apr.py (APR_BLnSym, APR_BMkSym, APR_BShSym): New.
652            Copied from importAPR and provided with documentation.
653    
654            * Extensions/importAPR/importAPR.py (APR_BLnSym, APR_BMkSym, APR_BShSym):
655            Moved to apr.py.
656            (APR_View): Added object ref 'ITheme'.
657    
658            * Thuban/Lib/fileutil.py, Thuban/UI/proj4dialog.py: Replaced string
659            split function by corresponding use of the string class method.
660    
661            * Thuban/Model/xmlwriter.py: Replaced string replace function by
662            corresponding string method.
663    
664    2003-10-29  Bernhard Herzog  <[email protected]>
665    
666            * Thuban/UI/baserenderer.py
667            (BaseRenderer.draw_shape_layer_incrementally): Speed up the
668            special case of a classification that only has the default group
669    
670    2003-10-27  Bernhard Herzog  <[email protected]>
671    
672            * po/fr.po, po/es.po: Updated translations from Daniel Calvelo
673    
674            * po/de.po: Update.
675    
676            * Thuban/UI/application.py
677            (ThubanApplication.ShowExceptionDialog): Handle translation of the
678            dialog message properly
679    
680    2003-10-27  Bernhard Herzog  <[email protected]>
681    
682            Rework how localization works so that we use wx's translation
683            functions when running Thuban as a normal application but not when
684            we don't need any UI, such as in the test suite. See the comment
685            in Thuban/__init__.py for details
686    
687            * Thuban/__init__.py (_): Add one level of indirection to make the
688            translation handling more flexible and to make it possible to use
689            either wx's translation services or not.
690            (gettext_identity, translation_function_installed)
691            (install_translation_function): New function to help with this
692    
693            * Thuban/UI/__init__.py: Install the wx specific translation
694            function if it's OK to do that
695    
696            * test/support.py (initthuban): Install a dummy translation
697            function so that importing Thuban.UI doesn't install a wx specific
698            one for which would need to import wxPython
699    
700    2003-10-27  Bernhard Herzog  <[email protected]>
701    
702            * HOWTO-Release: Source archives should be created first and the
703            binary packages should be created from the source archives.
704            There's an official debian package now so there's no need to test
705            the rpm on debian anymore
706    
707    2003-10-27  Bernhard Herzog  <[email protected]>
708    
709            Several rendering changes:
710    
711             - Render the selection into a separate bitmap so that only that
712               bitmap needs to be redrawn when the selection changes
713    
714             - Render incrementally showing previews and allowing interaction
715               before rendering is complete
716    
717             - Update the renderer interface a bit. Most parameters of
718               RenderMap are now parameters of the constructor
719    
720            * Thuban/UI/baserenderer.py (BaseRenderer.__init__): Add the map
721            and the update region as parameters. Update the doc-string
722            (BaseRenderer.render_map_incrementally): New. Generator function
723            to renders the map incrementally
724            (BaseRenderer.render_map): Remove the map argument (it's now in
725            the constructor) and simply iterate over the
726            render_map_incrementally generator to draw the map.
727            (BaseRenderer.draw_shape_layer_incrementally)
728            (BaseRenderer.draw_shape_layer): Renamed to
729            draw_shape_layer_incrementally and changed into a generator that
730            yields True every 500 shapes. Used by render_map_incrementally to
731            render shape layers incrementally
732    
733            * Thuban/UI/renderer.py (ScreenRenderer.RenderMap): Removed the
734            map and region parameters which are now in the constructor
735            (ScreenRenderer.RenderMapIncrementally): New. Public frontend for
736            the inherited render_map_incrementally.
737            (BaseRenderer.draw_shape_layer): Removed.
738            (ScreenRenderer.draw_selection_incrementally): New. The selection
739            drawing part of the removed draw_shape_layer as a generator
740            (ScreenRenderer.layer_shapes): Update because of the region
741            parameter change
742            (ExportRenderer.__init__): New. Extend the inherited constructor
743            with the destination region for the drawing
744            (ExportRenderer.RenderMap): Removed the map and region parameters
745            which are now in the constructor
746    
747            * Thuban/UI/view.py (MapCanvas.PreviewBitmap): New. Return a
748            bitmap suitable for a preview in a tool
749            (CanvasPanTool.MouseMove): Use the PreviewBitmap method to get the
750            bitmap
751            (MapPrintout.draw_on_dc): Adapt to new renderer interface
752            (MapCanvas.OnPaint): Handle drawing the selection bitmap if it
753            exists
754            (MapCanvas.OnIdle): Update the logic to deal with incremental
755            rendering and the selection bitmap
756            (MapCanvas._do_redraw): Handle the instantiation of the render
757            iterator and the redraws during rendering
758            (MapCanvas._render_iterator): New. Generator to incrementally
759            redraw both bitmaps
760            (MapCanvas.Export): Adapt to new renderer interface.
761            (MapCanvas.full_redraw): Reset the selection bitmap and the
762            renderer iterator too
763            (MapCanvas.redraw_selection): New. Force a redraw of the selection
764            bitmap
765            (MapCanvas.shape_selected): Only redraw the selection bitmap
766    
767            * test/test_baserenderer.py
768            (TestBaseRenderer.test_polygon_no_projection)
769            (TestBaseRenderer.test_raster_no_projection)
770            (TestBaseRenderer.test_point_map_projection)
771            (TestBaseRenderer.test_point_layer_and_map_projection)
772            (TestBaseRenderer.test_point_layer_projection)
773            (TestBaseRenderer.test_point_with_classification): Adapt to new
774            renderer interface
775    
776    2003-10-24  Bernhard Herzog  <[email protected]>
777    
778            * libraries/thuban/wxproj.cpp (draw_polygon_shape)
779            (point_in_polygon_shape, shape_centroid): Raise an exception if
780            the shape can't be read. Previously invalid shape ids would lead
781            to a segfault.
782    
783            * test/test_wxproj.py (TestShapeCentroid.test_invalid_shape_id):
784            New. test whether an exception is raised for invalid shape ids
785    
786    2003-10-24  Jan-Oliver Wagner <[email protected]>
787    
788            * Thuban/Model/proj.py (Projection.GetProjectedUnits): Added 'longlat'
789            as alias for 'latlong'.
790    
791            * Thuban/UI/projdialog.py (ProjFrame.__init__): Added 'longlat'
792            as alias for 'latlong'.
793    
794    2003-10-24  Jan-Oliver Wagner <[email protected]>
795    
796            * Thuban/UI/projdialog.py (ProjFrame.proj_selection_changed): Set
797            the projection even for the UnknownPanel.
798            (UnknownProjPanel.__init__): Define the text and create the textctrl
799            widget.
800            (UnknownProjPanel._DoLayout): Replaced static text widget by the
801            textctrl created in __init__.
802            (UnknownProjPanel.SetProjection): Set the text for the text ctrl
803            including the parameters of the projection.
804            
805    2003-10-24  Jan-Oliver Wagner <[email protected]>
806    
807            * Resources/Projections/epsg.proj: New. This is a list of
808            EPSG codes with parameters for proj. The list has been
809            generated using devtools/create_epsg.py based on the
810            file nad/epsg of the proj 4.4.7 package. Four projection
811            definitions have been deleted as they are not accepted by proj:
812            "CH1903+ / LV95", "Bern 1898 (Bern) / LV03C", "CH1903 / LV03"
813            and "HD72 / EOV".
814    
815    2003-10-22  Bernhard Herzog  <[email protected]>
816    
817            Some more tweaks to the projection dialog which should fix RT
818            #1886.
819    
820            * Thuban/UI/projlist.py (ProjectionList.Destroy): Unsubscribe from
821            the ProjFile's messages and call the base class methods correctly
822            (ProjectionList.SelectProjection): Set the wxLIST_STATE_FOCUSED
823            flag on the newly selected item too. Otherwise some other item is
824            focused and the first time the focus is moved with the keyboard
825            the selection moves in unexpected ways.
826    
827            * Thuban/UI/projdialog.py (ProjFrame.__init__): Do not set the
828            focus on the OK button, only on the projection list. That way the
829            list really has the focus initially
830            (ProjFrame.OnClose): Call the projection list's Destroy method to
831            make it unsubscribe all messages
832    
833    2003-10-21  Bernhard Herzog  <[email protected]>
834    
835            Rework the projection dialog to fix a few bugs, including RT 2166
836            and most of 2168
837    
838            * Thuban/UI/projlist.py: New. The class ProjectionList is a
839            special wxListCtrl to show a list of projections in a more MVC
840            fashion
841    
842            * Thuban/UI/projdialog.py (ProjFrame): Substantial changes
843            throughout the class. The main change is to use the ProjectionList
844            class instead of a normal wxListBox. Also, add an explicit
845            "Unknown" projection to the projection choice control.
846            (ProjPanel.__init__): Add an "unknown" ellipsoid
847            (TMPanel.__init__, LCCPanel.__init__): Tweak the order of
848            instantiation of the panel's controls to make the tab-order more
849            natural
850    
851    2003-10-21  Bernhard Herzog  <[email protected]>
852    
853            * test/test_load.py (TestSingleLayer.file_contents)
854            (TestSingleLayer.test): Add non-ascii characters to the titles of
855            session, map and layer. This is effectively a port of the
856            TestUnicodeStrings test in test_load_0_8.py which for some reason
857            was only added there.
858    
859            * test/test_load_0_9.py (TestSingleLayer.file_contents)
860            (TestSingleLayer.test): Same as in test_load.py: add non-ascii
861            characters to the titles of session, map and layer,.
862    
863    2003-10-21  Bernhard Herzog  <[email protected]>
864    
865            Add EPSG projection handling to .thuban files
866    
867            * test/test_save.py (SaveSessionTest.dtd)
868            (SaveSessionTest.testEmptySession)
869            (SaveSessionTest.testLayerProjection)
870            (SaveSessionTest.testRasterLayer)
871            (SaveSessionTest.testClassifiedLayer)
872            (SaveSessionTest.test_dbf_table)
873            (SaveSessionTest.test_joined_table)
874            (SaveSessionTest.test_save_postgis): Update to 1.0-dev namespace
875            (SaveSessionTest.testSingleLayer): Update to 1.0-dev namespace and
876            use a and epsg projection to test saving them
877    
878            * test/test_load.py (LoadSessionTest.dtd): Update to 1.0-dev
879            namespace
880            (TestLayerVisibility.file_contents, TestLabels.file_contents)
881            (TestLayerProjection.file_contents)
882            (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
883            (TestPostGISLayer.file_contents)
884            (TestPostGISLayerPassword.file_contents)
885            (TestLoadError.file_contents, TestLoadError.test): Update to use
886            1.0-dev namespace
887            (TestSingleLayer.file_contents, TestSingleLayer.test): Update to
888            use 1.0-dev namespace and use an EPSG projection to test whether
889            loading it works
890    
891            * test/test_load_0_9.py: New. Effectively a copy of test_load.py
892            as of Thuban 0.9. These are now tests to determine whether Thuban
893            can still read files generated by Thuban 0.9
894    
895            * Thuban/Model/save.py (SessionSaver.write)
896            (SessionSaver.write_session): Use the 1.0 dtd and 1.0-dev
897            namespace
898            (SessionSaver.write_projection): Write the projection's epsg
899            attribute
900    
901            * Thuban/Model/load.py (SessionLoader.__init__): Also accept the
902            thuban-1.0-dev.dtd namespace
903            (SessionLoader.check_attrs): Allow a callable object as conversion
904            too
905            (SessionLoader.start_projection, SessionLoader.end_projection)
906            (SessionLoader.start_parameter): Handle the epsg attribute and
907            rename a few instance variables to lower case
908    
909            * Resources/XML/thuban-1.0.dtd: New. Only difference to
910            thuban-0.9.dtd is the epsg attribute for projections.
911    
912    2003-10-21  Bernhard Herzog  <[email protected]>
913    
914            * test/runtests.py (main): Let the user specify which tests to run
915            on the command line
916    
917            * test/support.py (ThubanTestResult.getDescription): Override to
918            give a better short description. The description can be used as a
919            parameter to run_tests to run that particular test in isolation.
920    
921    2003-10-21  Frank Koormann   <[email protected]>
922    
923            Popup menu for legend. Scheduled for the 1.2 release this was too
924            simple to implement: The popup menu is bound to the legend tree, while
925            the events are hanlded by its anchestor, the legend panel. This
926            allows reuse of all the event handlers already implemented for the
927            legend toolbar buttons.
928    
929            * Thuban/UI/legend.py (LegendPanel.__init__): EVT_MENU macros
930            to add handlers for the events issued by the popup menu.
931            (LegendPanel._OnToggleVisibility): Handler for toggling layer
932            visibility event
933            (LegendPanel._OnProjection): Handler for layer projection event.
934            (LegendTree.__init__): Added EVT_TREE_ITEM_RIGHT_CLICK
935            (LegendTree._OnRightClick): Event handler for right click, select item
936            and pop up menu.
937            (LegendTree.ToggleVisibility): Toggle layer visibility
938            (LegendTree.LayerProjection): Raise layer projection dialog for
939            current layer.
940    
941    2003-10-21  Bernhard Herzog  <[email protected]>
942    
943            * Resources/Projections/defaults.proj: Use correct DOCTYPE
944            declaration. The top-level element is projectionlist not projfile
945    
946    2003-10-20  Bernhard Herzog  <[email protected]>
947    
948            * Thuban/UI/projdialog.py (ProjFrame.write_proj_file): New. helper
949            method to write a projfile and display a busy cursor and error
950            dialogs.
951            (ProjFrame._OnSave, ProjFrame._OnAddToList, ProjFrame._OnImport)
952            (ProjFrame._OnExport, ProjFrame._OnRemove): Use write_proj_file
953            (ProjFrame.__FillAvailList): Translate "<None>" too and display a
954            busy cursor while loading the user and system prj files.
955    
956    2003-10-16  Bernhard Herzog  <[email protected]>
957    
958            * Thuban/Model/resource.py (projfile_cache): Introduce a cache for
959            ProjFile objects
960            (clear_proj_file_cache): New function to clear the cache. Mainly
961            useful for use by the test suite
962            (read_proj_file): Use the cache.
963    
964            * test/test_proj.py (TestProjFile): Clarify the doc-string
965            (ProjFileReadTests): Update doc-string
966            (ProjFileReadTests.test_get_system_proj_file): Check whether the
967            system proj files is cached.
968            (ProjFileLoadTestCase): New base class for the proj file tests
969            derived from support.FileLoadTestCase to provide some common
970            behavior.
971            (TestLoadingProjFile)
972            (TestLoadingProjFileWithEmptyProjectionlist.file_contents)
973            (TestProjFileWithInvalidParameters.file_contents): Derive from
974            ProjFileLoadTestCase
975            (TestLoadingProjFile.test_caching): New. Test whether the cache
976            works
977    
978    2003-10-16      Silke Reimer    <[email protected]>
979    
980            * debian/*: New directory with configuration files for building a thuban
981              deb-package.
982    
983    2003-10-14  Bernhard Herzog  <[email protected]>
984    
985            * test/test_proj.py: Execute support.run_tests when run as
986            __main__ so that missing unsubscribes are detected
987            (TestProjFile.tearDown): Destroy the proj_file properly
988    
989    2003-10-14  Bernhard Herzog  <[email protected]>
990    
991            * Thuban/Model/messages.py (PROJECTION_ADDED)
992            (PROJECTION_REPLACED, PROJECTION_REMOVED): New message types for
993            the ProjFile objects
994    
995            * Thuban/Model/proj.py (ProjFile): Derive from Publisher so we can
996            easily send messages when the projections change
997            (ProjFile.Add, ProjFile.Remove, ProjFile.Replace): Issue messages
998            when the change was successful
999    
1000            * test/test_proj.py (TestProjFile.setUp): Subscribe to some of the
1001            proj file messages
1002            (TestProjFile.test_add_remove)
1003            (TestProjFile.test_remove_non_existing)
1004            (TestProjFile.test_replace)
1005            (TestProjFile.test_replace_non_existing): Test whether the right
1006            messages are sent
1007    
1008    2003-10-14  Bernhard Herzog  <[email protected]>
1009    
1010            * test/test_proj.py (TestProjFile.test): Refactor into several
1011            tests
1012            (TestProjFile.test_add_remove)
1013            (TestProjFile.test_remove_non_existing)
1014            (TestProjFile.test_replace)
1015            (TestProjFile.test_replace_non_existing): Some of the new
1016            individual test cases
1017            (TestProjFileSimple): New class for the rest of the test cases
1018            that came out of the refactoring
1019            (ProjFileTest): Derive from xmlsupport.ValidationTest so that the
1020            derived classes don't have to
1021    
1022    2003-10-13  Bernhard Herzog  <[email protected]>
1023    
1024            Add an optional EPSG code to the projection objects and extend the
1025            .proj file format accordingly.
1026    
1027            * Resources/XML/projfile.dtd (element projection): Add epsg
1028            attribute
1029    
1030            * Thuban/Model/proj.py (Projection.__init__): New parameter and
1031            instance variable epsg. Update doc-string
1032            (Projection.EPSGCode, Projection.Label): New methods to provide
1033            access to EPSG code and a label for use in dialogs
1034    
1035            * Thuban/Model/resource.py (ProjFileReader.start_projection)
1036            (ProjFileReader.end_projection, ProjFileSaver.write_projfile):
1037            Handle the epsg code attribute when reading or writing proj files
1038    
1039            * Thuban/UI/projdialog.py (ProjFrame._OnSave)
1040            (ProjFrame._OnAddToList, ProjFrame.__DoOnProjAvail)
1041            (ProjFrame.__FillAvailList): Use the projection's Label method to
1042            get the string for the list box
1043    
1044            * test/test_proj.py (TestProjection.test_label)
1045            (TestProjection.test_label_epsg)
1046            (TestProjection.test_epsgcode_for_non_epsg_projection)
1047            (TestProjection.test_epsgcode_for_real_epsg_projection): New tests
1048            for the label and EPSGCode methods
1049            (WriteProjFileTests.doTestWrite, WriteProjFileTests.test_write)
1050            (WriteProjFileTests.test_write_empty_file): Create the ProjFile
1051            objects in the test cases and put the expected contents into the
1052            test case methods too. Update doTestWrite accordingly
1053            (TestLoadingProjFile)
1054            (TestLoadingProjFileWithEmptyProjectionlist): New classes with the
1055            read tests from TestProjFile.
1056            (TestProjFile.doTestRead, TestProjFile.testRead): Removed. These
1057            tests are now in the new classes.
1058            (sample_projfile, sample_projfile_data)
1059            (sample_projfile2, sample_projfile_data2): Removed. Not used
1060            anymore.
1061            (TestProjFile.test_read_unreadable_file): No need to reset the
1062            permissions at the end anymore since we use a unique filename
1063    
1064    2003-10-13  Bernhard Herzog  <[email protected]>
1065    
1066            * test/test_proj.py: Some more refactoring of the test cases
1067            (ProjFileTest): New base class for the proj file tests.
1068            (TestProjFile): Derive from ProjFileTest
1069            (TestProjFile.test_read_unreadable_file)
1070            (TestProjFile.test_read_empty_file, TestProjFile.doTestRead): Use
1071            the new filename method to get a unique filename
1072            (TestProjFile.doTestWrite, TestProjFile.testWrite): Removed.
1073            (WriteProjFileTests): New class for proj file write tests.
1074            Contains the write test that were in TestProjFile originally.
1075    
1076    2003-10-13  Bernhard Herzog  <[email protected]>
1077    
1078            * test/test_proj.py (TestProjFile.testRead)
1079            (TestProjFile.test_read_non_existing_file)
1080            (TestProjFile.test_read_unreadable_file)
1081            (TestProjFile.test_read_empty_file): Split into several methods.
1082    
1083    2003-10-10  Bernhard Herzog  <[email protected]>
1084    
1085            * Thuban/UI/sizers.py: New file with custom sizers.
1086    
1087            * Thuban/UI/projdialog.py (ProjFrame.build_dialog): Instantiate
1088            all projection type specific panels and put them into a
1089            NotebookLikeSizer. This way the dialog doesn't change its size
1090            when a different projection is selected
1091            (ProjFrame.__init__): Rename projection_panels
1092            projection_panel_defs and reuse projection_panels for a list of
1093            the instantiated panels.
1094            (ProjFrame._show_proj_panel, ProjFrame.__DoOnProjAvail)
1095            (ProjFrame.__DoOnProjChoice): Changes due to the new handling of
1096            the panels
1097            (UnknownProjPanel._DoLayout): Place the newlines in the message
1098            differently to make the panel narrower.
1099            (TMPanel._DoLayout): Layout the parameters in one column.
1100    
1101    2003-10-10  Bernhard Herzog  <[email protected]>
1102    
1103            * Thuban/UI/projdialog.py (ProjFrame.build_dialog): New method
1104            that contains all the setup for the dialog's widgets, layout and
1105            event handling.
1106            (__): Call build_dialog to build the dialog.
1107            (ProjFrame.__set_properties, ProjFrame.__do_layout): Removed.
1108            Their functionality is now in build_dialog
1109            (ProjFrame.__VerifyButtons, ProjFrame.__VerifyButtons)
1110            (ProjFrame.__DoOnProjAvail, ProjFrame.__DoOnProjAvail)
1111            (ProjFrame.__DoOnProjChoice): Small updates due to slightly
1112            different widget names and hierarchy introduced with build_dialog.
1113    
1114    2003-10-10  Bernhard Herzog  <[email protected]>
1115    
1116            * README: Fix typo.
1117    
1118    2003-10-09  Bernhard Herzog  <[email protected]>
1119    
1120            * Thuban/Model/proj.py (ProjFile.Add): Do not check whether the
1121            projection is already in the list. This is *a lot* faster when
1122            loading files with hundreds of projections since it saves a linear
1123            search. OTOH this will allow adding the same projection to the
1124            user.proj file multiple times in the projection dialog but we'll
1125            deal with that later
1126    
1127    2003-10-09  Jan-Oliver Wagner <[email protected]>
1128    
1129            * devtools: New. Directory for developer tools that are not intended
1130            for the regular user.
1131    
1132            * devtools/create_epsg.py: New. Convert the epsg file of proj into
1133            a python .proj file.
1134    
1135    2003-10-09  Bernhard Herzog  <[email protected]>
1136    
1137            * test/test_proj.py
1138            (TestProjection.test_get_parameter_without_equals_sign): New. Test
1139            whether GetParameter handles parameters without "=" sign correctly
1140    
1141            * Thuban/Model/proj.py (Projection.GetParameter): Handle
1142            parameters that do not contain a "=". Update the doc-string
1143    
1144    2003-10-08  Bernhard Herzog  <[email protected]>
1145    
1146            * Thuban/UI/projdialog.py (ProjFrame.__set_properties): Remove the
1147            length limit on the projname text control
1148    
1149    2003-10-08  Bernhard Herzog  <[email protected]>
1150    
1151            * test/test_proj.py (TestProjection.test_get_projection_units_geo)
1152            (TestProjection.test_get_projection_units_normal): New. Tests for
1153            the Projection.GetProjectedUnits method
1154    
1155    2003-10-08  Jan-Oliver Wagner <[email protected]>
1156    
1157            * Thuban/Model/resource.py (get_user_proj_file): small bug-fix:
1158            Added missing 'val' parameter.
1159    
1160    2003-10-08  Bernhard Herzog  <[email protected]>
1161    
1162            * Thuban/UI/projdialog.py (ProjFrame.__DoOnProjAvail): When the
1163            projection type of the currently selected projection is not known,
1164            i.e. there's no panel for it, use the UnknownProjPanel
1165            (ProjFrame.__DoOnProjChoice, ProjFrame._show_proj_panel): Split
1166            the actual replacing of the proj panel into the new method
1167            _show_proj_panel.
1168            (UnknownProjPanel): Add doc-string.
1169            (UnknownProjPanel._DoLayout): Insert a newline into the text so
1170            that the panel is not so wide.
1171    
1172    2003-10-08  Bernhard Herzog  <[email protected]>
1173    
1174            * Thuban/Model/resource.py (read_proj_file): Return the warnings
1175            too. Update the doc-string
1176            (get_proj_files): Removed. It wasn't used anywhere
1177            (get_system_proj_files, get_system_proj_file): Rename to
1178            get_system_proj_file and return the ProjFile object and not a list
1179            of ProjFile objects. Update the callers.
1180            (get_user_proj_files, get_user_proj_file): Rename to
1181            get_user_proj_file return the ProjFile object and not a list of
1182            ProjFile objects. Update the callers.
1183            (ProjFileReader.__init__): New instance variable for the warnings.
1184            Rename the __pf ivar to projfile. Update the methods referring to
1185            __pf
1186            (ProjFileReader.end_projection): Catch any errors raised when
1187            instantiating the projection and record that as an error. The
1188            projection will not be in the final ProjFile object.
1189            (ProjFileReader.GetWarnings): New method to return the warnings.
1190    
1191            * Thuban/UI/projdialog.py (ProjFrame.show_warnings): New method to
1192            show the warnings from the projfile reader
1193            (ProjFrame._OnImport): Deal with any warnings returned by
1194            read_proj_file
1195            (ProjFrame.__FillAvailList): Deal with any warnings returned by
1196            get_system_proj_file or get_user_proj_file.
1197    
1198            * test/test_proj.py (TestProjFile.doTestRead): Check the warnings.
1199            (TestProjFileWithInvalidParameters.file_contents): New test cases
1200            to test whether read_proj_file handles invalid projection
1201            parameters correctly
1202            (TestProjFile.test_get_system_proj_file): New. Simple test for
1203            resource.get_system_proj_file
1204    
1205    2003-10-07  Bernhard Herzog  <[email protected]>
1206    
1207            * test/test_derivedshapestore.py
1208            (TestDerivedShapeStoreExceptions.tearDown): Clear the session
1209            properly so that the temporary directories get deleted correctly
1210    
1211    2003-10-06  Bernhard Herzog  <[email protected]>
1212    
1213            Handle the title changes in a proper MVC way.
1214    
1215            * Thuban/UI/mainwindow.py (MainWindow.__init__): Subscribe to the
1216            canvas' TITLE_CHANGED messages
1217            (MainWindow.update_title): New. Update the main window's title
1218            (MainWindow.__SetTitle): Removed. Use update_title instead.
1219            (MainWindow.SetMap): Use update_title instead of __SetTitle
1220            (MainWindow.RenameMap): Do change the window title explicitly
1221            here. That's handled in a proper MVC way now.
1222            (MainWindow.title_changed): New. Subscriber for the TITLE_CHANGED
1223            messages
1224    
1225            * Thuban/Lib/connector.py (Conduit): New class to help classes
1226            that forward messages
1227    
1228            * Thuban/UI/viewport.py: Forward the map's TITLE_CHANGED messages
1229            (ViewPort): Derive from Conduit instead of Publisher
1230            (ViewPort.Subscribe, ViewPort.Unsubscribe): Use the new base class
1231            when calling the inherited versions
1232            (ViewPort._subscribe_map, ViewPort._unsubscribe_map): New helper
1233            methods to subscribe and unsubscribe map messages
1234            (ViewPort.SetMap, ViewPort.Destroy): Use the new helper methods to
1235            handle the map subscriptions
1236            (ViewPort.Map, ViewPort.map_projection_changed)
1237            (ViewPort.layer_projection_changed): Add or update doc-strings
1238    
1239            * test/test_connector.py (TestPublisher.test_issue_simple): Fix
1240            typo
1241            (MyConduit): Helper class for the Conduit test.
1242            (TestConduit): Test cases for Conduit
1243    
1244            * test/test_connector.py: Use support.run_tests as main.
1245    
1246            * test/test_viewport.py (ViewPortTest.setUp): Also subscribe to
1247            the TITLE_CHANGED messages
1248            (ViewPortTest.test_forwarding_title_changed): New test to check
1249            whether the viewport forwards the map's TITLE_CHANGED messages
1250            (TestViewportWithPostGIS.tearDown): Call the map's Destroy method
1251            after the port's because the latter may require a still functional
1252            map.
1253    
1254    2003-10-06  Bernhard Herzog  <[email protected]>
1255    
1256            * Thuban/UI/application.py (ThubanApplication.maps_changed): Add
1257            doc-string
1258    
1259    2003-10-06  Bernhard Herzog  <[email protected]>
1260    
1261            * test/test_viewport.py (ViewPortTest.setUp)
1262            (SimpleViewPortTest.test_init_with_size): Move the test for the
1263            initial size as a constructor parameter from ViewPortTest.setUp
1264            method to a new separate test in SimpleViewPortTest.
1265    
1266    2003-10-06  Bernhard Herzog  <[email protected]>
1267    
1268            * test/test_viewport.py (MockView): New class derived from
1269            ViewPort with a mock implementation of GetTextExtent to be used in
1270            the test cases
1271            (ViewPortTest.setUp): Use MockView instead of ViewPort
1272    
1273            * Thuban/UI/viewport.py (ViewPort.GetTextExtent): Turn this method
1274            into what would be a "pure virtual function" in C++: always raise
1275            NotImplementedError. Mock implementations for test cases don't
1276            belong into the real code
1277    
1278    2003-10-02  Bernhard Herzog  <[email protected]>
1279    
1280            * test/test_layer.py (TestLayer.test_empty_layer): Explicitly
1281            close the dbf file we create so that it's contents have been
1282            written properly.
1283    
1284            * libraries/shapelib/shptree.c, libraries/shapelib/shpopen.c,
1285            libraries/shapelib/shapefil.h, libraries/shapelib/dbfopen.c:
1286            Update to shapelib 1.2.10
1287    
1288    2003-10-01  Jan-Oliver Wagner <[email protected]>
1289    
1290            * Thuban/UI/tree.py, Thuban/UI/main.py: Remove the #! line as
1291            it annoys lintian which warns about these files not being
1292            executable. The #! isn't necessary here since if you absolutely
1293            must execute them you can always say "python <filename>".
1294    
1295    2003-09-26  Bernhard Herzog  <[email protected]>
1296    
1297            * Thuban/Model/classgen.py (GenQuantiles0): Removed since it's
1298            only used in GREAT-ER but not used in Thuban itself. When GREAT-ER
1299            is ported to a newer the import will fail, so it should be noticed
1300            immediately that this function is gone.
1301            Fixes RT#1919
1302    
1303    2003-09-26  Bernhard Herzog  <[email protected]>
1304    
1305            Add a DTD for the projection files and make thuban write valid
1306            projection files
1307    
1308            * Resources/XML/projfile.dtd: New. DTD for thuban's projection
1309            files
1310    
1311            * Thuban/Model/resource.py (ProjFileSaver.write): Use
1312            'projectionlist' as the name in the document type declaration so
1313            that it matches the element type of the root element.
1314    
1315            * test/test_proj.py (sample_projfile, sample_projfile2): Use
1316            'projectionlist' as the name in the document type declaration just
1317            as it is done now in the files thuban would write
1318            (sample_projfile, sample_projfile_data): Fix spelling of
1319            "Mercator"
1320            (TestProjFile.doTestWrite): Validate the written and the expected
1321            XML data
1322            (TestProjFile): Derive from ValidationTest so that we can run xml
1323            validation tests
1324    
1325    2003-09-24  Bernhard Herzog  <[email protected]>
1326    
1327            * Thuban/UI/renderer.py (ExportRenderer.render_legend): Do not
1328            modify the list returned by map.Layers() in place since it is the
1329            actual list of layers used by the map.
1330    
1331    2003-09-23  Jan-Oliver Wagner <[email protected]>
1332    
1333            * Doc/manual/thuban-manual.xml: Added subsection to chapter
1334            Extensions to describe the extensions coming with the Thuban
1335            standard package (gns2shp and importAPR).
1336    
1337    2003-09-23  Bernhard Herzog  <[email protected]>
1338    
1339            * libraries/thuban/wxproj.cpp (project_point): if there's an
1340            inverse but no forward projection, convert to degrees after
1341            applying the inverse projection. Fixes RT#2096
1342    
1343            * test/test_wxproj.py: New. Test cases for wxproj.so. One test
1344            implicitly tests for the fix to RT#2096
1345    
1346            * test/support.py (FloatComparisonMixin.assertFloatSeqEqual):
1347            Check that the sequences have the same lengths
1348    
1349            * Resources/Projections/defaults.proj (Geographic projection): Use
1350            a much more precise value for the to_meter attribute.
1351    
1352    2003-09-22  Bernhard Herzog  <[email protected]>
1353    
1354            * test/support.py (initthuban): Make sure to unset the LANG env.
1355            var. so that tests that compare translated strings work. Solves RT
1356            #2094
1357    
1358    2003-09-22  Jan-Oliver Wagner <[email protected]>
1359    
1360            Small improvement of APR import.
1361    
1362            * Extensions/importAPR/test/test_apr.py (aprTest.test_LClass):
1363            Added tests for text-ranges.
1364    
1365            * Extensions/importAPR/apr.py (APR_LClass.GetThubanRange): Now
1366            returns a string object if the range is based on text.
1367    
1368            * Extensions/importAPR/importAPR.py (import_apr_dialog): Unified
1369            range retrieval.
1370    
1371    2003-09-22  Jan-Oliver Wagner <[email protected]>
1372    
1373            Initial version of the importAPR extension which is in
1374            experimental state.
1375    
1376            * /Extensions/importAPR/, /Extensions/importAPR/samples/,
1377            /Extensions/importAPR/test/: New directories.
1378    
1379            * /Extensions/importAPR/samples/README: New: Howto load the samples.
1380    
1381            * /Extensions/importAPR/samples/iceland.apr: New: A sample APR
1382            file which refers to the Thuban Iceland demo data.
1383    
1384            * /Extensions/importAPR/test/README: New: Howto execute the tests.
1385    
1386            * /Extensions/importAPR/test/test_apr.py: New: Tests for APR classes.
1387    
1388            * /Extensions/importAPR/apr.py: New: Classes for ArcView Objects
1389            as in '.apr'-files.
1390    
1391            * /Extensions/importAPR/odb.py: New: Classes for generic ArcView
1392            ODB Objects as in '.apr', '.avl' and other files.
1393    
1394            * /Extensions/importAPR/__init__.py: New: Init to make this
1395            directory a package.
1396    
1397            * /Extensions/importAPR/importAPR.py: New: Import a ArcView
1398            project file (.apr) and convert it to Thuban.
1399    
1400    2003-09-22  Jan-Oliver Wagner <[email protected]>
1401    
1402            * Extensions/gns2shp.gns2shp.py: The main module of gns2shp.
1403    
1404    2003-09-19  Jan-Oliver Wagner <[email protected]>
1405    
1406            * Doc/manual/thuban-manual.xml: Extended section 'Installation'
1407            with description on RPM installation and RPM binary package
1408            creation.
1409    
1410    2003-09-18  Bernhard Herzog  <[email protected]>
1411    
1412            * setup.py (data_files): Only add the mo files if the Locales
1413            directory actually exists, so that setup.py works with a fresh CVS
1414            checkout
1415    
1416    2003-09-12  Jan-Oliver Wagner <[email protected]>
1417    
1418            * Examples/simple_extensions/simple_tool.py: bugfix: Tool is now
1419            in viewport, not anymore in view
1420    
1421    2003-09-04  Jan-Oliver Wagner <[email protected]>
1422    
1423            Introducing first Extension (gns2shp).
1424    
1425            * Extensions, Extensions/gns2shp, Extensions/gns2shp/test: New.
1426    
1427            * Extensions/__init__.py: New. init to make this dir a package.
1428    
1429            * Extensions/gns2shp/__init__.py: New. init to make this dir a package.
1430    
1431            * Extensions/gns2shp/test/README: New. some info on this test directory.
1432    
1433            * Extensions/gns2shp/test/ls.txt: New. test data set (Liechtenstein).
1434    
1435            * Extensions/gns2shp/test/test_gns2shp.py: New. Test for correct creation
1436            of Shapefile from GNS text file format
1437    
1438    2003-09-03  Jan-Oliver Wagner <[email protected]>
1439    
1440            Fix/workaround for bug #2019:
1441            https://intevation.de/rt/webrt?serial_num=2019
1442    
1443            * Thuban/UI/identifyview.py (IdentifyView.ID_STOP): New.
1444            (IdentifyView.__init__): Added another button that allows to
1445            stop the identify mode.
1446            (IdentifyView.OnStop): New. Stops the identify mode.
1447    
1448    2003-09-03  Jan-Oliver Wagner <[email protected]>
1449    
1450            Introducing a new exception dialog that allows to exit the
1451            application immediately.
1452            This fixes bug #2060: https://intevation.de/rt/webrt?serial_num=2060
1453    
1454            * Thuban/UI/exceptiondialog.py: New. A special exception dialog.
1455    
1456            * Thuban/UI/application.py (ThubanApplication.ShowExceptionDialog):
1457            Made strings available to translations. Exchanged the simple
1458            ScrolledMessageDialog by the new ExceptionDialog.
1459    
1460    2003-09-01  Bernhard Herzog  <[email protected]>
1461    
1462            * NEWS: New. Summary of changes and release notes.
1463    
1464            * MANIFEST.in: Add NEWS
1465    
1466    2003-09-01  Bernhard Herzog  <[email protected]>
1467    
1468            * MANIFEST.in: Correct the include statement for the mo-files and
1469            include the documentation too.
1470    
1471            * setup.py (data_files): Add the .mo files
1472            (setup call): Up to version 0.9.0
1473    
1474    2003-09-01  Bernhard Herzog  <[email protected]>
1475    
1476            * Thuban/UI/dbdialog.py (ChooseDBTableDialog.__init__): Change the
1477            parameter list to just parent and session
1478            (ChooseDBTableDialog.__set_properties): Removed. Setting the
1479            selection of empty list boxes is not allowed (and produces C++
1480            assertion errors) and the rest of the setup is better done in
1481            __init__ anyway.
1482            (ChooseDBTableDialog.OnCancel, ChooseDBTableDialog.OnOK)
1483            (ChooseDBTableDialog.OnLBDClick, DBDialog.OnOK): Use the Python
1484            builtins True/False for booleans to avoid warnings from wxPython
1485    
1486            * Thuban/UI/mainwindow.py (MainWindow.AddDBLayer): Adapt to new
1487            ChooseDBTableDialog constructor parameters.
1488    
1489    2003-09-01  Bernhard Herzog  <[email protected]>
1490    
1491            * Thuban/Model/postgisdb.py
1492            (PostGISTable): Extend doc-string
1493            (PostGISTable._fetch_table_information): Set the column index
1494            correctly, pretending ignored columns don't exist.
1495    
1496            * test/test_postgis_db.py (TestPostGISIgnoredColumns): New tests
1497            for postgis tables with data types not yet supported by thuban.
1498    
1499    2003-08-29  Bernhard Herzog  <[email protected]>
1500    
1501            * HOWTO-Release: Tweak item about running the tests.
1502    
1503    2003-08-29  Jan-Oliver Wagner <[email protected]>
1504    
1505            * /Doc/manual/thuban-manual.xml: updated to version 1.0pre2.
1506    
1507    2003-08-29  Bernhard Herzog  <[email protected]>
1508    
1509            Add some missing parameters to projections. Proj complains about
1510            them on windows but for some reason not on Linux.
1511    
1512            * test/test_save.py (SaveSessionTest.testLayerProjection): Add
1513            missing required projection parameters
1514    
1515            * test/test_proj.py (TestProjFile.test): Add missing required
1516            projection parameters
1517    
1518            * test/test_load_0_8.py (TestLayerProjection.file_contents)
1519            (TestLayerProjection.test): Add missing required projection
1520            parameters and tests for them
1521    
1522            * test/test_load.py (TestLayerProjection.file_contents)
1523            (TestLayerProjection.test): Add missing required projection
1524            parameters and tests for them
1525    
1526            * test/test_layer.py (TestLayer.test_base_layer): Add missing
1527            required projection parameters
1528    
1529    2003-08-29  Bernhard Herzog  <[email protected]>
1530    
1531            * libraries/pyprojection/Projection.i: Use pj_get_errno_ref to
1532            access the pj_errno because directly accessing pj_errno doesn't
1533            work on windows if the proj library is in a DLL
1534    
1535            * libraries/pyprojection/Projection_wrap.c: Update from Projection.i
1536    
1537    2003-08-28  Bernhard Herzog  <[email protected]>
1538    
1539            * test/test_proj.py: Import things from Thuban after calling
1540            initthuban
1541    
1542            * test/test_load.py (LoadSessionTest.filenames): New class
1543            variable with the filename attributes to normalize
1544            (LoadSessionTest.check_format): Pass self.filenames to
1545            sax_eventlist to normalize the filename attributes
1546    
1547            * test/xmlsupport.py: Add cvs keywords
1548            (SaxEventLister.__init__): New parameter filenames which indicates
1549            attributes that contain filenames
1550            (SaxEventLister.startElementNS): Normalize the filename attributes
1551            with os.path.normpath
1552            (sax_eventlist): New parameter filenames to pass through to
1553            SaxEventLister
1554    
1555            * test/test_derivedshapestore.py: Make this file callable as a
1556            program to execute the tests
1557            (TestDerivedShapeStoreExceptions.test_table_with_wrong_size): Bind
1558            the session to self.session so that it gets destroyed properly
1559    
1560            * test/test_layer.py (TestLayer.tearDown): Call the session's
1561            Destroy method
1562    
1563            * test/test_map.py (TestMapBase.tearDown): Destroy self.session
1564            too if it exists
1565            (TestMapAddLayer.test_add_layer): Bind the session to self.session
1566            so that it gets destroyed properly
1567    
1568            * test/postgissupport.py (reason_for_not_running_tests): Add a
1569            test for the existence of popen2.Popen4.
1570    
1571            * test/test_save.py (SaveSessionTest.tearDown): New. Provide a
1572            reliable way to destroy the sessions created in the test cases
1573            (SaveSessionTest.test_dbf_table): Bind the session to self.session
1574            so that it gets destroyed properly
1575            (SaveSessionTest.testLayerProjection): Bind the session to
1576            self.session so that it gets destroyed properly
1577    
1578            * test/test_session.py (UnreferencedTablesTests.tearDown): Make
1579            sure that the session is destroyed properly
1580    
1581            * test/test_shapefilestore.py: Make this callable as a program to
1582            execute the tests
1583    
1584            * test/test_scalebar.py: Remove unnecessary import of _ from
1585            Thuban
1586    
1587            * test/support.py (print_garbage_information): Call initthuban
1588            here because it may be called indirectly from test cases that test
1589            test support modules which do not use anything from thuban itself
1590            (ThubanTestProgram.runTests): Remove unnecessary debug print
1591    
1592    2003-08-28  Bernhard Herzog  <[email protected]>
1593    
1594            * Thuban/version.py (longversion): Update to 0.9
1595    
1596            * Thuban/UI/mainwindow.py: Remove some unused imports
1597    
1598            * README: Add section about required additional software. Add date
1599            and revision CVS keywords
1600    
1601            * HOWTO-Release: Add item about the translations. Add date and
1602            revision CVs keywords and change formatting to match README a bit
1603            better
1604    
1605            * po/de.po: Update for 0.9
1606    
1607            * test/README: Tweak the wording a little because many tests are
1608            not really unittest.
1609    
1610    2003-08-27  Bernhard Herzog  <[email protected]>
1611    
1612            As preparation for the 0.9 release, switch thuban files to a
1613            non-dev namespace
1614    
1615            * Thuban/Model/save.py (SessionSaver.write_session): Write files
1616            with the http://thuban.intevation.org/dtds/thuban-0.9.dtd
1617            namespace
1618    
1619            * Thuban/Model/load.py (SessionLoader.__init__): Accept the
1620            http://thuban.intevation.org/dtds/thuban-0.9.dtd namespace too
1621    
1622            * test/test_save.py (SaveSessionTest.dtd)
1623            (SaveSessionTest.testEmptySession)
1624            (SaveSessionTest.testSingleLayer)
1625            (SaveSessionTest.testLayerProjection)
1626            (SaveSessionTest.testRasterLayer)
1627            (SaveSessionTest.testClassifiedLayer)
1628            (SaveSessionTest.test_dbf_table)
1629            (SaveSessionTest.test_joined_table)
1630            (SaveSessionTest.test_save_postgis): Update for new namespace
1631    
1632            * test/test_load.py (LoadSessionTest.dtd, TestSingleLayer)
1633            (TestLayerVisibility.file_contents, TestLabels.file_contents)
1634            (TestLayerProjection.file_contents)
1635            (TestRasterLayer.file_contents, TestJoinedTable.file_contents)
1636            (TestPostGISLayer.file_contents)
1637            (TestPostGISLayerPassword.file_contents)
1638            (TestLoadError.file_contents, TestLoadError.test): Update for new
1639            namespace
1640    
1641    2003-08-27  Bernhard Herzog  <[email protected]>
1642    
1643            Make the table interface distinguish between row ids (an integer
1644            that uniquely identifies a row) and row ordinals (a simple row
1645            count from 0 to NumRows() - 1)
1646    
1647            * Thuban/Model/postgisdb.py (PostGISTable.RowIdToOrdinal)
1648            (PostGISTable.RowOrdinalToId): New methods to conver between row
1649            ids and row ordinals
1650            (PostGISTable.ReadRowAsDict, PostGISTable.ReadValue): New keyword
1651            parameter row_is_ordinal to indicate whether the row parameter is
1652            the row id or the ordinal
1653    
1654            * Thuban/Model/transientdb.py (TransientTableBase.RowIdToOrdinal)
1655            (TransientTableBase.RowOrdinalToId)
1656            (AutoTransientTable.RowIdToOrdinal)
1657            (AutoTransientTable.RowOrdinalToId): Same new methods as in
1658            PostGISTable.
1659            (TransientTableBase.ReadRowAsDict, TransientTableBase.ReadValue)
1660            (AutoTransientTable.ReadRowAsDict, AutoTransientTable.ReadValue):
1661            Same new parameter as in PostGISTable.
1662    
1663            * Thuban/Model/table.py (DBFTable.RowIdToOrdinal)
1664            (DBFTable.RowOrdinalToId, MemoryTable.RowIdToOrdinal)
1665            (MemoryTable.RowOrdinalToId): Same new methods as in PostGISTable.
1666            (DBFTable.ReadValue, DBFTable.ReadRowAsDict)
1667            (MemoryTable.ReadValue, MemoryTable.ReadRowAsDict): Same new
1668            parameter as in PostGISTable.
1669    
1670            * Thuban/UI/tableview.py (DataTable.RowIdToOrdinal)
1671            (DataTable.RowOrdinalToId): New methods to convert between row ids
1672            and row ordinals.
1673            (TableGrid.SelectRowById): New method to select a row based on its
1674            ID as opposed to its ordinal
1675            (DataTable.GetValue, TableGrid.OnRangeSelect)
1676            (TableGrid.OnSelectCell, LayerTableGrid.select_shapes)
1677            (QueryTableFrame.OnQuery, QueryTableFrame.get_selected)
1678            (LayerTableFrame.__init__): Convert between row ids and row
1679            ordinals as appropriate
1680    
1681            * test/postgissupport.py (PostGISDatabase.__init__): Add
1682            doc-string.
1683            (PostGISDatabase.initdb): The optional third item in a tuple in
1684            tables is now a (key, value) list with additional arguments to
1685            pass to upload_shapefile
1686            (upload_shapefile): New parameter gid_offset to allow gids that
1687            are not the same as the shapeids in the shapefile
1688            (PostgreSQLServer.get_default_static_data_db): Use the new
1689            gid_offset to make the gids in landmarks 1000 higher than the
1690            shapeids in the shapefile
1691    
1692            * test/test_viewport.py
1693            (TestViewportWithPostGIS.test_find_shape_at_point): Adapt to the
1694            new shapeids in the landmarks table
1695    
1696            * test/test_transientdb.py
1697            (TestTransientTable.run_iceland_political_tests)
1698            (TestTransientTable.test_transient_joined_table): Add tests for
1699            the new table methods and new keywords arguments.
1700    
1701            * test/test_postgis_db.py
1702            (TestPostGISTable.test_read_row_as_dict_row_count_mode)
1703            (TestPostGISTable.test_read_value_row_count_mode)
1704            (TestPostGISTable.test_row_id_to_ordinal)
1705            (TestPostGISTable.test_row_oridnal_to_id): New test for the new
1706            table methods and the new arguments
1707            (TestPostGISShapestorePoint.test_shapes_in_region)
1708            (TestPostGISShapestorePoint.test_shape_raw_data)
1709            (TestPostGISShapestorePoint.test_shape_points)
1710            (TestPostGISShapestorePoint.test_shape_shapeid)
1711            (TestPostGISShapestorePoint.test_all_shapes)
1712            (TestPostGISTable.test_simple_query)
1713            (TestPostGISTable.test_simple_query)
1714            (TestPostGISTable.test_simple_query)
1715            (TestPostGISTable.test_read_value)
1716            (TestPostGISTable.test_read_row_as_dict): Adapt to the new
1717            shapeids in the landmarks table
1718    
1719            * test/test_memory_table.py
1720            (TestMemoryTable.test_read_row_as_dict_row_count_mode)
1721            (TestMemoryTable.test_read_value_row_count_mode)
1722            (TestMemoryTable.test_row_id_to_ordinal)
1723            (TestMemoryTable.test_row_oridnal_to_id): New test for the new
1724            table methods and the new arguments
1725    
1726            * test/test_dbf_table.py
1727            (TestDBFTable.test_read_row_as_dict_row_count_mode)
1728            (TestDBFTable.test_read_value_row_count_mode)
1729            (TestDBFTable.test_row_id_to_ordinal)
1730            (TestDBFTable.test_row_oridnal_to_id): New test for the new table
1731            methods and the new arguments
1732    
1733    2003-08-26  Bernhard Herzog  <[email protected]>
1734    
1735            * Thuban/Model/postgisdb.py (PostGISShapeStore.BoundingBox): Use a
1736            more postgis specific but much faster method to get the bounding
1737            box
1738    
1739    2003-08-26  Bernhard Herzog  <[email protected]>
1740    
1741            * Thuban/Model/postgisdb.py (PostGISTable.Title)
1742            (PostGISShapeStore.AllShapes): Add these missing methods.
1743            (PostGISShapeStore.ShapesInRegion): No need to raise
1744            StopIteration. We can simply return
1745    
1746            * test/test_postgis_db.py (TestPostGISTable.test_title)
1747            (TestPostGISShapestorePoint.test_all_shapes): New tests for the
1748            new methods
1749    
1750  2003-08-25  Bernhard Herzog  <[email protected]>  2003-08-25  Bernhard Herzog  <[email protected]>
1751    
1752          * Thuban/Model/postgisdb.py (shapetype_map): Add MUTLIPOLYGON.          * Thuban/Model/postgisdb.py (shapetype_map): Add MUTLIPOLYGON.
# Line 966  Line 2715 
2715    
2716          * Thuban/Model/range.py, Thuban/version.py: Remove the #! line as          * Thuban/Model/range.py, Thuban/version.py: Remove the #! line as
2717          it annoys lintian which warns about these files not being          it annoys lintian which warns about these files not being
2718          executable. The #1 isn't necessary here since if you absolutely          executable. The #! isn't necessary here since if you absolutely
2719          must execute them you can always say "python <filename>".          must execute them you can always say "python <filename>".
2720    
2721          * Thuban/UI/renderer.py (ScreenRenderer.draw_shape_layer): Remove          * Thuban/UI/renderer.py (ScreenRenderer.draw_shape_layer): Remove
Legend:
Removed from v.1657  
changed lines
  Added in v.2012
[email protected]
 ViewVC Help
Powered by ViewVC 1.1.26