Doc/manual/thuban-manual.xml

<?xml version="1.0" encoding="ISO-8859-1"?>
<!DOCTYPE book
        PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN"
        "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
<!-- $Revision$ -->
<book>
  <bookinfo>
    <title>Thuban Manual</title>
    <author>
      <firstname>Jonathan</firstname><surname>Coles</surname>
    </author>
    <author>
      <firstname>Jan-Oliver</firstname><surname>Wagner</surname>
    </author>
    <copyright>
      <year>2003</year>
      <holder>Intevation GmbH</holder>
    </copyright>
  </bookinfo>

  <chapter><title>Introduction</title>
    <para>
    Thuban is a Free Software Geographic Information Systems (GIS) viewer.
    It is being developed because there is currently no simple interactive
    viewer for geographic information available as Free Software. Thuban is 
    written in Python and C++ and uses the wxWindows library allowing it to 
    run on many different platforms, including GNU/Linux and Windows.
    </para>
    <para>
    GIS viewers are a necessary tool as they allow one to get a visual 
    impression of the positional relationship of the information that may not
    be apparent from simple inspection of the data values themselves. 
    Thuban allows the user to create a session that displays
    geographic data and then explore that data through navigation and
    manipulation of how it is drawn. The results can then be saved or printed.
    </para>
    <para>
    Thuban arranges a session in a hierarchy. A session contains a map which
    consists of layers. Each layer represents one kind of data set. For 
    instance, there may be a layer for roads and another layer for buildings. 
    These layers can either be vector shapes or images.
    </para>

        <section><title>Installation</title>
        <para>
        Thuban is actively supported under Debian Testing (sarge), RedHat 7.2, 
        and Windows 2000. All the necessary files can be found on the 
        <ulink url="http://thuban.intevation.org/download.html">
        Thuban Download site
        </ulink>.
        </para>
        </section>

        <section><title>The Main Window</title>
        <para>
        <screenshot>
        <screeninfo>The Main Window</screeninfo>
        <mediaobject>
        <imageobject> <imagedata fileref="../images/1_2_mainwindow.png" format="PNG"/> </imageobject>
        <imageobject> <imagedata fileref="./images/1_2_mainwindow.ps" format="EPS"/> </imageobject>
        <textobject><phrase>The Main Window</phrase></textobject>
        <caption><para>The Main Window</para></caption>
        </mediaobject>
        </screenshot>
        </para>

        <para>
        The map window shows the current state of the map and is where
        the user can interact with the map using the tools. 
        </para>

        <para>
        The legend on the left displays a list of the current layers and 
        any visible classification groups. In the example, each shape layer 
        has a default classification which specifies how the shapes in each 
        layer are drawn. Layers that are higher in the list appear 
        ``closer'' to the user. The legend can be closed by clicking on the 
        small X in the upper right-hand region of the legend. 
        To open it again, use
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Legend</guimenuitem>
        </menuchoice>.
        The legend is also dockable, which means that it can be detached 
        from the main window by clicking on the small button next to the 
        close button. It can be attached by clicking the same button
        again.
        </para>
        <para>
        The status bar displays different information depending on the
        current context. If the user is selecting an item from the menu
        then the status bar will display a short help message indicating
        what each menu item is for. If the user has a tool selected then
        the position of the cursor on the map is displayed.
        </para>
        <para>
        The tool bar provides quick access to the commonly needed tools.
        By hovering over each button the user can see a short messages
        describing what the tool does. The tools provided are Zoom In, Zoom
        Out, Pan, Full Extent, Full Layer Extent, Full Shape Extent, Indentify,
        and Label. Each of the tools will be explained in further detail later
        in the manual.
        </para>
        </section>

  </chapter>

  <chapter><title>Session Management</title>

        <section><title>Starting a New Session</title>
        <para>
        A new session can be started from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>New Session</guimenuitem>
        </menuchoice>.

        If a session is already loaded and has been modified without
        being saved a prompt will ask if the current session should
        be saved.

        </para>
        </section>

        <section><title>Opening a Session</title>
        <para>
        A session can be opened from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>Open Session</guimenuitem>
        </menuchoice>.

        If a session is already loaded and has been modified without
        being saved a prompt will ask if the current session should
        be saved.
        </para>
        </section>

        <section><title>Saving a Session</title>
        <para>
        A session can be saved from 
        <menuchoice>
        <guimenu>File</guimenu>
        <guimenuitem>Save Session</guimenuitem>
        </menuchoice>.

        </para>
        </section>

        <section><title>The Session Info-Tree</title>
        <para>
                (primarily for developers)
        </para>
        </section>
  </chapter>

  <chapter><title>Map Management</title>
    <para>
    The map consists of a number of layers where each layer represents a
    different type of data set. By interacting with the map the user can
    visually explore the data. 
    </para>

        <section><title>Adding and Removing Layers</title>
        <para>
        There are two types of layers that can use added to a map: shape layers
        and image layers. Shape layers are stored in Shapefile format, a
        standard file format for storing geographic objects. Normally, these
        files have the extension ``.shp''. Associated with
        the object information is a database file which stores attributes for
        each shape in the Shapefile. This file, stored in DB2 format, usually
        has the extension ``.dbf''. Both files should have the same base name.
        For example, if there is a Shapefile named roads.shp there should
        also be a file roads.dbf.
        </para>
        <para>
        Shape layers can be added to the map with
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Layer</guimenuitem>
        </menuchoice>.
        Thuban will load all files with the same base name, so it doesn't
        matter if the Shapefile or database file is selected.
        </para>

        <para>
        Image layers can be added to the map with
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Add Image Layer</guimenuitem>
        </menuchoice>.
        It is important to select a valid image file that has geographic
        data associated with it. This can be embedded in the file itself, 
        or in another file. If geographic information cannot be found, Thuban 
        will report an error.
        </para>
        </section>

        <section><title>Navigation</title>
        <para>
        The map can be explored by using the navigation tools available on 
        the tool bar, or from the 
        <menuchoice><guimenu>Map</guimenu></menuchoice> menu. 
        </para>
        <para>
        The ZoomIn tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_zoomin.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_zoomin.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>ZoomIn Tool</phrase> </textobject>
        </inlinemediaobject>
        can be used to enlarge a region of the map. Clicking once on the map
        will double the magnification and center the map on the point that
        was clicked. Clicking and dragging lets the user select a region
        to be enlarged to fit the window.
        </para>
        <para>
        The ZoomOut tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_zoomout.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_zoomout.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>ZoomOut Tool</phrase> </textobject>
        </inlinemediaobject>
        shrinks the map so that a larger region is visible. A single click
        reduces the magnification by a factor of two. Clicking and dragging
        selects a box such that the current contents of the window will be
        scaled to fit into that box.
        </para>
        <para>
        The Pan tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_pan.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_pan.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Pan Tool</phrase> </textobject>
        </inlinemediaobject>
        allows the user to move the map around by clicking and dragging.
        </para>
        <para>
        The Full Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fullextent.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fullextent.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Full Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the entire map is visible.
        </para>
        <para>
        The Full Layer Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fulllayerextent.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fulllayerextent.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Full Layer Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the currently selected
        layer fits within the window. If no layer is selected this button 
        will be disabled.
        </para>
        <para>
        The Full Shape Extent tool 
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_2_fullshapeextent.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_2_fullshapeextent.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Full Shape Extent Tool</phrase> </textobject>
        </inlinemediaobject>
        rescales the viewable region so that the currently selected
        shape fits within the window. If the shape is a point, it is
        centered and the map is zoomed all the way in. If no shape is 
        selected this button will be disabled.
        </para>
        </section>

        <section><title>Object Identification</title>
        <para>
        Objects on the map can be identified using the Identify tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_3_identify.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_3_identify.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Identify Tool</phrase> </textobject>
        </inlinemediaobject>.
        Clicking on an object selects that object and opens a dialog which 
        shows all the table attributes for that object. Any current selection
        is lost. 
        </para>
        </section>

        <section><title>Object Labelling</title>
        <para>
        Objects can be labelled using the Label tool
        <inlinemediaobject>
        <imageobject> 
        <imagedata fileref="../images/3_3_label.png" format="PNG"/> 
        </imageobject> 
        <imageobject> 
        <imagedata fileref="./images/3_3_label.eps" format="EPS"/> 
        </imageobject>
        <textobject> <phrase>Label Tool</phrase> </textobject>
        </inlinemediaobject>.
        Clicking on an object selects that object and opens a dialog which
        displays the table attributes for that object. An attribute can
        be selected to be the label on the map. Using this tool for an
        object that already has a label will remove the label.
        </para>
        </section>

        <section><title>The Legend</title>
        <para>
        The Legend provides an overview of the layers in the map. Layers
        that appear higher in the legend will appear ``closer'' to the user.
        If a layer supports classification (currently, only shape layers 
        have this feature) then the classification groups will be shown
        below each layer. The properties for each group are also displayed
        with a small graphic. Polygon layers appear as rectangles, lines
        appear as curved lines, and points appear as circles. 
        </para>
        <para>
        Along the top of the legend is a toolbar which allows quick access
        to some of the layer manipulation options under
        <menuchoice> <guimenu>Map</guimenu> </menuchoice>. 

        Double-clicking on a layer or a group of a layer will open the 
        properties dialog for that layer.
        </para>
        </section>

        <section><title>Printing</title>
        <para>
        The map can be printed using 
        <menuchoice>
        <guimenu>Map</guimenu>
        <guimenuitem>Print</guimenuitem>
        </menuchoice>. A standard printing dialog will open allowing the
        user to configure the printer.
        </para>
        </section>
  </chapter>

  <chapter><title>Layer Management</title>
    <para>
    </para>

        <section><title>Types of Layers</title>
        <para>
        There are two types of layers supported by Thuban: shape layers and
        image layers. Shape layers consist of vector based shapes with 
        geo-referenced coordinates. There are three types of supported 
        shapes: polygons, lines, and points. Image layers can be any image
        file format supported by GDAL. The images must have geographic
        coordinate data either embedded within the file, or in a seperate
        file that is in the same directory as the image file. GeoTIFF files 
        work very well with Thuban and were designed specifically to be image 
        layers in GIS programs.
        </para>
        </section>

        <section><title>Properties</title>
        <para>
        Each shape in a shape layer can have various properties which control 
        how it is drawn on the map. Polygons and points can be drawn with an
        outline color and a fill color, while lines have only a line color.
        </para>
        </section>

        <section><title>Visibility</title>
        <para>
        Sometimes it is not desirable to view all layers at the same time.
        Some layers may take a long time to draw and so while navigating
        around the map the user may not want to wait for the map to redraw
        each time the map is changed. Each layer can be independently
        turned on or off using the 
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Show</guimenuitem>
        </menuchoice>
        or
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Hide</guimenuitem>
        </menuchoice> options respectively.
        </para>
        </section>

        <section><title>Sequence</title>
        <para>
        </para>
        </section>

        <section><title>Duplication</title>
        <para>
        Layers and all their properties, including classifications, can
        be duplicated using 
        <menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Duplicate</guimenuitem>
        </menuchoice>. Duplicating a layer is useful if the user wishes
        to model a layer in several different ways. Even though the layers
        overlap by carefully selecting the shape properties it is possible
        to display several pieces of information at once. For example, one
        copy of a roads layer may be classified on a length property and
        another copy may be classified on a type property. if the length
        property was expressed with color and the type property expressed
        with line thickness then it would be possible to view both
        classifications by placing the type property copy over the 
        length property copy.
        </para>
        </section>

  </chapter>

  <chapter><title>Layer Classifications</title>
    <para>
    A layer classification is a way of assigning drawing properties to
    groups of shapes based on attributes stored in the layer's table. 
    Only layer's with shapes can have a classification; image layers
    cannot be classified.
    </para>
    <para>
    A classification consists of a number of groups, with each group
    having a value or range of values to match against, and symbol 
    properties which control how a shape is drawn on the map. The user
    selects which field in the table is used by the classification and
    when the map is drawn the value for that field for each shape is
    compared with each group's value. The properties of the first group 
    to match are used to draw the shape. This allows the user to get a 
    visual impression of not only how the data is laid out but also what 
    kind of data lies where.
    </para>
    <para>
    A layer always has a classification. When a new layer is added to the
    map, a default classification is created with the DEFAULT group. This
    group cannot be removed. Every shape in the layer, regardless of its
    attributes, will match this group. 
    </para>

        <section><title>Editing Classifications</title>
        <para>
        A layer's classification can be modified under the properties dialog 
        (<menuchoice>
        <guimenu>Layer</guimenu>
        <guimenuitem>Properties</guimenuitem>
        </menuchoice>). The layer's classification field can be set to None, 
        which simply assigns a DEFAULT group to the classification. No new 
        groups can be added to the classification if the field is None.
        The user must first select a field to classify on. New groups can
        be added to the classification with the <guibutton>Add</guibutton>
        button. 
        </para>
        <para>
        The order of the groups in the classification is significant
        except for the DEFAULT group, which remains at the top. When shapes
        are matched against groups the matching begins at the first group
        other than the DEFAULT group so that groups higher in the list will 
        be checked first. Matching for a 
        given shape will stop at the first group that matches. The user can
        use <guibutton>Move Up</guibutton> and <guibutton>Move Down</guibutton>
        to change the order of the groups. The DEFAULT group will always 
        match a shape that hasn't matched another group.
        </para>
        <para>
        The Value column of the classification table is the value that will
        be matched when the map is being drawn. The type of data that can
        entered into this field depends on the type of data of the 
        classification field. 
        </para>
        <para>
        If the field is of type Text, anything entered
        into the field is valid. The text will be compared literally to the
        value of the shape attribute, including case sensitivity. 
        If the type is Integer, then any valid integer may be entered. In 
        addition, with special syntax, a range of values can be entered.
        A range from <varname>start</varname> to <varname>end</varname> 
        inclusive is specifed like this: <literal>[start;end]</literal>.
        The exclusive range is specified like this: 
        <literal>]start;end[</literal>. Ranges can include infinity like
        this: <literal>[-oo;oo]</literal>. Field types can also be of type
        Decimal. They represent any rational number and can be used in ranges 
        as well.
        </para>
        </section>

        <section><title>Symbols</title>
        <para>
        Each type of shape has its own type of symbol. Thuban supports three
        types of shapes: polygons, lines, and points. Polygons and points have 
        outline and fill color, while lines have only line color. Each group
        has associated symbol properties. To edit the symbol properties for a 
        group the user can double click on the Symbol column or select a 
        group and click the <guibutton>Edit Symbol</guibutton> button. 
        </para>
        </section>

        <section><title>Generating Classes</title>
        <para>
        Creating a classification by hand can be tedious. 
        Thuban, therefore, provides a means of generating an entire
        classification at once while still giving the user control over
        how it appears. Clicking <guibutton>Generate Class</guibutton>
        opens the <varname>Generate Classification</varname> dialog.
        Under the <varname>Generate</varname> pulldown there are at most
        three different ways to generate classifications: 
        Unique Values, Unique Distribution, and Quantiles. Some options 
        may not be available if they data type for the field does not
        support them. For instance, <varname>Unique Distribution</varname>
        doesn't make sense for a Text field.
        </para>
        <para>
        For every way of generating a classification, a color scheme must
        be selected. Thuban provides several different color schemes that
        affect how the group properties change over the classification.
        It is also possible to create a custom color scheme. Selecting
        this option will display two symbols: the one of the left has the
        properties of the first group and the one on the right has the 
        properties of the last group. Thuban will interpolate between these
        two properties to generate the other groups.
        </para>
        <para>
        The Unique Values option lets the user select specific values that
        appear in the table. Clicking <guibutton>Retrieve From Table</guibutton>
        searches the table for all unique values and displays them in the
        list on the left. Items can be selected and moved to the list on the
        right. Each list can be sorted or reversed for easier searching.
        The classification that is generated will be in the same order as
        the list on the right.
        </para>
        <para>
        The Unique Distribution option creates a user specified number of
        groups of ranges such that each range covers equal intervals. The
        minimum and maximum values can automatically be retrieved from the
        table by clicking <guibutton>Retrieve From Table</guibutton>. The
        stepping is how large each interval is. Adjusting this value will
        automatically recalculate how many groups is appropriate.
        </para>
        <para>
        The Quantiles option generates ranges based on the number items
        in the input set. For example, by specifying 5 groups Thuban will
        generate groups with appropriate ranges such that 20% of the table
        data is in each group. If it is impossible to generate exact
        grouping, Thuban will issue a warning but allow the user to continue.
        </para>
        </section>
  </chapter>

  <chapter><title>Projection Management</title>
    <para>
    </para>
        <section><title>Selecting a Projection</title><para/></section>
        <section><title>Creating a Projection</title><para/></section>
        <section><title>Editing a Projection</title><para/></section>
        <section><title>Importing/Exporting Projections</title><para/></section>
  </chapter>

  <chapter><title>Table Management</title>
    <para>
    </para>
  </chapter>

  <chapter><title>Trouble Shooting</title>
    <para>
    </para>
  </chapter>

  <appendix><title>Supported Data Sources</title>
    <para>
    </para>
  </appendix>

  <appendix><title>Supported Projections</title>
    <para>
    </para>
  </appendix>

</book>
Name	Value
svn:eol-style	native
svn:keywords	Author Date Id Revision