WIP-pyshapelib-bramz/test/support.py

# Copyright (c) 2002, 2003 by Intevation GmbH
# Authors:
# Bernhard Herzog <[email protected]>
#
# This program is free software under the GPL (>=v2)
# Read the file COPYING coming with Thuban for details.

"""
Support classes and function for the test suite
"""

__version__ = "$Revision$"
# $Source$
# $Id$

import os, sys
import unittest

def thuban_dir():
    """Return the directory containing the Thuban package"""
    thisdir = os.path.dirname(__file__)
    return os.path.join(thisdir, os.pardir)

def resource_dir():
    return os.path.join(thuban_dir(), "Resources")

def add_thuban_dir_to_path():
    """Insert the Thuban directory at the beginning of the python path.

    If it's already part of the path, remove later occurrences.
    """
    dir = thuban_dir()
    while 1:
        try:
            sys.path.remove(dir)
        except ValueError:
            break
    sys.path.insert(0, dir)


_initthuban_done = 0
def initthuban():
    """Initialize the interpreter for using Thuban modules
    """
    global _initthuban_done
    if not _initthuban_done:
        add_thuban_dir_to_path()
        import thubaninit
        _initthuban_done = 1

def run_tests():
    """Frontend for unittest.main that prints some additional debug information

    After calling unittest.main, run the garbage collector and print
    uncollected objects. Also print any un-unsubscribed messages.
    """
    try:
        unittest.main()
    finally:
        # This has to be in a finally clause because unittest.main()
        # ends with a sys.exit to make sure that the process exits with
        # an appropriate exit code
        print_additional_summary()

def print_additional_summary():
    """Print some additional summary information after tests have been run"""
    print_garbage_information()
    import xmlsupport
    xmlsupport.print_summary_message()

def print_garbage_information():
    """Print information about things that haven't been cleaned up.

    Run the garbage collector and print uncollected objects. Also print
    any un-unsubscribed messages.
    """
    import gc, Thuban.Lib.connector
    gc.collect()
    if gc.garbage:
        print
        print "There are %d uncollected objects:" % len(gc.garbage)
        print gc.garbage
    Thuban.Lib.connector._the_connector.print_connections()


def create_temp_dir():
    """Create a temporary directory and return its name.

    The temporary directory is always called temp and is created in the
    directory where support module is located.

    If the temp directory already exists, just return the name.
    """
    name = os.path.abspath(os.path.join(os.path.dirname(__file__), "temp"))

    # if the directory already exists, we're done
    if os.path.isdir(name):
        return name

    # create the directory
    os.mkdir(name)
    return name


class FileTestMixin:

    """Mixin class for tests that use files in the temporary directory
    """

    def temp_file_name(self, basename):
        """Return the full name of the file named basename in the temp. dir"""
        return os.path.join(create_temp_dir(), basename)

    def temp_dir(self):
        """Return the name of the directory for the temporary files"""
        return create_temp_dir()


class FileLoadTestCase(unittest.TestCase, FileTestMixin):

    """Base class for test case that test loading files.

    This base class provides some common infrastructure for testing the
    reading of files.

    Each test case should be its own class derived from this one. There
    is one file associated with each class. The contents are defined by
    the file_contents class attribute and its name by the filename
    method.

    Derived classes usually only have to provide appropriate values for
    the file_contents and file_extension class attributes.
    """

    file_contents = None
    file_extension = ""

    def filename(self):
        """Return the name of the test file to use.

        The default implementation simply calls self.volatile_file_name
        with a basename derived from the class name by stripping off a
        leading 'test_' and appending self.file_extension.
        """
        name = self.__class__.__name__
        if name.startswith("test_"):
            name = name[5:]
        return self.temp_file_name(name + self.file_extension)

    def setUp(self):
        """Create the volatile file for the test.

        Write self.contents (which should be a string) to the file named
        by self.filename().
        """
        filename = self.filename()
        file = open(filename, "w")
        file.write(self.file_contents)
        file.close()


class FloatComparisonMixin:

    """
    Mixin class for tests comparing floating point numbers.

    This class provides a few methods for testing floating point
    operations.
    """

    fp_epsilon = 1e-6
    
    def assertFloatEqual(self, test, value):
        """Assert equality of test and value with some tolerance.

        Assert that the absolute difference between test and value is
        less than self.fp_epsilon.
        """
        self.assert_(self.fp_epsilon > abs(test - value),
                     "abs(%g - %g) >= %g" % (test, value, self.fp_epsilon))

    def assertFloatSeqEqual(self, test, value, epsilon = None):
        """Assert equality of the sequences test and value with some tolerance.

        Assert that the absolute difference between each corresponding
        value in test and value is less than the optional parameter
        epsilon. If epsilon is not given use self.fp_epsilon.
        """
        if epsilon is None:
            epsilon = self.fp_epsilon
        for i in range(len(test)):
            self.assert_(epsilon > abs(test[i] - value[i]),
                         "abs(%g - %g) >= %g" % (test[i], value[i], epsilon))


class SubscriberMixin:

    """Mixin class for tests for messages sent through the Connector

    The SubscriberMixin has some methods that can be used as subscribers
    of events that when called append information about the message into
    a list of messages received.

    A derived class should call the clear_messages() method in both its
    setUp and tearDown methods to clear the list of messages received.
    """

    def clear_messages(self):
        """Clear the list of received messages.

        Call this at least in the tests setUp and tearDown methods. It's
        important to do it in tearDown too because otherwise there may
        be cyclic references.
        """
        self.received_messages = []

    def subscribe_no_params(self):
        """Method for subscriptions without parameters.

        Add an empty tuple to the list of received messages.
        """
        self.received_messages.append(())

    def subscribe_with_params(self, *args):
        """Method for subscriptions with parameters.

        Append the tuple will all arguments to this function (except for
        the self argument) to the list of received messages.
        """
        self.received_messages.append(args)

    def check_messages(self, messages):
        """Check whether the messages received match the list messages"""
        self.assertEquals(messages, self.received_messages)

class FloatTestCase(unittest.TestCase):
    """TestCase with methods for testing floating point values"""
                                                                                                                                                        
    fp_epsilon = 1e-6
    fp_inf = float('1e1000')   # FIXME: hack for infinite
                                                                                                                                                        
    def assertFloatEqual(self, first, second, msg=None):
        """Fail if one float is greater than the other + fp_epsilon"""
        if abs(first) == self.fp_inf:
            self.assertEqual(first, second, msg)
        else:
            self.assert_(self.fp_epsilon > abs(first - second), msg)

1	bh	596	# Copyright (c) 2002, 2003 by Intevation GmbH
2	bh	292	# Authors:
3			# Bernhard Herzog <[email protected]>
4			#
5			# This program is free software under the GPL (>=v2)
6			# Read the file COPYING coming with Thuban for details.
7
8			"""
9			Support classes and function for the test suite
10			"""
11
12			__version__ = "$Revision$"
13			# $Source$
14			# $Id$
15
16			import os, sys
17			import unittest
18
19			def thuban_dir():
20			"""Return the directory containing the Thuban package"""
21			thisdir = os.path.dirname(__file__)
22			return os.path.join(thisdir, os.pardir)
23
24	bh	1245	def resource_dir():
25			return os.path.join(thuban_dir(), "Resources")
26	bh	292
27			def add_thuban_dir_to_path():
28			"""Insert the Thuban directory at the beginning of the python path.
29
30			If it's already part of the path, remove later occurrences.
31			"""
32			dir = thuban_dir()
33			while 1:
34			try:
35			sys.path.remove(dir)
36			except ValueError:
37			break
38			sys.path.insert(0, dir)
39
40
41			_initthuban_done = 0
42			def initthuban():
43			"""Initialize the interpreter for using Thuban modules
44			"""
45			global _initthuban_done
46			if not _initthuban_done:
47			add_thuban_dir_to_path()
48			import thubaninit
49			_initthuban_done = 1
50
51	bh	596	def run_tests():
52			"""Frontend for unittest.main that prints some additional debug information
53	bh	292
54	bh	596	After calling unittest.main, run the garbage collector and print
55			uncollected objects. Also print any un-unsubscribed messages.
56			"""
57			try:
58			unittest.main()
59			finally:
60			# This has to be in a finally clause because unittest.main()
61			# ends with a sys.exit to make sure that the process exits with
62			# an appropriate exit code
63	bh	1245	print_additional_summary()
64	bh	292
65	bh	1245	def print_additional_summary():
66			"""Print some additional summary information after tests have been run"""
67			print_garbage_information()
68			import xmlsupport
69			xmlsupport.print_summary_message()
70
71	bh	596	def print_garbage_information():
72			"""Print information about things that haven't been cleaned up.
73
74			Run the garbage collector and print uncollected objects. Also print
75			any un-unsubscribed messages.
76			"""
77			import gc, Thuban.Lib.connector
78			gc.collect()
79			if gc.garbage:
80			print
81			print "There are %d uncollected objects:" % len(gc.garbage)
82			print gc.garbage
83			Thuban.Lib.connector._the_connector.print_connections()
84
85
86	bh	292	def create_temp_dir():
87			"""Create a temporary directory and return its name.
88
89			The temporary directory is always called temp and is created in the
90			directory where support module is located.
91
92			If the temp directory already exists, just return the name.
93			"""
94			name = os.path.abspath(os.path.join(os.path.dirname(__file__), "temp"))
95
96			# if the directory already exists, we're done
97			if os.path.isdir(name):
98			return name
99
100			# create the directory
101			os.mkdir(name)
102			return name
103
104
105			class FileTestMixin:
106
107			"""Mixin class for tests that use files in the temporary directory
108			"""
109
110			def temp_file_name(self, basename):
111			"""Return the full name of the file named basename in the temp. dir"""
112			return os.path.join(create_temp_dir(), basename)
113
114			def temp_dir(self):
115			"""Return the name of the directory for the temporary files"""
116			return create_temp_dir()
117	bh	324
118
119	bh	956
120			class FileLoadTestCase(unittest.TestCase, FileTestMixin):
121
122			"""Base class for test case that test loading files.
123
124			This base class provides some common infrastructure for testing the
125			reading of files.
126
127			Each test case should be its own class derived from this one. There
128			is one file associated with each class. The contents are defined by
129			the file_contents class attribute and its name by the filename
130			method.
131
132			Derived classes usually only have to provide appropriate values for
133			the file_contents and file_extension class attributes.
134			"""
135
136			file_contents = None
137			file_extension = ""
138
139			def filename(self):
140			"""Return the name of the test file to use.
141
142			The default implementation simply calls self.volatile_file_name
143			with a basename derived from the class name by stripping off a
144			leading 'test_' and appending self.file_extension.
145			"""
146			name = self.__class__.__name__
147			if name.startswith("test_"):
148			name = name[5:]
149			return self.temp_file_name(name + self.file_extension)
150
151			def setUp(self):
152			"""Create the volatile file for the test.
153
154			Write self.contents (which should be a string) to the file named
155			by self.filename().
156			"""
157			filename = self.filename()
158			file = open(filename, "w")
159			file.write(self.file_contents)
160			file.close()
161
162
163	bh	324	class FloatComparisonMixin:
164
165			"""
166			Mixin class for tests comparing floating point numbers.
167
168			This class provides a few methods for testing floating point
169			operations.
170			"""
171
172			fp_epsilon = 1e-6
173
174			def assertFloatEqual(self, test, value):
175			"""Assert equality of test and value with some tolerance.
176
177			Assert that the absolute difference between test and value is
178			less than self.fp_epsilon.
179			"""
180	bh	342	self.assert_(self.fp_epsilon > abs(test - value),
181			"abs(%g - %g) >= %g" % (test, value, self.fp_epsilon))
182	bh	324
183			def assertFloatSeqEqual(self, test, value, epsilon = None):
184			"""Assert equality of the sequences test and value with some tolerance.
185
186			Assert that the absolute difference between each corresponding
187			value in test and value is less than the optional parameter
188			epsilon. If epsilon is not given use self.fp_epsilon.
189			"""
190			if epsilon is None:
191			epsilon = self.fp_epsilon
192			for i in range(len(test)):
193	bh	342	self.assert_(epsilon > abs(test[i] - value[i]),
194			"abs(%g - %g) >= %g" % (test[i], value[i], epsilon))
195	bh	324
196
197			class SubscriberMixin:
198
199			"""Mixin class for tests for messages sent through the Connector
200
201			The SubscriberMixin has some methods that can be used as subscribers
202			of events that when called append information about the message into
203			a list of messages received.
204
205			A derived class should call the clear_messages() method in both its
206			setUp and tearDown methods to clear the list of messages received.
207			"""
208
209			def clear_messages(self):
210			"""Clear the list of received messages.
211
212			Call this at least in the tests setUp and tearDown methods. It's
213			important to do it in tearDown too because otherwise there may
214			be cyclic references.
215			"""
216			self.received_messages = []
217
218			def subscribe_no_params(self):
219			"""Method for subscriptions without parameters.
220
221			Add an empty tuple to the list of received messages.
222			"""
223			self.received_messages.append(())
224
225			def subscribe_with_params(self, *args):
226			"""Method for subscriptions with parameters.
227
228			Append the tuple will all arguments to this function (except for
229			the self argument) to the list of received messages.
230			"""
231			self.received_messages.append(args)
232
233			def check_messages(self, messages):
234			"""Check whether the messages received match the list messages"""
235			self.assertEquals(messages, self.received_messages)
236	jonathan	904
237			class FloatTestCase(unittest.TestCase):
238			"""TestCase with methods for testing floating point values"""
239
240			fp_epsilon = 1e-6
241			fp_inf = float('1e1000') # FIXME: hack for infinite
242
243			def assertFloatEqual(self, first, second, msg=None):
244			"""Fail if one float is greater than the other + fp_epsilon"""
245			if abs(first) == self.fp_inf:
246			self.assertEqual(first, second, msg)
247			else:
248			self.assert_(self.fp_epsilon > abs(first - second), msg)
249
Name	Value
svn:eol-style	native
svn:keywords	Author Date Id Revision