Annotation of /branches/greater-ms3/thuban/ChangeLog

2001-09-06  Bernhard Herzog  <[email protected]>

        * Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Pass the
        layer to the tableview dialog.

        * Thuban/UI/tableview.py: Add some doc-strings
        (TableGrid): 
        (TableGrid.OnRangeSelect):
        (TableGrid.OnSelectCell):
        (TableFrame.__init__):
        (TableFrame.row_selected):
        Selecting rows in the grid view now updates the selected shapes
        through the TableFrame. To achieve this we derive TableGrid from
        Publisher and introduce the message type ROW_SELECTED which the
        TableFrame subscribes to and which is issued by OnRangeSelect and
        OnSelectCell

        (DataTable.SelectRow): Removed because it's no longer needed in
        the row/shape selection scheme

        * Thuban/UI/dialogs.py: New file implementing common classes for
        dialogs

        * Thuban/UI/tableview.py (TableGrid.__init__): Don't subscribe to
        the SELECTED_SHAPE message anymore. This is now handled by the
        parent.
        (TableGrid.select_shape): Only update the selection if the shape
        is not None.
        (TableFrame): Inherit from the new NonModalDialog class.
        (TableFrame.__init__, TableFrame.select_shape): Handle the
        SELECT_SHAPE message.
        (TableFrame.OnClose): Extend the inherited method to unsubscribe
        SELECT_SHAPE

        * Thuban/UI/mainwindow.py (MainWindow.init_dialogs):
        (MainWindow.add_dialog):
        (MainWindow.dialog_open):
        (MainWindow.remove_dialog):
        (MainWindow.get_open_dialog): New methods to maintain a dictionary
        of opened non-modal dialogs.

        (MainWindow.__init__): Initialize the new non-modal dictionary
        management code
        (MainWindow.LayerShowTable): maintain separate dialogs for each
        table using the non-modal dialog management code to only open a
        view once for each table.

        (MainWindow.IdentifyTool):
        (MainWindow.__init__):
        (MainWindow.identify_view_on_demand): Don't open the identify view
        in IdentifyTool anymore. This will be done automatically by the
        new method identify_view_on_demand which handles the
        SELECTED_SHAPE message so that the identify view will be opened on
        demand

        * Thuban/UI/identifyview.py (IdentifyListCtrl.__init__): Remove
        the interactor argument. The SELECTED_SHAPE message is now handled
        by the parent.
        (IdentifyView.__init__): Add the interactor argument so that we
        can handle the SELECTED_SHAPE message here
        (IdentifyView.selected_shape): New method to handle the
        SELECTED_SHAPE messages

        * Thuban/UI/identifyview.py (IdentifyView): Derive from the new
        NonModalDialog class
        (IdentifyView.OnClose): Extend the inherited version to
        unsubscribe SELECT_SHAPE

        * Thuban/Model/session.py (Session.UnsetModified): Remove debug prints

2001-09-05  Bernhard Herzog  <[email protected]>

        * Thuban/UI/view.py (MapCanvas.__init__): New argument, interactor.
        
        * Thuban/UI/mainwindow.py (MainWindow.__init__): New argument
        interactor to pass through to the MapCanvas
        
        * Thuban/UI/application.py (ThubanApplication.OnInit): Use the new
        argument to the MainWindow constructor to get rid of the ugly hack
        that made main.app available early just so that the mapcanvas
        could access the interactor object.

2001-09-04  Bernhard Herzog  <[email protected]>

        * Thuban/UI/mainwindow.py (MainWindow.RunMessageBox): New method
        that runs a modal message box
        (MainWindow.OnClose): Use the new method
        (MainWindow.RemoveLayer): Just do nothing in case no layer is
        selected. The command should be grayed out anyway, so there's no
        need to pop up a message box.
        (MainWindow.AddLayer): Pop up a message box with an error message
        if the shape file can't be opened

        * Thuban/Model/layer.py (Layer.__init__): Open the shapefile
        immediately. This will cause an exception in case the file can't
        be opened and we can display an appropriate message.

        * MANIFEST.in: Add extensions/pyprojection/LICENSE

        * setup.py (thuban_bdist_rpm): New class implementing a Thuban
        specific bdist_rpm command.

        * Thuban/UI/main.py: Catch ImportError exceptions when importing
        the locale module because it may not be available on some
        installations.

        * extensions/pyprojection/LICENSE: Copy of the license text in
        Projection.i. Having it in a separate file makes it easier to
        refer to license text in e.g. RPMs

2001-09-03  Bernhard Herzog  <[email protected]>

        * setup.py: use wx-config instead of wxgtk-config because it's
        more generic

        * setup.py (ThubanInstall.get_outputs): Add the symlink in
        <prefix>/bin to the outputs
        (ThubanInstall.link_file): New method to link files. We need this
        because the standard copy_files refuses to link non-existing
        files.
        (ThubanInstall.run): Remove the leading install root from the
        script filename if an install root was specified and use the new
        link_file method
        
        * Thuban/UI/mainwindow.py (MainWindow.AddLayer): Fit the map to
        the window when the first layer is added to the map.

        * setup.py (ThubanInstall.run): Honor the build root (self.root)
        when linking thuban.py to <prefix>/bin

2001-08-31  Bernhard Herzog  <[email protected]>

        * setup.py: In the setup call, the install parameters shouldn't
        have trailing slashes because distutils on non-posix platforms
        doesn't like that. The same applies to other directories like
        "Resources/Bitmaps"

        In the configuration section for nt, move the wxWindows directory
        optins into the part clearly marked as editable.

        (InstallLocal.initialize_options):
        (InstallLocal.user_options): remove the currently unused debug
        flag
        (thuban_build_py.find_all_modules): Add this method so that it
        works for our case of having packages and modules in one
        distribution as well.
        (ThubanInstall.initialize_options):
        (ThubanInstall.finalize_options):
        (ThubanInstall.user_options):
        (ThubanInstall.boolean_options): Add new options, do-symlink and
        extra files. Since these are the first ThubanInstall specific
        options, override user_options and boolean_options
        (ThubanInstall.run): Honor the new do-symlink and extra-files
        options.
        (ThubanInstall.get_outputs): Add to override the base-class's
        version and add the extra-files to the outputs
        (bdist_inno): New class for windows distributions with Inno Setup
        (InnoIconItem): Helper class for bdist_inno
        (thuban_bdist_inno): Thuban specific version of bdist_inno. Added
        this together with the appropriate parameters, to the setup call.
        
        * setup.cfg (bdist_inno): added new section for the inno setup
        installer

        * Thuban/UI/tree.py (myTreeCtrlPanel.__init__): New inst var
        changing_selection to avoid recursive selection events when
        modifying the selection in response to a selection event.
        (myTreeCtrlPanel.normalize_selection): Set the new inst var when
        changing the tree's selection.
        (myTreeCtrlPanel.OnSelChanged): Only normalize the selection when
        we're not being called indirectly from normalize_selection.

        * Thuban/UI/mainwindow.py (MainWindow.update_command_ui): Call
        event.Check only if the command is actuall checkable.
        (MainWindow.__init__): Call the toolbar's Realize method to make
        sure that the items are actually shown

2001-08-28  Bernhard Herzog  <[email protected]>

        * setup.py: Fix some doc strings

        * ChangeLog: started

1	bh	32	2001-09-06 Bernhard Herzog <[email protected]>
2
3	bh	35	* Thuban/UI/mainwindow.py (MainWindow.LayerShowTable): Pass the
4			layer to the tableview dialog.
5
6			* Thuban/UI/tableview.py: Add some doc-strings
7			(TableGrid):
8			(TableGrid.OnRangeSelect):
9			(TableGrid.OnSelectCell):
10			(TableFrame.__init__):
11			(TableFrame.row_selected):
12			Selecting rows in the grid view now updates the selected shapes
13			through the TableFrame. To achieve this we derive TableGrid from
14			Publisher and introduce the message type ROW_SELECTED which the
15			TableFrame subscribes to and which is issued by OnRangeSelect and
16			OnSelectCell
17
18			(DataTable.SelectRow): Removed because it's no longer needed in
19			the row/shape selection scheme
20
21	bh	32	* Thuban/UI/dialogs.py: New file implementing common classes for
22			dialogs
23
24			* Thuban/UI/tableview.py (TableGrid.__init__): Don't subscribe to
25			the SELECTED_SHAPE message anymore. This is now handled by the
26			parent.
27			(TableGrid.select_shape): Only update the selection if the shape
28			is not None.
29			(TableFrame): Inherit from the new NonModalDialog class.
30			(TableFrame.__init__, TableFrame.select_shape): Handle the
31			SELECT_SHAPE message.
32			(TableFrame.OnClose): Extend the inherited method to unsubscribe
33			SELECT_SHAPE
34
35			* Thuban/UI/mainwindow.py (MainWindow.init_dialogs):
36			(MainWindow.add_dialog):
37			(MainWindow.dialog_open):
38			(MainWindow.remove_dialog):
39			(MainWindow.get_open_dialog): New methods to maintain a dictionary
40			of opened non-modal dialogs.
41
42			(MainWindow.__init__): Initialize the new non-modal dictionary
43			management code
44			(MainWindow.LayerShowTable): maintain separate dialogs for each
45			table using the non-modal dialog management code to only open a
46			view once for each table.
47
48			(MainWindow.IdentifyTool):
49			(MainWindow.__init__):
50			(MainWindow.identify_view_on_demand): Don't open the identify view
51			in IdentifyTool anymore. This will be done automatically by the
52			new method identify_view_on_demand which handles the
53			SELECTED_SHAPE message so that the identify view will be opened on
54			demand
55
56			* Thuban/UI/identifyview.py (IdentifyListCtrl.__init__): Remove
57			the interactor argument. The SELECTED_SHAPE message is now handled
58			by the parent.
59			(IdentifyView.__init__): Add the interactor argument so that we
60			can handle the SELECTED_SHAPE message here
61			(IdentifyView.selected_shape): New method to handle the
62			SELECTED_SHAPE messages
63
64			* Thuban/UI/identifyview.py (IdentifyView): Derive from the new
65			NonModalDialog class
66			(IdentifyView.OnClose): Extend the inherited version to
67			unsubscribe SELECT_SHAPE
68
69			* Thuban/Model/session.py (Session.UnsetModified): Remove debug prints
70
71	bh	26	2001-09-05 Bernhard Herzog <[email protected]>
72
73			* Thuban/UI/view.py (MapCanvas.__init__): New argument, interactor.
74
75			* Thuban/UI/mainwindow.py (MainWindow.__init__): New argument
76			interactor to pass through to the MapCanvas
77
78			* Thuban/UI/application.py (ThubanApplication.OnInit): Use the new
79			argument to the MainWindow constructor to get rid of the ugly hack
80			that made main.app available early just so that the mapcanvas
81			could access the interactor object.
82
83	bh	19	2001-09-04 Bernhard Herzog <[email protected]>
84
85	bh	22	* Thuban/UI/mainwindow.py (MainWindow.RunMessageBox): New method
86			that runs a modal message box
87			(MainWindow.OnClose): Use the new method
88			(MainWindow.RemoveLayer): Just do nothing in case no layer is
89			selected. The command should be grayed out anyway, so there's no
90			need to pop up a message box.
91			(MainWindow.AddLayer): Pop up a message box with an error message
92			if the shape file can't be opened
93
94			* Thuban/Model/layer.py (Layer.__init__): Open the shapefile
95			immediately. This will cause an exception in case the file can't
96			be opened and we can display an appropriate message.
97
98	bh	19	* MANIFEST.in: Add extensions/pyprojection/LICENSE
99
100			* setup.py (thuban_bdist_rpm): New class implementing a Thuban
101			specific bdist_rpm command.
102
103			* Thuban/UI/main.py: Catch ImportError exceptions when importing
104			the locale module because it may not be available on some
105			installations.
106
107			* extensions/pyprojection/LICENSE: Copy of the license text in
108			Projection.i. Having it in a separate file makes it easier to
109			refer to license text in e.g. RPMs
110
111	bh	18	2001-09-03 Bernhard Herzog <[email protected]>
112
113	bh	19	* setup.py: use wx-config instead of wxgtk-config because it's
114			more generic
115
116			* setup.py (ThubanInstall.get_outputs): Add the symlink in
117			<prefix>/bin to the outputs
118			(ThubanInstall.link_file): New method to link files. We need this
119			because the standard copy_files refuses to link non-existing
120			files.
121			(ThubanInstall.run): Remove the leading install root from the
122			script filename if an install root was specified and use the new
123			link_file method
124
125	bh	18	* Thuban/UI/mainwindow.py (MainWindow.AddLayer): Fit the map to
126			the window when the first layer is added to the map.
127
128			* setup.py (ThubanInstall.run): Honor the build root (self.root)
129			when linking thuban.py to <prefix>/bin
130
131	bh	16	2001-08-31 Bernhard Herzog <[email protected]>
132
133			* setup.py: In the setup call, the install parameters shouldn't
134			have trailing slashes because distutils on non-posix platforms
135			doesn't like that. The same applies to other directories like
136			"Resources/Bitmaps"
137
138			In the configuration section for nt, move the wxWindows directory
139			optins into the part clearly marked as editable.
140
141			(InstallLocal.initialize_options):
142			(InstallLocal.user_options): remove the currently unused debug
143			flag
144			(thuban_build_py.find_all_modules): Add this method so that it
145			works for our case of having packages and modules in one
146			distribution as well.
147			(ThubanInstall.initialize_options):
148			(ThubanInstall.finalize_options):
149			(ThubanInstall.user_options):
150			(ThubanInstall.boolean_options): Add new options, do-symlink and
151			extra files. Since these are the first ThubanInstall specific
152			options, override user_options and boolean_options
153			(ThubanInstall.run): Honor the new do-symlink and extra-files
154			options.
155			(ThubanInstall.get_outputs): Add to override the base-class's
156			version and add the extra-files to the outputs
157			(bdist_inno): New class for windows distributions with Inno Setup
158			(InnoIconItem): Helper class for bdist_inno
159			(thuban_bdist_inno): Thuban specific version of bdist_inno. Added
160			this together with the appropriate parameters, to the setup call.
161
162			* setup.cfg (bdist_inno): added new section for the inno setup
163			installer
164
165			* Thuban/UI/tree.py (myTreeCtrlPanel.__init__): New inst var
166			changing_selection to avoid recursive selection events when
167			modifying the selection in response to a selection event.
168			(myTreeCtrlPanel.normalize_selection): Set the new inst var when
169			changing the tree's selection.
170			(myTreeCtrlPanel.OnSelChanged): Only normalize the selection when
171			we're not being called indirectly from normalize_selection.
172
173			* Thuban/UI/mainwindow.py (MainWindow.update_command_ui): Call
174			event.Check only if the command is actuall checkable.
175			(MainWindow.__init__): Call the toolbar's Realize method to make
176			sure that the items are actually shown
177
178	bh	7	2001-08-28 Bernhard Herzog <[email protected]>
179
180	bh	9	* setup.py: Fix some doc strings
181
182	bh	7	* ChangeLog: started
183
Name	Value
svn:eol-style	native
svn:keywords	Author Date Id Revision