Annotation of /trunk/Src/ChangeLog

2006-08-11  Timo Schulz  <[email protected]>

        * wptGPGMEWrapper.cpp (importFromFile): New.
        (importFromClipboard): New.
        (importGetResult): New.
        * wptKeyManager.cpp (km_file_import): Use gpgme wrapper.
        (km_clip_import): Ditto.
        * wptKeyEdit.cpp (addCardKey): New.
        * wptKeyEditCB.cpp (cmd_addcardkey_handler): New.
        * wptCardEdit.cpp (get_str_timestamp): Use locale date format.
        * wptCardDlg.cpp (card_edit_dlg_proc): Began to localize dialog.
        * wptKeyCache.cpp (key_divert_to_card): Adjusted for 'addcardkey'.
        
2006-08-10  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_verify_pasted_detsig): '=' should be
        '=='.
        * wptGPGME.cpp (sigsum_to_index): Correctly handle expired 
        keys and signatures.
        (get_gpg_sigstat): Adjusted code.
        * wptCardDlg.cpp (card_changepin_dlg_proc): Cleanups.
        (gpg_card_load): Improved card detection code.
        * wptFirstRunDlg.cpp (first_run_dlg_proc): Allow to generate
        a key on a card. Suggested by Achim.
        * wptUtil.cpp (check_email_address): Add sanity check for
        the length.
        * WinPT.cpp (WinMain): Handle cardgen request.
        
2006-08-04  Timo Schulz  <[email protected]>

        * wptKeysignDlg.cpp (display_keyinfo): Skip revoked user IDs.
        * wptKeyManagerDlg.cpp (reload_keylist): Use updated ptr.
        * wptKeyCache.cpp (gpg_keycache_delete_key): Correct handling
        for the situation that the last key in the cache is deleted.
        * wptFileManagerDlg.cpp (update_ui_items): Fix file name
        detection.
        
2006-08-02  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (verify_get_clip_info): Fix problem
        with static data.
        (clip_decrypt_dlg_proc): Prefix keyid with 0x.
        (get_key_userid): Fix problem when key was not found.
        * wptClipVerifyDlg.cpp (fetch_key_from_keyserver): Correct
        fingerprint to short keyid conversion.
        * wptVerifyList.cpp (verlist_set_additional_info): Handle bad
        sigs.
        * wptKeyManagerDlg.cpp (update_status_bar): Faster update code.
        
        
2006-08-01  Timo Schulz  <[email protected]>

        * wptGPG.cpp (get_last_gnupg_access): Enhanced.
        (gnupg_display_error): Removed unused code.
        * wptPassphraseCB.cpp (parse_gpg_description): Text output
        is now more human readable.
        * wptKeyManager.cpp (km_refresh_from_keyserver): Return an
        error code in all cases.
        
2006-07-31  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (clip_gpg_dlg): Merge in the current window
        handling code.
        * wptCurrWnd.cpp (wnd_msg_em_set_pos): Reset pos to 0, not 1.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Disable sorting
        for list view controls.
        
2006-07-30  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Change menu style.
        * wptKeySignDlg.cpp (keysign_dlg_proc): List all user IDs.
        (display_keyinfo): New.
        * wptKeySigDlg.cpp (init_datepicker_from_time): New.
        (keysig_dlg_proc): List creation time.
        * wptKeyManager.cpp (km_send_to_mail_recipient): Fix file
        handling.
        
2006-07-28  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (lv_del_confirmed_keys): New.
        * wptKeyEditDlgs.cpp (keyedit_addsubkey_dlg_proc): Automatically
        adjust key size.
        * wptKeygenDlg.cpp (keygend_dlg_proc): Likewise.
        
2006-07-25  Timo Schulz  <[email protected]>

        Applied spelling corrections from Anthony Bryan.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Changed design.
        * wptKeygenDlg.cpp (backup_keyrings): Change default keyring.
        
2006-07-22  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (elgamal_warn_dlg_proc): Properly handle
        utf8 encoded user ids.
        (winpt_main_proc): Cleanups.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Allow to copy
        email address to the clipboard.
        
2006-07-15  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Compare PTD and WinPT version to avoid
        any compatibility problems.
        * wptW32API.cpp (get_file_version): Cleanups.
        
2006-07-10  Timo Schulz  <[email protected]>

        * wptUtil.cpp (check_file_name): New.
        * wptKeyRevokeDlg.cpp (mk_cert_name): Avoid illegal chars.
        (key_revoke_dlg_proc): Likewise.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Corrected file handling.
        * wptImportList.cpp (implist_load): Likewise.
        * wptFileSaveDlg.cpp (file_save_dlg_proc): Likewise.
        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Hide dialog item.
        
2006-07-05  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Change menu texts.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): More lightweight
        with a menu instead of dozen of buttons.
        
2006-07-01  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_sort): Rewritten.
        (fm_build): Modify param type. Change all callers.
        (fm_cmp_cb): Adjusted for the new code.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Minor changes and model
        for the list view.
        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Use info
        context and model for the list view.
        (update_status_bar): Fix calculation of the size of the
        selected files.
        * wptProgressDlg.cpp (wait_for_progress_cb): Changed semantic
        and return type.
        
2006-06-28  Timo Schulz  <[email protected]>

        * wptGPGPrefsDlg.cpp (load_gpg4win_values): Fix control logic
        and memory leak.
        * wptListView.cpp (listview_find_substr): New.
        (listview_sort_items): Use symbolic ids.
        * wptKeyManager.cpp (km_find_key): Allow substring search.
        
2006-06-27  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Also call viewer
        when no sig has been found (if requested).
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Use a button to
        quote instead of the check box. Cleanups.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Correct
        sorting problem and wrong icon display.
        * wptListView.cpp (listview_sort_items): Correct code for
        checkbox based lists.
        * wptKeylist.cpp (keylist_build): Add sorting icons.
        * wptKeyEditDlgs.cpp (create_header_tooltip): New.
        
2006-06-24  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Localize missing string.
        * wptKeyEditDlgs.cpp (do_add_new_subkey): Better fpr to keyid
        conversion.
        (subkey_list_init): Simplified.
        
2006-06-22  Timo Schulz  <[email protected]>

        * WinPT-en.rc: Include versioninfo.rc to generate
        the version info automatically.
        
2006-06-19  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (verify_get_clip_info): Improved
        format of the sig info text.
        * wptKeyserver.cpp (check_hkp_response): Invert error logic.
        * wptKeyserverDlg.cpp (keyserver_recv_key): Corrected error
        handling.
        * wptPassphraseDlg.cpp (request_key_passphrase): Return
        utf8 encoded passphrase.
        
2006-06-18  Timo Schulz  <[email protected]>

        * wptKeygenDlg.cpp (keygen_dlg_proc): Fix typo.
        * wptClipDecryptDlg.cpp (verify_get_clip_info): New.
        (verify_get_key_ownertrust): New.
        (clip_decrypt_dlg_proc): New argument. Change all callers.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Handle the case
        that the dialog was called with a param.
        * wptMainProc.cpp (winpt_main_proc): Wait for thread in
        case of dbl-click.
        
2006-06-16  Timo Schulz  <[email protected]>

        * wptProgressDlg.cpp (wait_for_progress_cb): New.
        * wptMainProc.cpp (winpt_main_proc): Use this function
        to disallow to access the cache during synchronisation.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Likewise.
        * wptKeyserver.cpp (check_hkp_response): Improved text
        extraction.
        (parse_keyserver_error): New.
        * wptPassphraseDlg.cpp (request_passphrase): Support utf8
        encoding.
        * wptKeyEditDlgs.cpp (keyedit_change_passwd): Warn if passhrase
        needs to be utf8 encoded but still allow it.
        * wptPassphraseCBDlg.cpp (passphrase_callback_proc): Utf8 support.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Likewise.
        * wptKeyRevokeDlg.cpp (keyrevoke_dlg_proc): Likewise.
        
2006-06-15  Timo Schulz  <[email protected]>

        * wptVerList.cpp (verlist_build): Use icons.
        (verlist_add_sig): Set image number according to sig state.
        
2006-06-14  Timo Schulz  <[email protected]>

        * wptAboutDlgs.cpp (about_winpt_dlg_proc): Translate
        authors string here. Noted by Eduardo.
        * wptSymEnc.cpp (gpg_clip_sym_encrypt): Check all return codes.
        
2006-06-09  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (do_add_new_subkey): Properly handle
        RSA_E and RSA_S.
        * wptFileManager.cpp (fm_sym_encrypt): Better dialog title.
        
2006-06-08  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (parse_keyserver_url): Handle special case.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Show photo if possible.
        (showphoto_dlg_proc): New.
        * wptKeyManagerDlg.cpp (restore_window_size): New.
        (keymanager_dlg_proc): Restore original window size on startup.
        (copy_key_info): Allow to copy multiple key items.
        
2006-06-06  Timo Schulz  <[email protected]>

        * wptKeyEditCB.cpp (cmd_sign_handler): Return 0 by default
        if no expire date were given.
        
2006-06-05  Timo Schulz  <[email protected]>

        * wptPassphraseDlg.cpp (request_passphrase): Release mem
        in case of errors.
        (request_key_passphrase): New.
        (set_passphrase_hint): New.
        * wptKeyEditDlgs.cpp (do_editkey_sign_userid): Show passphrase
        hint. Suggested by vedaal.
        
2006-06-03  Timo Schulz  <[email protected]>

        * wptPINDlg.cpp (pin_dlg_proc): Remove static var.
        * wptClipEncryptDlg.cpp (show_invalid_recipients): Handle
        the case that 'encrypt-to' points to a non-existing item.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): Do not close
        the dialog if an error occurred.
        * wptKeygenDlg.cpp (keygn_dlg_proc): Check expirate date.
        * wptKeyEditDlgs.cpp (keyedit_adduid_dlg_proc): Release mem
        in case of errors.
        * wptKeyserverDlg.cpp (check_pattern): Improved code.
        (keyserver_dlg_proc): All comparisons are case insentensive.
        * wptKeyserver.cpp (parse_uid_record): utf8 decode user id.
        
2006-06-02  Timo Schulz  <[email protected]>

        * wptKeygenDlg.cpp (keygen_dlg_proc): Forgot to apply patch.
        
2006-06-01  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (check_URL): change semantic.
        (skip_type_prefix): Use check_URL().
        * wptGPG.cpp (gnupg_backup_keyrings): New argument to
        include secret keyring backups. Change all callers.
        * wptRegistry.cpp (get_reg_winpt_prefs): Support new option.
        (set_reg_winpt_prefs): Likewise.
        * wptPreferencesDlg.cpp (on_init_dialog): Adjust the code.
        
2006-05-29  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (keyserver_set_default): Also set default port.

2006-05-27  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (keyedit_change_passwd): Handle empty
        passphrase requests.
        * wptClipDecryptDlg.cpp (verify_show_signature_state): Modified
        for global use.
        * wptFileManager.cpp (fm_decrypt): Use it here.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Simplified.
        
2006-05-25  Timo Schulz  <[email protected]>

        * wptGPGUtil.cpp (gpg_rebuild_cache): Return error code.
        * wptGPGME.cpp (winpt_get_seckey): Fix off-by-one bug.
        * wptVerifyList.cpp (verlist_build): New argument type.
        Change all callers.
        (verlist_set_info_control): New.
        (verlist_set_additional_info): New.
        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Adjust code.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Likewise.
        * wptFileCBS.cpp (read_cb, write_cb): Add logging.
        
2006-05-23  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (do_add_new_userid): Fix re-introduced
        problem.
        (keyedit_main_dlg_proc): Popup menu for the user ID list
        with common commands.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Automatically
        disable search for ldap servers.
        Use subkeys.pgp.net by default when no server was selected.

2006-05-22  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (set_reg_winpt_prefs, get_reg_winpt_prefs):
        Support for the new 'default ext' value.
        * wptPreferencesDlg.cpp (on_init_dialog): Likewise.
        (prefs_dlg_proc): Likewise.
        * wptFileManager.cpp (file_get_extension): Likewise.
        (get_output_file): Likewise.
        (fm_export): Likewise.
        
2006-05-20  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (keyprops_load_photo): avoid expensive
        process call when no photo is available.
        (keyprops_dlg_proc): avoid static data.
        * wptFileManager.cpp (fm_add_sig_stat): Free memory in case
        of on demand key requests.
        (show_verify_result): Likewise.
        (secret_key_available): Likewise.
        (fm_decrypt, fm_sign): Handle the new on demand key request
        mode and free all memory.
        
2006-05-15  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (userid_list_init): Forgot to
        apply patch. Thanks to vedaal.
        
2006-05-14  Timo Schulz  <[email protected]>

        * wptKeyCache.cpp (gpg_keycache_update_attr): Parse
        preferred keyserver URL.
        * wptHTTP.cpp (extractHostInfo): Fix segv.
        * wptGPGUtil.cpp (gpg_find_key_subpacket): Ignore default
        gpg.conf.
        * wptKeyserverSearchDlg.cpp (search_hkp_keys): Do not
        assume an existing user id.
        * wptPassphraseCB.cpp (passphrase_cb): Automatic cancel
        if no passphrase is available.

2006-05-13  Timo Schulz  <[email protected]>

        * wpMainProc.cpp (secret_key_available): Move it...
        * wptGPGME.cpp: ..to this file.
        (check_ultimate_trusted_key): Handle the case there
        is no secret key available.
        * wptFileManagerDlg.cpp (update_ui_items): Improved.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Deactive
        some functions when no secret key is available.
        * wptKeyserverSearchDlg.cpp (search_hkp_keys): Adjust
        code and also display pubkey algorithm.
        * wptKeyserver.cpp (safe_alloc): New.
        (count_keys_in_response): New.
        (parse_pub_record): New.
        (parse_uid_record): New.
        (kserver_release_key): New.
        (kserver_search_begin, kserver_search_next_key):
        Adjust for the machine readable output. Removed old code.
        (parse_keyserver_url): New.
        * wptUtil.cpp (substr): New.
        * wptKeyManager.cpp (km_refresh_one_key): Properly 
        parse the keyserver URL.
        
2006-05-11  Timo Schulz  <[email protected]>

        * wptPassphraseCB.cpp (release_gpg_recipients): New.
        (release_gpg_recipients): Use it here.
        * wptFileManager.cpp (fm_decrypt): List all recipients.
        Thanks to vedaal.
        * wptGPG.cpp (extract_keyid): New.
        (get_gnupg_default_key): Use it here.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Allow to verify
        one-pass-sigs again.
        
2006-05-09  Timo Schulz  <[email protected]>

        * wptKeyRevokersDlg.cpp (revokelist_build): Store key ptr.
        * wptClipSignDlg.cpp (gpg_clip_sign): Improve error handling.
        * wptKeysigDlg.cpp (sigprops_dlg_proc): Correct expire date.
        
2006-05-07  Timo Schulz  <[email protected]>

        * wptKeyserverDlg.cpp (hkp_err_box): Improved.
        * wptKeyserver.cpp (wsock_strerror): Likewise.
        * wptKeygenCBDlg.cpp (keygen_cb_dlg_destroy): New param.
        Change all callers.
        * wptKeysigDlg.cpp (do_load_keyprops): Correct key update
        problem.
        
2006-05-06  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (reload_keycache): Use pre-defined
        sorting order if available.
        * wptKeyPropsDlg.cpp (key_props_dlg_proc): Use 0x prefix
        for the key ID.
        (get_pref_cipher): Differ between the AES algorithm IDs.
        (key_is_valid): New.
        * wptKeyserverDlg.cpp (check_pattern): Simplified.
        
2006-05-03  Timo Schulz  <[email protected]>

        * wptKeyCache.cpp (keycache_prepare2): Fix possible segv.
        Thanks to Mathias.
        
2006-05-02  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Use a
        caption for the radio button group.
        * wptKeyserverDlg.cpp (keyserver_recv_key): Use new code.
        * wptKeyserver.cpp (kserver_recvkey, finger_recvkey,
        ldap_recvkey): Avoid fixed buffers.
        (do_spawn_ldap_helper): New.
        (ldap_recvkey): Factor out code into helper function.
        * wptPassphraseCBDlg.cpp (passphrase_callback_proc):
        Increase width of the list box to make sure even large
        user IDs will be completly displayed.
        
2006-05-01  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Check if the user has admin privileges.
        * wptW32API.cpp (user_is_admin): New.
        * wptKeysigDlg.cpp (sigprops_dlg_proc): Cosmetical changes.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Use timer
        to re-activate the window again.
        * wptKeylist.cpp (get_key_trust2): Differ between "full"
        and "ultimate".
        * wptKeyCache.cpp (keycache_prepare2): Primary user-id
        has now highest priority.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Use new utf8
        system.
        
2006-04-30  Timo Schulz  <[email protected]>

        * wptKeyCache.cpp (gpg_keycache_release): Release revoker
        list if needed.
        * wptKeyRevokersDlg.cpp (key_get_revokers): New.
        (key_revokers_dlg_proc): Expect winpt_key_t. Change all callers.
        * wptKeyEditDlgs.cpp (check_desig_rev): New.
        (do_editkey_minimize): New.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): Support to
        generate a revoc cert as a desig revoker.
        
2006-04-29  Timo Schulz  <[email protected]>

        * wptVerifyList.cpp (verlist_build): Adjusted code for new
        list view interface.
        * wptSigList.cpp (siglist_build): Likewise.
        * wptKeyEditDlgs.cpp (showpref_dlg_proc): Correct code
        to display the preferences of the selected UID. Thanks to Mathias.
        * wptKeyCacheDlg.cpp (keycache_dlg_proc): Return 1 in case
        of an error.
        * wptKeyCache.cpp (gpg_keycache_update_key): Always update
        the utf8 decoded uid list.
        * wptImportList.cpp (decode_userid): Do utf8 decoding here.
        * wptListView.cpp (listview_new): New param for HWND handle.
        Change all callers.
        * wptFileManager.cpp (fm_add_sig_stat): Use utf8 decoding.
        * wptGPGUtil.cpp (gpg_revoke_cert): Support --desig-revoker.
        * wptClipVerifyDlg.cpp (wptClipVerifyDlg.cpp): Correct
        keyid extraction.
        
2006-04-28  Timo Schulz  <[email protected]>

        * wptMAPI.cpp (mapi_send_pubkey): Use new key struct.
        * wptKeysigDlg.cpp (sigprops_dlg_proc): Prepare dialog
        for handling policy URLs.
        * wptKeyManagerDlg.cpp (save_column_info, restore_column_info):
        New option KMSortBy.
        * wptKeylist.cpp (get_key_algo): Lower priority for revoked keys.
        * wptKeyEdit.cpp (minimizeKey): New.
        * wptKeyCache.cpp (gpg_keycache_update_key): Reload utf8 uid list.
        
2006-04-27  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_get_key_ptr): New.
        * wptListview.cpp (listview_get_item_text): Drop utf8 support.
        * wptKeyCache.cpp (keycache_decode_uids): New.
        (free_native_uids): New.
        * wptKeyEdit.cpp (uid_inf_colon_handler): Do utf8 decodig here.
        
2006-04-26  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (get_keyid_from_fpr): New.
        * wptDecryptClipDlg.cpp (clip_decrypt_dlg): Use it here.
        * wptVerifyList.cpp (verlist_add_sig): Likewise.
        
2006-04-25  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Handle IDCANCEL.
        * wptMDSumDlg.cpp (hash_selected_files): New.
        (mdsum_dlg_proc): Cleanups.
        * wptKeysignDlg.cpp (keysign_dlg_proc): Fix segv.
        
2006-04-23  Timo Schulz  <[email protected]>

        * wptW32API.cpp (SetDlgItemText_utf8): New.
        (SetWindowText_utf8): New.
        (GetDlgItemText_utf8): New.
        * wptListView.cpp (listview_add_sub_item): Internal
        utf8 support.
        
2006-04-22  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (addrevoker_dlg_proc): Encode
        revoker name in UTF8.
        * wptKeysigDlg.cpp (keysig_dlg_proc): Fix utf8 problem
        with the window title.
        
2006-04-20  Timo Schulz  <[email protected]>

        * wptUTF8.cpp (native_to_utf8): Use c++ alloc.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Do not mix c and
        c++ memory allocation.
        * wptFileManager.cpp (show_verify_result): Show PKA status
        if possible.
        * wptClipVerifyDlg.cpp (get_pka_status): New.
        (clip_verify_dlg_proc): Show PKA status if possible.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Handle IDCANCEL
        to use ESC to quit the dialog.
        * wptKeyEditDlgs.cpp (keyedit_adduid_dlg_proc): Also
        encode the comment in UTF8. Thanks to Werner and Jan.
        
2006-04-16  Timo Schulz  <[email protected]>

        * wptHTTP.cpp (getErrorCode): New.
        (connect): Store winsock error code.
        * wptGPGMEData.cpp (is_armor_header): New.
        * wptGPG.cpp (check_gnupg_engine): Free context.
        (gnupg_backup_keyrings): Do not use global vars.
        * wptGPGUtil.cpp (gpg_export_seckey): Export in ascii format.
        
2006-04-15  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_get_key): New.
        (km_key_show_revoc_info): New.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg): Cleanups.
        (on_init_dialog): New.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Factour
        out some common code and use km_get_key() instead.
        * wptKeyEditDlgs.cpp (do_init_keylist): Change second
        param type. Change all callers.
        * wptKeyEdit.cpp (addNotation): New.
        * wptKeyEditCB.cpp (editkey_command_handler): Remove 'step'
        param everywhere. Change all callers.
        
2006-04-09  Timo Schulz  <[email protected]>

        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Only return true
        if the homedir value was changed.
        * wptGPG.cpp (default_key_from_cache): Only return secret key
        if public part is available.
        (set_gnupg_default_key): Fix NULL problem.
        * wptKeyEditDlgs.cpp (do_editkey_clean): Set update flag.
        * wptFileCBS.cpp (write_cb, read_cb): Better error handling.
        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Handle
        'always-on-top' correctly.
        * wptKeylist.cpp (keylist_get_recipients): Allocate enough
        mem to hold all possible keys.
        (keylist_enum_keys): Likewise.
        
2006-04-08  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (keylist_get_recipients): Always use utf8 output.
        * wptKeyserver.cpp (kserver_connect): Fixed proxy support.
        * wptKeyserverSearchDlg.cpp (fetch_keys): New.
        * WinPT.cpp (WinMain): if the default key was not found, reset
        the gpg.conf entry.
        * wptFileManager.cpp (fm_encrypt_into_zip): Use correct output
        file name.
        (show_verify_result): Always use utf8 output.
        (get_output_file): Case in-sentensive comparison.
        (fm_assume_onepass_sig): Fixed temp file handling.
        * wptClipEncryptDlg.cpp (show_invalid_recipients): Fix utf8
        output.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Fix possible segv.
        
2006-04-07  Timo Schulz  <[email protected]>

        * wptW32API.cpp (set_clip_text): Change code so it also
        works again with non-XP systems.
        
2006-04-02  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp: decrease general threshold for timeout.
        * wptKeyEditDlgs.cpp (do_editkey_clean): New.
        
2006-04-01  Timo Schulz  <[email protected]>

        * wptFileVerifyDlg.cpp (file_verify_use_event): Removed.
        * wptFileManager.cpp (restore_original_name): New.
        (fm_decrypt): Restore original file name from literal
        packet if possible.
        
2006-03-31  Timo Schulz  <[email protected]>

        * wptCommonDlg.cpp (nls_load_langlist): New.
        (nsl_set_language): New.
        (nls_dlg_proc): New.
        (select_language): New. Allow user to select the language.
        * wptNLS.c (get_gettext_langid): Updated available languages.
        * WinPT.cpp (WinMain): Allow to select the languag on first
        start in non-installer environments.
        * wptVerifyList.cpp (verlist_build): Simplified.
        (verlist_add_sig_log): Likewise.
        * wptListview.cpp (listview_set_column_width,
        listview_get_selected_item): New.
        * wptKeyManager.cpp (gpg_clip_export): Merged into..
        (km_clip_export): ..this function.
        
2006-03-30  Timo Schulz  <[email protected]>

        * wptW32API.cpp (insert_menu_item): New.
        * wptSigTreeDlg.cpp (create_popup): Use it.
        (sigtree_dlg_proc): Only show the name of the owner in the title.
        * wptMainProc.cpp (init_common_controls): Initialize all
        common controls here.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Drop static
        keyserver menu concept. Add all keyservers dynamically.
        
2006-03-29  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_refresh_one_key): Fix problem
        with preferred keyserver.
        * wptCommonDlg.cpp (check_URL): Allow non-http URL.
        * wptKeyEditDlgs.cpp (subkey_subclass_proc,
        uid_subclass_proc): Disable shortcuts for non keypairs.
        * wptMainProc.cpp (winpt_main_proc): No user interaction
        on automatic shutdown. Thanks to Werner.
        * wptGPGUtil.cpp (xcalloc): New.
        (gpg_rebuild_cache): Use --batch.
        
2006-03-26  Timo Schulz  <[email protected]>

        * wptSigTreeDlg.cpp (sigtree_load): Always use UTF8.
        * wptMainProc.cpp (winpt_main_proc): Reload key cache
        when the GPG settings were changed.
        * wptKeygenDlg.cpp (keygen_wizard_dlg_proc,
        keygen_dlg_proc): Improved check for the email address.
        * wptKeyEditDlgs.cpp (keyedit_adduid_dlg_proc): Likewise.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Modified design.
        
2006-03-22  Timo Schulz  <[email protected]>

        * wptClipSignDlg.cpp (on_init_dialog): New.
        Check that there is at least one useable signing key.
        * wptSigTreeDlg.cpp (sigtree_load): Correct UTF8 handling.
        * wptKeyEditDlgs.cpp (keyedit_set_pref_keyserver): Show error
        if needed.
        
2006-03-21  Timo Schulz  <[email protected]>

        * wptUTF8.cpp (native_to_utf8): Use directly W32 API.
        (utf8_to_native): Likewise. Remove cp850 conversion.
        * wptKeyEditDlgs.cpp (do_find_userid): Correct UTF8 handling.
        * wptKeyManager.cpp (km_delete_keys): Do not reset 'with_seckey'
        flag.
        
2006-03-20  Timo Schulz  <[email protected]>

        * wptUTF8.cpp (get_native_charset): Removed.
        (utf8_to_native): Rewritten.
        * wptKeyEditDlgs.cpp (do_add_new_userid): Correct charset
        handling.
        * wptKeygenCBDlg.cpp (keygen_cb): Do proper reset if needed.
        
2006-03-16  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Disable all CryptDisk code.
        * wptCryptDisk.cpp: Disable code.
        * wptProxySettingsDlg.cpp (proxy_settings_dlg_proc): Support for
        NONE proxy protocol.
        (init_proxy_procotol): Likewise.
        (read_proxy): Likewise.
        * wptKeyserverSearchDlg.cpp (on_init_dialog): New.
        (keyserver_search_dlg_proc): Use it here.
        * wptKeyserverDlg.cpp (hkp_send_key): Use GPGME wrapper.
        * wptKeyserver.cpp (kserver_search_end): New.
        (kserver_search_begin): Be more strict on mem allocation.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Fix 'redraw'
        problem.
        * wptAboutDlgs.cpp (about_dlg_proc): Hide 'Help' button.
        
2006-03-12  Timo Schulz  <[email protected]>

        * wptGPG.cpp (gnupg_load_config): Search for 'ask-cert-expire'.
        * wptKeyPropsDlg.cpp (display_key_info): Automatically update
        sym algorithm preferences if needed.
        * wptKeysignDlg.cpp (date_is_today): New.
        (keysign_dlg_proc): Only allow to set cert expire date if
        the option was found.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Allow to set
        'ask-cert-expire'.
        
2006-03-10  Timo Schulz  <[email protected]>

        * wptHTTP.c: deleted.
        * wptHTTP.cpp (wHTTP): Transformed old code into an object.
        * wptKeyManager.cpp (km_http_import): Use new code.
        (km_refresh_one_key): Use preferred keyserver if possible.
        * wptComonDlg.cpp (check_URL): Better conformance checking.
        * wptKeyEditCB.cpp (cmd_keyserver_handler): By default
        set keyserver for all userids.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Enable code
        to set preferred keyserver.
        * wptKeyCache.cpp (decode_subpacket): New.
        (gpg_keycache_update_attr): New.
        * wptGPGUtil.cpp (gpg_find_key_subpacket): New.
        * wptKeyEditDlgs.cpp (keyedit_set_pref_keyserver): Use
        -1 as an index for all userids.
        
2006-03-07  Timo Schulz  <[email protected]>

        * WinPT.cpp (set_default_keyserver): New.
        * wptKeyserver.cpp (kserver_set_socket_timeout): New.
        (kserver_set_default_keyserver): Initialize default settings
        if needed.
        * wptSymEnc.cpp (gpg_encrypt_symmetric): Disallow empty passwords.
        * wptPassphraseDlg.cpp (request_passphrase): Handle new flag.
        (passphrase_dlg_proc): Support new safe edit window procedure.
        * wptPassphraseCB.cpp (passphrase_callback_proc): Likewise.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Flush passphrase cache
        if user disable it.
        * wptKeylist.cpp (keylist_build): Do not scale images but use
        original size.
        * wptListView.cpp (listview_set_image_list): New size params.
        Change all callers.
        
2006-03-01  Timo Schulz  <[email protected]>

        * wptW32API.cpp (set_clip_text): Free all memory.
        
2006-02-27  Timo Schulz  <[email protected]>

        * wptSOCKS.cpp (socks_handshake): New.
        * wptMainProc.cpp (winpt_main_proc): A dbl-click forces
        the key manager in teh foreground if possible.
        * wptHotkey.cpp (hotkey_unregister): Unregister all hotkeys.
        * wptRegistry.cpp (get_reg_proxy_prefs,
        set_reg_proxy_prefs): Use directly the proxy context. 
        Changed all callers.
        * wptProxySettingsDlg.cpp (init_proxy_protocols): New.
        (keyserver_proxy_dlg_proc): Use directly the proxy context.
        * wptKeyserver.cpp (kserver_connect): Better proxy support.
        (kserver_send_request, kserver_recvkey_request): Likewise.
        * wptKeyserverDlg.cpp (name_from_proto): New.
        (set_proxy): Adjusted for the new code.
        
2006-02-26  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Removed hotkey_modify() code.
        * wptKeyEditDlgs.cpp (is_idea_protect_algo): Better support
        v4 keys.
        * wptKeyserver.cpp (sock_getline): Skip '\r'.
        (base64_encode): Remove @maxlen param. Changed all callers.
        (finger_readline): Removed.
        (finger_recvkey): Use internal functions.
        * wptSigTreeDlg.cpp (sigtree_dlg_proc): Support a context menu.
        (show_sigprops): New.
        (create_popup): New.
        * wptPreferenceDlg.cpp (prefs_dlg_proc): Cache amount is
        now in minutes.
        * wptRegistry.cpp (get_winpt_reg_prefs, set_winpt_reg_prefs):
        Change code to use hotkeys directly.
        * wptHotkeys.cpp (hotkeys_enable, hotkey_disable): Likewise.
        
2006-02-24  Timo Schulz  <[email protected]>

        * wptGPG.cpp (set_gnupg_default_key): Allow to remove entry
        when parameter is NULL.
        * wptKeyManager.cpp (check_exist_default_key): New.
        (km_delete_keys): Check if the default key is still valid,
        if not delete entry.
        * wptSigTreeDlg.cpp (sigtree_dlg_proc): Forgot to localize
        button.
        
2006-02-21  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg_proc): Minor
        cleanups.
        * wptGPGUtil.cpp (file_extract_recipients): New.
        (clip_extract_recipients): New.
        (gpg_get_recipients): New.
        * wptPassphraseCB.cpp (passphrase_callback_proc): Support
        external recipient listings.
        
2006-02-15  Timo Schulz  <[email protected]>

        * wptKeysignDlg.cpp (keysign_dlg_proc): Localize new checkbox.
        * wptFileStatDlg.cpp (get_s2k_algo): New.
        * wptFileManagerDlg.cpp (update_status_bar): Use human readable
        formats.
        
2006-02-14  Timo Schulz  <[email protected]>

        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Localize 'Cancel'.
        * wptKeysignDlg.cpp (keysign_dlg_proc): Implement 'Hide Typing'.
        * wptFileManager.cpp (fm_sym_encrypt): Set cancel.
        (fm_parse_files): Handle cancel.
        
2006-02-10  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (props_dlg_proc): Removed unused vars.
        * wptKeyEditDlgs.cpp (do_editkey_check): Use winpt_key_t
        for the dialog param.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Use new list
        signature dialog by default.
        * wptKeysigDlg.cpp (sigprops_dlg_proc): Use directly
        gpgme_key_sig_t as param.
        (keysig_dlg_proc): Change param for property dialog.
        * wptSigTreeDlg.cpp (sigtree_load): Skip revoked user-ids
        and use icons.
        (sigtree_dlg_proc): Allow to execute old list dialog to
        edit the signatures.
        
2006-02-09  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (set_winpt_reg_prefs): Removed keylist mode.
        * wptNLS.c (gettext_localize_dialog): New.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Add 'Cancel' button
        to avoid to reload the key cache.
        * wptClipEncryptDlg.cpp (clipenc_dlg_proc): Drop old 'normal'
        list mode.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Likewise.
        * wptPreferencesDlg.cpp (on_init_dialog): New. Move dialog
        initiation code to this function.
        (prefs_dlg_proc): Use it here.
        
2006-02-07  Timo Schulz  <[email protected]>

        * wptKeyEdit.cpp (setNoPassphrase): New.
        (getValidDays): New.
        * wptKeysignDlg.cpp (keysign_dlg_proc): Check on init
        if the key is protected.
        * wptKeyEditDlgs.cpp (keyedit_addphoto_dlg_proc): Handle
        keys without a passphrase.
        (keyedit_addrevoker_dlg_proc): Likewise.
        
2006-02-04  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Check for
        at least one ultimately trusted key.
        * wptKeyManager.cpp (km_refresh_key_from_keyserver):
        Only check inet connection if we refresh all keys.
        * wptGPGUtil.cpp (gpg_extract_keys): New.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Use textmode.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Likewise.
        * wptClipSignDlg.cpp (get_selected_key): New.
        (one_key_proc): Use it here.
        (count_useable_seckeys): New.
        * wptSigTreeDlg.cpp (sigtree_dlg_proc): New.
        * wptKeyEditDlgs.cpp (diff_time): Removed.
        (w32_mktime): New.
        (keyedit_addsubkey_dlg_proc): Use it here.
        
2006-02-02  Timo Schulz  <[email protected]>

        * wptW32API.cpp (get_temp_name): New.
        * wptKeyserver.cpp (ldap_recvkey): Use it here.
        * wptKeyPropsDlg.cpp (get_photo_tmpname): Likewise.
        * wptGPGUtil.cpp (create_tempfile): Likewise.
        * wptImportList.cpp (implist_load): Likewise.
        * wptKeyCache.cpp (parse_attr_data): Likewise.
        (w32_tempfile): Removed.
        * wptGPGME.cpp (check_ultimate_trusted_key): New.
        
2006-01-31  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Fix usage of the
        help system.
        * wptListView.cpp (listview_set_chkbox_style): New.
        (listview_get_item_state): Support new checkbox style.
        (listview_new): Reset flag var.
        * wptKeylist.cpp (keylist_build): Support new checkbox style.
        
2006-01-30  Timo Schulz  <[email protected]>

        * WinPT.cpp (check_readonly_attr): New.
        (load_gpg_env): Use it here.
        (WinPT): Make the the default key is searched in the
        secret key cache.
        Change error message.
        * wptRegistry.cpp (regist_int_winpt): Make sure
        the register extension is only offered once to the user.
        * wptKeyPropsDlg.cpp (get_photo_tmpname): Always use
        temp directory. Fixed a privilege problem.
        
2006-01-29  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Allow to use ESC
        to quit dialog.
        * wptKeysignDlg.cpp (sig_class_dlg_proc): More space for
        translations. Directly return sig class.
        (keysign_dlg_proc): Change msgbox title.
        * wptKeyEdit.cpp (signUserid): New.
        (getUseridIndex): New.
        (getKeyIndex): New.
        (getSigIndex): New.
        (clear): New.
        * wptKeyEditCB.cpp (cmd_sign_handler): Allow to select
        user-id first.
        * wptKeyEditDlgs.cpp (lookup_cmd): New.
        (do_editkey_sign_userid): New.
        (do_init_cmdlist): Differ between key pairs and public keys
        and allowed actions.
        (keyedit_change_ownertrust): Show msgbox on success.
        (get_default_key): New.
        * wptPassphraseDlg.cpp (request_passphrase): Reset @cancel.
        
2006-01-27  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Set minimal list mode as default.
        * wptKeyCache.cpp (gpg_keycache_sync): Handle special v3 keys.
        
2006-01-25  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (get_reg_entry_gpg): Return NULL if
        the key exist with no value.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Translate string.
        * wptKeysignDlg.cpp (do_fill_seclist): Select the
        default key if possible.
        * wptFirstRunDlg.cpp (firstrun_dlg_proc): Directly
        return the choice.
        * wptKeylist.cpp (get_key_desc): New.
        (keylist_upd_key): Free memory.
        * wptKeyCache.cpp (gpg_keycache_get_default_key): New.
        (gpg_keycache_set_default_key): New.
        * WinPT.cpp (gpg_prefs_ok): New.
        (WinMain): Only start gpg prefs if needed.
        
2006-01-24  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_dropped_file_import): New.
        * wptKeyManagerDlg.cpp (keylist_subclass_proc): Allow
        to drop files and try to import them.
        (keymanager_dlg_proc): Pass kmi as opaque to the subclass
        proc.
        
2006-01-23  Timo Schulz  <[email protected]>

        * wptMDSumDlg.cpp (mdsum_dlg_proc): Allow to send output
        to the clipboard.
        * wptKeyEditDlgs.cpp (keyedit_change_ownertrust): New.
        (do_editkey_enable_disable): New.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Usability fix. Do not
        close the dialog if the user cancelled the ownertrust dialog.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Return TRUE to indicate
        an update of any value.
        
2006-01-21  Timo Schulz  <[email protected]>

        * wptKeyCache.cpp (keycache_next_key): Handle the case
        that there is a secret key without a public part.
        * wptKeyserver.cpp (kserver_save_conf): Save ports.
        * wptKeyserverDlg.cpp (keyserver_modify_dlg_proc):
        Reset keyserver name.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Just indicate
        an update, do not update the cache.
        * wptFileManagerDlg.cpp (file_import_dlg_proc): Use one
        dialog for both clipboard and file imports.
        * wptKeyManager.cpp (km_file_import, km_clip_import):
        Changes to support new update system.
        (gpg_clip_import): New.
        * wptKeyManagerDlg.cpp (km_gui_import): New.
        (find_keypos): Rewritten.
        (refresh_keylist): Improved error checking.
        
2006-01-20  Timo Schulz  <[email protected]>

        * wptKeyCache.cpp (w32_tmpfile): New.
        (parse_attr_data): Use it here.
        * wptGPGUtil.cpp (gpg_get_photoid_data): Reset @ndata var.
        
2006-01-19  Timo Schulz  <[email protected]>

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Do not
        reload the entire cache, just update the key.
        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Likewise.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Set update flag.
        * wptKeyRevokersDlg.cpp (key_revokers_dlg_proc): Likewise.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Update key
        if need after showing the properties.
        * wptGPGMEData.cpp (gpg_data_putc): Fix off-by-one bug.
        * wptKeyManager.cpp (km_import_file): New param. Changed
        all callers.
        (km_import_clip): Likewise.
        (delete_keys_from_cache): Delete secret part if available.
        * wptClipImportDlg.cpp (print_import_status): If there
        are too many new keys, use reload code.
        
2006-01-18  Timo Schulz  <[email protected]>

        * wptKeyEditCB.cpp (cmd_delsig_handler): Do not assume
        the self sig is always index 0. Noted by Kurt.
        * wptPassphraseCB.cpp (passphrase_dlg_proc): Do not assume
        the key user-ID contains an email address.
        * wptKeyEditDlgs.cpp (do_find_userid): Likewise.
        (do_editkey_deluid): Likewise.
        (do_editkey_revuid): Likewise.
        
2006-01-18  Timo Schulz  <[email protected]>

        * wptListview.cpp (listview_del_sel_items): Fixed index
        calculation. This fixed a lot of problems with the KM listview
        update.
        (listview_del_all): Renamed to...
        (listview_del_all_items): ..this. Changed all callers.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Just refresh
        list when file import contained new/updated keys.
        * wptKeyManager.cpp (km_file_import): Indicate if the
        import contained any new/update keys.
        * wptClipImportDlg.cpp (print_import_status): Just mark
        keys which actually changed.
        
2006-01-17  Timo Schulz  <[email protected]>

        * wptMAPI.cpp (mapi_send_pubkey_ext): New.
        * wptKeysigDlg.cpp (do_delsig): Just flag the key, do not
        update it.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Be more
        careful about const pointers.
        * wptKeyEditDlgs.cpp (get_subkey_fingerprint): Renamed to..
        (get_subkey_keyid): ..this. Fix problem that key was updated
        twice and this corrupted.
        (keyedit_add_subkey): Set @lv item in the callback context.
        
2006-01-16  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Restore
        window if it lost focus during the operation. Thanks to Kurt.
        Update keylist when the window is enabled.
        (find_keypos): New.
        * wptKeyCache.cpp (keycache_next_key): Reset update status.
        (gpg_keycache_next_updated_key): New arg @r_status. Change all
        callers.
        (gpg_keycache_update_key): Different status for new and updated.
        Include key signatures. 
        * wptClipImportDlg.cpp (print_import_status): Mark all
        imported keys.
        * wptMainProc.cpp (clip_gpg_dlg): On import refresh KM keylist.
        Thanks to Kurt.
        * wptKeysigDlg.cpp (recv_missing_keys): Mark all received keys.
        (do_delsig): Directly reload key. Thanks to Kurt.
        * wptGPGME.cpp (keycache_set_reload, keycache_get_reload):
        Removed.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Use new update system.
        * wptClipImportDlg.cpp (clip_import_dlg_proc): Return
        FALSE if no keys were updated or operation was cancelled.
        * wptCommonDlg.cpp (http_dlg_proc): Fix title selection code.
        * wptKeylist.cpp (get_ext_validity): Handle disabled keys.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc):
        Do not allow to change ownertrust of invalid keys.
        Changed translation.
        Slightly different user interface.
        
2006-11-14  Timo Schulz  <[email protected]>

        * wptW32API.cpp (make_special_filename): New.
        * wptRegistry.cpp (set_winpt_reg_prefs, get_winpt_reg_prefs):
        Removed 'KeyServer' item.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Remove keyserver
        config item.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Disable group
        window until we really use it.
        * wptKeyserver.cpp (kserver_save_conf): New.
        (wsock_end): Save keyserver config file.
        * wptKeyserverDlg.cpp (keyserver_edit): New.
        (keyserver_remove): New.
        (keyserver_add): New.
        (fill_keyserv_types): New.
        (keyserver_modify_dlg_proc): New.
        (keyserver_dlg_proc): Provide context menu to modify the
        keyserver list.
        (keyserver_build_list): Remove 'proto' column because it is
        not really useful.
        * WinPT.cpp (load_keyserver_conf): Store keyserver.conf at
        $APPDATA\winpt. If keyserver.conf exists in the current folder
        move it to the new destination.
        
2006-11-13  Timo Schulz  <[email protected]>

        * wptPreferencesDlg.cpp (prefs_dlg_proc): Changed translation.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Likewise.
        * wptAboutDlgs.cpp (about_dlg_proc): Make sure GPG about
        dialog isn't shown twice.
        * wptKeyCache.cpp (gpg_keycache_next_updated_key): New.
        (gpg_keycache_update_key): Set update flag.
        * wptKeyManagerDlg.cpp (refresh_keylist): New.
        (keymanager_dlg_proc): Use new refresh system for keyservers.
        * wptKeyserverSearchDlg.cpp (kserver_search_dlg_proc):
        Update keycache.
        * wptKeyserverDlg.cpp (hkp_dlg_proc): Likewise. 
        * wptKeyserver.cpp (socket_read_ext): New.
        (kserver_recv_key_ext): New.
        (kserver_read_config, kserver_write_config): Removed.
        
2006-01-12  Timo Schulz  <[email protected]>

        * wptListView.cpp (listview_set_image_list): Make icons
        always transparent.
        * wptImageList.cpp (imagelist_load): New icons.
        * wptGPGMEData.cpp (gpg_data_putc): New.
        * wptKeyManagerDlg.cpp (load_toolbar): Include new icons.
        (keymanager_dlg_proc): Add tooltips.
        * wptKeyserverDlg.cpp (keyserver_list_build): Use icons.
        * wptKeyserver.cpp (URL_encode): New.
        (URL_must_encode): New.
        (kserver_search_init): Properly encode pattern.
        (parse_iso_date): New.
        (keyserver_search): Be more strict to prevent buffer overflows.
        
2006-01-11  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (load_toolbar): 2 new icons.
        (keymanager_dlg_proc): Adjust tooltips.
        (update_ui_items): Handle new icons.
        * wptImageList.cpp (imagelist_load): New icons.
        
2006-01-10  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Restore iconic
        File/Key Manager windows if needed.
        * wptGPGPrefsDlg.cpp (gpg_prefs_dlg_proc): Disable button.
        * wptSiglist.cpp (init_cmp): New.
        (siglist_sort): New.
        (siglist_cmp_cb): New.
        (siglist_add_key): Force NOKEY status when key was not found.
        * wptKeysigDlg.cpp (recv_single_key): New.
        (recv_missing_keys): Reload entire key when more than one key
        was fetched.
        (keysig_dlg_proc): Support sorting the listview items.
        
2006-01-09  Timo Schulz  <[email protected]>

        * WinPT.cpp (load_gettext): Remove file locking.
        (WinMain): Use pre-defined autoconf constants.
        * wptW32API.cpp (init_file_lock, release_file_lock): Deleted.
        * wptGPG.cpp (check_gnupg_engine): Add param @need_gpg_ver.
        Change all callers.
        
2006-01-07  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_refresh_from_keyserver): Summarize
        import status if just one key was selected.

2006-01-04  Timo Schulz  <[email protected]>

        * wptGPGMEWrapper.c (setChangeVersion): New.
        (exportToBuffer, exportToFile, exportToClipboard): New.
        (setArmor, getArmor): New.
        * wptKeylist.cpp (get_key_expire_date): Return locale specific
        date.
        (keylist_get_recipients): Do not fetch the key again.
        (keylist_enum_recipients): Likewise.
        * wptGPG.cpp (create_empty_keyring): New.
        (get_gnupg_keyring): Fixed 'strict' logic.
        * wptKeyManagerDlg.cpp (update_ui_items): Disable some buttons
        when no secret keys are available.
        * wptKeyManager.cpp (km_send_to_mail_recipient): Release key data
        before the MAPI call is made.
        * WinPT.cpp (check_for_empty_keyrings): New.
        
2006-01-03  Timo Schulz  <[email protected]>

        * pubkey.ico, keypair.ico: New.
        * wptListview.cpp (listview_add_item_image): New.
        (listview_set_image_list): New.
        * wptSigList.cpp (siglist_add_key): Correct order of the sigs.
        * wptKeyProps.cpp (keyprops_load_photo): Adjusted for new
        JPEG data.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Do not allow to
        add items to revoked keys.
        * wptKeyManager.cpp (km_delete_keys): Do not use uninitialized
        keyid buffer. This fixes a segv.
        * wptKeyserver.cpp (spawn_application): New.
        (ldap_recv_key): Support recent protocols and several cleanups.
        * wptKeylist.cpp (do_addkey): Set image which depends on the
        key type.
        (keylist_enum_recipients): Cleanups.
        (keylist_get_keyflags): Rewritten.
        * wptKeyCache.cpp (free_attr_list): New.
        (parse_attr_list): New.
        (parse_attr_data): New.
        (keycache_update_photo): New.
        (keycache_update_photos): New.
        (gpg_keycache_update_key): Automatically reload photos if needed.
        * wptGPGUtil.cpp (create_process): New param @err. Change all
        callers.
        (map_tmpfile): New param @nread. Change all callers.
        (gpg_get_photoid_data): New.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Do not allow to
        add items to revoked keys.
        (subkey_init_list): Store gpgme key object.
        
2005-12-29  Timo Schulz  <[email protected]>
 
        * wptKeygenDlg.cpp (keygen_dlg_proc): Request passphrase dynamically.
        (gpg_genkey_params): Simplified.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Fix problem with mutal
        exclusion of the dialog items.
        * wptAboutDlgs.cpp (about_winpt_dlg_proc): Allow to use ESC to
        quit the dialog.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Likewise.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Handle WM_SYSCOMMAND.
        (id2algo): New.

2005-12-28  Timo Schulz  <[email protected]>

        * wptKeyserverDlg.cpp (show_imported_keys): Decode user IDs.
        * wptKeyRevokersDlg.cpp (key_revokers_dlg_proc): Likewise.
        * wptKeylist.cpp (keylist_udp_key): Likewise.
        * wptKeyManager.cpp (key_get_clip_info, key_get_info): Likewise.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg_proc): Fix problem
        when no signing key was found.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Properly decode
        user IDs.
        (translate_popup_strings): s/Revoke/Revoke Cert.
        * wptKeyEditDlgs.cpp (do_init_keylist): Do not assume a
        0x prefixed keyid.
        * wptKeyEditCB.cpp (editkey_command_handler): Also reset
        step in case of a bad passphrase.
        
2005-12-27  Timo Schulz  <[email protected]>

        * wptListView.cpp (listview_set_view): New.
        (listview_del_column): New.
        * wptW32API.cpp (get_locale_date): New.
        (get_menu_state): New.
        (force_foreground_window): New.
        * wptVerifyList.cpp (strtimestamp): Support for
        locale date formats.
        * wptGPGUtil.cpp (gpg_revoke_cert): Handle bad
        passphrases.
        * wptKeyEditCB.cpp (editkey_command_handler): Immediately
        return when a bad passphrase was submitted.
        * wptKeyRevokersDlg.cpp (keyrevokers_dlg_proc): Change
        column order.
        * wptKeylist.cpp (keylist_upd_col): New.
        * wptKeyManagerDlg.cpp (update_ui_items): Deactivate
        'Revocation' for public keys.
        (translate_menu_strings): s/Revoke/Revoke Cert.
        (modify_listview_columns): New.
        
2005-12-18  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (save_column_size): New.
        (restore_column_size): New.
        (keymanager_dlg_proc): Save and restore column sizes for
        the listview control.
        * wptKeyManager.cpp (key_get_info): New.
        (km_delete_keys): Use it here to have a consistent message.
        Use stored key context and not the column data.
        (km_enable_disable_key): Likewise.
        (km_send_to_keyserver): Likewise.
        (km_set_implicit_trust): Likewise.
        * wptKeylist.cpp (get_key_pubalgo2): New.
        
2005-12-17  Timo Schulz  <[email protected]>

        * wptUTF8.cpp: Removed unused charset array.
        * wptSigList.cpp (siglist_build): Increase size for 'class'
        column.
        * wptGPG.cpp (get_gnupg_path): Simplified.
        * WinPT.cpp (load_gpg_env): New.
        (check_crypto_engine): Return type is now bool.
        * wptRegistry.cpp (is_gpg4win_installed): New.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): More consistent
        dialog design.
        * wptKeyManagerDlg.cpp (translate_menu_strings): New.
        (translate_popupmenu_strings): New.
        * wptKeyEditDlgs.cpp (is_jpg_file): New.
        
2005-12-13  Timo Schulz  <[email protected]>

        * wptCommonDlg.cpp (http_dlg_proc): Localized missing elements.
        * wptKeyManagerDlg.cpp (change_edit_menu): New.
        (change_key_menu): Renamed from...
        (menu_gpg_readonly): ..this.
        (clip_contains_pgpkey): New.
        (update_ui_items): Do not allow to sign expired keys.
        (keymanager_dlg_proc): Same for popup menu.
        * wptKeyPropsDlg.cpp (parse_preflist): Fixed string handling.
        * wptKeyCache.cpp (copy_uid_prefs):
        (gpg_keycache_sync): Copy uid prefs so the key property
        dialog show the correct values. Thanks to Shane.
        
2005-12-11  Timo Schulz  <[email protected]>

        * wptW32API.cpp (get_file_version): New.
        * wptGPGUtil.cpp (create_process): Always hide window.
        * wptClipEditDlg.cpp (clipedit_dlg_proc): Use 'Close'
        instead of 'Exit'.
        * wptKeyManager.cpp (km_http_import): New filename
        generation code.
        (km_send_to_mail_recipient): Cleanups.
        * wptKeyEditDlg.cpp (showpref_dlg_proc): Localize dialog.
        * wptKeyManagerDlg.cpp (update_ui_items): Handle the case
        when multiple keys are selected.
        (popup_multiple): New.
        * WinPT.cpp (WinMain): Check that the PTD.dll and WinPT.exe
        file versions are equal. Rewrote --keymanager code.
        
2005-12-08  Timo Schulz  <[email protected]>

        * wptKeyserverDlg.cpp (show_imported_keys): Enhanced.
        (hkp_recv_key2): Show user-id of the imported key instead
        of just the pattern.
        * wptFileCBS.cpp (read_cb): Changed to W32 API.
        (write_cb): Likewise. Create output file on demand.
        (gpg_file_data_new): Adjusted code for new API.
        * wptKeyEdit.cpp (cleanKey): New.
        * wptKeyEditCB.cpp (cmd_clean_handler): New.
        (editkey_command_handler): Call clean handler.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Sort
        keylist after inserting items.
        * wptFileManager.cpp (fm_set_status): Take care of
        cleartext sigs.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Make
        sure can be closed.
        
2005-12-07  Timo Schulz  <[email protected]>

        * wptOwnertrustDlg.cpp (ownertrust_dlg_proc): 
        Use 'Close' instead of 'Exit'.
        * wptKeyEditDlgs.cpp (keyedit_dlg_proc): Likewise.
        * wptGPG.cpp (gnupg_backup_keyrings): Use $APPDATA
        as the destination dir. Thanks to Werner.
        * wptRegistry.cpp (is_gpgee_installed): New.
        (regist_inst_winpt): Do not register file extensions
        if GPGee is available.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Limit
        use of local vars.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Make sure
        no illegal backup mode is saved.
        * wptKeyserverDlg.cpp (show_imported_key): New.
        (hkp_recv_key2): Show imported keys if the blob
        contained more than one.
        
2005-12-06  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Load the gettext environment soon
        as possible so all 'first start' messages are localized.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): If a single key is
        received via the keyserver, return the gpgme key context on
        success and add it directly to the list.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Support a param
        to store the key.
        (hkp_recv_key2): Add extra param for the fingerprint.
        (hkp_recv_key): Call hkp_recv_key2 without fingerprint.
        
2005-12-02  Werner Koch  <[email protected]>

        * wptKeyEditDlgs.cpp (subkey_list_init): Avoid trigraphs.

2005-12-01  Timo Schulz  <[email protected]>

        * wptClipVerifyDlg.cpp (clipverify_dlg_proc): Use new semantic
        for get_gpg_sigstat().
        * wptGPGME.cpp (get_gpg_sigstat): New. It is now a function.
        As a macro strings will not be translated at runtime.
        * wptKeyserverDlg.cpp (hkp_recv_key): Properly detect if we
        need to update the cache. Thanks to Jan-Oliver.
        * wptKeyImportStatusDlg.cpp (import_status_dlg_proc): Localized.
        
2005-11-30  Timo Schulz  <[email protected]>

        * wptW32API.cpp (dialog_box_param): Removed LANG_DE code.
        * WinPT-en.rc: Removed string list.
        * wptFileSaveDlg.cpp (file_save_dlg_proc): Localized
        * wptKeylist.cpp (keylist_build): Cannot use global
        arrays for the columns due to gettext.
        
2005-11-29  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Modify --keymanager. If an instance
        is running, just send the command to open the manager.
        
2005-11-25  Timo Schulz  <[email protected]>

        * wptKeyEditCB.cpp (addrev_cmd_handler): Avoid hanging
        process when the revoker is already there.
        
2005-11-24  Timo Schulz  <[email protected]>

        * wptPassphraseCB.cpp (passphrase_callback_proc): Localize
        signing dialog items.
        * wptMainProc.cpp (confirm_delclip_dlg): Localize dialog items.
        * wptAboutDlgs.cpp (about_winpt_dlg_proc): Disable help for now.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Localize missing items.
        * wptKeylist.cpp (key_check_validity): Likewise.
        * wptKeyEditDlgs.cpp (keyedit_addsubkey_dlg_proc): Likewise.
        
2005-11-22  Timo Schulz  <[email protected]>

        * wptCardEditCB.cpp (gpg_write): Due to removed _DEBUG
        macro debug output will be generated in release version.
        
2005-11-21  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Implement --stop switch.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Localize
        missing string.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Likewise.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Verify valid context
        first. Thanks to Ralf.
        * wptFileManagerDlg.cpp (update_ui_items): New.
        * wptFileManager.cpp (fm_set_status): New sigmode param.
        Changed all callers.
        
2005-11-17  Timo Schulz  <[email protected]>

        * wptGPG.cpp (check_last_gnupg_access): Kludge to avoid that
        the cache will be loaded twice.
        * wptRegistry.cpp (regist_inst_winpt): More comments.
        * wptKeyManagerDlg.cpp (do_center_window): Make sure that
        neg. coordinates are never used.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Localize all
        strings.
        * wptPassphraseCB.cpp (passphrase_callback_proc): Likewise.
        * wptFileManagerDlg.cpp (filemanager_dlg_proc): Localize menu
        and save 'AlwaysOnTop' in the registry.
        
2005-11-16  Timo Schulz  <[email protected]>

        * WinPT.cpp (check_crypto_engine): Min is now GPG 1.4.2.
        * wptKeylist.cpp (keylist_add_key): Add disabled keys in list
        mode.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Localize all strings.
        * wptRegistry.cpp (regist_inst_winpt): Set install directory.
        Useful for other programs to figure out the path to the EXE.
        
2005-11-14  Timo Schulz  <[email protected]>

        * wptGPG.cpp (check_gnupg_engine): Fix version check.
        * wptMainProc.cpp (winpt_main_proc): Check keyring
        file permissions always and do not use interative output
        when the windows session ends.
        * wptProxySettingsDlg.cpp (proxy_settings_dlg_proc):
        Localize all strings.
        * wptPassphraseDlg.cpp (passwd_dlg_proc): Likewise.
        * wptGPGPrefsDlg.cpp (gpg_prefs_dlg): Likewise.
        * wptKeyEditDlgs.cpp (do_init_keylist): Skip all
        non-valid keys.
        
2005-11-12  Timo Schulz  <[email protected]>

        Fix more GCC warnings.

2005-11-10  Timo Schulz  <[email protected]>

        * wptClipSignDlg.cpp (one_key_proc): Use
        release_gpg_passphrase_cb() to free the context.
        * wptListView.cpp (listview_deselect_all): New.
        * wptMAPI.cpp (mapi_send_pubkey): Works again.
        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Support encrypt &
        zip.    
        * wptPassphraseCB.cpp (passphrase_callback_proc): Fix passphrase
        caching for signing operations.
        * wptKeyManager.cpp (km_send_to_mail_recipient): Works again.
        * wptFileManager.cpp (fm_send_file): Likewise.
        (fm_encrypt_into_zip): New.      
        
2005-11-09  Timo Schulz  <[email protected]>

        * wptNLS.c (get_gettext_langid): Map user language id to
        printable gettext language strings.
        * wptRegistry.cpp (get_reg_entry_mo): Support for the
        gettext environment.
        * wptFileManager.cpp (fm_encrypt): Close all files before
        the wipe procedure is called.
        * wptVerlist.cpp (verlist_add_sig): Handle the case the
        issuer is not valid but the signature is.
        (verlist_add_sig_log): Likewise. Thanks to the folks on
        winpt-users.
        
2005-11-08  Werner Koch  <[email protected]>

        * SAFE.ICO, SIGN.ICO: Fixed capitalization.
        * WinPT-en.rc: Ditto.
        * winpt_km.ico:  Moved from ../.

        * Makefile.am (resource_files): Add missing backslash.

2005-11-08  Timo Schulz  <[email protected]>

        More minor changes to avoid GCC warnings.
        
        * wptGPG.cpp (check_homedir): Free memory in case of errors.
        (multi_gnupg_path): Add strict mode. If non-strict mode return
        the folder even if it does not exist.
        (check_for_gpgwin): New.
        * wptKeyserverDlg.cpp (hkp_recv_key): Make sure import_res is
        initialized.
        * wptRegistry.cpp (get_reg_entry_gpg4win): New.
        (get_reg_entry_mo): Support for gpg4win.
        
2005-11-07  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Disable
        some menu items when no secret key is available.
        
2005-11-05  Timo Schulz  <[email protected]>

        More minor changes to avoid GCC warnings.
        
        * wptErrors.cp (winpt_strerror): Return w32
        formatted error and do not use 'break'.
        
2005-11-04  Werner Koch  <[email protected]>

        * WinPT-en.rc: Fixed locations of icons.

2005-11-03  Timo Schulz  <[email protected]>

        A lot of minor changes to avoid GCC warnings.

        * wptGPG.cpp (get_gnupg_keyring): Only check size for
        public keyring.
        * wptKeyManager.cpp (km_update_default_key_str): Do
        not issue a bug message when no secret key was found.
        * wptGPGPrefsDlg.cpp: Replace "" with NULL in the name struct.
        
2005-11-02  Werner Koch  <[email protected]>

        * WinPT.cpp (WinMain): Disabled PTD version tests.
        (check_crypto_engine): Fixed version check for scard.

        * wptErrors.cpp (debug_end): Add dummy function.

        * Makefile.am (code_files): Added wptCardEditCB.cpp and
        wptKeyEditCB.cpp.

2005-10-31  Werner Koch  <[email protected]>

        * wptCurrWnd.cpp: Include wptVersion.h to get prototypes of PTD
        functions.

        * wptKeyEditDlgs.cpp: Include oleauto.h
        * wptKeyEdit.cpp: Include time.h.
        * wptRegistry.cpp (gpg_filetypes): New from ../Include/wptGPG.h. 
        * wptGPGUtil.cpp (gpg_manage_ownertrust): s/export/exportflag/.

        * Makefile.am (code_files): Add wptGPGUtil.cpp, wptCardEdit.cpp,
        wptKeyEdit.cpp and wptKeycache.cpp.

        * wptPassphraseCB.cpp: Fixed spelling of wptKeylist.h
        * wptImportList.cpp (implist_load): Use remove and not unlink.
        * wptGPG.cpp: Fixed spelling of wptGpgCmds.h
        * wptImportList.cpp (implist_load): Use remove and not unlink.
        * wptKeyManager.cpp (km_http_import): Ditto
        * wptMainProc.cpp: Include wptCrypto.h
        * wptKeyManager.cpp: Ditto.
        * wptFileManager.cpp: Ditto.
        * wptImportList.cpp (parse_colon_key): Need to cast argument for
        isdigit.  Include ctype.h.
        * wptGPG.cpp: Include shlobj.h.

        Fixed double inclusion of windows.h.
        
        * Makefile.am (bin_PROGRAMS): Don't build KeyManagerExe for now.
        * wptKeylist.cpp (get_key_created): Broke up trigraph.
        (get_key_status): Removed dangerous use of sprintf.  Still other
        flaws present, see comment.

        * wptCardPCSC.c: Don't include winscard.h.
        (pcsc_readerstate_t, pcsc_context_t): New.  Changed call users to
        use these types.
        (PCSC_): Added a lot of constants, all taked from GnuPG 1.9.
        (SCARD_S_SUCCESS): Changed all compares to test the value directly
        against zero.

        * WinPT.cpp: Include wptCrypto.h.
        (WinMain): Don't shard S. Removed usunsed variable SIZE.
        * Makefile.am (code_files): Actually add files by adding a first
        backslash.
        * wptMDSumDlg.cpp: Include wptCrypto.h.
        * wptProxySettingsDlg.cpp: Included ctype.h.
        * wptKeysigDlg.cpp: Fixed spelling of wptKeylist.h.
        * wptKeysignDlg.cpp: Ditto
        * wptKeyRevokersDlg.cpp: Ditto. Fixed spelling of wptW32API.h.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Replaced unlink by remove.
        Removed unused variable.
        * wptClipVerifyDlg.cpp (show_notation_data): s/not/nota/ due to
        silly c++ operator synonyms.
        * wptKeyEditDlgs.cpp: Include time.h.
        * wptClipDecryptDlg.cpp: Include wptCrypto.h to define PGP_MESSAGE.
        * wptFileManagerDlg.cpp: Ditto.
        (space_wipefrees_dlg_proc): Replaced unlink by remove; it doesn't
        matter if it does an rmdir for a directory.

        Fixed include of resource.h which is not anymore in the top
        directory.

2005-10-28  Werner Koch  <[email protected]>

        * wptProxySettingsDlg.cpp (check_number): Cast isdigit() arg to
        unsigned.  Never ever use a possible signed char as argument for
        ctype tests.  An alternative is to first test using isascii ().
        (keyserver_proxy_dlg_proc): Removed unused variable.

2005-10-27  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (get_validity): Take care of disabled keys.
        * wptKeylist.cpp (keylist_add_key): Check global key flag to
        see if the key is disabled and not each subkey.
        (seclist_init): Likewise.
        * wptClipDecryptDlg.cpp (gpgme_op_clip_decrypt): Use 
        gpgme_op_decrypt_verify. 
        (clip_decrypt_dlg_proc): Fixed fingerprint
        to keyid conversation. This also fixes a crash.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Likewise.
        * wptKeyEditDlgs.cpp (do_editkey_expire): Ask if the key
        already expired if the user wants to change the date.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Replace old
        'v3 sig' option with the 'ask cert level' option. Sync
        with global preferences.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Watch if the
        gpg.conf contains 'ask-cert-level'. If not disable button.
        * wptKeySigDlg.cpp (keysig_dlg_proc): Automatically disable
        the button when the key is available.
        Reload key directly, not the entire cache.
        
2005-10-26  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (is_floppy_disc): Prevent very unlikely but
        possible overflow.
        (is_openpgp_ext): Compare case insentensive.
        (add_single_file): New.
        (fm_add_opened_files): Support multi file selection.
        * wptKeyPropsDlg.cpp (do_change_ownertrust): Removed.
        * wptKeyManager.cpp (km_enable_disable_key): Do not set cache
        reload flag. Just update the single key.
        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Remove static var
        and disable anonymize recipient for now.

        Begin to port code to GCC. Fix all warning issued by the gcc 
        compiler.

2005-10-25  Timo Schulz  <[email protected]>

        * wptGPGUtil.cpp (create_process): Hide window.
        * wptKeyPropsDlg.cpp (get_photo_tmpname): New.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Remove
        static var 'enable'.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Likewise.
        (gpg_genkey_params): Make sure all primary keys are capable
        for signing and certification.
        * wptKeySigDlg.cpp (is_sig): If no item is selected, return 0.
        * wptGPG.cpp (gnupg_access_keyring): Check return value for
        NULL. Noted by Ralf.
        (get_gnupg_prog): Simplified.
        (check_homedir): Fixed. Return 0 when the dir is successfully created.
        * wptKeyManagerDlg.cpp (km_file_import): Use the hourglass to
        indicate a pending GPG process.
        * wptFileManager.cpp (op_begin, op_end): New. Indicate an start
        and and of an operation. For now just the cursor changes.
        (fm_parse_command_line): Remove debug output. Thanks to Ralf again.
        * WinPT.cpp (WinMain): Check if there is already an instance and
        set a variable early as possible.
        (load_gettext): If a previous instance was found, do not output 
        any errors. Kudos to Ralf.      

2005-10-24  Timo Schulz  <[email protected]>

        * wptPassphraseCB.cpp (passphrase_callback_proc): Allow to use
        pre-defined recipients.
        (release_gpg_passphrase_cb): Release recipients.
        * wptKeyPropsDlg.cpp (keyprops_load_photo): Set photo-id
        validity if needed.
        (keyprops_dlg_proc): Issue a warning if the photo is valid.

2005-10-23  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_get_file_type): Detect detached sigs.  
        * wptKeyList.cpp (keylist_cmp_cb): Take care of expired/revoked keys.
        (get_ext_validity): New.
        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Several cleanups.
        * wptClipEditDlg.cpp (load_clipboard): Factored out some code into
        this function.
        (load_clipboard_from_file): Likewise.
        (save_clipboard_to_file): New.
        * wptKeyManagerDlg.cpp (keyprops_dlg_proc): Fix stack overflow.

2005-10-22  Timo Schulz  <[email protected]>

        Localized a lot of more strings.

        * wptMainProc.cpp (load_smartcard): New.
        * wptFileManager.cpp (fm_parse_command_line): Simplify code.
        (fm_check_armor_type): Add new arg. Change all callers.
        (fm_get_file_type): Likewise.
        * wptKeyPropsDlg.cpp (display_key_info): New.   
        (keyprops_show_photo): Factored out some code into..
        (keyprops_load_photo): ..this function.

2005-10-21  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Use
        WM_INITPOPUPMENU to localize popup menu texts.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Likewise.
        * wptClipSignDlg.cpp (one_key_proc): Use wipememory instead of memset.  

2005-10-20  Timo Schulz  <[email protected]>

        Now WinPT depends on GPG 1.4.3 and GPGME 1.2.0.

        * wptPassphraseCB.cpp (passphrase_cb): Complete card support.
        * wptCardEdit.cpp (genKey): Handle cancel case.
        * keycache.c: Renamed into...
        * wptKeyCache.cpp: ...this.
        * wptW32API.cpp (set_menu_text): Removed unused code.
        (set_menu_text_bypos): New.
        * wptCrypto.h: New.
        * wptMainProc.cpp (winpt_main_proc): Complete localize
        menu texts.
        * wptErrors.cpp (log_debug): Use a static var so the file
        is only opened once.
        (debug_end): Cleanup. Currently just close the log file.
        * wptErrors.h (wipememory): New.
        (sfree_if_alloc): Use it here.
        * WinPT.cpp (WinMain): Display the min. GPGME version which
        is needed in case of an error.

2005-10-17  Timo Schulz  <[email protected]>

        Free all memory returned by the GPGME dll with gpgme_free ().

        s/GPG_ERR_CARD_REMOVED/GPG_ERR_CARD_NOT_PRESENT.

        * wptKeyEdit.cpp (getCardStatus): Remove dummy key.
        (list_handler): With user interaction to allow to insert
        the card into the reader.
        * wptKeyEditCB.cpp (gpg_edit_card): Likewise.
        (common_card_handler): Fixed incorrect command string.
        * wptKeyPropsDlg.cpp (get_card_type): New.
        (keyprops_dlg_proc): Show card information if present.
        * wptFileManager.cpp (secret_key_available): Make the code faster.
        

2005-10-16  Timo Schulz  <[email protected]>

        * wptPassphraseCB.cpp (passphrase_cb): Fix problem
        with hanging GPG process on cancel.
        * keycache.c (gpg_keycache_release): Release all objects.

2005-10-15  Timo Schulz  <[email protected]>

        * wptCardEdit.cpp (setResult, getResult): New.
        (reset): New.
        (getCardStatus): Check return codes and release all objects
        in case of errors.
        * wptCardEditCB.cpp (change_pin_handler): Call reset()
        before quit.
        (editcard_handler): Likewise.
        (common_card_handler): New.
        * wptCardDlg.cpp (card_changepin_dlg_proc): Also unmask
        the old PIN when 'Hide Typing' is disabled.
        * wptPassphraseCB.cpp (passphrase_cb): The card detection
        works again. Support to re-enter passphrase.

2005-10-14  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_status): New fields for the
        fingerprint creation time. Display card info as title.
        (get_printable_version): New.
        * wptCardEditCB.cpp (editcard_handler): Fix problem 
        with the counter comparison.

2005-10-11  Timo Schulz  <[email protected]>

        Port to GPGME basically finished.

2005-09-20  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_secdel_confirm_dlg_proc):
        Do not use gpgme_recipients_t but the listview directly
        to add the selected files.

2005-09-07  Timo Schulz  <[email protected]>

        * Make sure all GetOpenFileName filters are terminated by \0\0.

2005-09-01  Timo Schulz  <[email protected]>

        * wptW32API.cpp (center_window): New argument for parent window.
        Change all callers.
        (center_window2): Likewise.
        * GPGME now can read gpgProgram entries with 'REG_EXPAND_SZ'.
        * wptGPG.cpp (gnupg_backup_options): Remove param. One backup
        file is enough. Changed all callers.

2005-08-15  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (do_editkey_showpref): Take care of v3 keys.
        * wptGPGOptDlg.cpp (gpgopt_dlg_proc): Fixed name of title.
        * Make sure the passphrase is always overwritten before it is
        freed (or the function returns).
        * wptKeyPropDlg.cpp (get_pref_cipher): New.
        (keyprops_dlg_proc): Use it here.

2005-08-06  Timo Schulz  <[email protected]>

        * wptGPGME.cpp (keycache_update): Reload OpenPGP parts
        of the secret key.
        (keycache_init): cache name of secret keyring.
        * wptKeyList.cpp (keylist_upd_key): Do not add long keyid.
        (get_key_type): Do not assume 'ultimate' means key pair.
        * wptKeyEditDlgs.cpp (diff_time): New.
        (keyedit_addsubkey_dlg_proc): Changed design and use
        diff_time. Drop checks for invalid keylength (< 1024, > 4096)
        because the combo box automatically handles this.
        * wptKeyManager.cpp (km_set_implicit_trust): Return error code.
        * wptGPG.cpp (get_backup_name): New.
        (gnupg_backup_keyrings): Rotate backup names, from 0..3.
        * wptClipImportDialog.cpp (clip_import_dlg_proc): Free memory.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Use 0x short keyid and
        not the long keyid.

2005-08-05  Timo Schulz  <[email protected]>

        * wptListView.cpp (listview_set_item2): New.
        * wptKeyManager.cpp (km_check_if_protected): Directly
        retrieve gpgme_key_t from the list.
        (km_check_key_status): Likewise.        
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Also use
        a human-readable name for secret key export.
        Reload just the keys which were affected by updates
        (edit-key).
        (update_key): New.
        * wptKeyList.cpp ((keylist_upd_key): Stripped down
        version of keylist_add_key.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Do not
        reload the keycache here, just flag 'update'. Give the
        control to the calling dialog.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Use winpt_key_t
        as parameter. Changed all callers.
        Add date of expiration to the key info.
        (get_expire_date): New.
        Use a checkbox to allow to ask for the cert level.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Do no reload
        the cache.

2005-08-04  Timo Schulz  <[email protected]>

        * wptListView.cpp (listview_scroll): New.
        (listview_get_item2): New.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): If the
        item was found, make it visible with scrolling.
        * wptKeyManager.cpp (km_find_key): New.
        (keylist_subclass_proc): Support to handle some acceleators.
        Strg+{C, P, F, A}.
        (km_get_key_status): Get the gpgme_key_t object directly
        from the list.
        * wptGPGPRefsDlg.cpp (gpgprefs_dlg_proc): Also try to set
        the config file (if it exists).
        * wptKeySignDlg.cpp (keysign_dlg_proc): Use easier code
        to handle the click->activate situation.
        * wptPassphraseCB.cpp (passphrase_callback_proc): Likewise.
        Support to check the passphrase quality.
        * wptPassphraseDlg.cpp (passwd_dlg_proc): Likewise.
        (request_passphrase): Rename 'init' to 'flags' to allow more
        options.
        * wptMAPI.cpp: Check all *alloc results.
        * wptKeyGenDlg.cpp (keygen_dlg_proc): Use a rudimentary
        passphrase quality check.
        * wptMDSumDlg.cpp (mdsum_dlg_proc): Use md5/sha1sum file
        format and allow to save the checksum in a file.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): Issue a warning
        when the PGP mode is disabled.
        wptKeyEditDlgs.cpp (do_editkey_primary): Return if just
        one user-ID exists.
        (keyedit_dlg_proc): Fixed index problem.
        * wptKeyPropsDlg.cpp (get_validity): New.
        (keyprops_dlg_proc): Actually show extended validity if possible.
        * wptKeyList.cpp (get_key_fpr): Support for old v3 format.
        (do_addkey): Use listview_add_item2 to store key as opaque
        param inside the list.
        * wptFileStatDlg.cpp (get_digest_algo): Add SHAxxx.
        (file_stat_dlg_proc): End dialog if no PGP data was found.
        (do_list_packets): Return the number of valid PGP packets
        of the file.

2005-08-02  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Instead of
        using 'Default Keyserver' add the real keyserver name to
        the menu.
        The rebuild command does not reload the cache any longer.
        Use ATTR_NAME + .asc as the filename and not keyid + .asc.
        * wptProxySettingsDlg.cpp (enable_proxy_auth): New.
        (keyserver_proxy_dlg_proc): Changed the design a little
        and add some additional sanity checks.
        * wptGPGParser.cpp (commit_gpg_options): Use W32 line endings.
        This fixes the problem that the GPG option dialog does not show
        very nice lines.
        * wptGPGOptDlg.cpp (gpgopt_dlg_proc): s/options/config.
        * wptKeySigDlg.cpp (keysig_dlg_proc): If a single key is selected
        check for 'NOKEY' before asking a keyserver.
        * wptKeyManager.cpp (km_delete_keys): Do not set 'refresh' flag.
        If a lot of keys were selected, ask if the user wants to confirm
        each delete procedure or allow to cancel the operation.
        * wptFileManagerDlg.cpp (file_import_dlg_proc): Display how much
        keys the file contain.
        * wptKeyList.cpp (get_key_algo): Beautified.
        (get_key_status): Drop the "[XYZ] Unknown" format, it is too
        confusing for users.
        * wptKeyManager.cpp (km_check_key_status): Adjustments for the
        new code.
        (km_check_for_seckey): Reset utrust parameter. Return -1 for
        invalid (exp+rev+dis) keys.

2005-08-01  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (kserver_urlencode): Use unsigned for all given
        sizes.
        (check_IP_or_hostname): New.
        (kserver_load_conf): Correct finger URL parsing problem.
        (port_from_proto): New.
        (keyserver_load_conf): Guess the port.
        (keyserver_set_default): Allocate new buffer.
        (kserver_load_conf): Likewise.
        * wptHTTP.c (parse_reqline, parse_request): Removed.
        Use WinPT error code and remove all unused code.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Properly handle finger URLs.
        * wptProxySettingsDlg.cpp (read_proxy): Simple check for
        invalid host/IP addresses.
        * wptGPG.cpp (multi_gnupg_path): Return allocated buffer.
        Changed all callers.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): At the first start,
        automatically set 'backup to homedir'.
        * WinPT.cpp (WinMain): Use desktop window as the parent window
        to load 'first-start' dialogs.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Do not set 'refresh'
        flag after deleting keys.
        * wptFirstRunDlg.cpp (first_run_dlg_proc): Use a new structure
        for passing the arguments.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Do not store "" for
        the OptFile. This was responsible for a lot of 'General Errors'
        after the first start related to key caching.
        Automatically set the gpg binary if possible.

2005-07-22  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Take care for shutdown
        messages and make sure WinPT make a keyring backup in this case.
        * wptGPGME.cpp (keycache_reload): Do not rebuild the signature
        cache each time. Just do it on startup.
        * wptKeyManager.cpp (km_key_is_v3): Use new ATTR_VERSION.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Assume the v3 flag
        was set by the calling function.
        * wptKeyGenDlg.cpp (keygen_wizard_dlg_proc): Ask for backups.
        (keygen_dlg_proc): Only add the generated key to the keycache
        and do not reload the entire cache.
        * wptKeyManager.cpp (km_delete_keys): Store the number of keys
        because in each loop iteration it will be new calculated.
        * wptListView.cpp (listview_del_items): Likewise.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Directly add the
        generated key to the list instead of reloading the entire cache.
        * wptKeyEditDlgs.cpp (parse_preflist): Support fpr SHAnnn.

2005-05-09  Timo Schulz  <[email protected]>

        * wptCommonDlg.cpp (http_file_dlg_proc): Renamed to..
        (http_dlg_proc): ..this.
        (get_keyserver_URL_dlg): New.
        (check_URL): New.
        * wptKeyEditDlgs.cpp (keyedit_set_pref_keyserver): New.
        (keyedit_main_dlg_proc): Avoid massive keycache reloads, just reload
        the single key.
        * wptKeyRevokersDlg.cpp (key_revokers_dlg_proc): Show the key 
        properties of the selected desig. revoker.
        * wptVerifyList.cpp (verlist_build): Increase the column 
        size of 'keyid'.
        * wptGPGME.cpp (keycache_update): New.
        * wptKeySigDlg.cpp (keysig_dlg_proc): Update the key if a signature 
        was deleted.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Zeroing the key struct 
        before we set any values.       

2005-05-03  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_parse_command_line): Handle
        'SYMKEYENC' files. Thanks to the user who reported it.
        * wptKeyEditDlgs.cpp (do_find_userid): Optionally return the context.
        (showpref_dlg_proc): New.
        (keyedit_main_dlg_proc): Support SHOWPREF.
        (userid_list_init): New field 'Email'. Split userID into 'Name' + 'Email'.
        (do_add_new_userid): Adjust for new ListView.
        (do_find_userid): Use email for searching.
        (parse_preflist): New. 

2005-04-19  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (kserver_update_proxyuser): Fixed
        buffer overflow that occurred when the proxy password
        is > 29 chars. Thanks to the friendly user who reported this.
        (kserver_search): Handle the case the key is revoked. Thanks
        to Ralf.
        (kserver_connect): More logging.
        (kserver_sendkey): Likewise.
        * wptProxySettingsDlg.cpp (check_number): New.
        (read_proxy): Check the entered port number.
        * wptKeySignDlg.cpp (sig_class_dlg_proc): Check default button.
        * wptW32API.cpp (get_folder_dlg): Free memory.

2005-04-11  Timo Schulz  <[email protected]>

        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Reset
        'enable' flag always at the begin.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Show correct
        key trust. Noted by a friendly user.
        * wptListView.cpp (listview_add_item_pos): New.
        * wptKeyEditDlgs.cpp (get_subkey_fingerprint): Due to
        the fact that GPG does not return the fingerprint of
        the generated subkey any longer, we need to get it manually.
        Thanks to Maxime Brandt.
        (keyedit_addsubkey_dlg_proc): If key size too large, ask
        if this was a mistake.
        (keyedit_add_subkey): Use it here.
        (do_add_new_subkey): Fix list contrl insertion.
        * wptTypes.h (DEFAULT_KEYSIZE): Define new default keysize constant.

2005-04-04  Timo Schulz  <[email protected]>

        * WinPT.cpp (check_crypto_engine): Correct version
        check. Noted by Werner.

2005-03-22  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): --debug as an alias for --enable-debug.
        (enable_mobile_mode): New.
        * wptKeyEditDlg.cpp (keyedit_addsubkey_dlg_proc): Use new
        ID's for adding subkeys.

2005-03-06  Timo Schulz  <[email protected]>

        * wptKeySignDlg.cpp (do_fill_seckeylist): Skip secret keys without
        a public key. Noted by Kurt Fitzner.

2005-03-04  Timo Schulz  <[email protected]>

        * GPG asks twice for the new PIN. Thanks to Achim.
        * wptCardDlg.cpp (card_changepin_dlg_proc): Reset the 'safety' pin also.
        Only check the passphrase if the backup flag is enabled. Again thanks to
        Achim.

2005-03-03  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_changepin_dlg_proc): Add item to re-type the
        new PIN. Suggested by Achim.
        Support to show the unmasked PIN.
        Modified TAB-order.
        * wptPINDlg.cpp (pin_cb_dlg_proc): Show unmasked PIN.

        * Fixed wrong GPG --command-fd strings. Thanks to Achim.

2005-02-23  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (check_hkp_response): Support for HTTP/1.1.
        (kserver_search): Be more strict.
        * WinPT.cpp (WinMain): Enable FM progress by default.
        * wptFileManagerDlg.cpp (file_preferences_dlg_proc): New.
        (fm_parse_files): Use progress dialog only if it is 
        enabled.

2005-02-07  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_parse_files): Do not use the progress dialog
        for signing and verifying. But this does not fix the problem tha the
        dialog sometimes stay and is not destroyed.

2005-02-04  Timo Schulz  <[email protected]>

        * wptProgressDlg.cpp (progress_cb_thread): Set root window if available.
        If the progress window survives by accident, it will be closed when the
        File Manager (root window) is closed.

2005-02-02  Timo Schulz  <[email protected]>

        * wptPassphraseDlg.cpp (passwd_dlg_proc): use center_window2, otherwise
        it is invisible.
        * wptPassphraseCB.cpp (passphrase_callback_proc): Do not cache symmetric
        passphrases.
        * Enable the progress dialog for symmetric encryption.
        * wptFileManager.cpp (fm_check_file_type): Also check for 'SYMKEYENC' in
        FM_ENCRYPT mode.
        * WinPT.cpp (WinMain): SETUP_EXISTING implemented.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Reset 'Locale directory' when
        no value is entered.

2005-01-26  Timo Schulz  <[email protected]>

        * wptGPG.cpp (multi_gnupg_path): Zero buffer before use.
        * wptKeyManagerDlg.cpp: Add 'Select All' feature.
        Move 'Edit->Key' to 'Key->Edit'.
        * wptFileManagerDlg.cpp: Likewise.
        * wptKeyPropsDlg.cpp (keyprops_show_photo): Show the JPG photo directly.
        * wptKeyManager.cpp (spawn_loadimage): Removed.
        (km_show_photo): Removed.
        * wptRevokersDlg.cpp (revokelist_init): Fixed index.
        * wptErrors.cpp (winpt_strerror): Show system error for registry 
        related problems.

2005-01-25  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_keygen_dlg_proc): Make 'backup keys' default
        and that all values are 7-bit ASCII.
        Use '*' for the passphrase field.
        * wptGPG.cpp (multi_gnupg_path): New.
        (get_gnupg_path): Use it here.
        (check_homedir): Likewise.
        * wptKeyserverDlg.cpp (save_default_ks): Fix problem that the port
        is actually set.
        * wptFileManager.cpp (fm_clearsign_8bit): New.
        (fm_parse_files): Check if the file to clearsign is really 7-bit.
        Thanks to djek.
        (fm_set_ftype): Factored out some code from...
        (fm_add_dropped_files): ...here. Simplied the code.
        (fm_add_dir_files): New.
        * Removed MD5 from MyGPGME and the new default sym cipher is AES.
        * wptProgressDlg.cpp (progress_dlg_proc): Use additional HAND var
        to track the window handle.
        (progress_cleanup): Try to close tracking handle first.

2005-01-21  Timo Schulz  <[email protected]>

        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Allow to retrieve keys
        which are not in the keyring. Suggested by djek.
        * wptFileManagerDlg.cpp (filemanager_dlg_proc): Implement basic
        'Always on Top'.
        Allow to send encrypted files via MAPI.         
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Only reload the keycache
        if the HKP retrieval succeeded.
        * wptFileStatDlg.cpp (do_list_packets): Make sure that the pkt pointer
        is not NULL.
        * wptKeyManager.cpp (km_clip_export): Prefix the clipboard text with
        a header similar to 'gpg -k name'.
        * wptErrors.cpp (log_box): Use msg_box to make sure the box is visible
        with 'Always on Top' windows.
        * wptFileManager.cpp (fm_parse_files): Set progress callback for 
        wiping files.
        (fm_add_opened_files): Do not add the file in case of an error.
        * wptKeyserverDlg.cpp (kserver_get_port): New.
        (save_default_ks): Save port.
        * wptKeyserver.cpp (set_default_kserver): Get port or use default.
        (kserver_connect): Logging.
        (kserver_send_request): Likewise. Thanks to Markus.
        * wptError.cpp (w32_fmt_msg): New.
        (winpt_strerror): Show the W32 API error if the hotkey could not
        be registered.

2005-01-20  Timo Schulz  <[email protected]>

        * wptKeycacheDlg.cpp (keycache_dlg_proc): Be less strict with the
        keyring check. If the file exists, it is enough.
        * wptKeyring.cpp (kserver_load_conf): Use C++ new for proxy_host.
        Several cleanups and allow to specify the port of the keyserver.
        * wptMainProc.cpp (winpt_main_proc): Handle WM_CLOSE to make sure
        the application terminates clearly when Windows shutdown.

2005-01-10  Timo Schulz  <[email protected]>

        * WinPT.cpp (load_gettext): New.
        (WinMain): Use it here to load it before --keymanager. Thanks to Ralf.

2005-01-08  Timo Schulz  <[email protected]>

        * Applied the patches to make the source G++ compatible.
        * wptKeyserver.cpp (kserver_load_conf): Use the stripped string.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Default key size is now 2048.
        * wptFileManagerDlg.cpp (fill_drive_combobox): Do not add CD-Roms.

2005-01-07  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (skip_type_prefix): Support all URL schemes.
        (finger_recvkey): Use skip_type_prefix and prevent buffer overflows.
        (ldap_recvkey): Likewise.
        (check_hkp_response): Be more liberal with error strings.
        (kserver_connect): Prevent buffer overflow and use the right return
        code for inet_addr().
        (kserver_search_chkresp): New.
        (kserver_search): Fixed. Now it works with modern keyservers.
        * wptKeylist.cpp (seclist_init): Add new flags param.
        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Use short secret key
        listing.
        * wptClipboardSignEncDlg.cpp (clip_signenc_dlg_proc): Likewise.
        * wptMainProc.cpp (winpt_main_proc): GPGME cleanup.
        * WinPT.cpp (WinMain): call GPGME init.
        Reword the 'you have no keyring' problem and revamp the first run dialog.
        * wptGPG.cpp (gnupg_access_keyring): New.
        (gnupg_check_keyring): Removed unused code.
        * wptFirstRunDlg.cpp (first_run_dlg_proc): Adjust dialog for the 
        new texts and remove unused elements.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): s/keyserver/kserver. The
        last annoying typo.
        * wptKeyserverSearchDlg.cpp (hkpsearch_dlg_proc): End dialog in case of
        an error.

2004-12-30  Timo Schulz  <[email protected]>

        * wptKeyserverDlg.cpp (keyserver_list_build): Initialize pointer.
        This fixes the problem that the dialog crashes when the user selects
        anything. Thanks to my users.
        (keyserver_dlg_proc): s/keyserver/kserver. Thanks to Ulf.
        
2004-12-20  Timo Schulz  <[email protected]>

        * wptGPG.cpp (check_gnupg_engine): Fixed version checking.
        * wptFileManager.cpp (fm_encrypt): Delete the passphrase from the
        cache if it is not valid.
        
        Fix problem with a NULL pointer.

2004-12-15  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (space_wipefrees_dlg_proc): Use the right
        temp name.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Disable 'OK' button
        when no secret key is available.

2004-12-11  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_add_opened_files): Fix broken code to detect
        the file type.
        (fm_parse_command_line): Likewise.

2004-12-02  Timo Schulz  <[email protected]>

        * wptKeySigDlg.cpp (do_load_keyprops): Only issue errors for non-main nodes.

2004-11-04  Timo Schulz  <[email protected]>

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Support preferred
        keyserver sub packets.

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Set a flag to
        indicate we need to reload the cache. If a user deletes a key
        and exits the manager and loads it again the deleted key is
        still in cache and provoked an error.
        
        * wptKeySigDlg.cpp (do_load_keyprops): Stricter key checks.

        * wptW32API.cpp (center_window): Replaced with real code which calculates
        the position relative to the desktop window.

2004-10-25  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Issue an info box
        if the PGP message is complete but broken during the transport.
        Thanks to Werner and Achim.
        * wptFileManager.cpp (fm_sym_encrypt): Do not force CAST5. Thanks
        to the gnupg-users.
        * Automatically add '\r\n' to the text before signing. This solves
        the problem the last line is not included if no \r\n is present.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Add a 'mail quote' mode
        which prepends the text with '> '. This makes it easier to quote
        decrypted text.
        * wptKeyserverDlg.cpp (keyserver_list_build): Code which was factored
        out from..
        (keyserver_dlg_proc): ..here.

2004-10-15  Timo Schulz  <[email protected]>

        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Make sure that opt
        is really initialized.

2004-10-07  Timo Schulz  <[email protected]>

        * wptErrors.cpp (winpt_errmsg): Use a generic header when no
        filename is supplied.
        * wptMainProc.cpp (cleanup_tmp_files): Do not use BUG but
        an error message which is more clean. Thanks to Ralf.
        * wptCardDlg.cpp (card_keygen_dlg_proc): Support new card
        admin mode.
        * wptKeySignDlg.cpp (do_check_protection): Also check for smart
        card protection.
        (get_keyinfo): Return if this is a smart card key.
        * wptKeyEditDlgs.cpp (do_find_userid): Use UTF8 encoding before
        comparing the names.
        * winpt.cpp: Now depends on PTD 0.7.1.

2004-10-01  Timo Schulz  <[email protected]>

        * wptClipSignDlg.cpp: Really use the selected subkey with the
        right '!' syntax. Thanks to Vedaal for pointing this out.
        * wptGPG.cpp (gnupg_backup_keyrings): Check if the backup device
        is accessable and writeable, otherwise inform the user. Kudos to
        the one who reported this problem.

2004-09-20  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Disable 'Sign' in
        context menus when the key is flagged as revoked.
        (update_ui_items): Likewise and set the 'ShowPhoto' flag only if 
        the key has such an item.

2004-09-08  Timo Schulz  <[email protected]>

        * wptKeyserverDlg.cpp (kserver_get_pos): If only one element is
        in the list, return zero.

2004-09-07  Timo Schulz  <[email protected]>

        * wptAboutDlg.cpp (about_dlg_proc): Add 'Help' button. Suggested by Ralf.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Likewise.

2004-09-01  Timo Schulz  <[email protected]>

        * wptGPG.cpp (GPG_CONF): Define it. Use gpg.conf by default.
        (default_key_from_cache): Use new key attribute 'usable'.
        * WinPT.cpp (show_unprotected_keys): Removed.
        * wptKeylist.cpp (check_key): Removed.
        (seclist_init): Use new 'usable' key attribute.
        (keylist_add_key): Likewise.
        * wptKeyManagerDlg.cpp (keylist_subclass_proc): support to
        add keys via 'INSERT'.
        * wptListView.cpp (listview_select_one): New.
        (listview_find): New.
        * wptFileManager.cpp (fm_get_current_pos): If there is only
        one item, return 0 but also select it. Thanks to Christian.

2004-08-28  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Free gpg table in case of an error.
        * wptFileManagerDlg.cpp (filelist_subclass_proc): New.
        (filemanager_dlg_proc): Subclass the list control.
        * Fix Alt+C for the winpt_prefs_dlg_proc.
        * wptKeyserver.cpp (kserver_load_conf): Ignore lines with
        just whitespaces. Thanks to the folks on winpt-users.

2004-08-27  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (skip_whitespace): New.
        * Fix a problem with the key cache. The new hash item was
        not initialized to zero and thus the free caused an illegal access.
        Thanks to Ralf for pointing this out.
        * wptTextInputDlg.cpp (text_input_dlg_proc): Finished with localisation.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Likewise.
        * wptFirstRunDlg.cpp (first_run_dlg_proc): Remove global variable and
        use a context to store the value. Loalize all text strings.
        * wptKeyList.cpp (key_check_validity): Cannot use gettext here.
        (keylist_get_recipients): Increase buffer for gettext messages.

2004-08-26  Timo Schulz  <[email protected]>

        * WinPT.cpp (load_keyserver_conf): New. Factored out some code
        from WinMain ().
        (WinMain): Load keyserver config at the begin. Thanks to Bodo Aßner
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): If there is no keyserver 
        in the list control, add at least the internal default HKP server.
        * wptKeygenDlg.cpp (keygen_wizard_dlg_proc): NLS support.
        * wptKeySignDlg.cpp (sig_class_dlg_proc): Likewise.
        (keysign_dlg_proc): Likewise.
        * wptKeySigDlg.cpp (keysig_dlg_proc): Likewise.
        * wptKeyserver.cpp (skip_type_prefix): New. Thanks to Marcus Junk.
        (kserver_connect): use it here.
        (kserver_send_request): Likewise.
        (kserver_recvkey): Likewise.

2004-08-25  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_get_file_type): Skip files over 32 MB
        and skip to read large files on floppy discs.
        (fm_wipe): Display a 'wait' cursor until the wipe is complete.
        (is_floppy_disc): New.
        * wptFileManagerDlg.cpp (filelist_subclass_proc): New.
        (file_manager_dlg_proc): Use subclassing to allow some hotkeys.

2004-08-24  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (userid_list_init): Add creation date for
        the user-ids.
        * wptKeygenDlg.cpp (key_wizard_dlg_proc): Allow to switch into
        expert mode when the non-interactive mode is used.
        * WinPT.cpp (WinMain): Start the keygen wizard instead of the
        expert dialog and allow to switch to it.

2004-08-20  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (do_create_minpopup): In read-only
        mode the menu is not available.
        (popup_gpg_readonly): New.
        (menu_gpg_readonly): New.
        (keymanager_dlg_proc): Use it here. Do not check the permissions
        any longer since this is now handle via the read-only code.
        * wptMainProc.cpp (winpt_main_proc): Check if the keyrings
        are in read-only mode.
        * wptKeyGenDlg.cpp (keygen_wizard_dlg_proc): RSA support.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Allow non-revocably
        signatures in expert mode.
        * wptKEyEditDlgs.cpp (do_find_userid): Release context.
        * wptGPG.cpp (gpg_check_permissions): Only print out a warning
        in the interactive mode.
        * wptTrayPopDlg.cpp (WndProc): Destroy the window when the left
        mouse button is clicked.

2004-08-19  Timo Schulz  <[email protected]>

        * wptKeyEditDlg.cpp (keyedit_addsubkey_dlg_proc): Corrected
        key numbers.

        * wptKeysigDlg.cpp (do_delsig): New. Implement 'delsig' command.
        (is_sig): Change code to allow to check pre-defined fields.

        * WinPT.cpp (WinMain): Allow read-only support for keyrings.

2004-08-06  Timo Schulz  <[email protected]>

        * wptContext.h: Move subclass_s context to this file.

        * wptKeysigDlg.cpp (subclass_dlg_proc): New.


2004-08-05  Timo Schulz  <[email protected]>

        * wptKeySigDlg.cpp (sigprops_dlg_proc): Set the 'expired' flag
        when possible.
        New dialog layout to enhance the readability of the text. Use
        flat check boxes for the same reason.

        * wptKeyEditDlgs.cpp (do_editkey_expire): Set new value to
        the right column (3 not 4).

        * wptFileManagerDlg.cpp: Make sure the wipe freespace tempfile
        uses a unique name.


2004-08-04  Timo Schulz  <[email protected]>

        * wptClipEditdlg.cpp (clip_edit_dlg_proc): Removed the
        edit-field to display the text. Now a RichEdit field is
        used. This solves the XP problem that the viewer is empty
        even if there is text in it.

        * wptKeyManger.cpp (km_file_export): Add WinPT specific comment.

        * wptKeySigDlg.cpp (sigprops_dlg_proc): New.
        (keysig_dlg_proc): Add new 'Properties' button and implement
        the code for it.

        * wptSigList.cpp: Add support to show the expiration date.

        * wptGPGME.cpp (keycache_init): Support to show the progress bar.
        (keycache_release): Store the amount of keys in the registry for
        the progress dialog.

        * wptPreferenceDlg.cpp (prefs_dlg_proc): Add support to generate
        default keyserver.conf.

        * wptKeyserver.cpp (kserver_load_conf): Store the mod-time of the file.
        Fix possible buffer overflow.
        (wsock_end): Release stored keyserver list.

        * wptEncryptDlg.cpp (clip_encrypt_dlg_proc): Allow to search for
        a specific recipient and select it.

2004-08-02  Timo Schulz  <[email protected]>

        * wptKeysigDlg.cpp (do_create_popup): New.
        (do_load_keyprops): New.

        (keysig_dlg_proc): Factor out some common code and use
        do_load_keyprops.

        * wptKeyServer.cpp (kserver_check_inet_connection): New.

        * wptKeyManger.cpp (km_refresh_from_keyserver): First check
        for an active internet connection. It's annoying for the
        user to confirm an connection error for each key (n>40).

2004-07-27  Timo Schulz  <[email protected]>

        * wptKeyManagerDlgProc.cpp (keymanager_dlg_proc): Set the new
        value for the ownertrust.

        * wptKeyManager.cpp (get_key_trust): Make it public.
        (get_key_trust_str): New.
        (km_refresh_from_keyserver): Allow to select random keys.
        (km_refresh_one_key): New.

        * wptKeyserver.cpp: Use default keyserver if possible.

2004-07-13  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_assume_onepass_sig): New.
        Thanks to Vedaal who found out that armored one-pass sigs are not
        correctly recognized.

        (ask_filename): New.
        Again thanks to Vedaal who suggested to ask for a new output name
        for the case the user does not want to overwrite the file.

        (fm_encrypt): Use it here.
        (fm_decrypt): Likewise.
        (fm_sign): Likewise.

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): New context menu entry
        to set secret keys to ultimate trust.   

        * wptKeyManager.cpp (km_check_for_seckey): Optionally return if the
        key has ultimate trust.
        (km_set_implicit_trust): New.

2004-07-12  Timo Schulz <[email protected]>

        * wptRegistry.cpp: Support for disable compression of multi-media files.
        (set_reg_winpt_single): New.
        (get_reg_winpt_single): New.

        * wptFileManager.cpp (is_multi_media): New.
        (fm_encrypt): Disable compression of multi-media files.
        (fm_state_new): Set comment to indicate armored files were generated
        by WinPT. This is a replacement due to the fact the WinPT string is not
        added in the 'Version' for larger files.

        * WinPT.cpp (WinMain): Extract the loadimage.exe from the DLL if not found.

2004-07-11  Timo Schulz  <[email protected]>

        * Bug fix for the validity revoked status. Now it is 'revoked'
        and not 'unknown' any longer.

        * Feature to disable encryption. This might be useful for filetypes
        GPG does not recognize as compress (movies, ...).

        * wptFileManager.cpp (fm_get_file_type): Skip packet detction if
        the file is large and it has no openpgp extension.

2004-06-19  Timo Schulz  <[email protected]>

        * wptInet.cpp: Renamed to ...
        * wptHttp.c: ... this.
        * wptKeyManager.cpp (km_http_import): Release 'p' not too early.
        * WinPT.cpp (WinMain): If there is a problem with the homedir,
        jump to the first start settings.

2004-06-12  Timo Schulz  <[email protected]>

        * wptInet.cpp: Updated.
        * wptKeyManager.cpp (km_http_import): Use http_send_request2() to
        parse the URL.
        * wptCommonDlg.cpp (http_file_dlg_proc): New.
        (get_http_file_dlg): New.

2004-06-08  Timo Schulz  <[email protected]>

        * wptInet.cpp: New.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Support for http
        transfers.
        * wptKeyManager.cpp (km_http_import): New.


2004-06-02  Timo Schulz  <[email protected]>

        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Do not issue an error
        if there is no clipboard data.

        Release memory in case of an error.

        * wptKeyManager.cpp (keylist_cmp_cb): Allow to sort by algorithm.

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Likewise.


2004-05-31  Timo Schulz  <[email protected]>

        * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Implement the
        'X' close button. Noted by a friendly user.
        
        Disable 'Save' button.

        * wptMainProc.cpp (cleanup_tmp_files): Delete all related temp files.

        * wptFileManager.cpp (fm_set_status): Do not use the data file name
        for signatures but keep the original file name.

        (fm_verify_pasted_detsig): Try to verify detached signatures from
        the clipboard.

2004-05-14  Timo Schulz  <[email protected]>

        * WinPT.cpp (check_crypto_engine): Due to some
        internal  GPG changes the min. version for smart card
        support is now 1.3.6.

        * wptProxySettingsDlg.cpp (read_proxy): Correct prefix
        handling. Thanks to the folks who reported this via SF.net.

        * wptRegistry.cpp (get_reg_winpt_prefs): Corrected enum ids.
        Thanks to the folks on winpt-users who reported it.

        * wptPreferencesDlg.cpp (prefs_dlg_proc): Fix code in case of
        the hotkeys are disabled. 

        * wptKeylist.cpp (do_addkey): Broken ElGamal dection, fixed.

        * wptFileManager.cpp (fm_get_file_type): Do not parse the entire
        file if the size is >= 256MB.

2004-03-15  Timo Schulz  <[email protected]>

        * Decrypt list box has now a vertical scroll bar.

2004-03-11  Timo Schulz  <[email protected]>

        * The DLL is now complety C-source.

2004-03-08  Timo Schulz  <[email protected]>

        * wptGPG.cpp (gnupg_import_keyrings): cleanups.

        * wptUTF8.c (utf8_to_wincp): New. Directly convert UTF-8 to Windows
        CP.
        (wincp_to_utf8): Likewise.
        (conv_charset): Now internal and static.

        * wptUTF8.h: New prototypes and remove the old prototypes.

        * WinPT.cpp (WinMain): Destroy the windows handle in case of an error.


2004-03-07  Timo Schulz  <[email protected]>

        * wptGPG.cpp (get_gnupg_keyring): Special case because GPG creats
        dummy keyrings with a size of zero in the homedir.

        (gpg_check_permissions): Check for read-only keyrings and add code
        for this case.

        This problem fixes a lof of other problems related to the OpenPGP
        parsing stuff for the key cache.

        * WinPT.cpp (check_crypto_engine): Store the GPG version for later use.

2004-03-04  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (finger_recvkey): Error if key was not found
        or garbled.

        * wptGPG.cpp (gpg_check_permissions): Take care of the entries
        in gpg.conf.

        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Support to select
        the signer. Suggested by Sebastian.

        * wptKeylist.cpp (seclist_init): Moved from the clip dialog file to
        this file.
        (seclist_free): Likewise.
        (seclist_select_key): Likewise.

        * wptFileManager.cpp (fm_encrypt): Handle the case the signer was
        already set.

2004-03-02  Timo Schulz  <[email protected]>

        * wptGPG.cpp (check_keyring): Handle the case that the keyring
        is set in the gpg.conf file and the pubring.gpg file is zero bytes.

        (gnupg_backup_keyrings): Support backup of keyrings which were set 
        in gpg.conf. Thanks to the user who reminded me of this problem.

        (gnupg_check_file_ext): Make check not case sentensive.

        * (sfree_if_alloc): Overwrite the memory with zeros before freeing
        it. This only works with c-strings! Use it everywhere we handle
        sentensive information (passphrases).

        * Try to improve the usability with better menu names and new
        ordering.

        * wptKeyMangerDlg.cpp: Make the 'Trust' column sortable.

        * wptMainProc.cpp (winpt_main_proc): Removed GPG about dialog. Now
        it is part of the WinPt about dialog. This way we can minimize the
        elements in the popup menu.

2004-02-29  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Support throw-keyid.

        * wptKeySignDlg.cpp (do_fill_seckeylist): Make sure we skip key itself
        so we are not allowing to sign ourself.

        * wptSigList.cpp (siglist_add_key): Support for the signature 
        flags (local, non-revocably, ...).

        * Key signing with GPG 1.2.x should work again. Hopefully.

2004-02-26  Timo Schulz  <[email protected]>

        * wptFileManagerDlg.cpp (file_encrypt_dlg_proc): Issue an error
        if no recipient was selected.

        * wptFileManager.cpp (fm_parse_files): Make sure the progress dialog
        is destroyed. This fixes the bug that the dialog sometimes exist even
        after the procedure ended.

        * wptProgressDlg.cpp (progress_callback): Change the if-then-else
        struct to prevent zombie dialogs.

        * wptKeyserver.cpp: Removed unused prototypes.

2004-02-25  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp: Use consequently 'List Signatures' and
        do not mix the names in the different menus.

        * wptSigList.cpp: Support to show the signature class.

        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Disable the combo
        box when there is no secret key available.

        (do_init_keylist): Do not allow to use the owners key as a desig
        revoker.

        * wptKeylist.cpp (get_key_trust): New.
        (do_addkey): Use it here.

2004-02-24  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Call a selftest check procedure to
        make sure all cryptographic code works as expected.

2004-02-22  Timo Schulz  <[email protected]>

        * PTD: Cryptdisk seems to have problems with locking. Use
        a forced flag to tell the code if it should bail out or 
        ignore locking errors.

        * wptCryptdisk.cpp (cryptdisk_umount_dlg_proc): Use new
        locking code.
        (cryptdisk_new_dlg_proc): Adjust size of the volume.

2004-02-21  Timo Schulz  <[email protected]>

        * wptCryptdisk.cpp (cryptdisk_cleanup): New.
        (is_nt4): Because my Platform-SDK is too old I need to load
        some prototypes dynamically.
        (init_drives): Return the first useable drive letter if
        called with appropriate parameters.
        * wptMainProc.cpp (winpt_main_proc): Use it here.

2004-02-18  Timo Schulz  <[email protected]>

        * Modify the cryptdisk code for crosscrypt 0.4.1.
        * wptCryptDisk.cpp (do_mount): Add key algorithm param.

2004-02-17  Timo Schulz  <[email protected]>

        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Also encrypt
        to the signers key. Suggested by Alexander.
        Use new keycache system, we use the public key part of the
        cache because it has all flags set.
        * wptGPG.cpp (default_key_from_cache): Use new cache system.
        * wptKeySignDlg.cpp (do_fill_seckeylist): Likewise.


2004-02-12  Timo Schulz  <[email protected]>

        * wptErrors.cpp: New error codes for the cryptdisk feature.
        * wptCryptdisk.cpp (do_dispatch): Better error handling.
        (cryptdisk_mount_dlg_proc): Use it here.
        (cryptdisk_umount_dlg_proc): Likewise.
        (init_drives): Use system list.

        Localized all strings.

2004-02-09  Timo Schulz  <[email protected]>

        * wptCryptdisk.cpp (cryptdisk_umount_dlg_proc): New.
        (do_reaping): New. Release the list if all items are 'expired'.
        (cryptdisk_mount_dlg_proc): New.
        (init_drives): New.
        * wptMainProc.cpp (cryptdisk_proc): Renamed from...
        (handle_cryptdisk): this. And filled with life.

2004-02-08  Timo Schulz  <[email protected]>

        * wptCryptdisk.{cpp,h}: New. Support for the extended
        filedisk application.
        * wptMainProc.cpp (winpt_main_proc): Likewise.
        * WinPT.cpp (WinMain): Make sure the new PTD lib is installed.

2004-02-05  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (set_reg_winpt_prefs): Forget to handle
        CMD_DISHOTKEYS. Thanks to the user who reminded me.
        * wptMainProc.cpp (spawn_cryptdisk): New interface to
        the Cryptdisk application.

2004-02-04  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (get_reg_winpt_prefs): Revamped the core.

2004-02-03  Timo Schulz  <[email protected]>

        * WinPT.cpp (check_crypto_engine): New. Factor out common code.
        (WinMain): Check the crypto engine after the first start.

        * wptRegistry.cpp (set_reg_winpt_prefs): Make sure an error is
        issued if the values could not stored. Revamped the core.

        * Removed the last appearance of the GPG agent support.

        * wptGPG.cpp (init_gnupg_table): Do not use static buffers.
        (free_gnupg_table): Free memory.

        * wptClipImportDlg.cpp (clip_import_dlg_proc): Make sure the
        ctx pointer get malloced and set the contents to zero.


2004-02-02  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_keygen_dlg_proc): Make sure the name
        is long enough. The same check for the mail address.

        Thanks to Achim.

2004-01-28  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_keygen_dlg_proc): A info is issued
        if keys on the card exist but the user does not said overwrite.

        Make sure the expire date is not in the past.

        * wptMainProc.cpp (winpt_main_proc): Avoid to release the file
        lock twice. Not sure if this fixes some other problems but it
        was definitely a bug.

        * wptMapi.cpp (mapi_init): Make sure all function ptrs are
        initialized otherwise bail out.
        (mapi_send_message): New. Interface to allow to send an 
        encrypted mail with zero ore more encrypted attachments.
        (secure_attachment): New.
        (parse_recipients): New.

2004-01-25  Timo Schulz  <[email protected]>

        * WinPT.cpp (WinMain): Silently die when an instance is already
        running. Do not confuse the user with a message. Suggested by
        Sebastian.
        * wptKeyManager.cpp (delete_keys_from_cache): New.
        (km_delete_keys): Use it here. Thanks to Achim.

2004-01-23  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (check_pin_len): New. Check if the
        PIN is long enough and give an appropriate error.
        (card_changepin_dlg_proc): Use the new check function.

2004-01-22  Timo Schulz  <[email protected]>

        * Remove all internal card reader config. It's up to the
        user to do this. It would be too error proune to offer it.
        * wptCard.h: Removed all card driver stuff.
        * wptPinDLG.cpp (pin_cb_dlg): Use better names to differ
        between the admin and the user (normal) PIN.

2004-01-04  Timo Schulz  <[email protected]>

        * wptImageList.{cpp,h}: New. Contributed by Andreas Jobs.
        * wptKeylist.cpp (keylist_cmp_cb): More patches from Andreas
        and minor changes.
        * wptListView.cpp (listview_sort_items): Likewise.
        * wptKeyManager.cpp (key_manager_dlg_proc): Likewise.
        (regist_sep_wnd): Factored out some code.

2004-01-03  Timo Schulz  <[email protected]>

        * wptClipImportDlg.cpp (clip_import_dlg_proc): automatically allow
        to import secret keys.

2003-12-31  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (keyedit_addsubkey_dlg_proc): Do not sort
        the list otherwise the index is wrong.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Add the ability to set
        a signature expire date.

2003-12-30  Timo Schulz  <[email protected]>

        * fixed the GPG edit-key commands sign and addrevoker.

2003-12-23  Timo Schulz  <[email protected]>

        * wptKeyEditAddKEyDlg.cpp (keyedit_addsubkey_dlg_proc): Remove
        ElGamal s+e support. Oops, this should be already done.
        * wptGPGME.cpp (keycache_init): Sync both key caches. In other
        words transfer some flags from the sec-cache to the pub-cache.
        * wptKeySignDlg.cpp (key_sign_dlg_proc): A workaround for the
        key sign procedure. If it is already signed, the process 
        sometimes hangs.

2003-12-14  Timo Schulz  <[email protected]>

        * wptKeyeditSetPrefDlg.cpp (get_userid_preflist): New.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Support for updpref.
        (do_editkey_setpref): Implement updpref command.


2003-12-10  Timo Schulz  <[email protected]>

        * GPGME support to change key preferences.
        * wptKeyeditSetPrefDlg.cpp (keyedit_setpref_dlg_proc): New.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Use the new feature here.


2003-11-29  Timo Schulz  <[email protected]>

        * wptMAPI.cpp (mapi_init): New.
        (mapi_deinit): New.
        (mapi_send_pubkey): New.
        * wptKeyManager.cpp (km_send_to_mail_recipient): New.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Support
        to send the public key via MAPI to a recipient.
        * wptKeySignDlg.cpp (do_fill_seckeylist): Make sure we rewind
        the secret key cache so it's not at the end.
        (keysign_dlg_proc): Issue a warning when no secret key was
        found which could be used for signing the key.
        * wptKeylist.cpp (do_addkey): Never add an Elgamal sign+encrypt key.
        * wptKeySignDlg.cpp (do_fill_seckeylist): Likewise.

2003-11-28  Timo Schulz  <[email protected]>

        * Remove all support for ElGamal sign+encrypt keys.

        There is a flaw in GPG which makes all such keys useable and
        they are comprised even if one signature they made is accessable.
        And due to the fact the key is self signed, such a sig is always
        available for the public.

        We warn the user at startup if such keys were found!

        * wptMainProc.cpp (elgamal_warn_dlg_proc): New.
        * wptGPGME.cpp (count_insecure_elgkeys): New.
        * WinPT (WinMain): Use it here.

2003-11-14  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_edit_dlg_proc): Release the second PIN.

2003-11-13  Timo Schulz  <[email protected]>

        * Clarify pin names. Now all PIN's are labeled 'Admin' or 'User'.
        * wptPINDlg.cpp (pin_cb_dlg_proc): Length check for the PINs.
        Thanks to Achim.
        * Change PIN interface. Now it is easier when an operation requires
        both PINs.
        * wptCardDlg.cpp (do_proc_card_cmds): Now GPG requires both PINs
        to change card attributes. Do not ask me why, but now the user
        needs to enter 2 PINs.

        Name parts were swapped, now they have the right order again.

2003-10-02  Timo Schulz  <[email protected]>

        * Prepare test release.
        * wptGPGCmds.h: New from GPG 1.3.4-cvs.

2003-10-29  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp: New logging scheme. Changed all callers.

        * Create a new interface for an interactive card callback. GPG
        provides card control status messages if the wrong card is inserted.

        * wptCardManager.cpp (card_cb_dlg_proc): New.
        (card_callback): New.

        * wptCardPCSC.cpp (pcsc_loadlib): Use some 'A' to declare we use
        the ASCII functions and not the Unicode function names. Thanks to
        Werner for pointing this out.

        * wptPassphraseCB.cpp (passphrase_cb): Better card interface. Now the
        serial card number is shown to help the user to find the right card.

        * wptClipSignDlg.cpp (clip_sign_dlg_proc): New logging scheme.

2003-10-26  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Implement new logging.

        * Changed the code at several other places to support the new logging
        scheme.


2003-10-24  Timo Schulz  <[email protected]>

        * Implemented a better logging system. If the return code
        of GPG is != 0 and the error is not known, display the errors
        from stderr.

        * wptGPGME.cpp (logging_cb): New.

2003-10-23  Timo Schulz  <[email protected]>

        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Show GPG output
        if the error is unknown.
        (clip_sign_dlg_proc): Likewise.
        (clip_signenc_dlg_proc): Likewise.
        (clip_import_dlg_proc): Likewise.

2003-10-21  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (list_recipients): New.
        (algo_from_list): New.
        (clip_decrypt_dlg): New concept to list all recipients.
        * wptFileManager.cpp (fm_list_keys): New.
        (fm_decrypt): Same changes as for the clipboard decryption.

2003-10-21  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): If the passphrase
        was wrong, delete the cache item (if available).
        * wptClipSignDlg.cpp (clip_sign_dlg): Likewise.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg): Likewise.
        * wptPassphraseCB.cpp (set_gpg_passphrase_cb): Set 'is_card'
        flag to zero.
        

2003-10-19  Timo Schulz  <[email protected]>

        * wptPINDlg.cpp (pin_cb_dlg_proc): Support to store the admin and
        the working PIN.
        wptCardDlg.cpp (free_pincb): New.
        (card_keygen_dlg_proc): Pin callback implemented.
        Simple check for the e-mail address.
        (card_edit_dlg_proc): End the dialog if no changes were made.

        * Expanded GPGME passphrase interface to work both with PINs
        and passphrases.

2003-10-18  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_keygen_dlg_proc): New.
        (do_askpin): Handle the case there is no card.
        (card_edit_dlg_proc): Add 'New Keys' feature.
        (card_changepin_dlg_proc): Implemented.
        * WinPT.cpp (WinMain): Ability to start the card manager directly.
        * wptMainProc.cpp (smartcard_init): Global stuff to init the reader
        driver and the inserted card.

2003-10-17  Timo Schulz  <[email protected]>

        * wptGPGME.cpp (keycache_init): Do not use secring the first time.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Make sure only the short
        keyid will be displayed.        

2003-10-16  Timo Schulz  <[email protected]>

        * Changed GPGME interface for edit card. Now one context is
        used for all edit card operations.
        * wptCardDlg.cpp (card_edit_dlg_proc): Support for working
        and admin PIN. Changed gpgme interface.
        (ask_pin): Renamed to..
        (do_askpin): this. Provide more information about the card
        and its holder.
        (do_proc_card_cmds): If no error, reset modify flags for
        all controls. Show a short message that the operation ended.
        * wptCardPCSC.c (pcsc_free_readers): New.
        (pcsc_scan_readers): New.
        (pcsc_get_reader): New.
        (pcsc_get_card_status): New.


2003-10-14  Timo Schulz  <[email protected]>

        * wptKeyList.cpp (do_addkey): Add the case the secret key
        is stored on a smart card.
        (km_check_for_seckey): Take care of the new code.
        * wptKeyManager.cpp (km_delete_keys): Extra warning when
        the secret key is stored on a card.
        * wptKeyEditDlgs.cpp (subkey_list_init): Add the key cabilities
        to the list view. Now the user can see if the key is useable
        for: signing, certifying or encrypting.

2003-10-13  Timo Schulz  <[email protected]>

        * Extended the GPGME API that it is possible to retrieve
        the key data. This is for the planned card login but it
        might be also useful for other purposes.

        * wptCardPCSC.c: New. General code for PC/SC card readers.


2003-10-12  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (guess_libname): New.
        (card_status): Simplified the code with an attribute
        table. Now it is a loop and not hard coded.
        * The card interface has changed. Now the surname and
        the given name are two fields and not one field.
        * wptMainProc.cpp (winpt_main_proc): Check if the card
        reader is configured where appropriate.

2003-10-09  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (get_card_status): New.
        (show_card_status): New. Retrieve the card status and show an
        error if approprioate.
        * Make sure that WinPT does not try to use non-OpenPGP cards.
        * Add GPGME support for the forthcoming AUTH flag for keys.
        * Implemented the detection of keys where the secret key components
        are stored on a smart card.


2003-10-08  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (do_proc_card_cmds): Check that only US-ASCII
        is used. Otherwise reject the value.
        (ask_pin): New. Enable PIN caching for the 'dialog session' so
        the user does not need to re-enter it again and again.

2003-10-07  Timo Schulz  <[email protected]>

        * wptPINDlg.cpp (pin_cb_dlg_proc): New.
        * wptCardDlg.cpp (do_proc_card_cmds): New.
        (card_edit_dlg_proc): Use it here.

2003-10-06  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_encrypt): Wipe files in both modes.
        * wptGPG.cpp (gnupg_display_error): Display general error
        when the file does not exit.
        * wptW32API.cpp (get_folder_dlg): New.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Ability to select
        the folder for the home directory.
        * wptKeyManager.cpp (km_update_default_key_str): Return length
        of the string.
        (km_complete_status_bar): Use the offset of the default
        key string so it is not appened twice.
        * wptRegistry.cpp (regist_inst_winpt): Create 'Card' subkey.
        * wptCard.h: New.
        * wptCardDlg.cpp (new_card_driver): New.
        (load_card_driver): New.
        (free_card_driver): New.
        (card_config_dlg_proc): If the reader is configured, load the
        values. This is needful to change the driver later.
        (gpg_load_scard): Use driver as a parameter.
        * wptMainProc.cpp (winpt_main_proc): Load card driver and
        unload it after use.

2003-09-28  Timo Schulz  <[email protected]>

        * wptCardDlg.cpp (card_edit_dlg_proc): New.
        (gpg_load_scard): New. Try to use GPG load the card info.
        (print_fpr): New. Print beautified fingerprint.
        (card_status): New. Set all dialog fields with the values from
        the card.
        (prepare_dialog): New. Load combo boxes with pre-defined strings.


2003-09-25  Timo Schulz  <[email protected]>

        * wptProgressDlg.cpp (progress_cb_thread): New.
        (progress_callback): Use asynchron code.
        * wptFileManager.cpp (fm_parse_files): Implement progress callback.


2003-09-25  Timo Schulz  <[email protected]>

        * wptClipSignEncDlg.cpp (seclist_dlg_proc): The dialog was broken.
        (check_key): New.
        Removed the old Secret Key List dialog. Now the key can be directly
        chose in the dialog.
        (seclist_init): New.
        (seclist_destroy): New.
        (seclist_select_key): New.
        * wptFileManager.cpp (fm_sign): Ask for output file if needed.

        * Client side implementation of the --enable-progress-filter feature.

        * wptProgressDlg.cpp: Server side implementation.
        (progress_dlg_proc): New. The actual dialog procedure.
        (progress_callback): The GPGME wrapper callback.

2003-09-24  Timo Schulz  <[email protected]>

        * wptKeygenDlg.cpp (keygen_dlg_proc): Implement 'Hide Typing' feature.
        * wptFileManager.cpp (fm_encrypt): Ask for output file if needed.
        * wptFileManagerDlg.cpp (fm_dlg_proc): Removed im- and export from
        the menu. We use import internally, but export was not useful and
        thus the code were removed.
        * wptPreferenceDlg.cpp (prefs_dlg_proc): Disable some controle at
        startup when they are not allowed.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Removed PGP2 option.
        Make the parsing code much shorter (read).


2003-09-22  Timo Schulz  <[email protected]>

        * wptSigList.cpp (extract_filename): Make sure there is a '\',
        otherwise just dup the string and return.
        * wptVerifyList.cpp (verlist_add_sig): Use a variable for the key
        to make the code more readable.
        * Implemented the GPGME part of the new smartcard interface.
        The WinPT interface will be open until the scard stuff is back
        ported to GPG 1.3.x.
        * wptKeyEditDlgs.cpp (do_editkey_revuid): Need a secret key to do it.
        Several code cleanups.

2003-09-08  Timo Schulz  <[email protected]>

        * wptRegistry.cpp: Remove some hotkeys to correct index calculation.
        (get_reg_winpt_flag): Check buffer first.
        (get_reg_winpt_prefs): Support for the new backup system.
        (set_reg_winpt_prefs): Likewise.
        * wptHotkey.h: Removed import and export hotkey. Re-ordered elements.
        * wptRegistry.h: Cleaned up the hotkey interface.
        * wptPreferenceDlg.cpp (enable_backup_items): New.
        (prefs_dlg_proc): Simplified hotkey handling. Use new code.
        * wptMainProc.cpp (clip_gpg_dlg): Remove hotkey handling for
        im- and export. Use the code directly.
        (currwnd_gpg_dlg): Likewise.
        * wptGPG.cpp (gnupg_backup_keyrings): New.
        (backup_one_file): New.

2003-09-04  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_get_file_type): Due to an unknown reason,
        the packet parsing return value check was wrong again. Now it does
        not recognize Word documents as SECKEY or ENCRYPTED any longer.

2003-09-03  Timo Schulz  <[email protected]>

        * The secret key listing does not contain any 'validity' or
        'status' flags any longer. Thus we only can use the cache to
        make sure we have a secret key. All attributes need to be retrieved
        from the public key listing.

        * wptGPG.cpp (default_key_from_cache): New.
        (get_gnupg_default_key): Use new function to make sure we try
        to get the key from cache if there is a problem with the config
        file.

2003-08-30  Timo Schulz  <[email protected]>

        * wptGPG.h: Support for the GPG status messages REVKEYSIG and
        EXPKEYSIG. With this new feature, GPG 1.2.3 is required.
        * Make sure that the signature status does not cause an
        segfault.
        * WinPT.cpp: Use new check to detect the GPG version and make sure
        it is the minimum.
        * wptGPG.cpp (parse_version_nr): New.
        (check_gnupg_engine): Improved. Now it returns the actual version.

2003-08-24  Timo Schulz <[email protected]>

        * wptPreferencesDlg.cpp (prefs_dlg_proc): Use better code to disable
        dialog controls.

2003-08-17  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc):
        #ID_KEYMISC_EXPORT_PRIVKEY: Retrieve the current list view index. The
        value was malformed.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Free global memory.
        * wptKeyserver.cpp (kserver_load_conf): If the file does not exist,
        don't bother the user with an error message. Closes #782751.
        * wptKeyEditDlgs.cpp (do_editkey_primary): New. Implement the
        "primary" edit key command.
        * wptKeyserverDlg.cpp (hkp_recv_key): New flag parameter. Now it is
        possible to supress the status message. This is useful when the whole
        keyring will be refreshed.
        * wptFileManager.cpp (fm_parse_command_line): Unquote file if needed.
        (quote_file): Avoid double quotes.
        * GPGME support for quoted file names.
        (fm_sym_encrypt): Double check password and to additional 8-bit checks.
        * WinPT.cpp (my_acces): Moved to this file..
        * wptGPG.cpp: ..here.
        (gpg_check_permissions): Renamed from check_permissions and make it global.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Check to make sure we 
        have write access to the keyring for some commands.

2003-07-22  Timo Schulz  <[email protected]>

        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Figure out the size of
        the text instead of allocating the maximum.

2003-07-13  Timo Schulz  <[email protected]>

        * wptKeygenDlg.cpp (check_passphrase): Check if the passphrase contains
        characters >= 127. Due to the fact that we use CP-1250 and GPG uses CP-850
        it would be a bad idea to use such passphrases. And thus we disallow it.
        * wptKeyEditDlgs.cpp (keyedit_change_passwd): Likewise.
        * wptSymEnc.cpp (gpgme_encrypt_symmetric): Likewise.
        * wptHotkey.cpp (hotkeys_strerror): Use capital letters.

2003-07-12  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_verify): Support for multiple signatures.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Likewise.
        * wptProxySettingsDlg.cpp (read_proxy): Skip http:// prefix.
        * wptKeyserver.cpp (check_URL): Support for hkp://. Closes #755156.
        (kserver_connect): Likewise.
        (kserver_read_config): Likewise.
        * wptSymEnc.cpp (gpgme_encrypt_symmetric): Free memory if the passphrases
        are not equal.
        * wptKeyGenDlg.cpp (keygen_wizard_dlg_proc): New. An easy to use wizard to
        generate a key pair.

2003-06-24  Timo Schulz  <[email protected]>

        * Fixed filter code in Get{Open,Save}FileName. Changed all callers.
        Thanks to Alex.
        * wptKeyManager.cpp (km_delete_keys): Quote the user-id.


2003-06-13  Timo Schulz  <[email protected]>

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Quote the user-id name.
        * wptClipSignDlg.cpp (clip_sign_dlg_proc): Fix the code due to
        the fact the signer is now dymanic and not static.
        * wptGPG.cpp (check_gnupg_engine): Check if IDEA is available and 
        change all code that it only shows an error if no plug-in was loaded.
        * wptKeyEditDlgs.cpp (is_cmd_openpgp): Remove REVKEY since you
        can revoke v3 keys.
        (do_editkey_revoke): Clarify command because it can be only used
        for secondary keys.
        * wptKeyManagerDlg.cpp (file_sign_dlg_proc): Make sure an error 
        is issued when no key was selected. Thanks to vedaal.

2003-06-11  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (keylist_add_key): Now the user-ids are in the
        right order and we do not use the last user-id but the first
        because this is always the primary user-id or the newest user-id.
        * wptGPGME.cpp (get_default_keyid): Removed. Some better code
        were added to get_gnupg_default_key.

2003-06-10  Timo Schulz  <[email protected]>

        * wptKeysignDlg.cpp (do_fill_seckeylist): Make sure disabled keys
        are skipped.
        (keysign_dlg_proc): Removed some redundant code.
        * wptKeyEditDlgs.cpp (is_idea_protect_algo): New. Find out if
        it is possible to change the passphrase.

2003-06-06  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (keylist_get_recipients): Use a stronger warning
        message and include the user-id.
        * Encryption: use force overwrite (--yes) to make sure there are
        no complications with GPG.
        * Import: skip all record types we do not understand.


2003-06-05  Timo Schulz  <[email protected]>

        * wptPassphraseCB.cpp (passphrase_callback_proc): Now the dialog
        shows all involved recipients and also the public key algorithm.
        * wptRegistry.cpp (reg_inst_winpt): If the user does not want
        the extensions, set the entry to "1" so the message is not shown
        again.

2003-06-04  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (get_key_algo, get_key_size): Due to the fact
        that GPG uses the newest subkey by default, we always return
        the info of this subkey and not the first.
        * wptKeyImportStatusDlg.cpp (import_status_dlg_proc): Fixed off-by-one
        bug. Now the indicies are correctly.
        * wptGPG.cpp (gnupg_check_keyring): Do not free the value before
        get_file_size is called.
        * WinPT.cpp (WinMain): Only check the GPG engine version if there
        were no problems with the GPG config. And differ between a problem
        to get the version and if a wrong version were detected.


2003-06-01      Timo Schulz  <[email protected]>

        * wptCurrWnd.cpp (rel_key, hit_key): Replaced with macros...
        (KEYDOWN, KEYUP): macros for the functions above.

2003-05-31  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_key_is_v3): Return if the selected
        key is an old PGP 2 (v3) key.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Only allow
        (#ID_KEYMISC_EDITKEY): Bail out if no key was selected.
        to add extented items if the key is NOT version 3.
        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Check if the
        key is v3 and forbid most commands.
        (is_cmd_openpgp): New.

2003-05-28  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_set_clip_info): New.
        * wptKeyManagerDlg.cpp (key_manager_dlg_proc): Use it here.
        * wptImportList.cpp (implist_build): Some column changes for
        the listview control.
        (implist_load): Return if secret keys were found.
        * wptClipImportDlg.cpp (data_cb_dlg_proc): Store if secret keys
        were found.
        (clip_import_dlg_proc): New message if secret keys were found.


2003-05-25  Timo Schulz  <[email protected]>

        * wptImportList.cpp (implist_add_key): Address charset problem.
        * wptVerifyList.cpp (verlist_add_sig_log): Use UTF8 decoding.
        * wptKeyserver.cpp (set_default_kserver): New.
        (wsock_init): Call the new function.
        (kserver_load_conf): If the FP is invalid, skip to read the file.
        * WinPT.cpp (WinMain): Call set_default_kserver to make sure the
        item has a value.

2003-05-24  Timo Schulz  <[email protected]>

        * wptKeyEditDlgs.cpp (keyedit_main_dlg_proc): Subclass the two lists
        to allow to use virtual keys (DEL, INS).
        Release the uid control context when the dialog will be destroyed.


2003-05-22  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Set use_hotkey for current
        window mode sign+encrypt. This fixes a couple of other problems.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Get new values of the
        key when the cache was reloaded.


2003-05-21  Timo Schulz  <[email protected]>

        * wptSiglist.cpp (siglist_add_key): Only list signatures which are
        user-id certificates (0x10-0x13) and ignore key and subkey sigs.
        c-strings are now handle correctly and decoded into GPGME.

2003-05-20  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (key_props_dlg_proc): Factor out code to change
        the passphrase from here to...
        * wptKeyEditDlgs.cpp (keyedit_change_passwd): ...this place.

2003-05-19  Timo Schulz  <[email protected]>

        * wptPasswdDlg.cpp (create_passwd_dlg): Removed.
        (request_passphrase): New.
        The passphrase_s context is now internal, all externl function use now
        request_passphrase. Changed all callers.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Reworded the passphrase
        warning and a check for the comment field was added.
        * wptKeyEditDlgs.cpp: New. This file now combines the dialogs which
        has shown the subkeys and the userids.
        * wptKeySubkeyDlg.cpp: Deleted and stuff merged into wptKeyEditDlgs.cpp.

2003-05-17  Timo Schulz  <[email protected]>

        * wptFileManager.cpp: Moved gpgme_file_get_extension to this file
        and renamed it to...
        (file_get_extension): this. gpgme_control now also returns the
        (get_file_name): Corrected the calculation of the basename.
        state of the command if you use -1 as the value.
        * wptImportList.cpp (implist_load): Make sure we really have the key ID.
        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Some small changes all over
        the place.

2003-05-14  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_enable_disable_key): New.

2003-05-13  Timo Schulz  <[email protected]>

        * wptKeyList.cpp (keylist_add_key): Add 'DISABLED' flag for keys.
        (key_check_validity): Moved from GPGME to this file.
        * wptKeyManager.cpp (km_get_key_status): New.

2003-05-09  Timo Schulz  <[email protected]>

        * wptMDSumDlg.cpp (mdsum_dlg_proc): New.
        * wptFileManager.cpp (fm_print_md): New.
        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Support for the Print MD
        command.

2003-05-08  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Symmetric encryption for the current
        window mode.
        (currwnd_gpg_dlg): Likewise.
        * wptCurrWnd.cpp (wnd_msg_em_set_pos): Fix an off-by-one bug.
        * WinPT.cpp (WinMain): If the default key was not found, show the string
        in the error message to make it easier for the user to fix the problem.
        * wptImportStatusDlg.cpp (import_status_dlg_proc): Take care of secret
        keys.
        * wptfileManager.cpp (fm_get_file_type): Fix packet type detection error.
        This makes the priority of the rc2 update more urgent.

2003-05-07  Timo Schulz  <[email protected]>

        * Clean up the outer GPGME interface. Internal functions should be
        invisible in gpgme.h.
        Merge the photo-id, formerly attribute id stuff with gpgme_key_get_xxx_attr.
        * wptKeyserver.cpp: Some cleanups.
        (finger_recvkey): Skip URL postfix if there.

2003-05-06  Timo Schulz  <[email protected]>

        * wptKeySigDlg.cpp (keysig_dlg_proc): Disable the button when all keys
        are available. Removed old [unused] code.
        Make sure we really have the key in the cache.

2003-05-04  Timo Schulz  <[email protected]>

        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): If invalid recipients
        were found, output a more precise error message. Now the GPGME code
        first tests for special cases and if no one hit the nail on the head,
        a general error is used.

2003-05-03  Timo Schulz  <[email protected]>

        * wptParser.cpp: Renamed to...
        * wptGPGParser.cpp: this.
        (release_option): Renamed to...
        (release_gpg_options): this.
        (commit_option): Renamed to...
        (commit_gpg_options): this.
        (parse_option): Renamed to...
        (parse_gpg_options): this.
        * wptGPG.cpp: Use new parser function names.
        (set_gnupg_default_key): Free memory.
        * wptKeylist.cpp (keylist_add_groups): New group code.
        * wptGroups.{c,h}: Removed. Now we use the GPG group command.
        * wptKeySigListDlg.cpp (keysig_dlg_proc): Change column from
        2 to 4. 
        (recv_missing_keys): Likewise. Now it is possible to retrieve
        missing keys. Thanks to Klaus.
        * wptKeyserverDlg.cpp (hkp_recv_key): Use a dymanic buffer rather
        than a static buffer to avoid garbled keys. There are some very
        large keys and these cause some trouble with a 16k buffer.
        (keyserver_dlg_proc): Localized some strings.
        * wptKeyserverSearchDlg.cpp (hkpsearch_dlg_proc): Use new column
        names which are equal to the names we use in the Key Manager.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Fix a silly '=' but
        should be "==" bug.
        * wptKeygenDlg.cpp (mbox): Removed. Too much overhead.
        * Add --expert option for the GPG procedure call if needed.

2003-05-02  Timo Schulz  <[email protected]>

        * wptW32API.cpp (set_foreground_wnd): Removed. Changed all callers.

2003-04-30  Timo Schulz  <[email protected]>

        * wptKeyManagerdlg.cpp (keymanager_dlg_proc): Support for the
        next context menu ("Add"). Make sure the entries are disabled
        when the key has no secret key.
        * wptKeyEditAddPhotoDlg.cpp (keyedit_addphoto_dlg_proc): New.
        * wptFileManager.cpp (fm_decrypt): Set sig to NULL so it won't
        cause a segfault when the pointer free tries to deallocate the
        pointer.

2003-04-27  Timo Schulz  <[email protected]>

        * wptKeysigDlg.cpp (keysig_dlg_proc): A double click now allows
        to show the properties of the signers keys.
        * wptKeyEditAddRevokerDlg.cpp (keyedit_addrevocer_dlg_proc): New.

2003-04-26  Timo Schulz  <[email protected]>

        * wptParser.cpp: A lot of structural changes. Always add items
        at the end of the list so we don't need to make a copy of the list
        to restore the original order. Fix the group problem.
        * wptKeylist.cpp (keylist_build): Use OR to get the flags and
        not ==.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): The export command
        (file) does not use the keyid as the file name when more than one
        keys were selected.
        Allow allow to set default keys which are not revoked or expired.
        * wptFileEncryptDlg.cpp (file_encrypt_dlg_proc): Allow to sort
        the columns.
        Set the force trust flag in GPGME if there are some recipients
        with no validity.

2003-04-25  Timo Schulz  <[email protected]>

        * wptVerList.cpp (verlist_build): Change the name of some columns.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Instead of just the
        notation (if present!) present the user a general message box
        with extended signature information. This means the notation
        data and a possible policy URL.


2003-04-24  Timo Schulz  <[email protected]>

        * wptKeyEditAddSubKeyDlg.cpp (keyedit_addsubkey_dlg_proc): Init
        default values to make it easier for newbies.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Use a better error
        when no secret key was found. Also mention the public key algo.
        * wptFileManager.cpp (fm_decrypt): Likewise.

2003-04-23  Timo Schulz  <[email protected]>

        * wptKeyPropsDlg.cpp (ownertrust_to_string): Moved the function
        from GPGME#gpgme_ownertrust_to_string into WinPT.

2003-04-20  Timo Schulz  <[email protected]>

        * wptClipboard.cpp: Removed. All these functions and constants
        are now available in MyGPGME/clip.c and thus part of GPGME.
        * wptKeylist.cpp (keylist_add_to_recipients): Renamed to...
        (keylist_get_recipients): this. Return the context instead of
        an argument.
        (get_key_size): Add key index.
        (get_key_algo): Likewise.
        (keylist_build): Use a special mode when signing is used.
        (keylist_enum_recipients): Return a malloced pointer to the
        recipients.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Add primary fingerprint
        when we have a signature result and we do not trust the key.

2003-04-20  Timo Schulz <[email protected]>

        * wptFindWnd.h: Removed. We don't use it any longer.
        * wptGPG.h: Merged GPGERR_xxx constants with WPTERR_xxx.
        (gpg_strerror): Removed. Now it is handled in winpt_strerror.
        * wptFileManager.cpp (fm_get_file_name): move this to
        * wptVerifyList.cpp (get_file_name): ..this place and declare
        it as static because no other file need this function.

2003-04-15  Timo Schulz  <[email protected]>

        * wptClipImportDlg.cpp (data_cb_dlg_proc): New.
        (data_cb_thread): New.
        (data_cb_dlg_create): New.
        (data_cb_dlg_destroy): New.
        (data_cb_new): New.
        (clip_import_dlg_proc): Use a callback dialog to
        show the user the data decoding procedure is in
        progress. This dialog is destroyed in the key
        import statistics dialog.


2003-04-13  Timo Schulz  <[email protected]>

        * wptSubkeyDlgProc.cpp (key_subkey_dlg_proc): Use a callback
        context.
        * wptUidDlgProc.cpp (keyuid_dlg_proc): Likewise.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Set the protect
        flag inside the KEY contect if needed.
        * wptKeySubkeyDlg.cpp (key_subkey_dlg_proc): Only ask for a
        passphrase if the protect flag is set.
        Display the callback dialog to show the progress.
        Implemented the "revkey" feature.
        * wptKeyUidDlg.cpp (key_uid_dlg_proc): Likewise.
        (do_add_new_userid): New. Add an entry to the list box
        after the GPG process finished.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Initialize sig
        to zero to avoid segfaults.

2003-04-12  Timo Schulz  <[email protected]>

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Use the new
        GPGME code.
        * wptVerifyList.cpp (verlist_add_sig_log): Likewise.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg_proc): Likewise.
        * wptFileManager.cpp (fm_decrypt): Likewise.
        * WinPT.cpp (check_default_key): Check if the keys in gpg.conf
        are valid and in the keyring.
        * wptKeySignDlg.cpp (do_check_protection): Disable the passphrase
        item if the key is not protected.


2003-04-09  Timo Schulz  <[email protected]>

        * wptFirstRunDlg.cpp (first_run_dlg_proc): Mark selection as
        invalid for cancel.

2003-03-20  Timo Schulz  <[email protected]>

        * wptFindWnd.cpp: Removed.
        * wptW32API.c (dialog_box_param): Use FindWindowEx() instead of
        find_window.
        * Whenever it's possible, use case insentensive searches to avoid
        problems.

2003-03-19  Timo Schulz  <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Put the init_dtp code here.
        * wptPassphraseCB.cpp (hide_typing): Removed. Use short code directly
        in the code.
        * wptPasswdDlg.cpp: Likewise.
        (passphrase_cb_init): Declare as static.
        (passphrase_cb_gpgme): Modified to use the static function and rename 
        it to...
        (passphrase_gpgme_set_cb): ..this. New.
        * wptSecListDlg.cpp: Complete new appraoch. Now we use CB_SETITEMDATA
        and friends to assign data to each item.
        Move dialog code to...
        * wptClipSignEncDlg.cpp: ..here.
        * MyGPGME/keycache.c: We first look for directly key signatures and
        then we skip all other signatures if we've already seen the key. This
        is needed to gather the designated revoker keys.

2003-03-18  Timo Schulz  <[email protected]>

        * wptKeyImportStatDlg.cpp (import_status_dlg_proc): Fix index
        of revocation from 9 to 8. 
        Set the text that no key was updated only if no new sig, subkey,
        userid and no public were added.
        Add more information: new {subkeys, signatures, userid}.
        * wptKeyManager.cpp (km_delete_keys): Fixme lame, '=' instead of '==' bug.
        * wptDlgs.cpp: Removed.
        * wptDlgs.h: (dlg_fatal_error): New. Macro.

2002-03-16  Timo Schulz  <[email protected]>

        * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): Encode the
        optional text in UTF-8 to avoid charset problems.
        * wptKeyManager.cpp (km_quote_uid): Use dynamic memory instead
        of a static buffer. Changed all callers.
        * wptKeylist.cpp (keylist_cmp_cb): Implemented sort functions
        for the rest of the columns.
        (keylist_handle_column_click): New.
        * wptKeyEditOwnertrustdlg.cpp (keyedit_ownertrust_dlg_proc):
        Removed the 'Advanced' button because it only confuses users
        and it is not often used.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Support to ex-
        and import the trustdb values (ownertrust).
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Ability to
        sort columns.

2002-03-09  Timo Schulz  <[email protected]>

        * 64-bit support for wipe operations.

2002-03-08  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_parse_command_line): Ignore lines with '--'
        because they are options rather than files.
        * WinPT.cpp (WinMain): Allow to start the key manager directly
        via --keymanager.
        * wptFileManagerDlg.cpp (file_secdel_confirm_dlg_proc): New.
        (wipe_cb): New. Wipe callback function.
        (fill_drive_combobox): New. Fill in all logical drives into
        the given combo box.
        (wipe_thread): New. Worker thread.
        (update_disc_stats): New. Set the disc statistics for the
        given drive entry.
        (space_wipefrees_dlg_proc): New.

2002-03-01  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_check_file_type): Fix bug in the detection 
        logic. Now we can decrypt symmetrically encrypted files again.
        Be stricter on memory alloaction checks.
        (fm_get_file_type): Be more strict with the return code of
        parse_packet. This avoids bogus file types for MS-Word files and 
        other non-PGP data.
        (fm_wipe): Use the wipe mode from the registry and not a fixed value.
        * WptRegistry.cpp (set_reg_winpt_prefs): Support wipe mode.
        (get_reg_winpt_prefs): Likewise.
        * wptFilePrefsDlg.cpp: Removed. We don't use it any longer.
        * wptDlgs.h: Corrected all dialog protypes to BOOL. 
        LRESULT was not correct.

2002-02-08  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Only export
        the secret key when a file was chosen.

2002-02-01  Timo Schulz  <[email protected]>

        * wptKeyserver.cpp (kserver_search): Fix <KEYID bug.

2002-01-25  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Support to copy the key id
        and the fingerprint to the clipboard. Closes #674455.
        Automatically reload the keycache when a command is chosen and the cache
        state is set to 'reload requested'. Closes #671218.
        * wptKeySignDlg.cpp (do_fill_seckeylist): Make sure the public key parts
        are not invalid.
        * WinPT.cpp (check_permissions): Make sure we have the permission to
        write the keyring. Stop if not because it's expected at many other places.
        * wptSigList.cpp (siglist_add_key): Indent signatures under the root entry.
        (siglist_build): Use a placeholder sig to avoid the position chaos.
        * wptKeyUidDlg.cpp: Unified text for 'user-ID'.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): If a key is not found, 
        display more information and use a GPG like output.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Force trust if there is
        an invalid key in the list of recipients. Closes #674965.


2002-01-21  Timo Schulz  <[email protected]>

        * wptSymEnc.cpp (gpgme_encrypt_symmetric): Ask the passphrase twice to
        avoid typing mistakes.

2003-01-19  Timo Schulz  <[email protected]>

        * winpt.cpp (WinMain): Fixed spelling mistake. Closes #669321.
        * wptKeyManagerDlg.cpp (do_resize_window): New.
        (do_create_minpopup): New. Closes #669730.
        * wptVerifyList.cpp (get_sig_date): Renamed to...
        (longdate_to_strdate): New. Changed all callers.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): If the ciphertext contains
        a signature, also display the time of it. Closes #669780.
        * wptKeyImportStatusDlg.cpp (import_status_dlg_proc): Localize 2 strings.
        * wptEditKeyOwnertrust.cpp (keyedit_ownertrust_dlg_proc): Fixed a typo.
        * wptKeySignDlg.cpp (do_add_local_user): New. Now the dialog has the ability
        to choose the signer.
        (keysign_dlg_proc): Implemented a feature request. See above.

2003-01-08  Timo Schulz   <[email protected]>

        * wptKeyEditAddUidDlg.cpp (keyedit_adduid_dlg_proc): Output a warning
        if the user tries to add the email address in the name field.
        * wptKeyserver.cpp: Add support for protocols.
        (finger_readline): New.
        (finger_recvkey): New.
        * wptKeyUidDlg.cpp (keyuid_dlg_proc): Add a warning icon to the revoke
        message box to show it's a serious decision.
        * wptPasswdDlg.cpp (passwd_dlg_proc): Center dialog window.
        * wptRegistry.cpp (regist_single_filetype): Now internal and we use
        an easier way to get the location of the binary.
        (regist_inst_winpt): Implemented the 'with_ext' part and add a registry
        entry to avoid double file registering.

2003-01-07  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (do_center_window): New. Try to set the window
        pos from the coordinates from the registry.
        (keymanager_dlg_proc): Store the window pos in the registry.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg): Check box for PGP compatible certs.
        * wptKeyImportStatusDlg.cpp (import_status_dlg_proc): Print out a hint when
        a revcert was found.
        * wptKeyserverDlg.cpp (hkp_recv_key): Print an error if the LDAP import does
        not succeed.
        (keyserver_dlg_proc): Corrected some listview index values.
        * wptKeylist.cpp (keylist_add_key): Use primary user-id when possible.

2002-12-23  Timo Schulz  <[email protected]>

        * wptRegistry.cpp (regist_inst_winpt): Try to create \Keyserver
        directory if does not exist.
        * wptKeyserver.cpp: Simpliefied config file.
        (kserver_change_proxy): Write config to the registry. Remove
        code for the config file.
        * wptProxySettingsDlg.cpp (read_proxy): More robust code.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Removed the feature
        to send keys. The Key Manager is better for this.


2002-12-21  Timo Schulz  <[email protected]>

        * Fixed some language mistakes.
        * wptMainproc.cpp: Use the desktop window as the parent window
        for the main dialogs so they are visible in the taskbar.
        * wptKeyManagerDlg.cpp: Enable minimize.
        * wptFileManager.cpp (fm_parse_command_line): Support for detached
        signatures.
        (fm_encrypt_directory): New.
        * wptKeylist.cpp (keylist_add_key): Check the current key if it
        is not expired, not the primary (idx=0).

2002-12-18  Timo Schulz  <[email protected]>

        * wptGPG.cpp (get_gnupg_optfile): Support for gpg.conf instead
        of the old name "options".
        * WinPT.cpp (WinMain): Try to repair broken home directories
        in the registry. Thanks to Gustavo who reminded me of it.
        * wptKeyserver.cpp (check_hkp_response): Only copy the text
        between <p> and </p> when possible.
        * wptAgent.cpp: Re-activated the old code. Now the passphrase
        timer can be used.

2002-12-14  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_check_for_seckey): Ultimate doesn't mean
        any longer there is also a secret key.
        (km_check_photo): New.
        (km_complete_status_bar): New.
        * wptFileManager.cpp (fm_verify): Support for bad signatures.
        Set the sigmode if not set.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Output a warning when
        the ownertrust of a non-valid (not signed) key is changed.
        * wptRegistry.cpp (expand_path): New. Use this code because it's
        much shorter.

2002-10-14  Timo Schulz  <[email protected]>

        * wptKeyserver.c: Replaced all strdup's with m_strdup and free 
        with free_if_alloc.
        (ldap_recvkey): Fill with life. We use the GPG plugin to avoid
        all the LDAP overhead.

2002-10-13  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_file_import): Alloc buffer, it's not static
        any longer.

2002-10-31  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_update_default_key_str): Fixed '0x' handling.
        Thanks to Gustavo.
        * wptKeylist.cpp (add_key): Now we only use find_secret_key to detect
        whether it's a key pair or not.
        * Callback struct into KEY so we can modify the values in the background.
        * wptKeyPropsDlg.cpp (change_ownertrust): New.

2002-10-30  Timo Schulz  <[email protected]>

        * wptLDAP.cpp, wptLDAP.h: Removed. The plan is to use the gpgkey_xxx.exe
        LDAP plugin for this purpose.
        * wptMainproc.cpp (winpt_main_proc): Removed all LDAP stubs.
        * wldap32.lib is now not longer needed.
        * wptKeyManagerDlg.cpp (keymanager_dlg_proc): Copy userid to clipboard.
        * Updated the resource file.
        * wptFileManager.cpp (fm_parse_command_line): Implemented the stuff
        for 'Decrypt', 'Verify', 'Import'.

2002-10-15  Timo Schulz  <[email protected]>

        * Changed all s(n)printf -> msg_box constructs to log_box.

2002-10-13  Timo Schulz  <[email protected]>

        * wptKeylist.cpp (get_key_expire_date): New.
        * wptKeyPropsDlg.cpp (key_props_dlg_proc): Use it here.

        * Removed global keycache from GPGME. It's a bad style to mix
        general and specific interfaces.

        * wptGPGME.cpp (get_pubkey): New. Used to hide keycache implementation
        details. Useful to replace it later.
        (get_seckey): Ditto.
        (keycache_reload): Moved from the GPGME library.
        (keycache_release): New.
        (keycache_init): New.
        (keycache_set_reload): New.
        (keycache_get_reload): New.
        (keycache_get_ctx): New.

        * wptSigList.cpp (siglist_add_key): Use the new code.
        (siglist_build): Ditto.


2002-10-10  Timo Schulz  <[email protected]>

        * wptW32API.cpp (get_filename_dlg): Added default filename parameter.
        Changed all callers.
        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Adjusted the code for the
        new get_filename_dlg.
        * wptFileManager.cpp (fm_export): Likewise.
        * wptClipDecryptDlg (clip_decrypt_dlg): Modified the verify message box.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Changed the code for edit-key.
        Use signature class dialog.
        * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): Use the new code and the
        keyid instead of the userid to avoid charset problems.
        (err_message): New.

        * Moved all wipe specific code (random, rmd160) to the DLL so we can
        save some memory for the tray section.

        * wptKeyRevokersDlg.cpp (revokelist_build): New.
        (revokelist_init): New.
        (key_revokers_dlg_proc): New.

        * wptKeyPropsDlg.cpp (key_props_dlg_proc): Use the designated revoker
        code here when available.

2002-09-25  Timo Schulz  <[email protected]>

        * wptClipboard.cpp (clip_parse_pgp_id): Add a flag when the text
        is dash escaped. This is useful for keys to avoid errors.
        * wptKeyManager.cpp (extract_dash_escaped_key): New. Extract an
        OpenPGP key from the clipboard which is dash escaped.
        (km_clip_import): Use the new code here.

2002-09-23  Timo Schulz  <[email protected]>

        * wptParser.cpp (add_multi_option): Support for values with more ' 's
        and skip the ' ' after the name.
        (modify_entry): New.
        * wptGPG.cpp (gnupg_save_options): Removed.
        (gnupg_load_options): Removed.
        (gnupg_release_options): Removed.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Use the new code.

2002-09-17  Timo Schulz  <[email protected]>

        * winpt.cpp (WinMain): Use make_filename and no static buffer.
        Modified for the new gnupg interface.
        * wptFile.cpp (make_filename): New.
        * wptGpgCmds.h: New from GPG 1.1.92
        * wptGPG.cpp (gnupg_import_keyrings): Use dynamic buffers 
        and make_filename.
        * wptKeygenDlg.cpp (ask_for_backup): Use new gpg code and
        make_filename instead of static buffers.
        * wptKeyCacheDlg.cpp (keycache_dlg_proc): Likewise.
        * wptParser.cpp: Changed to new allocation instead of malloc.
        * wptGPGOptSkel.h: Updated from GPG 1.1.92
        * wptRegistry.cpp (get_reg_entry): Expand %s like registry strings.

2002-09-13  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_show_photo): Use a const buffer for the
        image and do NOT free it.
        * wptKeyUidDlg.cpp (keyuid_dlg_proc): Implement "revoke" function.
        (find_user_id): Use keyid to find the key. Changed all callers.

        * Removed global gpg_version variable. Now we also support GPG 1.1.9x
        so we don't need to check this after the start again.

2002-09-12  Timo Schulz  <[email protected]>

        * wptPasswdDlg.cpp (passwd_dlg_proc): Implement the "Hide Typing" fature.
        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Off by one bug for secret
        key export.
        * wptKeyManager.cpp (fm_encrypt): Use the new GPG status messages to
        check if the encryption failed.
        (km_show_photo): Fixed offset calculation.
        Use keyid as filename and delete the tempfile after use.
        * wptFile.cpp (init_file_lock): Use dynamic buffer.
        (release_file_lock): Free this buffer.
        * wptFileManager.cpp (quote_filename): Removed.
        (quote_file): New. Use dynamic buffers.
        (fm_import, fm_decrypt, fm_encrypt, fm_sym_encrypt, fm_export): 
        Use it here.
        * wptFileStatDlg.cpp (do_list_packets): Do not cache FD. 
        Initalize packet at the begin and during the loop.
        * wptFileManager.cpp: Replaced all static memory handling with
        dynamic routines.
        * wptKeyCacheDlg.cpp (key_cache_dlg): Remove obsolete ownertrust
        functions.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Ditto.        

2002-09-10  Timo Schulz  <[email protected]>

        * wptFileManager.cpp (fm_get_file_type): Disable FD cache.
        (fm_decrypt): Only cut off the extension if it belong to GPG.
        Added user ID to the box if the file was signed.
        Ask for the filename if the name has no valid GPG extension.

2002-09-09  Timo Schulz  <[email protected]>

        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Improved code for
        the privat key (export).

2002-09-08  Timo Schulz  <[email protected]>

        * wptKeygenDlg.cpp (ask_for_backup): Check if the copy process
        really succeeded.
        (mbox): Alias for msg_box with fixed title to avoid long lines.
        * wptKeyEditAddSubkeyDlg.cpp (keyedit_addsubkey_dlg_proc): Allow
        to generate keys with a length til 4096 bits.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Check for
        invalid recipients and print out the reasons.
        * wptKeylist.cpp (keylist_add_to_recipients): Improved error message
        and corrected the validity checking.

2002-09-07  Timo Schulz  <[email protected]>

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): 
        Print notation data when available.
        Show if the signature is expired or not.

        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Added the show photo
        command to the context menu.

        * wptKeygenDlg.cpp (keygen_dlg_proc): New default keysize is 1792.
        This is 256 bits more than the old size. Hopefully it's enough 
        security to protect against the most enemies ;-).

2002-09-04  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_check_key_status): Parse new fields.

2002-09-03  Timo Schulz  <[email protected]>

        Removed all OpenCDK code from PTD. The code is not tested very
        well and it might contain some errors. Now we used a stripped down
        version of GnuPG code. This has two advantages. First the code is
        stable and second we can easier port other parts to native GPG code.

        * wptFileManager.cpp (fm_get_file_type): Use native GPG code.
        * wptKeyCacheDlg.cpp (keycache_dlg_proc): Add photos from the
        keyring when present to the keycache.
        * wptKeyManager.cpp (km_show_photo): Fixes to work again with the 
        modified code.
        (km_check_for_seckey): Check substrings of the value because we
        don't use '**' values any longer.
        * wptFileStat.cpp (do_list_packets): New. Adapted from the old code.
        (file_stat_dlg_proc): Uses the new code.

2002-09-02  Timo Schulz  <[email protected]>

        * wptKeyManager.cpp (km_privkey_export): Check return codes and
        some types has been changed.
        (km_file_export): Likewise.

2002-09-01  Timo Schulz  <[email protected]>

        * wptFirstRunDlg.cpp (get_setup_choice): New. Returns the choice
        of the dialog.
        * WinPT.cpp (WinMain): Use it here. Reworded the error message.
        * wptGPG.cpp (gpg_import_keyrings): New.
        Let the user chose the keyrings and then they are copied to the
        homedir. After the procedure, the key cache will be reloaded.
        * wptKeyManager.cpp (km_delete_keys): New delete confirmation messages.
        * wptSigClassDlg.cpp (sig_class_dlg_proc): New.
        (get_sig_class_choice): New.
        * wptKeySignDlg.cpp (get_printable_fpr): New. More human readable 
        fingerprint.
        (keysign_dlg_proc): Added new value for the GPG callback to handle
        the signature class.
        * wptKeyUIDDlg.cpp (find_user_id): New. Find the index of the 
        userID by calling edit-key with colons.
        (keyuid_dlg_proc): Use it here.

2002-08-31  Timo Schulz  <[email protected]>

        * wptGPG.cpp (gpg_check_homedir): Some fixes for the return codes.
        (check_homedir): Ask the user whether to create the directory.
        * wptKeysigDlg.cpp (keysig_dlg_proc): Fixed keyid. Now it works
        to retrieve missing keys from a HKP server.
        (recv_missing_keys): Likewise.
        * wptPassphraseCB.cpp (passphrase_callback_proc): 
        Implemented     the "Hide Typing" feature.
        (hide_typing): New.
        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Improved error messages.
        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Improved MDC handling.
        Due to some attacks a MDC error is treated as a fatal error and a
        possible security risk.
        * wptClipImportDlg.cpp (print_import_status): Use a dialog instead
        of a silly message box. Furthermore the user gets more information
        about the import procedure.
        * wptKeyImportStatusDlg.cpp (import_status_dlg_proc): New.
        * wptFileManager.cpp (fm_import): Report invalid user ID's.
        (fm_verify): Try to guess the data name for detached signatures
        before we bother the user. When it's found, use it.
        * wptKeyManager.cpp (km_file_import): Ditto.

2002-08-28  Timo Schulz  <[email protected]>

        * wptClipboard.cpp (clip_parse_pgp_id): Support for PGP 2.6.x types.
        * wptFileMananger.cpp (fm_check_armor_type): Ditto.


2002-08-26  Timo Schulz  <[email protected]>

        * wptTypes.h (free_if_alloc, CHECK_BOUND): New.
        * wptClipEditDlg.cpp (gpgopt_dlg_proc): Use free_if_alloc to make sure
        the memory is really released. Some strict checks for return values.
        Ident file.

        * wptAboutDlg.cpp: Ditto. (ident)
        * wptGPGAboutDlg.cpp: Ditto.
        * wptClipDecryptDlg.cpp: Ditto.
        (clip_decrypt_dlg): Stricter return value checkings. 
        Avoid one indent level.

        * wptImportList.cpp (implist_add_key): More strict return value
        checking.
        * wptKeylist.cpp (keylist_cmp_cb): Fixed a typo.
        (add_key): New key status system.
        (keylist_get_keyflags): New.
        (keylist_enum_recipients): Simplified and use the new key flags.

        * wptSiglist.cpp (siglist_add_key): Fix possible overflows.
        (verlist_add_sig_log): More stricter checks.

        * wptRegistry.cpp (get_reg_winpt_prefs): Fixed possible bug.

2002-06-16      Timo Schulz <[email protected]>

        Don't put the questions in the message box title bar.

        * wptGPGPrefsDlg.cpp (gpg_prefs_dlg_proc): Only close FP if it
        is really opened. Thanks to Nelson.

        * wptKeyProps.cpp (keyprops_dlg_proc): Use a more informative title
        for chaning the passphrase. Suggested by Ed.

2002-06-07      Timo Schulz <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Support for sign & encrypt hotkeys.
        * wptKeyManagerDlg.cpp: Refresh keys was added in the menu.
        * wptListView.cpp (listview_select_all): New.
        * wptClipSignDlg.cpp (clip_sign_dlg_proc): Fixed the return code.

2002-05-31      Timo Schulz <[email protected]>

        * wptTrayPop.cpp: Revamped some parts of the code.

        Changed all status_box functions to show_msg. The advantage
        is that we only wait a fixed time and the user doesn't need
        to hit the OK key. We should add  the time delay in the preferences.

        * wptKeyManager.cpp (km_show_photo): New.

2002-05-30  Timo Schulz <[email protected]>

        * wptFileManager.cpp (fm_verify): Corrected the handling
        for detached RSA signatures.
        (fm_add_sig_stat): Added support for short fingerprints.

2002-05-08      Timo Schulz <[email protected]>

        * wptKeyserver.cpp (kserver_change_proxy): Check the values.
        Thanks to njek for reporting it.

2002-05-07      Timo Schulz <[email protected]>

        * wptGPG.cpp (check_gpg_engine): New.

        * wptKeyCacheDlg.cpp (keycache_dlg_proc): Add GPG 1.0.6 compatible 
        routines.

        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Ditto.

        * wptKeyEditOwnertrustDlg.cpp (keyedit_owerntrust_dlg_proc): Ditto.

2002-05-06      Timo Schulz <[email protected]>

        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Change the wording of
        the buttons.

2002-05-05      Timo Schulz <[email protected]>

        * Fixed problem with rev certs for imports stats.

        * Cosmetical changes for the GPGME libraray.

2002-05-01      Timo Schulz <[email protected]>

        * wptKeygenDlg.cpp (fill_keytype_box): New.
        (keygen_dlg_proc): Use a combo box for various key types. With GPG 1.0.7
        there is full RSA support.

        Now we use the new status code by GPG (INV_RECP, NO_RECP) to figure out
        what the problem was when no encryption was done.

        * wptKeysignDlg.cpp (keysign_dlg_proc): Before we sign a key, we make 
        sure it was not already signed (ALREADY_SIGNED).

        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Due to the new trust system,
        now we also support to sign ultimate trusted keys.

        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Try to check if the button
        is checked and do not check it.

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg_proc): New format for the verify
        box and now we also support the date of the signature.

        Applied Rich's spelling and grammer mistakes.
        Fixed a lot of minor spelling mistakes and capital letters for dialogs.

2002-04-30      Timo Schulz <[email protected]>

        Merge ownertrust handling into the keycache. Now GPG outputs the
        ownertrust in the key listing which means we can get the ownertrust
        value from the keycache.

        (keymisc_dlg_proc): Add a button to rebuild the sig database cache.
        Please not that this is not the same as the key cache! The key cache
        will be updated when a new key was imported or a subkey was added/changed.
        The signature cache only affects the validity of the keys.

        Removed the MyGPGME trustlist code. Now we can use the field in the key
        listing to determine the ownertrust (which makes things a lot of easier).

2002-04-29      Timo Schulz <[email protected]>

        Adjustments for GPG 1.0.7

        * wptKeyEditDlg.cpp (keyedit_ownertrust_dlg_proc): Support ultimate trust
        and ask the user if he knows what he's doing.
        * wptKeyManager.cpp 
        (keylist_subclass_proc): Use double click to open the props.
        * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Allow the user even to modify a
        ultimate ownertrust value.
        * wptKeyEditAddSubkeyDlg.cpp (keyedit_addsubkey_dlg_proc): Support for
        new RSA keys.

2002-04-28      Timo Schulz <[email protected]>

        * wptRegistry.cpp (get_reg_winpt_prefs): New option for keylist mode.
        (set_reg_winpt_prefs): Ditto.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Support for keylist mode option.
        (set_keylist_mode): New.

        Implement minimal keylist mode. Suggested by Fabian.

        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Implement it here.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.
        * wptKeylist.cpp (keylist_add_key): Ditto.
        (keylist_load): Ditto.
        (keylist_build): Ditto.

2002-04-27      Timo Schulz <[email protected]>

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Support for the  new dialog.
        * wptFileSaveDlg.cpp (file_save_dlg_proc): New.
        * wptClipboard.cpp (clip_parse_pgp_id): use logical OR to concat the values.
        * wptMainProc.cpp (clip_gpg_dlg): Use the new PGP id's.
        (currwnd_gpg_dlg): Ditto.
        
        Now it's possible to parse cleartext signatures which contains an
        encrypted message inside the body.

        * wptTextInputDlg.cpp (load_file_contents): New.
        (text_input_dlg_proc): Support for choosing the data file.

        * wptFileManager.cpp (fm_verify): Support for detached signatures.
        (fm_parse_files): Ditto.


2002-04-26      Timo Schulz <[email protected]>

        * wptKeyUidDlg.cpp: Fixed a typo. Kudos to Dugan Chen.
        * wptKeyUidDlg.cpp: Ditto.

2002-04-25      Timo Schulz <[email protected]>

        * wptImplist.cpp (implist_add_key): Catch possible segfault.
        * wptVerifyList.cpp (verlist_add_sig): Ditto.
        * wptKeyManager.cpp (km_check_for_seckey): Modified for GPG 1.0.7.
        * wptKeylist.cpp (find_secret_key): New.
        (add_key): Use it here.
        (keylist_add_key): And here.

        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Fixed a bug that prevent
        to fetch the key.

2002-04-24      Timo Schulz <[email protected]>

        * wptKeyManagerDlg.cpp (key_misc_dlg_proc): Support to maximize windows.
        
        Changed the way to modify the "Version:" string.

        * wptKeyserver.cpp (add_node): New.
        (kserver_change_proxy): New.
        (kserver_read_config): New.
        (kserver_write_config): New.    
        (kserver_cfgfile_release): New.
        (proxy_release): New.

        * wptProxySettingsDlg.cpp (read_proxy): New.
        * wptFileStatDlg.cpp (file_stat_dlg_proc): New.
        * wptFileManager.cpp (fm_list): New.
        (fm_parse_files): Support the new list command.

2002-04-23      Timo Schulz <[email protected]>

        * wptRFC2440.cpp: Removed. We now use the OpenCDK package.
        * wptFileManager.cpp (fm_get_file_type): Removed the old RFC2440 code.
        (fm_encrypt): Modified code to allow sign & encrypt.
        (fm_parse_file): Ditto.
        (fm_decrypt): Support for checking signatures.
        * wptFileManagerDlg.cpp (file_manager_dlg_proc): Ditto.

2002-04-19      Timo Schulz <[email protected]>

        * wptImplist.cpp (implist_load): Support for the advanced PGP parser code.

2002-04-05      Timo Schulz <[email protected]>

        * wptSigList.cpp (siglist_add_key): Added UTF8 support. Thanks to Scire.
        * wptKeyUidDlg.cpp (keyuid_dlg_proc): Ditto.
        * wptKeySignDlg.cpp (keysign_dlg_proc): Ditto.
        * wptKeyAddUidDlg.cpp (keyedit_adduid_dlg_proc): Ditto.

2002-03-31      Timo Schulz <[email protected]>

        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ask if the user wants to
        select the key used for signing.
        * wptSeclistDlg.cpp (seclist_dlg_proc): New. Dialog for secret selecting.
        * wptFilePrefsDlg.cpp (file_prefs_dlg): Fixes for the combo box ;-).
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Reload the keycache after
        fetching keys via HKP and try to update the Gpgmekey inside.
        * wptVerifyList.cpp (verlist_add_sig): Check if the key context was
        set inside the signature. Fixes some segfaults related to the HKP key
        fetching during verification. Thanks to Julian. And force to use UTF8
        for user ID's.
        * wptClipSignDlg.cpp (one_key_proc): If only one secret exists,
        prevent that the dialog is loaded and ask for the passphrase directly.


2002-03-29      Timo Schulz <[email protected]>

        * wptGPG.cpp (create_groupdb): Only close the file handling if it
        really exists. Thanks to Mark.
        (gpg_check_homedir): Applied the patch. Now we're a little stricter
        about the homedir checks.
        (check_homedir): Fixed a possible memory leak.
        * WinPT.cpp (WinMain): Check the homedir functions to exit the program
        if      we've found some problems.
        * wptErrors.cpp (winpt_strerror): New value if a directory could not 
        created.
        * wptMainProc (winpt_main_proc): Use new code for the current window mode.
        * wptCurrWnd.cpp (get_curr_wnd): Ditto.
        (get_window_contents): Always set focus to the current window.

2002-03-22      Timo Schulz <[email protected]>

        * wptMainProc.cpp (currwnd_gpg_dlg): If the viewer is used, doesn't
        set window contents for some commands.
        (winpt_main_proc): Use the code here.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Allow to generate keys > 2048 bits.
        * wptProxySettingsDlg.cpp: (keyserver_proxy_dlg_proc): New.
        * wptKeyserverDlg.cpp (keyserver_dlg_proc): Use the proxy dialog here.
        * wptKeyserver.cpp (kserver_load_conf): Fixed malformed strings.

2002-03-02      Timo Schulz <[email protected]>

        * Use capital letters in the main menus and applied Patricks spelling
        corrections.

        * wptClipDecryptDlg.cpp (clip_decrypt_dlg): keyID is a string
        not an integer. Thanks to scrumpy.      
        * wptWipeFile.cpp (rename_unlink): Use '\' instead of '/'.
        (overwrite): Some bugfixes to set the pointer to the begin of the file.
        * wptVerlist.cpp (verlist_build): New keyID column.
        (verlist_add_sig): Use it here.

2002-03-01      Timo Schulz <[email protected]>

        * wptWipeFile: Replaced all low level I/O functions with W32 API
        functions. And support for more wiping modes. I don't know to
        support all, but those makes sense for me:
        1. Simple (2 random passes)
        2. DoD (as described in the standard)
        3. Peter Gutmanns method (from the paper)


2002-02-28      Timo Schulz <[email protected]>

        * wptImplist.cpp (implist_add_key): UTF8 support.
        Handle invalid userID's.
        * wptPassphraseCB.cpp (parse_gpg_description): UTF8 support.
        (passphrase_callback_proc): Ditto.


2002-02-23      Timo Schulz     <[email protected]>

        * wptListview.cpp (listview_del_items): New.
        * wptKeyManager.cpp (km_delete_keys): Use it here.
        * wptKeygenDlg.cpp (keygen_dlg_proc): UTF8 support.
        * wptKeylist.cpp (add_key): UTF8 support.

2002-02-08      Timo Schulz <[email protected]>

        * wptNLS.c: Now it's C-source because GPGME needs gettext too.
        (stpcpy): Makes it static.
        * errors.c: localize all error strings.
        * WinPT.cpp (get_gettext_lang): Move the code in this file because
        we can't use it in plain C.

2002-02-05      Timo Schulz <[email protected]>

        * wptGPG.cpp (gpg_save_options): Catch the case when the options file
        exist but it has a length of zero.
        (gpg_display_error): Print out the data from the GPG stderr 
        (when available).
        * w32-util.c (_gpgme_get_gpg_optfile): Check if the file exists and if
        not, return NULL.
        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Add support to export secret
        keys.

        * Fixed a lot of memory allocation all over the place.

2002-02-05      Timo Schulz <[email protected]>
        
        wptGPG.cpp (gpg_save_options): Fixed the code for the case the
        values don't exist in the options file. Thanks to Lutz who found this out.
        (get_gpg_default): First search for "default-key" then for "encrypt-to".

2002-02-04      Timo Schulz <[email protected]>

        * WinPT.rc: Set LVS_SHOWSELALWAYS for all listview elements
        which need it. Thanks to Timo who find this out.
        * WinPT.cpp (WinMain): We don't quit in the case the user changed
        the preferences.
        (update_keycache): New. Handy function to update the keycache.

        * Use quotation for the options file in any case.

        * clipboard.c (gpgme_clipboard_verify): When the NO_PUBKEY status
        is set, we don' try to get the sig key.

        * wptGPG.cpp (get_gpg_default_key): Revamped.

2002-01-26      Timo Schulz <[email protected]>

        * wptKeylist.cpp (keylist_add_key): Use flags for the file manager
        to avoid to show all userid's. Thanks to Frank.
        * wptDateDlg.cpp (date_dlg_proc): New context to use different
        window texts and some other features.
        * wptKeygenDlg.cpp (keygen_dlg_proc): Use it here.
        * wptKeySubkeyDlg.cpp (subkey_dlg_proc): Ditto.
        * wptGPG.cpp (gpg_create_groupdb): Create the groupdb.gpg file if
        it doesn't exist.
        * WinPT.cpp (WinMain): Use the new code here.

2002-01-23      Timo Schulz <[email protected]>

        * wptClipEditDlg.cpp (clip_edit_dlg_proc): Release the buffer for
        loading a file.
        Add new code to save file with clipboard contents.

2002-01-20      Timo Schulz <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): Fix the error, that the user
        have to click twice before the menu appears. Richard told me this.


2002-01-18      Timo Schulz <[email protected]>

        * wptMainProc.cpp (winpt_main_proc): NLS support for new menu style.
        * wptPassphraseCB.cpp (parse_gpg_description): Support when no
        description was given. One example is when symmetric was used.

2002-01-13      Timo Schulz <[email protected]>

        * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Fixed some boolesche
        settings.
        * wptGPG.cpp (gpg_backup_options): New.
        (gpg_load_options): Ignore comment lines.
        (gpg_save_options): Rewritten.

2002-01-06  Timo Schulz <[email protected]>

    * wptPreferencesDlg.cpp (prefs_dlg_proc): Support for the sign+encrypt
    hotkey.
        * wptRegistry.cpp: Ditto.
        * wptRegistry.h: Ditto.
        * wptHotkey.h: Ditto.
        * wptGPG.cpp (gpg_load_options): New.
        (gpg_save_options): New.

2002-01-01      Timo Schulz <[email protected]>

        * wptFileManager.cpp (fm_verify): Support for the case there is
        no public key to verify the signature.

2001-12-30      Timo Schulz <[email protected]>

        * wptFileManager.cpp (fm_sign): Always use callbacks for the
        passphrase.
        (fm_decrypt): Ditto.
        (fm_parse_files): Cache the passphrase for the session and check
        if the file still exists.
        * wptRFC2240.cpp (parse_ske_sesskey): Removed. We no longer use
        low level stuff here.
        * wptFile.cpp (get_keyid_from_file): Ditto.

2001-12-21      Timo Schulz <[email protected]>

        * wptTextInputDlg.cpp (text_input_dlg_proc): New.
        * wptMainProc (clip_gpg_dlg): Support for deached signatures.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Ditto.

2001-12-19      Timo Schulz <[email protected]>

        * Completed work on the temporary file support for GPG.
        * wptRegistry.cpp (set_reg_winpt_prefs): Add mode for the
        plaintext viewer option. Suggested by Markus Winkler.
        (get_reg_winpt_prefs): Ditto.
        * wptPreferencesDlg.cpp (prefs_dlg_proc): Ditto.
        * wptMainProc.cpp (winpt_main_proc): Ditto.

2001-12-15  Timo Schulz <[email protected]>

    * wptKeyManagerDlg.cpp (keymisc_dlg_proc): New menu items for
    copy and paste.

2001-12-02      Timo Schulz <[email protected]>

        * wptGroups.c: Revamped from the base. Arggg.

2001-11-29      Timo Schulz <[email protected]>

        * wptKeyManager.cpp (km_groupdb_expand_recipients): New.
        * wptMainProc.cpp (clip_gpg_dlg): New.
        Modify the whole event loop so we don't need all the same code
        for each command. And we use the new foreground code.
        * wptW32API.cpp (check_date): Fixed.

2001-11-27      Timo Schulz <[email protected]>

        * wptKeyserver.cpp (base64_encode): New. Marco provided HTTP
        proxy authentifcation support for each command.
        (kserver_update_proxyuser): New. Ditto.
        (kserver_send_request): Ditto.
        (kserver_recv_request): Ditto.
        (kserver_search_init): Ditto.

2001-11-24      Timo Schulz <[email protected]>

        * wptKeyManager.cpp (km_groups_new): New.
        (km_groups_release): New.
        (km_groups_load): Rewritten.
        (km_groups_add): New.
        (km_groups_del): New.
        (km_groupdb_open): New.
        * wptKeyManagerDlg.cpp (keymisc_dlg_proc): Added group support.
        * wptGroups.c (groupdb_enum_read): Store the record before increment it.

2001-11-23      Timo Schulz <[email protected]>

        * wptW32API.cpp (set_active_window): New.
        (reset_active_window): New.
        (window_reminder): New. This is a delayed thread procedure to
        force the focus (foreground) to the dialogs for the current
        window mode.
        * wptMainProc.cpp (winpt_main_proc): Use it here.
        * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Ditto.
        * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.
        * wptClipSignDlg.cpp (clip_sign_dlg_proc): Ditto.
        * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Ditto.

2001-11-22      Timo Schulz <[email protected]>

        * wptW32API.cpp (set_foreground_wnd): New.

        Fixed the return value of all EndDialogs.

        * wptMainProc.cpp: Remove all code parts which did the same for the
        current window support. Now the code uses a dialog switch which is
        much smaller.

2001-11-18  Timo Schulz <[email protected]>

    * wptKeyManager.cpp: New. Contains all handy functions from the
    wptKeyManagerDlg.cpp. This should help to cleanup the dialog code.
    (km_quote_uid): New.
    (km_check_for_seckey): New.
    (km_check_key_status): New.
    (km_clip_export): New.
    (km_clip_import): New.
    (km_file_export): New.
    (km_file_import): New.
    (km_delete_keys): New.
    (km_send_to_keyserver): New.
    (km_refersh_from_keyserver): New.
    (km_update_default_key_str): New.
        * wptKeygenDlg.cpp (ask_for_backup): New.
        (keygen_dlg_proc): Use new function to give the chance to the
        user for a complete backup.

2001-11-13      Timo Schulz <[email protected]>

        * wptGPG.cpp (get_gpg_optfile): Check for the case the OptFile entry
        is set but to "". Then use default gpg directory.
        * wptKeyManagerDlg.cpp (send_to): New. Context entry for sending keys.
        (refresh_from_keyserver): New. Context entry for update keys.
        (keymisc_dlg_proc): Modify the way the popup is shown.

2001-11-07      Timo Schulz <[email protected]>

        * wptGPG.cpp (set_gpg_default_key): Rewrote the part of changing
        the key id.
        * wptKeyManagerDlg.cpp (file_import): Use force trust to allow secret
        key imports.
        * wptGPGOptDlg.cpp (gpgopt_dlg_proc): If the options file exists and
        the user doesn't set the field, try to do this automatically.

2001-11-03      Timo Schulz <[email protected]>

        (fm_remove_crit_file_attrs): First check if the file exists.
        Thanks to Peter.

2001-11-02      Timo Schulz <[email protected]>

        * WinPT.cpp (WinMain): Add the chance to start the preferences dialog
        in the case a GPG error was detected.
        * wptKeyManagerDlg.cpp (delete_keys): Interface to delete all selected
        keys.

2001-10-30      Timo Schulz <[email protected]>

        * wptHotkey.h: Fixed typo. Thanks to Timo.
        * wptGPG.cpp: (gpg_check_homedir): Fixed memory leak. By Timo.
        (get_gpg_default_key): Skip comment lines immediately.
        * wptRegisty.cpp (get_reg_winpt_prefs): Ditto.
        * wptKeyManagerDlg.cpp (keylist_subclass_proc): New. Procedure
        for subclassing.

        Remove all unsafe WM_NOTIFY stuff because this was propably the
        reason for the crashes. And add as a sanity check if the control
        sent the message.

2001-10-28      Timo Schulz <[email protected]>

        * wptKeyMiscDlg.cpp (key_misc_dlg_proc): New virtual key support
        for ENTER/SPACE and DELETE. Suggested by Graham.
        * wptKeyList.cpp (add_key): New code to figure out how trustworthy
        a expired/revoked secret key is.
        (keylist_enum_recipients): Show the key ID of the key when it's
        revoked.
        * wptFileManager.cpp (fm_decrypt): Parse all PKE packets and not
        only the first to figure out if a secret is available. Thanks to
        Graham.
        * wptFile.cpp (get_keyid_from_file): Ditto.

2001-10-27      Timo Schulz <[email protected]>

        * wptKeylist.cpp (keylist_enum_recipients): Add a type to make
        the code more flexible.
        * wptKeyMiscDlg.cpp (file_import): New.
        (file_export): New.
        * wptKeySigDlg.cpp (recv_missing_keys): Fixed a typo.

        Removed all OE code snippets.

2001-10-26      Timo Schulz <[email protected]>

        * wptExtensions.cpp: Removed.
        * wptLDAPExt.cpp: Removed.
        * wptLDAP.cpp: New. This code now contains a direct interface to
        the WLDAP library so we don't need extra DLL's to handle LDAP keyservers.
        (wldap_init): New.
        (wldap_end): New.
        (ldap_set_verbose): New.
        (ldap_get_key_info): New.
        (ldap_recvkey): New.
        (init_ldap): New. Internal use only.
        (get_key): New. Ditto.
        (send_key): New. Ditto.
        * wptMainProc.cpp (wpt_main_proc): Init and de-init the LDAP dll.

2001-10-25      Timo Schulz <[email protected]>

        * wptGPG.cpp (get_gpg_default_key): Support for the users options file.
        (check_gpg_path): Ditto.
        (get_gpg_options): Ditto.
        (set_gpg_default_key): Ditto.
        (set_gpg_options): Ditto.
        (gpg_check_keyring): Ditto.
        (set_gpg_default_keyid): Fix a typo.
        * wptGPGME.cpp (get_default_keyid): Rewrote most of the code.

2001-10-23      Timo Schulz <[email protected]>

        * wptClipSignDlg.cpp (clip_sign_dlg_proc): Replace for with while
        because it's shorter.
        * wptFileSignDlg.cpp (file_sign_dlg_proc): Use keylist instead of
        the default keyid.
        * wptFileManager.cpp (fm_sign): Remove the default key ID code. Now
        we use the signer from the keylist.
        * wptGPGME.cpp (get_default_keyid): Revamp most of the code and fix
        some silly bugs.
        * WinPT.cpp (WinMain): if there is no valid keyring after the new
        preferences, start the key generation dialog.

2001-10-22      Timo Schulz <[email protected]>

        Remove all MyGPGME code from the main project. Now we use the
        libmygpgme.dll to provide all cryptographic functions and interfaces.

        * wptKeylist.cpp (key_array_new): New.
        (key_array_release): New.
        (key_array_search): New. 
        * wptKeylist.cpp (keylist_add_to_recipients): Check if an untrusted key was
        already checked and don't bother the user if all userid's were selected.
        * wptPassphraseCB.cpp (passphrase_cb_init): Now void.
        (passphrase_cb_gpgme): Ditto.
        (passphrase_callback_proc): Support for a list of recipients.
        * wptImportList.cpp (implist_add_key): Support for secret keys.

2001-10-19  Timo Schulz <[email protected]>

    * wptGPGPrefsDlg.cpp (gpg_prefs_dlg_proc): Support for various
    option files.
    * wptMainProc.cpp (wpt_main_proc): Remove the preferences menu and
    use a popup menu.
    * wptExtensions.cpp (gpgoe_load_plugin): New. Try to load the GPGOE
    plug-in.
    (gpgoe_unload_plugin): New.

2001-10-17  Timo Schulz <[email protected]>

    * wptCurrWnd.cpp (get_window_contents): Only minimize the window
    when the clipboard contains text.
    * wptKeylist.cpp (keylist_add_key): Check only for invalid keys
    in the mainloop. The other flags are checked in the various cases.
    (add_key): Use the ** foo ** notation for invalid flags instead of
    skipping the key.
    * wptKeyMiscDlg.cpp (clip_export): Check for revoked keys and print
    out a warning.
    Change all error messages to one header.
    (check_key_status): Check if the key is valid in the sense of
    revocation and expire dates. If not, print out a warning.
    (keymisc_dlg_proc): Use the new code.

2001-10-16  Timo Schulz <[email protected]>

    * wptW32API.cpp (check_date): New.
    (get_open_filename): New.
    * wptDlgs.cpp (init_dtp): New. Initialize a special common control.
    * wptKeygenDlg.cpp (keygen_dlg_proc): Add support for exipre dates.

2001-10-15  Timo Schulz <[email protected]>

    * wptFileManager.cpp (fm_wipe): New.
    (fm_set_status): Add temporary wipe status and handle default values.
    (fm_parse_files): Use fm_wipe instead of sunlink. Delete all wiped
    files with a successful opeation.
    * wptKeygenCbDlg.cpp (keygen_cb_dlg_proc): New. Static dialog procedure.
    (keygen_cb_thread): New. Static dialog thread.
    (keygen_cb_dlg_create): New. Interface.
    (keygen_cb_dlg_destroy): New. Destroy the dialog.
    (keygen_cb): GPGME interface.

2001-10-13  Timo Schulz <[email protected]>

    Set all ListviewControls to 'NULL' in all dialogs to be more crash
    resistent.

    * wptFileEncryptDlg.cpp (file_encrypt_dlg_proc): Rebuild interface.
    * wptFileExportDlg.cpp (file_export_dlg_proc): Ditto.
    * wptFileImportDlg.cpp (file_import_dlg_proc): Ditto.
    * wptFileSignDlg.cpp (file_sign_dlg_proc): Ditto.
    * wptFileVerifyDlg.cpp (file_verify_dlg_proc): Ditto.
    * wptStringUtil.cpp: Removed.
    * wptFileManager.cpp: Rewrote the complete interface code for
    the file manager.
    * wptFileManagerDlg.cpp: Rewrote the whole file manager dialog.

2001-10-10      Timo Schulz <[email protected]>

        * wptGPG.cpp (set_gpg_default_key): Use spaces if the entry in the
        file is longer then the keyid.
        (get_gpg_default_key): Replaced get_gpg_default_keyid. Check if the
        entry is an userid.
        * wptFileManager.cpp (fm_check_for_entry): New. Avoid to add a file
        more then one time.
        (fm_add_dropped_files): Use it here.
    * wptFileManagerDlg.cpp (file_manager_dlg_proc): Support for common
    keys.

2001-10-09  Timo Schulz <[email protected]>

    * wptFileManagerDlg.cpp (file_manager_dlg_proc): Check the return
    code of sunlink.
    * wptGPG.cpp (get_keyring_from_optfile): New.
    Renamed gpg_errstr to gpg_strerror.
    (set_default_key): New.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Support for default key setting.
    
2001-10-08  Timo Schulz <[email protected]>

    * wptKeyserver (kserver_connect): If the proxy settings are valid,
    use the proxy port instead of the HKP port.
    (kserver_recvkey): Proxy support.
    (kserver_search_init): Ditto.

2001-10-06  Timo Schulz <[email protected]>

    * wptPassphraseCB.cpp (parse_gpg_description): Fixed a memory leak.

2001-10-05  Timo Schulz <[email protected]>

    * wptKeylist.cpp: (addkey): Check if the used userID is not revoked.
    In the case it is, use the first userID.
    * wptKeySubkeyDlg.cpp (key_subkey_dlg_proc): Change the listbox.
    Remove the Pos column and add a status column instead.
    Add expire stuff for subkeys.
    (init_dtp): Initialize the common control.
    * wptClipEditDlg.cpp (clip_edit_dlg_proc): New code to load a file
    into the clipboard.
    * wptKeyPropsDlg.cpp (ot_id_to_string): New. Returns a long description
    of the ownertrust value.
    (keyprops_dlg_proc): Fixed ownertrust handling.

2001-10-04  Timo Schulz <[email protected]>

    * wptPassphraseCB.cpp (parse_gpg_describtion): Free buffer.
    * wptKeyserver.cpp (kserver_search_init): Set buffer to NULL.
    Both were pointed out my Timo (not me ;-)).
    * wptKeylist.cpp (add_key): Fix a typo and now the code is more
    strict with returned attributes.
    * wptKeysignDlg.cpp (keysign_dlg_proc): Modify GPGME interface
    for local signatures.

2001-09-28  Timo Schulz <[email protected]>

    * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): WM_NOTIFY to handle
    the double click messages.
    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Ditto.
    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.
    * wptFileManager.cpp (overwrite_file): Check if the file exists and
    then let the user decide.
    (fm_encrypt): Use the code here.
    (fm_sign): And here.
    (fm_sym_encrypt): And here. Now we use the passphrase dialog.
    (fm_decrypt): And here.
    * wptFile.cpp (unlink_file): Removed. We can use sunlink if we need
    a secure wipe.

    Make the memory checking more strict.

2001-09-27  Timo Schulz <[email protected]>

    * wptMainProc.cpp (wpt_main_proc): Fixed typo. Thanks to Andy who
    discovered this.
    * wptPasswdDlg.cpp (passwd_dlg_proc): New. Handy dialog to get the
    passphrase.
    * wptEditKeyDlg.cpp: Removed. The edit-key code is now moved to
    the various other dialogs to make the use more easier.
    * wptKeyUIDDlg.cpp: (keyuid_dlg_proc): ADDUID code, use it here.
    * wptSubkeyDlg.cpp: (subkey_dlg_proc): ADDKEY code. Ditto.


2001-09-26  Timo Schulz <[email protected]>

    * wptW32API.cpp (listbox_add_string): New. Shortcut to avoid long casts.
    (listbox_get_cursel): Ditto.


2001-09-23  Timo Schulz <[email protected]>

    * wptSubkeyDlg.cpp (key_subkey_dlg_proc): New. Lists the subkeys.
    The same as the userid dialog.
    * wptWndSwitchDlg.cpp: Removed.
    * wptWipeExt.cpp: Removed. Code is now included.
    * wptGPGME.cpp (get_default_keyid): If the keyid from the options
    file is in the keycache.
    * wptKeylist.cpp (keylist_reload): New. Reload a keylist.

2001-09-17  Timo Schulz <[email protected]>

    * wptClipboard.cpp (clip_isalready_secured): Fixed two silly bugs
    who prevent the correct return value in the case of an clipboard error.
    (clip_parse_pgp_id): New. Returns the PGP message type.
    * wptHotkey.cpp (hotkeys_strerror): Fixed bug in the indexes.
    (hotkey_single_register): Return correct error value.
    (hotkey_single_unregister): Ditto.
    * wptW32API.cpp (get_thread_id): Removed.
    (attach_thread_input): Ditto.
    (detach_thread_input): Ditto.
    * wptCurrWnd.cpp (get_window_contents): Store main and focused window
    for later use.
    (set_window_contents): Use the new code.

2001-09-16  Timo Schulz <[email protected]>

    * wptExtensions.h: New. This file is now used for the extenion
    declarations.
    * wptExtensions.new: (register_extensions): New. Enumerate and
    load all possible extensions.
    (unregister_extentions): New. Release all loaded extensions.
    * wptKeyserver.cpp (kserver_load_conf): Added support for different
    keyservers. Currently only HTTP/LDAP.
    * wptKeyserverDlg.cpp (keyserver_dlg_proc): Added LDAP support.
    (hkp_recv_key): Ditto.
    * wptMailPlugin.cpp (oe_set_focus): Fixed silly bug that prevents
    to set the focus.
    * (oe_check_recipient): New. Checks if the key is able to encrypt
    and valid in the sense of revocation.

2001-09-14  Timo Schulz <[email protected]>

    * wptWAB.cpp: (wab_read): New. Interface to read all address book
    entries.
    (wab_open): New. Internal function to load the WAB.
    (wab_release): New. Release the WAB contexts.
    (wab_load): New. Load the contents of the WAB into a linked list.
    (addr_list_new): New. Linked address list.
    (addr_list_add): New.
    (addr_list_release): New.

2001-09-13  Timo Schulz <[email protected]>

    * Revamped the whole plugin code for OE5.
    * wptMailPlugin.cpp (oe_plugin_new): New. Allocates new structure.
    (oe_plugin_releae): New.
    (oe_plugin_init): New. Searches for the OE main window and select
    all the recipients from the fields.
    (oe_get_msg): This code now uses the menu command id's to
    execute the commands.
    (oe_set_msg): Ditto.
    (oe_encrypt): Changed for the new code.
    * wptMainProc.cpp (wpt_main_proc): Re-activate the code.
    * wptHotkeys.cpp: Ditto.
    * Removed the hook project.

2001-09-12  Timo Schulz <[email protected]>

    * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Fixed a format error.
    Thanks to Rich who pointed this out.

2001-09-07  Timo Schulz <[email protected]>

    * wptFileManagerDlg.cpp (file_manager_dlg_proc): Fix memory leaks.

2001-09-05  Timo Schulz <[email protected]>

    * wptKeyMiscDlg.cpp (clip_export): New. Handy function to export keys.
    (clip_import): New. Handy function to import keys.
    * wptKeygenDlg.cpp (keygen_dlg_proc): Added a warning when the passphrase
    is too short.

2001-09-04  Timo Schulz <[email protected]>

    * Rewrote most parts of the keymanager.
    * Ditto for the filemanager.

2001-09-01  Timo Schulz <[email protected]>

    * wptMainProc.cpp (wpt_main_proc): Remove the im- and export operations.
    These code is now part of the key manager.
    * wptKeyPropsDlg.cpp (key_props_dlg): Removed the get_key_xxx functions.
    * wptKeylist.cpp (get_key_algo): New.
    (get_key_created): New.
    (get_key_type): New.
    (get_key_size): New.
    (get_key_fpr): New.
    * wptClipExportDlg.cpp (clip_export_dlg_proc): Removed. This is now
    a part of the keymanager.

2001-08-31  Timo Schulz <[email protected]>

    * wptFileManager.cpp (fm_add_opened_files): New. Use a standard
    file open dialog instead of drag & drop.
    * wptHotkeys.cpp (hotkey_strerror): More detailed information which
    hotkey couldn't set up.
    (hotkey_register_single): Ditto.

2001-08-30  Timo Schulz <[email protected]>

    * wptFilemanager.cpp (fm_encrypt): Add minor changes.
     (fm_decrypt): Ditto.
     (fm_sign): Ditto.
     (fm_verify): Make the code more modular.
     (fm_add_sig_stat): New. For new fm_verify code.

2001-08-28  Timo Schulz <[email protected]>

    * wptKeylist.cpp (strlist_add_recipients): Fixed the listview handling.
    * wptKeyserver.cpp (kserver_load_conf): Proxy support
    (kserver_connect): Ditto.

2001-08-26  Timo Schulz <[email protected]>

    * wptFileManager.cpp (fm_entry_new): New.
    (fm_entry_release): New.
    (fm_state_new): New.
    (fm_state_release). New.
    (fm_get_current_file): New.
    * wptKeylist.cpp (strlist_add_recipients): New.

2001-08-25  Timo Schulz <[email protected]>

    * wptStringUtil.cpp (strlist_new): New. Linked list to hold strings.
    (strlist_release): New. Release the linked list.
    (strlist_add): New.

2001-08-21  Timo Schulz <[email protected]>

    * wptGPG.cpp (get_gpg_default_keyid): Modify the code and now it
    also supports "encrypt-to" entries as default keys.
    * wptWipeExt.cpp (wipe_init_ext): New. Load the DLL to provide
    secure wiping.
    (wipe_deinit_ext): New. Unload the DLL and free all pointer.
    (wipe_loaded_ext): New. Checks wether the DLL was loaded.
    * wptW32API.cpp (set_menu_state): New.

2001-08-20  Timo Schulz <[email protected]>

    * wptGPG.cpp (create_gpg_options): Fixed nul byte bug. Thanks to Thomas.
    * wptPreferencesDlg.cpp (prefs_dlg_proc): Fixed the code to disable
    the hotkeys. Automatically enable or disable the hotkey field depend
    on the switch.

2001-08-17  Timo Schulz <[email protected]>

    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Choose key if there is only
    one by default.
    * wptKeyList.cpp (keylist_add_to_recipients): Ditto.
    * wptGPG.cpp (gpg_check_homedir): Creates the GPGME specific gpgProgram
    entry in the registry in the case it's missing (whenever it's possible!).
    (check_gpg_path): Rewrite parts of the code.

2001-08-11  Timo Schulz <[email protected]>

    * wptKeyPropsDlg.cpp (keyprops_dlg_proc): Beautify the dialog and
    separate the fingerprint from the othr information.
    * wptGPG.cpp (check_opt_keyring): New. Do a sanity check if the
    file, specified in the options line, does exist.

2001-08-08  Timo Schulz <[email protected]>

    * wptGPG.cpp (check_gpg_path): Sanity check for size of the options file.
    Support for more configurations.
    * wptFileSignDlg.cpp (file_sign_dlg_proc): Fixed error in signature mode.
    Add all strings to the translation suite.
    * Updated all NLS dialog strings.
    * wptRFC2440.cpp (get_pkttype): Fixed error to check the CTB.
    * wptFileManager.cpp (fm_decrypt): Support to decrypt armored file,
    with a dynamic callback for the passphrase.

2001-08-06  Timo Schulz <[email protected]>

    * wptFilemanager.cpp (fm_sign): Set the keyid length to 16.

2001-08-05  Timo Schulz <[email protected]>

    * wptKeylist.cpp (keylist_add_key): Change the schematics to support
    all keyids.
    * wptSigList.cpp (siglist_build): New. Interface code to load the
    signature list.
    * wptKeysigDlg.cpp (keysig_dlg_proc): Uses siglist_build.

2001-08-03  Timo Schulz <[email protected]>

    * wptMainProc.cpp (wpt_main_proc): The GPG menu was removed, now
    we support this code in the key manager.
    * wptKeyMisc.cpp (key_misc_dlg_proc): Supports new GPG commands.
    * wptKeyserver.cpp (kserver_index_request), (kserver_recv_request):
    Removed. The code moved into the main functions.
    (kserver_send), (kserver_recv): Ditto.
    (sock_write): Improved code.
    (sock_read): Ditto and some additional timeout.
    (sock_select): New. Figure out the socket state.
    (kserver_search_init): New. Make connection to the server.
    * wptHKPSearchDlg.cpp (hkp_search_dlg_proc): Now it uses the new
    keyserver code.
    * wptFile.cpp (get_keyid_from_file): Add support for the PGP marker
    packet. Thanks to Alan.
    (check_for_symenc_data): Ditto.
    * wptFileManager.cpp (fm_get_file_type): Ditto.
    (fm_decrypt): Move the keycache in the if loop and fix the keycache
    type.

2001-08-02  Timo Schulz <[email protected]>

    * wptGPG.cpp (check_gpg_path): Check the size of both keyrings too.
    Useful in the case the file was generated but it's empty.
    * wptKeyEditDlg.cpp (key_edit_dlg_proc): Fixed some typos.


2001-08-01  Timo Schulz <[email protected]>

    * wptKeyserver.cpp (kserver_urlencode): Create a HTTP compatible
    request for uploading a key.
    (kserver_send_request): Use the urlencode to send the key.
    (sock_read): New. Improved read function to replace recv.
    (sock_write): New. Improved write function to replace send.
    * wptFileManager.cpp (fm_get_file_type): If the data is armored,
    call fm_check_armor_type().
    (fm_check_armor_type): New. Figure out the armor type of the data.
    * wptKeyMisc.cpp (key_misc_dlg_proc): Use a menu instead of the
    buttons. Optimized the code.

2001-07-30  Timo Schulz <[email protected]>

    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Added the interface code
    for the agent.
    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.

2001-07-29  Timo Schulz <[email protected]>

    * wptKeyRevokeDlg.cpp (key_revoke_dlg_proc): New. Dialog for creating
    a key revocation certificate. Add a hint to show how sentensive this
    data is.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Added the code to handle the
    revocation.
    * wptAgent.cpp: Source for the server interface removed.
    (agent_is_avail): New. Checks if the agent is available.
    * wptClipDecryptDlg.cpp (clip_decrypt_dlg): Added the interface code
    for the agent.

2001-07-26  Timo Schulz <[email protected]>

    * wptGPG.cpp (check_gpg_keyring): New. Check if a gpg keyring
    exists. Useful if the keyring was moved during some commands.
    * wptMainProc.cpp (wpt_main_proc): Use the new code. Thanks to
    Rich to discover this.

2001-07-25  Timo Schulz <[email protected]>

    * WinPT.cpp (WinMain): Add a sanity check for the keycache to detect
    serious GPG errors.
    * wptFileManager.cpp (fm_sym_encrypt): New. Symmetric encryption.
    Suggested by Graham.
    (fm_decrypt): Change code to support symmetric decryption.
    (fm_get_file_type): Fixed some typos.

2001-07-24  Timo Schulz <[email protected]>

    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Get new cache context after
    reloading the keycache. Fixed the memory leaks. Thanks to Andreas.
    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Better GPGME callback to inform
    the user about errors.
    * wptKeyTrustPathDlg.cpp (copy_trust_item): New. Copy the GPGME structure
    in our own context.
    (treeview_insert_item): New. Handy function to insert an entry.
    (treeview_create_child_item): New. Insert a trustlist node.
    (treeview_add_trustpath): New. Add recursively the whole trust path
    int the tree view.
    * wptKeysigDlg.cpp (check_for_missing_keys): New. Checks if the
    signature list contains entries with a NOKEY status.
    (recv_missing_keys): New. Receive all keys with a NOKEY as the signature
    status.
    * wptImportList.cpp (implist_load): New. Initialize the listview item
    with an import overview.
    * wptClipImportDlg.cpp (clip_import_dlg_proc): Use implist_load instead
    of the code.
    (print_import_status): Summarize the results. We need this because file
    import needs the same function.
    * wptFileImportDlg.cpp (file_import_dlg_proc): New. Interface for the
    file manager.
    * wptFileManagerDlg.cpp (file_manager_dlg_proc): New code for the key
    import from file.
    * wptFileManager.cpp (fm_import): New. Ditto.
    * wptKeyserver.cpp (kserver_connect): Take care for some return values
    and set the socket to non blocking mode.
    Moved the Winsock2 init code to wptMainProc.cpp
    * wptMainProc.cpp (wpt_main_proc): Wsock2 code.
    * wptHKPSearchDlg.cpp (hkpsearch_dlg_prog): Remove Wsock2 init code.

2001-07-22  Timo Schulz <[email protected]>

     * wptKeyPrefsDlg.cpp (keyprefs_dlg_proc): New.
     (get_key_created): New. Transform ulong timestamp to ascii.
     (get_key_algo): New. Returns a formatted algorithm (depend on subkeys).
     (get_key_size): New. Returns a formatted size depend (depend on subkeys).
     * wptSigList.cpp (siglist_add_key): Fix the timestamp.
     * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Removed "list sigs" and replace
     this with list trust path.
     * wptKeySigDlg.cpp (keysig_dlg_proc): Remove the set_check_mode function
     because we always check the signatures.
     * wptKeyTrustPathDlg.cpp (keytrust_dlg_proc): New.
     
2001-07-21  Timo Schulz <[email protected]>

    * wptFileEncryptDlg.cpp (file_encrypt_dlg_proc): Set cancel mode in
    the case of IDCANCEL.
    * wptFileSignDlg.cpp (file_sign_dlg_proc): Ditto.
    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Check if the key is a key pair
    pair and only if activate the passphrase dlg items.
    Do sanity checks for all buttons that require key pairs.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Support the new code.
    
2001-07-20  Timo Schulz <[email protected]>

    * wptKeyserver.cpp: (kserver_send_request): Correct the octect length
    of the request.
    (check_hkp_response): If an error ocurred, copy the error message into
    the static buffer.
    (kserver_strerror): Interface for the static error buffer.
    * wptKeyserverDlg.cpp (hkp_err_box): Generates a HKP specific message
    box.
    (hkp_send_key): Add more verbose messages at the end.
    (hkp_recv_key): Ditto.
    (check_pattern): Rewrote the entire code to be more bug proof.
    * wptKeylist.cpp (keylist_add_to_recipients): Add a flag to indicate
    that the recipient list contains untrusted entries.
    * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Use the new flag to
    force GPG to add the need options.
    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.

2001-07-19  Timo Schulz <[email protected]>

    * wptClipDecryptDlg.cpp (clip_decrypt_dlg_proc): Support for more
    detailed error messages in the case for a missing key or an included
    signature.

2001-07-17  Timo Schulz <[email protected]>

    * wptKeylist.cpp (keylist_build_small): Support for a minimal keybox
    and increment the 'cols' variable inside the structure for further use.
    (add_key): Watch for the 'cols' variable to figure out how much columns
    are used.
    * wptListView.cpp (listview_set_ext_style): Set an extended style for
    the given listview.
    * wptKeyserverDlg.cpp (keyserver_dlg_proc): Use WM_NOTIFY to save the
    selected server.
    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Ditto.
    * wptKeyserver.cpp (kserver_connect): IP address support. This is faster
    and no DNS lookup is needed.

2001-07-14  Timo Schulz <[email protected]>

    * wptKeylist.cpp (keylist_add_key): Check for secret keys before adding
    it to the signing keylist.
    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Add newline if the passphrase
    is empty.
    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.


2001-07-13  Timo Schulz <[email protected]>

    * wptKeyserver.cpp (kserver_send_request): Add the "keytext" string to
    the request. Arggg!
    (check_hkp_response): Add flag to differ between 'send' and 'recv' mode.


2001-07-12  Timo Schulz <[email protected]>

    * wptClipDecryptDlg.cpp (clip_decrypt_dlg): If the dialog was canceled,
    just quit without any messages. Suggested by Rich.


2001-07-11  Timo Schulz <[email protected]>

    * wptKeyserver.cpp (wsock_strerror): If it's an unknown error, add
    the integer.
    (keyserver_create_conf): Create a config file instead of the error.
    * wptGPG.cpp (create_gpg_options): If the file doesn't exist create
    a default file. This prevents confusing error messages.
    (get_gpg_options): Use new code.
    * wptErrors.cpp (winpt_debug_msg): Improved debug message that tells
    the user how to find the files.

2001-07-05  Timo Schulz <[email protected]>

    * wptHotkey.cpp (mod_hotkeys): Fix a small typo.

2001-07-04  Timo Schulz <[email protected]>

    * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Auto retrieve key
    if the user agree.
    * wptKeylist.cpp (keyload_load): Use the mode from the param, not
    the hardcoded.
    * wptGPGOptDlg.cpp (gpgopt_dlg_proc): Load options file on startup.
    Rename 'load' to 'reload' to make sense with the new code.
    * wptHotkeys.cpp (mod_hotkeys): Rewrite the entire code for the
    registry stuff.
    * wptRegistry.cpp (set_reg_winpt_prefs): Ditto.
    (get_reg_winpt_prefs): Ditto.
    (regist_inst_winpt): Remove the old code.
    (register_single_filetype): Replacement for the old code.

2001-07-01  Timo Schulz <[email protected]>

    * wptFileManager.cpp (fm_verify): New.
    (fm_decrypt): New.
    * wptFileEncryptDlg.cpp (file_encrypt_dlg_proc): New.


2001-06-30  Timo Schulz <[email protected]>

    * wptFilemanagerDlg.cpp (file_manager_dlg_proc): Uses the new passphrase
    code.
    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Ditto.
    * wptClipSignEncDlg.cpp (clip_sign_dlg_proc): Ditto.
    * wptFileManager.cpp: New. (fm_build): New. Initialize the filemanager.
    (fm_delete): New.
    (fm_encrypt): New.
    (fm_get_current_pos): New.
    (fm_get_file_type): New.
    (fm_add_dropped_files): New.

2001-06-29  Timo Schulz <[email protected]>

    * wptClipEditDlg.cpp (clip_edit_dlg_proc): Fix a small bug that prevent
    to send data to the clipboard.
    * wptMainProc.cpp (wpt_main_proc): Change the SetForegroundWindow to
    destroy the window immediately.
    * wptKeyserver.cpp (kserver_getip): Removed.
    (kserver_get_langname): Removed.
    (kserver_load_conf): New. Load the keyserver.conf file and set the
    included keyserver addresses into the global context.
    * WinPT.cpp (WinMain): Add the kserver_load_conf to intialize the
    keyserver context.
    * wptImplist.cpp (get_key_date): New. Transform integer timestamp
    to ISO date.
    (implist_add_key): Now it uses the context instead of all single
    variables.

2001-06-28  Timo Schulz <[email protected]>

    * wptRFC2440.cpp (get_pkttype): Renamed from get_pkt_type and all new
    flag variables to support RFC1991.
    (get_rfc2440_pktlen): Renamed from get_pkt_len to support RFC1991.
    (get_rfc1991_pktlen): Ditto.

2001-06-27  Timo Schulz <[email protected]>

    * wptRFC2440.cpp (get_pkt_type): New. Extract the OpenPGP packet type.
    (get_pkt_len): New. Extract the OpenPGP packet length.
    (parse_pke_sesskey): Read a public key encrypted session key
    but without data.
    * wptFilemanagerDlg.cpp (quote_filename): Do some quotings if the
    filename contains spaces. Just to make GPG happy.
    (file_manager_dlg_proc): Check if the file exist after encryption.
    * wptFile.cpp (get_keyid_from_file): Checks the file for an valid
    packet and then extract the keyid.

2001-06-25  Timo Schulz <[email protected]>

    * wptKeylist.cpp (keylist_load): New. Initialize a keylist item with
    the contents from the given cache context.
    (keylist_add_to_recipients): New. Add the selected keys to the
    recipient set.
    * wptClipEncryptDlg.cpp (clip_encrypt_dlg_proc): Use the new keylist
    function to load the listview.
    * wptClipExportDlg.cpp (clip_export_dlg_proc): Ditto.
    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Ditto.
    * wptClipDecryptDlg.cpp (parse_gpg_describtion): Beautify the userid
    and the keyid hint.

2001-06-24  Timo Schulz <[email protected]>

    * wptGPG.cpp (get_gpg_path): Add null termination to the string.
    Thanks to Jonathan who pointed this out.
    (get_gpg_prog): Ditto.
    (gpg_check_file_ext): Check the file extension for the given GPG
    type.
    (get_gpg_default_keyid): Return null if there isn't an entry in the
    options file.
    * wptKeylist.cpp (add_key): Fixed the wrong return codes of listview_xxx
    style functions.
    * wptImpList.cpp (implist_add_key): Ditto.
    * wptSigList.cpp (siglist_add_key): Ditto.
    * wptVerifyList.cpp (verlist_add_key): Ditto.

2001-06-23  Timo Schulz <[email protected]>

    * wptGPG.cpp (get_gpg_default_keyid): Determine the keyid with the
    options file.

2001-06-22  Timo Schulz <[email protected]>

    * wptHKPSearchDlg.cpp (hkpsearch_dlg_proc): New. Dialog to perform
    keyserver seraching. As an additional feature it's also posible to
    import the keys directly.

2001-06-18  Timo Schulz <[email protected]>

    * wptKeyserver.cpp (check_hkp_response): More detailed error check
    of the http response.
    (kserver_send_request): Debug mode now uses logfile.
    (kserver_recv_request): Ditto.
    (kserver_index_request): New. Create a request for a key index.
    (kserver_send): Now uses check_hkp_response.
    (kserver_recv): Ditto.
    (kserver_search): New. Start the key index loop.
    * wptKeyserverDlg.cpp (recv_key): Check if the key was really
    imported and received.

2001-06-17  Timo Schulz <[email protected]>

    * wptClipSignEncDlg.cpp (clip_signenc_dlg_proc): Force to use the
    default key for signing.

2001-06-16  Timo Schulz <[email protected]>

    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Added missing return.
    Corrected return values.
    * wptErrors.cpp (winpt_strerror): Removed all unused error strings.
    * wptGPG.cpp (get_gpg_path): Change to default path and prevent
    buffer overflows.
    (get_gpg_prog): Ditto.


2001-06-15  Timo Schulz <[email protected]>

    * wptKeylist.cpp (keylist_add_key): Change encrypt param to mode.
    Differ between the new keylist styles.
    * wptGPGME.cpp (keycache_xxx): Move the caching interface to this
    file. For an easier handling between dialogs and code.
    (keycache_rewind): New. Rewind a global keycache context.
    (keycache_next_key): New. Retrieve the next key from the keycache.
    (get_default_key): New. Return the default key, this is the secret
    key with the index 0.
    * wptClipSignDlg.cpp (clip_sign_dlg_proc): Modify the default key
    handling. Now the signer is set in any case. Prevent hanging GPG
    processes.
    * wptSecmem.cpp (vm_safe_init): New. Initialize the safe memory.
    (vm_safe_init_noswap): New. Initialize safe memory with tail data.
    See source for more information.
    (vm_safe_free): New. Free all used pointer and burn all buffers.
    (vm_safe_get): New. Get the begin of the alloced buffer.
    (vm_safe_set_swapfile): New. Set global swapfile name.
    (vm_safe_create_swapfile): New. Creats a swapfile and set its
    contents to zero.

2001-06-12  Timo Schulz <[email protected]>

    * wptPreferencesDlg.cpp (check_hotkey): Check if the hotkey key is
    a big letter, otherwise convert.
    (preferences_dlg_proc): Check hotkeys.
    * wptKeylist.cpp (add_keys): Static functions to add a single key.
    (keylist_add_key): Now it adds all subkeys to the dialog.
    (keylist_alloc): Remove because it's not needed any longer.
    * wptImportList.cpp (implist_alloc): Ditto.    
    * wptSigList.cpp (siglist_alloc): Ditto.
    * wptVerifyList.cpp (verlist_alloc): Ditto.

2001-06-10  Timo Schulz <[email protected]>

    * wptHotkey.cpp (enable_hotkey): New. Set enable flag for a single
    hotkey.
    (mod_hotkeys): Take care of the enable flags.
    (register_hotkeys): Ditto.
    (unregister_hotkeys): Ditto.
    * WinPT.cpp (WinMain): If the registry entry of WinPT doesn't exist,
    don't try to modify hotkeys.
    * WptMainProc.cpp (wpt_main_proc): All message boxes are forced to
    the foreground.

2001-06-08  Timo Schulz <[email protected]>

    * wptHotkey.cpp (mod_hotkeys): Change code to support the new
    registry style.
    * wptRegistry.cpp (get_reg_winpt_prefs): Support to disable
    single hotkeys. Suggested by Jonathan.
    * wptPreferencesDlg.cpp (preferences_dlg_proc): Support to disable
    single hotkeys.
    * wptKeyserver.cpp (kserver_connect): Reset winsock error var.
    (keyserver_recv): Ditto.
    (keyserver_send): Ditto.
    (wsock_strerror): Returns a description of the winsock problem.
    * wptClipboard.cpp (clip_get_pgp_type): Check if the returned buffer
    is valid.

2001-06-07  Timo Schulz <[email protected]>

    * wptOwnertrustDlg.cpp (ownertrust_dlg_proc): Set to foreground,
    add windows title.

2001-06-05  Timo Schulz <[email protected]>

    * wptAboutGPGDlg.cpp (about_gpg_dlg_proc): Check if the returned
    buffer is valid. Remove the fixme, because it's possible that there
    were new cipher modules loaded.
    * wptClipDecryptDlg.cpp (passphrase_callback_proc): Check if the
    context is valid.
    * wptClipEditDlg.cpp (clip_edit_dlg_proc): Check if the context is valid.
    * wptW32API.cpp (status_box): New. Message box that is always forced
    to the foreground.

2001-06-04  Timo Schulz <[email protected]>

    * wptClipImportDlg.cpp (clip_import_dlg_proc): Added the code for
    the improved import status.


2001-06-01  Timo Schulz <[email protected]>

    * wptKeyEditDlg.cpp (keyedit_dlg_proc): IDC_KEYEDIT_OWNERTRUST:
    Release context in the case of an error.
    * wptMainProc.cpp (wpt_main_proc): Fix typo.
    * wptGPG.cpp: (init_gpg_table): Remove the case code. Now we use
    a static gpg object array that contains all filenames.


2001-05-27  Timo Schulz <[email protected]>

    * wptRegistry.cpp (set_reg_winpt_prefs): Add word wrapping.
    (get_reg_winpt_prefs): Ditto.
    * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Set focus after the
    gpg process finished.
    * wptSigList.cpp (siglist_add_key): Parse the numeric timestamp to
    a humand readable date.


2001-05-25  Timo Schulz <[email protected]>

    * wptKeyUidDlg.cpp (keyuid_dlg_proc): Add button to delete a choosen
    user id. End the dialog if there was an error during the Gpgme operations.
    * wptClipboard.cpp (clip_istext_avail): First check if the pointer is
    valid and then look at the length. Avoid crashes for some texts.

2001-05-21  Timo Schulz <[email protected]>

    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Add new button for userid
    management.
    * wptKeyUidDlg.cpp (keyuid_dlg_proc): Finished code to show all userids
    from a special key.

2001-05-20  Timo Schulz <[email protected]>

    * wptGPG.cpp (check_gpg_optfile): Count each of the keyring entries
    to figure out if both parts are available.

2001-05-19  Timo Schulz <[email protected]>

    * wptPreferencesDlg.cpp (preferences_dlg_proc): If the disable hotkey
    flag is set, also disable all input items.
    (disable_dlg_item): New. Disable dialog items (windows).
    * wptMainProc.cpp (wpt_main_proc): Only set hotkeys if the no_hotkeys
    flag isn't set.
    * wptKeyserverDlg.cpp (send_key): Forget to set the armor flag, as
    a result the code only sended parts of the key.
    * wptConfig.cpp: Removed. Not used any longer.

2001-05-18  Timo Schulz <[email protected]>

    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Check the state of the various
    edit key commands. In the case the dialog was canceled, return without
    modifying anything.
    * wptClipVerifyDlg.cpp (clip_verify_dlg_proc): Check the state of the
    signature. If it doesn't contain a valid key, do nothing.
    * wptMainProc: (wpt_main_proc): If the hotkey setup doesn't work, don't
    quit the program. In some cases the hotkeys are possible locked.
    * WinPT.cpp (WinMain): If there is an error with the gpg program/path,
    give the user the chance to start the GPG preference dialog.
    * wptPreferencesDlg.cpp (preferences_dlg_proc): Added the CWS hotkey
    support. Flag to disable all hotkeys. Reload new hotkeys (in the case
    they changed). Load the registry entry on startup.
    * wptHotkey.cpp (mod_hotkeys): Overwrite the default hotkeys with the
    stored registry entries.

2001-05-13  Timo Schulz <[email protected]>

    * wptRegistry.cpp (set_reg_key): Open a subkey, if it doesn't exist
    the function create it.
    (set_reg_winpt_prefs): Use the new function to set the subkey values.
    All functions now return WPTERR_REGISTRY instead of 1.
    Add some error handling to prevent errors in the registry.
    * wptPreferencesDlg.cpp (preferences_dlg): Add the code for the Clipboard
    hotkeys and the caching time.


2001-05-12  Timo Schulz <[email protected]>

    * wptMainProc.cpp (wpt_main_proc): Start the agent before the decryption
    call.

2001-05-11  Timo Schulz <[email protected]>

    * wptMainProc (wpt_main_proc): Change all related menu entries from
    Encrypt & sign to Sign & Encrypt. Added the command to the current
    window menu and the handling of the window messages.
    * wptSignEncDlg.cpp (clip_signenc_dlg_proc): Changed the window text.
    * wptRegistry.cpp (set_reg_winpt_prefs): New. Stores all WinPT
    preferences in the registry.
    (get_reg_winpt_prefs): Read all preferences from the registry into
    the options context.
    * WinPT.cpp (WinMain): Read in the registry preferences at the begin
    and store it.
    * wptAgent.cpp (agent_init): Check if the environment variable
    GPG_AGENT_INFO is set, otherwise set it.
    (agent_is_running): Check wether the agent is running.
    (agent_start): Automated function that read all needed information
    from global variables.

2001-05-10  Timo Schulz <[email protected]>

    * wptFindWnd.cpp (find_window_hwnd): New. Function to retrieve
    the handle of the specified window.
    * wptAgent.cpp (agent_timer_proc): Changed the agent interface
    to window messages instead of socket connections.
    * wptMainProc.cpp (wpt_main_proc): Added the new preference dialog
    and menu entry.
    * wptPreferencesDlg.cpp: New.

2001-05-09  Timo Schulz <[email protected]>

    * wptAgent.cpp (gpga_writen): Write 'n' bytes into a socket.
    (gpga_readn): Read 'n' bytes from a socket.
    (gpga_open): Open the interface to the GPG-Agent.
    (gpga_close): Close the GPG-Agent socket.
    (gpga_clear_passphrase): Clear a passphrase from the GPG-Agent.
    (agent_add_fpr): Add a fingerprint to the cache. If WinPT quits,
    this keys will be remove from the GPG-Agent cache.
    (agent_delete_fpr): Remove a fingerprint from the cache.
    (agent_init): Clear the cache.
    (agent_timer_proc): Remove all stored passphrases which were
    requested through the chache.

2001-05-08  Timo Schulz <[email protected]>

    * wptKeyserver.cpp (wsock_init): Replace the kserver init
    code which initialized the Wsock2 interface.
    (wsock_end): Ditto.
    * wptAgent.cpp: Remove the passphrase caching code and add
    the GPG agent code.

2001-05-05  Timo Schulz <[email protected]>

    * wptCurrWnd.cpp (get_curr_wnd): Alternative code to retrieve
    the current window handle. This code doesn't use the hook DLL.
    Thanks to Oliver Nittka for his patch.
    * wptErrors.cpp (winpt_strerror): Fixed a small typo.
    * wptGPG.cpp (check_last_gpg_access): Remove debug code.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Change the keycache reloading
    scheme to prevent reloading the cache twice.

2001-05-04  Timo Schulz <[email protected]>

    * wptKeyTrustDlg.cpp: Renamed to wptKeyEditOwnertrustDlg.cpp.
    * wptKeyEditOwnertrustDlg.cpp (keyedit_ownertrust_dlg):
    Move all the GPGME specific code to the main dialog. Now only
    the context values are set.
    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Include the changed ownertrust
    code.

2001-05-02  Timo Schulz <[email protected]>

    * wptKeyEditAddSubkeyDlg.cpp: New. Dialog to create additional
    subkeys for the mainkeys.
    * wptKeyEditAddUidDlg.cpp: (keyedit_adduid_dlg_proc): Set foreground
    window flag.
    * wptKeyEditDlg.cpp: (keyedit_dlg_proc): Added the code for the
    addkey feature.

2001-05-01  Timo Schulz <[email protected]>

    * wptCurrWnd.cpp (wnd_msg_markall): New. Send the CTRL+a key sequence
    to a window.
    (wnd_msg_copy): New. Send the CTRL+c key sequence to a window.
    (wnd_msg_paste): New. Send the CTRL+v key sequence to a window.
    (wnd_msg_em_set_pos): Manipulate an edit multiline control text pos.
    * wptMainProc.cpp (wpt_main_proc): Fix some message string for
    the hotkey handling. Quit the program if a registration procedure
    failed.
    * wptErrors.cpp (log_box): Improved log handling to dump states
    of variables during regression tests.

2001-04-30  Timo Schulz <[email protected]>

    * wptClipEditDlg.cpp: Now the dialog uses the Courier font to
    enhance the format of keys and other GPG data.
    * wptKeyserverDlg.cpp (keyserver_dlg_proc): Set the cache realod
    flag after receiving a key.
    * wptKeyTrustDlg.cpp (keytrust_dlg_proc): Add error message when
    no listbox entry was choosen.
    * wptKeySignDlg.cpp (keysign_dlg_proc): Add Check button text to
    the NLS suite.
    * wptKeygenDlg.cpp (keygen_dlg_proc): Set the cache reload flag
    instead of refresh the keycache.

2001-04-29  Timo Schulz <[email protected]>

    * wptKeyEditDlg.cpp (clear_dlg_fields): Clear all passphrase items.
    (keyedit_dlg_proc): Free gpgme context. Add the passphrase for the
    adduid command.
    * wptKeyEditAddUidDlg.cpp (keyedit_adduid_dlg_proc): Initialize
    the dialog with a KEY structure that holds the keyid and the userid.
    * wptWndHook.cpp: Remove the global context and use instead of it
    static variables. Put all static variables into the SHARED data
    segment in the DLL.

2001-04-28  Timo Schulz <[email protected]>

    * wptGPGME.cpp: New. Move some additional GPGME code into WinPT.
    So it's easier to update GPGME and we can use NLS to translate
    error strings.
    * wptVerifyList.cpp (get_sig_date): New. Removed from the GPGME code
    because we only use it here.
    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Add the 'change passphrase'
    feature to the edit-key interface.

2001-04-27  Timo Schulz <[email protected]>

    * wptCurrWnd.cpp (get_window_contents): Change the code for the last
    window concept. Thanks to Oliver.
    (set_window_contents): Add some stuff to set the position if the
    current window is an edit control.
    * wptKeyEditDlg.cpp (keyedit_dlg_proc): Add code for the 'adduid'
    stuff.
    * wptKeyEditAddUidDlg.cpp: New. (keyedit_adduid_dlg_proc): Code to
    create a new user id for a GPG key.

2001-04-26  Timo Schulz <[email protected]>

    * wptKeyEditDlg.cpp (keyedit_dlg_proc): New. Dialog for the various
    edit-key commands.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Add the button for the edit
    key code.

2001-04-25  Timo Schulz <[email protected]>

    * wptKeySignDlg.cpp (keysign_dlg_proc): Now we use a new GPGME
    callback system to pass the keyedit information to GPG.
    * wptKeyTrustDlg.cpp (keytrust_dlg_proc): Ditto.

2001-04-24  Timo Schulz <[email protected]>

    * wptEncryptDlg.cpp (encrypt_dlg_proc): Release the static listview
    item and set it to zero.
    * wptSignDlg.cpp (sign_dlg_proc): Ditto.
    * wptSignEncDlg.cpp (sign_encrypt_dlg_proc): Ditto.
    * wptVerifyDlg.cpp (verify_dlg_proc): Ditto.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Ditto.
    (keymisc_dlg_proc): Provide the functionality to delete key pairs
    secret+public.
    * wptWndHook.cpp (is_winpt_wnd): Remove this function and put
    all code into (check_wnd).
    (check_wnd): Check if the window doesn't is a application related
    window.

2001-04-23  Timo Schulz <[email protected]>

    * wptFindWnd.cpp (find_child_wnd_proc): Removed. This functionality
    is not needed because all dialog windows are top level windows.

2001-04-22  Timo Schulz <[email protected]>

    * wptGPG.cpp (check_last_gpg_access): Reset switch before testing
    the condition.
    * wptFindWnd.cpp (find_child_wnd_proc): New. Callback to enumerate
    all children windows.
    (find_parent_wnd_proc): New. Callback to enumerate all parent windows.
    (find_window): New. Return if the specified windows as found.
    * wptW32API.cpp: (dialog_box_param): New. Alias with the additional
    feature to check if the dialog already exist (and then preventing
    the creation).
    * wptMainProc.cpp (wpt_main_proc): Replace all DialogBoxParam with
    then new dialog_box_param function. Thanks to Martin who told me
    about this dialog problem.
    * wptGPGPrefsDlg.cpp (gpgprefs_dlg_proc): Ditto.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Ditto. Add translation for the
    new signature buttons.

2001-04-21  Timo Schulz <[email protected]>

    * wptWndHook.cpp (install_cbt_hook): Remove the thread because the
    system already is into a DLL.
    * wptKeyMiscDlg.cpp (keymisc_dlg_proc): Remove checkbutton and use
    instead of it a button to check the key signatures.
    * wptGPG.cpp (get_last_gpg_access): New. Retrieve the file timestamp
    from the given gpg object.
    (check_last_gpg_access): New. Compare the last file timestamp with the
    new timestamp.
    (init_gpg_table): New. Initialize the table with gpg objects who shall
    be watched.
    (keyring_check_last_access): Use the new code.
    * wptCurrWnd.cpp (set_window_contents): Restore the window if it is
    now iconic.
    * wptMainProc.cpp (wpt_main_proc): Add decrypt/verify for the
    current window stuff.

2001-04-17  Timo Schulz <[email protected]>

    * wptWndHook.cpp (is_taskbar_wnd): New. Alias to check if the window
    belongs to the taskbar area.
    (is_winpt_wnd): New. Alias to check if the window belongs to WinPT.
    (cbt_proc): Change code to include both functions.
    * wptCurrWnd.cpp (get_window_contents): Add switch if we use the
    foreground or the CBT window.
    * wptMainProc.cpp (wpt_main_proc): All hotkey operations for the
    current window mode set the no_cbt variable.
    * wptGPG.cpp (keyring_check_last_access): New. Check if the keyring
    was modified by an external program.
    * wptKeyMiscDlg.cpp: (keymisc_dlg_proc): Now check for external
    keyring changes.

2001-04-16  Timo Schulz <[email protected]>

    * wptWndHook,cpp (cbt_proc): Compare process ids to differ between
    WinPT and normal windows.
    (install_cbt_hook): Add pid to the context.

2001-04-14  Timo Schulz <[email protected]>

    * wptCurrWnd.cpp: (get_window_contents): Add an event to switch
    the windows. This is needed by the current code.
    (set_window_contents): Ditto.
    * wptWndSwitchDlg.cpp: (wndswitch_dlg_proc): Create a hidden dialog
    and force it to the foreground. This is the event needed by the code
    above.
    (create_wndswitch_event): Execute the dialog.
    * wptMainProc.cpp: (wpt_main_proc): Add new links in the hotkey
    section. Add message entries for the code.
    * wptW32API.cpp: (copy_window_to_clip): Moved to the into the OE
    mailer code.
    (insert_window_from_clip): Ditto.
    * wptMailPlugin.cpp: (oe_set_message): Insert the new code and add
    the event to switch the windows.
    (oe_get_message): Ditto.

2001-04-13  Timo Schulz <[email protected]>

    * wptMailPlugin.cpp: (oe_set_message): Change the id's for
    the attach_thread_input.
    (oe_get_message): Ditto.
    * wptCurrWnd.cpp: (get_window_contents): Ditto.
    (set_window_contents): Ditto.

2001-04-12  Timo Schulz <[email protected]>

    * wptHotkeys.cpp: (register_single_hotkey): Add code for the current
    window stuff.
    * wptMainProc.cpp: (wpt_main_proc): WM_HOTKEY. Add the current window
    hotkeys.
    * wptW32API.cpp: (attach_thread_input): Split up the functions into
    two parts. The attach flags is always set.
    (detach_thread_input): See above. The attach flags is never set.
    * wptCurrWnd.cpp: New. Code for the current window stuff.
    (get_window_contents): Extract the text from the given window to
    the clipboard.
    (set_window_contents): Insert clipboard into the given window.

2001-04-09  Timo Schulz <[email protected]>

    * wptGPG.cpp: (check_line): Ignore empty lines.
    (check_gpg_options): Ditto.

2001-04-09  Timo Schulz <[email protected]>

    * wptClipboard.cpp: (clip_get_pgp_type): New. Return the PGP packet
    type. Kludge for decrypt/verify.
    * wptMainProc.cpp: (wpt_main_proc): Remove verify and put the
    code into the decrypt routine.
    * wptClipImportDlg.cpp: (clip_import_dlg_proc): New button to start
    the key management after import.

2001-04-07  Timo Schulz <[email protected]>

    * wptAgent.cpp: (agent_new): Rename to agent_init and modify source.
    (agent_destroy): Ditto.
    (agent_passphrase_cache): Ditto.
    (agent_passphrase_remove): Ditto.
    (agent_passphrase_get): Ditto.

2001-04-06  Timo Schulz <[email protected]>

    * wptGPG.cpp: (check_gpg_path): Fix a small error.
    * WinPT.cpp: (WinMain): Add a dialog for the possibity that it's the
    first time a user started WinPT.
    * wptClipboard.cpp: (clip_isalready_secured): Check the begin and
    end PGP header.

2001-04-06  Timo Schulz <[email protected]>

    * wptOwnertrustDlg.cpp: New. (ownertrust_dlg_proc): New.
    * wptKeyTrustDlg.cpp: (key_trust_dlg_proc): Add new button for the
    ownertrust dialog.

2001-04-04  Timo Schulz <[email protected]>

    * wptClipDecryptDlg.cpp (passphrase_callback_proc): Remove the static
    passphrase. Now a callback context is used.
    (passphrase_cb): Ditto.
    (clip_decrypt_dlg): Ditto.
    * wptWndHook.cpp (cbt_thread): New. Thread to enable CBT hook.
    (install_cbt_hook): Modify for the new thread model.
    (remove_cbt_hook): Ditto.
    * wptW32API.cpp: (init_crtical_section): New. Make the code MT safe.
    (delete_critical_section): Ditto.
    (lock): Ditto.
    (unlock): Ditto.

2001-04-02  Timo Schulz <[email protected]>

    * WinPT.cpp: (set_gpgme_debug_env): New: Set the environment variable.
    * wptClipSignDlg.cpp: (clip_sign_dlg_proc): Now the keylist widget only
    contains valid keys.
    * wptClipEncryptDlg.cpp: (clip_encrypt_dlg_proc): Ditto.

2001-03-31  Timo Schulz <[email protected]>

    * wptClipSignDlg.cpp: (clip_sign_dlg_proc): If no key was choosen,
    the GPG default key will be used.

2001-03-30  Timo Schulz <[email protected]>

    * wptW32API.cpp: (new_strdup): Remove.
    * wptW32API.h: Ditto.
    * wptWndHook.cpp: (get_cbt_curr_wnd): Return the current window.
    * wptKeygenDlg.cpp: (clear_dlg_fields): New: Clear all text fields.

2001-03-28  Timo Schulz <[email protected]>

    * wptClipEncryptDlg.cpp: (clip_encrypt_dlg_proc):
    Added the keyid to the "no trust" message.
    * wptKeyserverDlg.cpp: (check_pattern): New:
    Do some sanity checks of the search pattern.
    * wptMainProc.cpp: (wpt_main_proc): Add agent support.
    * wptHotkey.cpp: Add agent support.

2001-03-21  Timo Schulz <[email protected]>

    * WinPT.cpp: (WinMain): Re-activate the enable debug switch.
    * wptKeylist.cpp: (keylist_add_key): Ignore invalid keys.

2001-03-20  Timo Schulz <[email protected]>

    * wptClipDecryptDlg.cpp: Rewrote

2001-03-19  Timo Schulz <[email protected]>

    * wptVerifyList.cpp: New control for the verify dialog.
    * wptClipVerifyDlg.cpp: Rewrote

2001-03-18  Timo Schulz <[email protected]>

    * wptClipVerifyDlg.cpp: New: stub for further verify dialogs.
    * wptAgent.cpp: New: Experimental passphrase caching.

2001-03-16  Timo Schulz <[email protected]>

    * wptDlgs.h: Add new dialog callback function.
    * wptKeysigDlg.cpp: New. Key signature listing dialog.

2001-03-15  Timo Schulz <[email protected]>

    * wptClipEncryptDlg.cpp: Fix translation.
    * wptKeygenDlg.cpp: Fix the names of the button (avoid confused users).
    * wptKeymiscDlg.cpp: Fix the key deleting stuff.

2001-02-27  Timo Schulz <[email protected]>

    * wptKeylistWidget.cpp: New. Implementation of a W32 keylist control.
    * wptClipKeytrustDlg.cpp: Index was counted from 0 (should be from 1):
    Fixed.

2001-02-25  Timo Schulz <[email protected]>

    * wptGPGPrefsDlg.cpp: Add some new translation strings.
    * wptKeyGenDlg.cpp: Add all dialog text to the NLS suite.
    * wptMainProc.cpp, wptClipDecryptDlg.cpp: Change to new packet parser.
    * wptClipImportDlg.cpp: Finished basic interface.

2001-02-24  Timo Schulz <[email protected]>

    * wptGPG.cpp: (check_gpg_path): Fix a bug.
   (check_gpg_options): Fix some bugs.

2001-02-22  Timo Schulz <[email protected]>

    * wptGPG.cpp: (check_line): New. Check if the line contains a valid
    gpg argument.
    (check_gpg_options): New. Parses each buffer line to check_line().

2001-02-21  Timo Schulz <[email protected]>

    * wptGPG.cpp: Fix the check_gpg_optfile() code.
        (gpg_errstr): Define some error constants to be more verbose.
        (set_gpg_options): New. Manipulate the options file.
        (get_gpg_options): New. Read in the options file.
    * wptFile.cpp: (get_file_size): New.
    * wptGPGOptDlg.cpp: New. Dialog for editing the options file

2001-02-20  Timo Schulz <[email protected]>

    * wptGPGPrefsDlg.cpp: Add some sanity checks for the value.
    * wptClipImportDlg.cpp: Add some new code.

2001-02-19  Timo Schulz <[email protected]>

    * wptRegistry.cpp: (is_installed): Remove.
    (regist_inst_winpt): Add selfcheck.
    (regist_inst_gpg): New. Add gpg releated registry entries.
    (regist_inst_mo): New. Add nls related path.
    (get_reg_entry), set_reg_entry(): Modify to be more flexible.
    (set_reg_entry_gpg): Handy functions for get_reg_entry.
    (set_reg_entry_mo): Ditto.
    (get_reg_entry_gpg): Ditto.
    (get_reg_entry_mo(): Ditto.
    * wptGPGPrefsDlg.cpp, wptNLS.cpp: Add support for the locale environment.
    * wptGPG.cpp: (check_gpg_optfile): Figure out if the option file.
    include keyring entries (2x)
    (check_gpg_path): Include the check_gpg_optfile() check.

2001-02-17  Timo Schulz <[email protected]>

    * wptRegistry.cpp: (get_reg_entry): Return the GnuPG homedir from
    the registry.
    (set_reg_entry): Set a gnupg registry key.
    * wptGPG.cpp: Modify all function for the use with get_reg_entry().
    * WinPT.cpp: Change the way for the gpg searching mechanism.
    * wptGPGPrefsDlg.cpp: New dialog for dynamic GPG configuration.
    * wptClipImportDlg.cpp: (key import dialog): New.
    * wptKeylistElement.cpp:
    (wpt_lv_implist_build): Build up the key import list.
    (wpt_lv_implist_add_key): Insert a key into the import list.
    (wpt_lv_implist_dummy): Dummy to build up a box with a fixed size.

2001-02-10  Timo Schulz <[email protected]>

    * wptMainProc.cpp: Move ctb_proc and hotkey inits to this file.
    * wptKeylistElement.cpp: New.
    * wptListElement.cpp: Remove.
    * wptW32API.cpp: Insert all lv_*** functions.
    * wptKeylistElement.cpp: (wpt_lv_keylist_release_key): New.
    (wpt_lv_keylist_release_keys): Ditto.
    * wptW32API.cpp: (w32_get_thread_id): New.
    (w32_attach_thread_input): New.
    * wptMailPlugin.cpp: (oe_get_message): Add thread attach mechanism.
    (oe_get_message): Add thread attach mechanism.
    (oe_encrypt): Modify for the attach treach mechanism.
    Add sanity check for recipients.

2001-02-07    Timo Schulz <[email protected]>

    * wptClipEditDlg.cpp: (clip_edit_dlg_proc): Add some sanity checks.
    * wptExportDlg.cpp: (clip_export_dlg_proc): Ditto.

2001-02-04    Timo Schulz <[email protected]>

    * wptSignDlg.cpp: (wpt_sign_proc): Add secret key listing.
    * wptMainProc.cpp: (wpt_main_proc):
    Remove ciphertext checks for signing and encrypting.
    (allow double encryption).

2001-02-03  Timo Schulz <[email protected]>

    * wptMailPlugin.cpp: (oe_find_msg_window): Fix window handles.
    (oe_find_addr_window): Ditto.
    (oe_find_main_window): Ditto.

2001-02-02  Timo Schulz <[email protected]>

    * wptW32API.cpp: (w32_hit_key): New.
    (w32_rel_key): New.
    (w32_copy_to_clip): New.
    (w32_insert_from_clip): New.
    (w32_get_clip_text): New.
    (w32_set_clip_text: New.
    (w32_show_if_icon): New.

2001-02-01 Timo Schulz <[email protected]>

    * wptW32API.cpp: (w32_get_edit_text): New.
    (w32_set_menu_text): New.
    (w32_strdup): New.
    * wptMailPlugin.cpp: (oe_***): New. Basic OE interface.
    * Create all dialogs windows in the foreground.

2001-01-31  Timo Schulz <[email protected]>

    * wptKeygenDlg.cpp: (wpt_keygen_proc): Passphrase sanity check.
    * wptW32API.cpp: New.
    * WinPT.cpp: (WinMain): Change the keyring checking code.

2001-01-29  Timo Schulz <[email protected]>

    * wptClipboard.cpp: (clip_is_already_secure):
    Modify the pgp data detection.

2001-01-28  Timo Schulz <[email protected]>

    * wptHotkey.cpp: (register_hotkey): Hotkey registration.
    (unregister_hotkey): Hotkey removing.
    * wptHokey.h: New.
    * wptWndHook.cpp:
    (wpt_cpt_proc): Window hook to save the current windows.
    * wptWndHoo.h: New.
    * wptMainProc.cpp: (wpt_main_proc): Add hotkey messages.
    * WinPT.cpp: (WinMain): Add hotkey registration.

2001-01-21  Timo Schulz <[email protected]>

    * wptNLS.cpp: ported to C++.
    (gettext): Remove CP850 to ISO88591 conversation.
